blob: a0e494c806a96299a6c235154f5d9e4ff5035671 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*/
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_of.h>
#include <drm/drm_panel.h>
#include <drm/drm_vblank.h>
#include "tidss_crtc.h"
#include "tidss_dispc.h"
#include "tidss_drv.h"
#include "tidss_encoder.h"
#include "tidss_kms.h"
#include "tidss_plane.h"
static void tidss_atomic_commit_tail(struct drm_atomic_state *old_state)
{
struct drm_device *ddev = old_state->dev;
struct tidss_device *tidss = to_tidss(ddev);
dev_dbg(ddev->dev, "%s\n", __func__);
tidss_runtime_get(tidss);
drm_atomic_helper_commit_modeset_disables(ddev, old_state);
drm_atomic_helper_commit_planes(ddev, old_state, DRM_PLANE_COMMIT_ACTIVE_ONLY);
drm_atomic_helper_commit_modeset_enables(ddev, old_state);
drm_atomic_helper_commit_hw_done(old_state);
drm_atomic_helper_wait_for_flip_done(ddev, old_state);
drm_atomic_helper_cleanup_planes(ddev, old_state);
tidss_runtime_put(tidss);
}
static const struct drm_mode_config_helper_funcs mode_config_helper_funcs = {
.atomic_commit_tail = tidss_atomic_commit_tail,
};
static int tidss_atomic_check(struct drm_device *ddev,
struct drm_atomic_state *state)
{
struct drm_plane_state *opstate;
struct drm_plane_state *npstate;
struct drm_plane *plane;
struct drm_crtc_state *cstate;
struct drm_crtc *crtc;
int ret, i;
ret = drm_atomic_helper_check(ddev, state);
if (ret)
return ret;
/*
* Add all active planes on a CRTC to the atomic state, if
* x/y/z position or activity of any plane on that CRTC
* changes. This is needed for updating the plane positions in
* tidss_crtc_position_planes() which is called from
* crtc_atomic_enable() and crtc_atomic_flush(). We have an
* extra flag to mark x,y-position changes and together
* with zpos_changed the condition recognizes all the above
* cases.
*/
for_each_oldnew_plane_in_state(state, plane, opstate, npstate, i) {
if (!npstate->crtc || !npstate->visible)
continue;
if (!opstate->crtc || opstate->crtc_x != npstate->crtc_x ||
opstate->crtc_y != npstate->crtc_y) {
cstate = drm_atomic_get_crtc_state(state,
npstate->crtc);
if (IS_ERR(cstate))
return PTR_ERR(cstate);
to_tidss_crtc_state(cstate)->plane_pos_changed = true;
}
}
for_each_new_crtc_in_state(state, crtc, cstate, i) {
if (to_tidss_crtc_state(cstate)->plane_pos_changed ||
cstate->zpos_changed) {
ret = drm_atomic_add_affected_planes(state, crtc);
if (ret)
return ret;
}
}
return 0;
}
static const struct drm_mode_config_funcs mode_config_funcs = {
.fb_create = drm_gem_fb_create,
.atomic_check = tidss_atomic_check,
.atomic_commit = drm_atomic_helper_commit,
};
static int tidss_dispc_modeset_init(struct tidss_device *tidss)
{
struct device *dev = tidss->dev;
unsigned int fourccs_len;
const u32 *fourccs = dispc_plane_formats(tidss->dispc, &fourccs_len);
unsigned int i;
struct pipe {
u32 hw_videoport;
struct drm_bridge *bridge;
u32 enc_type;
};
const struct dispc_features *feat = tidss->feat;
u32 max_vps = feat->num_vps;
u32 max_planes = feat->num_planes;
struct pipe pipes[TIDSS_MAX_PORTS];
u32 num_pipes = 0;
u32 crtc_mask;
/* first find all the connected panels & bridges */
for (i = 0; i < max_vps; i++) {
struct drm_panel *panel;
struct drm_bridge *bridge;
u32 enc_type = DRM_MODE_ENCODER_NONE;
int ret;
ret = drm_of_find_panel_or_bridge(dev->of_node, i, 0,
&panel, &bridge);
if (ret == -ENODEV) {
dev_dbg(dev, "no panel/bridge for port %d\n", i);
continue;
} else if (ret) {
dev_dbg(dev, "port %d probe returned %d\n", i, ret);
return ret;
}
if (panel) {
u32 conn_type;
dev_dbg(dev, "Setting up panel for port %d\n", i);
switch (feat->vp_bus_type[i]) {
case DISPC_VP_OLDI:
enc_type = DRM_MODE_ENCODER_LVDS;
conn_type = DRM_MODE_CONNECTOR_LVDS;
break;
case DISPC_VP_DPI:
enc_type = DRM_MODE_ENCODER_DPI;
conn_type = DRM_MODE_CONNECTOR_DPI;
break;
default:
WARN_ON(1);
return -EINVAL;
}
if (panel->connector_type != conn_type) {
dev_err(dev,
"%s: Panel %s has incompatible connector type for vp%d (%d != %d)\n",
__func__, dev_name(panel->dev), i,
panel->connector_type, conn_type);
return -EINVAL;
}
bridge = devm_drm_panel_bridge_add(dev, panel);
if (IS_ERR(bridge)) {
dev_err(dev,
"failed to set up panel bridge for port %d\n",
i);
return PTR_ERR(bridge);
}
}
pipes[num_pipes].hw_videoport = i;
pipes[num_pipes].bridge = bridge;
pipes[num_pipes].enc_type = enc_type;
num_pipes++;
}
/* all planes can be on any crtc */
crtc_mask = (1 << num_pipes) - 1;
/* then create a plane, a crtc and an encoder for each panel/bridge */
for (i = 0; i < num_pipes; ++i) {
struct tidss_plane *tplane;
struct tidss_crtc *tcrtc;
u32 hw_plane_id = feat->vid_order[tidss->num_planes];
int ret;
tplane = tidss_plane_create(tidss, hw_plane_id,
DRM_PLANE_TYPE_PRIMARY, crtc_mask,
fourccs, fourccs_len);
if (IS_ERR(tplane)) {
dev_err(tidss->dev, "plane create failed\n");
return PTR_ERR(tplane);
}
tidss->planes[tidss->num_planes++] = &tplane->plane;
tcrtc = tidss_crtc_create(tidss, pipes[i].hw_videoport,
&tplane->plane);
if (IS_ERR(tcrtc)) {
dev_err(tidss->dev, "crtc create failed\n");
return PTR_ERR(tcrtc);
}
tidss->crtcs[tidss->num_crtcs++] = &tcrtc->crtc;
ret = tidss_encoder_create(tidss, pipes[i].bridge,
pipes[i].enc_type,
1 << tcrtc->crtc.index);
if (ret) {
dev_err(tidss->dev, "encoder create failed\n");
return ret;
}
}
/* create overlay planes of the leftover planes */
while (tidss->num_planes < max_planes) {
struct tidss_plane *tplane;
u32 hw_plane_id = feat->vid_order[tidss->num_planes];
tplane = tidss_plane_create(tidss, hw_plane_id,
DRM_PLANE_TYPE_OVERLAY, crtc_mask,
fourccs, fourccs_len);
if (IS_ERR(tplane)) {
dev_err(tidss->dev, "plane create failed\n");
return PTR_ERR(tplane);
}
tidss->planes[tidss->num_planes++] = &tplane->plane;
}
return 0;
}
int tidss_modeset_init(struct tidss_device *tidss)
{
struct drm_device *ddev = &tidss->ddev;
int ret;
dev_dbg(tidss->dev, "%s\n", __func__);
ret = drmm_mode_config_init(ddev);
if (ret)
return ret;
ddev->mode_config.min_width = 8;
ddev->mode_config.min_height = 8;
ddev->mode_config.max_width = 8096;
ddev->mode_config.max_height = 8096;
ddev->mode_config.normalize_zpos = true;
ddev->mode_config.funcs = &mode_config_funcs;
ddev->mode_config.helper_private = &mode_config_helper_funcs;
ret = tidss_dispc_modeset_init(tidss);
if (ret)
return ret;
ret = drm_vblank_init(ddev, tidss->num_crtcs);
if (ret)
return ret;
drm_mode_config_reset(ddev);
dev_dbg(tidss->dev, "%s done\n", __func__);
return 0;
}