blob: af9afdb53c7f5ada5a79614a2b39911bf387a4ad [file] [log] [blame]
/*
* Copyright(c) 2011-2016 Intel Corporation. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Ke Yu
* Zhiyuan Lv <zhiyuan.lv@intel.com>
*
* Contributors:
* Terrence Xu <terrence.xu@intel.com>
* Changbin Du <changbin.du@intel.com>
* Bing Niu <bing.niu@intel.com>
* Zhi Wang <zhi.a.wang@intel.com>
*
*/
#include "display/intel_dp_aux_regs.h"
#include "display/intel_gmbus_regs.h"
#include "gvt.h"
#include "i915_drv.h"
#include "i915_reg.h"
#define GMBUS1_TOTAL_BYTES_SHIFT 16
#define GMBUS1_TOTAL_BYTES_MASK 0x1ff
#define gmbus1_total_byte_count(v) (((v) >> \
GMBUS1_TOTAL_BYTES_SHIFT) & GMBUS1_TOTAL_BYTES_MASK)
#define gmbus1_slave_addr(v) (((v) & 0xff) >> 1)
#define gmbus1_slave_index(v) (((v) >> 8) & 0xff)
#define gmbus1_bus_cycle(v) (((v) >> 25) & 0x7)
/* GMBUS0 bits definitions */
#define _GMBUS_PIN_SEL_MASK (0x7)
static unsigned char edid_get_byte(struct intel_vgpu *vgpu)
{
struct intel_vgpu_i2c_edid *edid = &vgpu->display.i2c_edid;
unsigned char chr = 0;
if (edid->state == I2C_NOT_SPECIFIED || !edid->slave_selected) {
gvt_vgpu_err("Driver tries to read EDID without proper sequence!\n");
return 0;
}
if (edid->current_edid_read >= EDID_SIZE) {
gvt_vgpu_err("edid_get_byte() exceeds the size of EDID!\n");
return 0;
}
if (!edid->edid_available) {
gvt_vgpu_err("Reading EDID but EDID is not available!\n");
return 0;
}
if (intel_vgpu_has_monitor_on_port(vgpu, edid->port)) {
struct intel_vgpu_edid_data *edid_data =
intel_vgpu_port(vgpu, edid->port)->edid;
chr = edid_data->edid_block[edid->current_edid_read];
edid->current_edid_read++;
} else {
gvt_vgpu_err("No EDID available during the reading?\n");
}
return chr;
}
static inline int cnp_get_port_from_gmbus0(u32 gmbus0)
{
int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
int port = -EINVAL;
if (port_select == GMBUS_PIN_1_BXT)
port = PORT_B;
else if (port_select == GMBUS_PIN_2_BXT)
port = PORT_C;
else if (port_select == GMBUS_PIN_3_BXT)
port = PORT_D;
else if (port_select == GMBUS_PIN_4_CNP)
port = PORT_E;
return port;
}
static inline int bxt_get_port_from_gmbus0(u32 gmbus0)
{
int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
int port = -EINVAL;
if (port_select == GMBUS_PIN_1_BXT)
port = PORT_B;
else if (port_select == GMBUS_PIN_2_BXT)
port = PORT_C;
else if (port_select == GMBUS_PIN_3_BXT)
port = PORT_D;
return port;
}
static inline int get_port_from_gmbus0(u32 gmbus0)
{
int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
int port = -EINVAL;
if (port_select == GMBUS_PIN_VGADDC)
port = PORT_E;
else if (port_select == GMBUS_PIN_DPC)
port = PORT_C;
else if (port_select == GMBUS_PIN_DPB)
port = PORT_B;
else if (port_select == GMBUS_PIN_DPD)
port = PORT_D;
return port;
}
static void reset_gmbus_controller(struct intel_vgpu *vgpu)
{
vgpu_vreg_t(vgpu, PCH_GMBUS2) = GMBUS_HW_RDY;
if (!vgpu->display.i2c_edid.edid_available)
vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_SATOER;
vgpu->display.i2c_edid.gmbus.phase = GMBUS_IDLE_PHASE;
}
/* GMBUS0 */
static int gmbus0_mmio_write(struct intel_vgpu *vgpu,
unsigned int offset, void *p_data, unsigned int bytes)
{
struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
int port, pin_select;
memcpy(&vgpu_vreg(vgpu, offset), p_data, bytes);
pin_select = vgpu_vreg(vgpu, offset) & _GMBUS_PIN_SEL_MASK;
intel_vgpu_init_i2c_edid(vgpu);
if (pin_select == 0)
return 0;
if (IS_BROXTON(i915))
port = bxt_get_port_from_gmbus0(pin_select);
else if (IS_COFFEELAKE(i915) || IS_COMETLAKE(i915))
port = cnp_get_port_from_gmbus0(pin_select);
else
port = get_port_from_gmbus0(pin_select);
if (drm_WARN_ON(&i915->drm, port < 0))
return 0;
vgpu->display.i2c_edid.state = I2C_GMBUS;
vgpu->display.i2c_edid.gmbus.phase = GMBUS_IDLE_PHASE;
vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_ACTIVE;
vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_HW_RDY | GMBUS_HW_WAIT_PHASE;
if (intel_vgpu_has_monitor_on_port(vgpu, port) &&
!intel_vgpu_port_is_dp(vgpu, port)) {
vgpu->display.i2c_edid.port = port;
vgpu->display.i2c_edid.edid_available = true;
vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_SATOER;
} else
vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_SATOER;
return 0;
}
static int gmbus1_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
void *p_data, unsigned int bytes)
{
struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid;
u32 slave_addr;
u32 wvalue = *(u32 *)p_data;
if (vgpu_vreg(vgpu, offset) & GMBUS_SW_CLR_INT) {
if (!(wvalue & GMBUS_SW_CLR_INT)) {
vgpu_vreg(vgpu, offset) &= ~GMBUS_SW_CLR_INT;
reset_gmbus_controller(vgpu);
}
/*
* TODO: "This bit is cleared to zero when an event
* causes the HW_RDY bit transition to occur "
*/
} else {
/*
* per bspec setting this bit can cause:
* 1) INT status bit cleared
* 2) HW_RDY bit asserted
*/
if (wvalue & GMBUS_SW_CLR_INT) {
vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_INT;
vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_HW_RDY;
}
/* For virtualization, we suppose that HW is always ready,
* so GMBUS_SW_RDY should always be cleared
*/
if (wvalue & GMBUS_SW_RDY)
wvalue &= ~GMBUS_SW_RDY;
i2c_edid->gmbus.total_byte_count =
gmbus1_total_byte_count(wvalue);
slave_addr = gmbus1_slave_addr(wvalue);
/* vgpu gmbus only support EDID */
if (slave_addr == EDID_ADDR) {
i2c_edid->slave_selected = true;
} else if (slave_addr != 0) {
gvt_dbg_dpy(
"vgpu%d: unsupported gmbus slave addr(0x%x)\n"
" gmbus operations will be ignored.\n",
vgpu->id, slave_addr);
}
if (wvalue & GMBUS_CYCLE_INDEX)
i2c_edid->current_edid_read =
gmbus1_slave_index(wvalue);
i2c_edid->gmbus.cycle_type = gmbus1_bus_cycle(wvalue);
switch (gmbus1_bus_cycle(wvalue)) {
case GMBUS_NOCYCLE:
break;
case GMBUS_STOP:
/* From spec:
* This can only cause a STOP to be generated
* if a GMBUS cycle is generated, the GMBUS is
* currently in a data/wait/idle phase, or it is in a
* WAIT phase
*/
if (gmbus1_bus_cycle(vgpu_vreg(vgpu, offset))
!= GMBUS_NOCYCLE) {
intel_vgpu_init_i2c_edid(vgpu);
/* After the 'stop' cycle, hw state would become
* 'stop phase' and then 'idle phase' after a
* few milliseconds. In emulation, we just set
* it as 'idle phase' ('stop phase' is not
* visible in gmbus interface)
*/
i2c_edid->gmbus.phase = GMBUS_IDLE_PHASE;
vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_ACTIVE;
}
break;
case NIDX_NS_W:
case IDX_NS_W:
case NIDX_STOP:
case IDX_STOP:
/* From hw spec the GMBUS phase
* transition like this:
* START (-->INDEX) -->DATA
*/
i2c_edid->gmbus.phase = GMBUS_DATA_PHASE;
vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_ACTIVE;
break;
default:
gvt_vgpu_err("Unknown/reserved GMBUS cycle detected!\n");
break;
}
/*
* From hw spec the WAIT state will be
* cleared:
* (1) in a new GMBUS cycle
* (2) by generating a stop
*/
vgpu_vreg(vgpu, offset) = wvalue;
}
return 0;
}
static int gmbus3_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
void *p_data, unsigned int bytes)
{
struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
drm_WARN_ON(&i915->drm, 1);
return 0;
}
static int gmbus3_mmio_read(struct intel_vgpu *vgpu, unsigned int offset,
void *p_data, unsigned int bytes)
{
int i;
unsigned char byte_data;
struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid;
int byte_left = i2c_edid->gmbus.total_byte_count -
i2c_edid->current_edid_read;
int byte_count = byte_left;
u32 reg_data = 0;
/* Data can only be recevied if previous settings correct */
if (vgpu_vreg_t(vgpu, PCH_GMBUS1) & GMBUS_SLAVE_READ) {
if (byte_left <= 0) {
memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
return 0;
}
if (byte_count > 4)
byte_count = 4;
for (i = 0; i < byte_count; i++) {
byte_data = edid_get_byte(vgpu);
reg_data |= (byte_data << (i << 3));
}
memcpy(&vgpu_vreg(vgpu, offset), &reg_data, byte_count);
memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
if (byte_left <= 4) {
switch (i2c_edid->gmbus.cycle_type) {
case NIDX_STOP:
case IDX_STOP:
i2c_edid->gmbus.phase = GMBUS_IDLE_PHASE;
break;
case NIDX_NS_W:
case IDX_NS_W:
default:
i2c_edid->gmbus.phase = GMBUS_WAIT_PHASE;
break;
}
intel_vgpu_init_i2c_edid(vgpu);
}
/*
* Read GMBUS3 during send operation,
* return the latest written value
*/
} else {
memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
gvt_vgpu_err("warning: gmbus3 read with nothing returned\n");
}
return 0;
}
static int gmbus2_mmio_read(struct intel_vgpu *vgpu, unsigned int offset,
void *p_data, unsigned int bytes)
{
u32 value = vgpu_vreg(vgpu, offset);
if (!(vgpu_vreg(vgpu, offset) & GMBUS_INUSE))
vgpu_vreg(vgpu, offset) |= GMBUS_INUSE;
memcpy(p_data, (void *)&value, bytes);
return 0;
}
static int gmbus2_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
void *p_data, unsigned int bytes)
{
u32 wvalue = *(u32 *)p_data;
if (wvalue & GMBUS_INUSE)
vgpu_vreg(vgpu, offset) &= ~GMBUS_INUSE;
/* All other bits are read-only */
return 0;
}
/**
* intel_gvt_i2c_handle_gmbus_read - emulate gmbus register mmio read
* @vgpu: a vGPU
* @offset: reg offset
* @p_data: data return buffer
* @bytes: access data length
*
* This function is used to emulate gmbus register mmio read
*
* Returns:
* Zero on success, negative error code if failed.
*
*/
int intel_gvt_i2c_handle_gmbus_read(struct intel_vgpu *vgpu,
unsigned int offset, void *p_data, unsigned int bytes)
{
struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
if (drm_WARN_ON(&i915->drm, bytes > 8 && (offset & (bytes - 1))))
return -EINVAL;
if (offset == i915_mmio_reg_offset(PCH_GMBUS2))
return gmbus2_mmio_read(vgpu, offset, p_data, bytes);
else if (offset == i915_mmio_reg_offset(PCH_GMBUS3))
return gmbus3_mmio_read(vgpu, offset, p_data, bytes);
memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
return 0;
}
/**
* intel_gvt_i2c_handle_gmbus_write - emulate gmbus register mmio write
* @vgpu: a vGPU
* @offset: reg offset
* @p_data: data return buffer
* @bytes: access data length
*
* This function is used to emulate gmbus register mmio write
*
* Returns:
* Zero on success, negative error code if failed.
*
*/
int intel_gvt_i2c_handle_gmbus_write(struct intel_vgpu *vgpu,
unsigned int offset, void *p_data, unsigned int bytes)
{
struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
if (drm_WARN_ON(&i915->drm, bytes > 8 && (offset & (bytes - 1))))
return -EINVAL;
if (offset == i915_mmio_reg_offset(PCH_GMBUS0))
return gmbus0_mmio_write(vgpu, offset, p_data, bytes);
else if (offset == i915_mmio_reg_offset(PCH_GMBUS1))
return gmbus1_mmio_write(vgpu, offset, p_data, bytes);
else if (offset == i915_mmio_reg_offset(PCH_GMBUS2))
return gmbus2_mmio_write(vgpu, offset, p_data, bytes);
else if (offset == i915_mmio_reg_offset(PCH_GMBUS3))
return gmbus3_mmio_write(vgpu, offset, p_data, bytes);
memcpy(&vgpu_vreg(vgpu, offset), p_data, bytes);
return 0;
}
enum {
AUX_CH_CTL = 0,
AUX_CH_DATA1,
AUX_CH_DATA2,
AUX_CH_DATA3,
AUX_CH_DATA4,
AUX_CH_DATA5
};
static inline int get_aux_ch_reg(unsigned int offset)
{
int reg;
switch (offset & 0xff) {
case 0x10:
reg = AUX_CH_CTL;
break;
case 0x14:
reg = AUX_CH_DATA1;
break;
case 0x18:
reg = AUX_CH_DATA2;
break;
case 0x1c:
reg = AUX_CH_DATA3;
break;
case 0x20:
reg = AUX_CH_DATA4;
break;
case 0x24:
reg = AUX_CH_DATA5;
break;
default:
reg = -1;
break;
}
return reg;
}
/**
* intel_gvt_i2c_handle_aux_ch_write - emulate AUX channel register write
* @vgpu: a vGPU
* @port_idx: port index
* @offset: reg offset
* @p_data: write ptr
*
* This function is used to emulate AUX channel register write
*
*/
void intel_gvt_i2c_handle_aux_ch_write(struct intel_vgpu *vgpu,
int port_idx,
unsigned int offset,
void *p_data)
{
struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid;
int msg_length, ret_msg_size;
int msg, addr, ctrl, op;
u32 value = *(u32 *)p_data;
int aux_data_for_write = 0;
int reg = get_aux_ch_reg(offset);
if (reg != AUX_CH_CTL) {
vgpu_vreg(vgpu, offset) = value;
return;
}
msg_length = REG_FIELD_GET(DP_AUX_CH_CTL_MESSAGE_SIZE_MASK, value);
// check the msg in DATA register.
msg = vgpu_vreg(vgpu, offset + 4);
addr = (msg >> 8) & 0xffff;
ctrl = (msg >> 24) & 0xff;
op = ctrl >> 4;
if (!(value & DP_AUX_CH_CTL_SEND_BUSY)) {
/* The ctl write to clear some states */
return;
}
/* Always set the wanted value for vms. */
ret_msg_size = (((op & 0x1) == GVT_AUX_I2C_READ) ? 2 : 1);
vgpu_vreg(vgpu, offset) =
DP_AUX_CH_CTL_DONE |
DP_AUX_CH_CTL_MESSAGE_SIZE(ret_msg_size);
if (msg_length == 3) {
if (!(op & GVT_AUX_I2C_MOT)) {
/* stop */
intel_vgpu_init_i2c_edid(vgpu);
} else {
/* start or restart */
i2c_edid->aux_ch.i2c_over_aux_ch = true;
i2c_edid->aux_ch.aux_ch_mot = true;
if (addr == 0) {
/* reset the address */
intel_vgpu_init_i2c_edid(vgpu);
} else if (addr == EDID_ADDR) {
i2c_edid->state = I2C_AUX_CH;
i2c_edid->port = port_idx;
i2c_edid->slave_selected = true;
if (intel_vgpu_has_monitor_on_port(vgpu,
port_idx) &&
intel_vgpu_port_is_dp(vgpu, port_idx))
i2c_edid->edid_available = true;
}
}
} else if ((op & 0x1) == GVT_AUX_I2C_WRITE) {
/* TODO
* We only support EDID reading from I2C_over_AUX. And
* we do not expect the index mode to be used. Right now
* the WRITE operation is ignored. It is good enough to
* support the gfx driver to do EDID access.
*/
} else {
if (drm_WARN_ON(&i915->drm, (op & 0x1) != GVT_AUX_I2C_READ))
return;
if (drm_WARN_ON(&i915->drm, msg_length != 4))
return;
if (i2c_edid->edid_available && i2c_edid->slave_selected) {
unsigned char val = edid_get_byte(vgpu);
aux_data_for_write = (val << 16);
} else
aux_data_for_write = (0xff << 16);
}
/* write the return value in AUX_CH_DATA reg which includes:
* ACK of I2C_WRITE
* returned byte if it is READ
*/
aux_data_for_write |= GVT_AUX_I2C_REPLY_ACK << 24;
vgpu_vreg(vgpu, offset + 4) = aux_data_for_write;
}
/**
* intel_vgpu_init_i2c_edid - initialize vGPU i2c edid emulation
* @vgpu: a vGPU
*
* This function is used to initialize vGPU i2c edid emulation stuffs
*
*/
void intel_vgpu_init_i2c_edid(struct intel_vgpu *vgpu)
{
struct intel_vgpu_i2c_edid *edid = &vgpu->display.i2c_edid;
edid->state = I2C_NOT_SPECIFIED;
edid->port = -1;
edid->slave_selected = false;
edid->edid_available = false;
edid->current_edid_read = 0;
memset(&edid->gmbus, 0, sizeof(struct intel_vgpu_i2c_gmbus));
edid->aux_ch.i2c_over_aux_ch = false;
edid->aux_ch.aux_ch_mot = false;
}