blob: 7982be4b0306d54e152c27cb87c7be82234feca1 [file] [log] [blame]
/*
* Copyright (C) 2014 Intel Corporation
*
* DRM universal plane helper functions
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/list.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_atomic_uapi.h>
#include <drm/drm_device.h>
#include <drm/drm_drv.h>
#include <drm/drm_encoder.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_print.h>
#include <drm/drm_rect.h>
#define SUBPIXEL_MASK 0xffff
/**
* DOC: overview
*
* This helper library contains helpers to implement primary plane support on
* top of the normal CRTC configuration interface.
* Since the legacy &drm_mode_config_funcs.set_config interface ties the primary
* plane together with the CRTC state this does not allow userspace to disable
* the primary plane itself. The default primary plane only expose XRBG8888 and
* ARGB8888 as valid pixel formats for the attached framebuffer.
*
* Drivers are highly recommended to implement proper support for primary
* planes, and newly merged drivers must not rely upon these transitional
* helpers.
*
* The plane helpers share the function table structures with other helpers,
* specifically also the atomic helpers. See &struct drm_plane_helper_funcs for
* the details.
*/
/*
* Returns the connectors currently associated with a CRTC. This function
* should be called twice: once with a NULL connector list to retrieve
* the list size, and once with the properly allocated list to be filled in.
*/
static int get_connectors_for_crtc(struct drm_crtc *crtc,
struct drm_connector **connector_list,
int num_connectors)
{
struct drm_device *dev = crtc->dev;
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
int count = 0;
/*
* Note: Once we change the plane hooks to more fine-grained locking we
* need to grab the connection_mutex here to be able to make these
* checks.
*/
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
drm_connector_list_iter_begin(dev, &conn_iter);
drm_for_each_connector_iter(connector, &conn_iter) {
if (connector->encoder && connector->encoder->crtc == crtc) {
if (connector_list != NULL && count < num_connectors)
*(connector_list++) = connector;
count++;
}
}
drm_connector_list_iter_end(&conn_iter);
return count;
}
static int drm_plane_helper_check_update(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_rect *src,
struct drm_rect *dst,
unsigned int rotation,
int min_scale,
int max_scale,
bool can_position,
bool can_update_disabled,
bool *visible)
{
struct drm_plane_state plane_state = {
.plane = plane,
.crtc = crtc,
.fb = fb,
.src_x = src->x1,
.src_y = src->y1,
.src_w = drm_rect_width(src),
.src_h = drm_rect_height(src),
.crtc_x = dst->x1,
.crtc_y = dst->y1,
.crtc_w = drm_rect_width(dst),
.crtc_h = drm_rect_height(dst),
.rotation = rotation,
};
struct drm_crtc_state crtc_state = {
.crtc = crtc,
.enable = crtc->enabled,
.mode = crtc->mode,
};
int ret;
ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
min_scale, max_scale,
can_position,
can_update_disabled);
if (ret)
return ret;
*src = plane_state.src;
*dst = plane_state.dst;
*visible = plane_state.visible;
return 0;
}
/**
* drm_plane_helper_update_primary - Helper for updating primary planes
* @plane: plane to update
* @crtc: the plane's new CRTC
* @fb: the plane's new framebuffer
* @crtc_x: x coordinate within CRTC
* @crtc_y: y coordinate within CRTC
* @crtc_w: width coordinate within CRTC
* @crtc_h: height coordinate within CRTC
* @src_x: x coordinate within source
* @src_y: y coordinate within source
* @src_w: width coordinate within source
* @src_h: height coordinate within source
* @ctx: modeset locking context
*
* This helper validates the given parameters and updates the primary plane.
*
* This function is only useful for non-atomic modesetting. Don't use
* it in new drivers.
*
* Returns:
* Zero on success, or an errno code otherwise.
*/
int drm_plane_helper_update_primary(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_mode_set set = {
.crtc = crtc,
.fb = fb,
.mode = &crtc->mode,
.x = src_x >> 16,
.y = src_y >> 16,
};
struct drm_rect src = {
.x1 = src_x,
.y1 = src_y,
.x2 = src_x + src_w,
.y2 = src_y + src_h,
};
struct drm_rect dest = {
.x1 = crtc_x,
.y1 = crtc_y,
.x2 = crtc_x + crtc_w,
.y2 = crtc_y + crtc_h,
};
struct drm_device *dev = plane->dev;
struct drm_connector **connector_list;
int num_connectors, ret;
bool visible;
if (drm_WARN_ON_ONCE(dev, drm_drv_uses_atomic_modeset(dev)))
return -EINVAL;
ret = drm_plane_helper_check_update(plane, crtc, fb,
&src, &dest,
DRM_MODE_ROTATE_0,
DRM_PLANE_NO_SCALING,
DRM_PLANE_NO_SCALING,
false, false, &visible);
if (ret)
return ret;
if (!visible)
/*
* Primary plane isn't visible. Note that unless a driver
* provides their own disable function, this will just
* wind up returning -EINVAL to userspace.
*/
return plane->funcs->disable_plane(plane, ctx);
/* Find current connectors for CRTC */
num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
BUG_ON(num_connectors == 0);
connector_list = kcalloc(num_connectors, sizeof(*connector_list),
GFP_KERNEL);
if (!connector_list)
return -ENOMEM;
get_connectors_for_crtc(crtc, connector_list, num_connectors);
set.connectors = connector_list;
set.num_connectors = num_connectors;
/*
* We call set_config() directly here rather than using
* drm_mode_set_config_internal. We're reprogramming the same
* connectors that were already in use, so we shouldn't need the extra
* cross-CRTC fb refcounting to accommodate stealing connectors.
* drm_mode_setplane() already handles the basic refcounting for the
* framebuffers involved in this operation.
*/
ret = crtc->funcs->set_config(&set, ctx);
kfree(connector_list);
return ret;
}
EXPORT_SYMBOL(drm_plane_helper_update_primary);
/**
* drm_plane_helper_disable_primary - Helper for disabling primary planes
* @plane: plane to disable
* @ctx: modeset locking context
*
* This helper returns an error when trying to disable the primary
* plane.
*
* This function is only useful for non-atomic modesetting. Don't use
* it in new drivers.
*
* Returns:
* An errno code.
*/
int drm_plane_helper_disable_primary(struct drm_plane *plane,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_device *dev = plane->dev;
drm_WARN_ON_ONCE(dev, drm_drv_uses_atomic_modeset(dev));
return -EINVAL;
}
EXPORT_SYMBOL(drm_plane_helper_disable_primary);
/**
* drm_plane_helper_destroy() - Helper for primary plane destruction
* @plane: plane to destroy
*
* Provides a default plane destroy handler for primary planes. This handler
* is called during CRTC destruction. We disable the primary plane, remove
* it from the DRM plane list, and deallocate the plane structure.
*/
void drm_plane_helper_destroy(struct drm_plane *plane)
{
drm_plane_cleanup(plane);
kfree(plane);
}
EXPORT_SYMBOL(drm_plane_helper_destroy);