| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> |
| */ |
| |
| #include "mt7601u.h" |
| #include "trace.h" |
| |
| enum mt76_txq_id { |
| MT_TXQ_VO = IEEE80211_AC_VO, |
| MT_TXQ_VI = IEEE80211_AC_VI, |
| MT_TXQ_BE = IEEE80211_AC_BE, |
| MT_TXQ_BK = IEEE80211_AC_BK, |
| MT_TXQ_PSD, |
| MT_TXQ_MCU, |
| __MT_TXQ_MAX |
| }; |
| |
| /* Hardware uses mirrored order of queues with Q0 having the highest priority */ |
| static u8 q2hwq(u8 q) |
| { |
| return q ^ 0x3; |
| } |
| |
| /* Take mac80211 Q id from the skb and translate it to hardware Q id */ |
| static u8 skb2q(struct sk_buff *skb) |
| { |
| int qid = skb_get_queue_mapping(skb); |
| |
| if (WARN_ON(qid >= MT_TXQ_PSD)) { |
| qid = MT_TXQ_BE; |
| skb_set_queue_mapping(skb, qid); |
| } |
| |
| return q2hwq(qid); |
| } |
| |
| /* Note: TX retry reporting is a bit broken. |
| * Retries are reported only once per AMPDU and often come a frame early |
| * i.e. they are reported in the last status preceding the AMPDU. Apart |
| * from the fact that it's hard to know the length of the AMPDU (which is |
| * required to know to how many consecutive frames retries should be |
| * applied), if status comes early on full FIFO it gets lost and retries |
| * of the whole AMPDU become invisible. |
| * As a work-around encode the desired rate in PKT_ID of TX descriptor |
| * and based on that guess the retries (every rate is tried once). |
| * Only downside here is that for MCS0 we have to rely solely on |
| * transmission failures as no retries can ever be reported. |
| * Not having to read EXT_FIFO has a nice effect of doubling the number |
| * of reports which can be fetched. |
| * Also the vendor driver never uses the EXT_FIFO register so it may be |
| * undertested. |
| */ |
| static u8 mt7601u_tx_pktid_enc(struct mt7601u_dev *dev, u8 rate, bool is_probe) |
| { |
| u8 encoded = (rate + 1) + is_probe * 8; |
| |
| /* Because PKT_ID 0 disables status reporting only 15 values are |
| * available but 16 are needed (8 MCS * 2 for encoding is_probe) |
| * - we need to cram together two rates. MCS0 and MCS7 with is_probe |
| * share PKT_ID 9. |
| */ |
| if (is_probe && rate == 7) |
| return encoded - 7; |
| |
| return encoded; |
| } |
| |
| static void |
| mt7601u_tx_pktid_dec(struct mt7601u_dev *dev, struct mt76_tx_status *stat) |
| { |
| u8 req_rate = stat->pktid; |
| u8 eff_rate = stat->rate & 0x7; |
| |
| req_rate -= 1; |
| |
| if (req_rate > 7) { |
| stat->is_probe = true; |
| req_rate -= 8; |
| |
| /* Decide between MCS0 and MCS7 which share pktid 9 */ |
| if (!req_rate && eff_rate) |
| req_rate = 7; |
| } |
| |
| stat->retry = req_rate - eff_rate; |
| } |
| |
| static void mt7601u_tx_skb_remove_dma_overhead(struct sk_buff *skb, |
| struct ieee80211_tx_info *info) |
| { |
| int pkt_len = (unsigned long)info->status.status_driver_data[0]; |
| |
| skb_pull(skb, sizeof(struct mt76_txwi) + 4); |
| if (ieee80211_get_hdrlen_from_skb(skb) % 4) |
| mt76_remove_hdr_pad(skb); |
| |
| skb_trim(skb, pkt_len); |
| } |
| |
| void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| |
| mt7601u_tx_skb_remove_dma_overhead(skb, info); |
| |
| ieee80211_tx_info_clear_status(info); |
| info->status.rates[0].idx = -1; |
| info->flags |= IEEE80211_TX_STAT_ACK; |
| |
| spin_lock_bh(&dev->mac_lock); |
| ieee80211_tx_status_skb(dev->hw, skb); |
| spin_unlock_bh(&dev->mac_lock); |
| } |
| |
| static int mt7601u_skb_rooms(struct mt7601u_dev *dev, struct sk_buff *skb) |
| { |
| int hdr_len = ieee80211_get_hdrlen_from_skb(skb); |
| u32 need_head; |
| |
| need_head = sizeof(struct mt76_txwi) + 4; |
| if (hdr_len % 4) |
| need_head += 2; |
| |
| return skb_cow(skb, need_head); |
| } |
| |
| static struct mt76_txwi * |
| mt7601u_push_txwi(struct mt7601u_dev *dev, struct sk_buff *skb, |
| struct ieee80211_sta *sta, struct mt76_wcid *wcid, |
| int pkt_len) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_tx_rate *rate = &info->control.rates[0]; |
| struct mt76_txwi *txwi; |
| unsigned long flags; |
| bool is_probe; |
| u32 pkt_id; |
| u16 rate_ctl; |
| u8 nss; |
| |
| txwi = skb_push(skb, sizeof(struct mt76_txwi)); |
| memset(txwi, 0, sizeof(*txwi)); |
| |
| if (!wcid->tx_rate_set) |
| ieee80211_get_tx_rates(info->control.vif, sta, skb, |
| info->control.rates, 1); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (rate->idx < 0 || !rate->count) |
| rate_ctl = wcid->tx_rate; |
| else |
| rate_ctl = mt76_mac_tx_rate_val(dev, rate, &nss); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| txwi->rate_ctl = cpu_to_le16(rate_ctl); |
| |
| if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) |
| txwi->ack_ctl |= MT_TXWI_ACK_CTL_REQ; |
| if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) |
| txwi->ack_ctl |= MT_TXWI_ACK_CTL_NSEQ; |
| |
| if ((info->flags & IEEE80211_TX_CTL_AMPDU) && sta) { |
| u8 ba_size = IEEE80211_MIN_AMPDU_BUF; |
| |
| ba_size <<= sta->deflink.ht_cap.ampdu_factor; |
| ba_size = min_t(int, 63, ba_size); |
| if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) |
| ba_size = 0; |
| txwi->ack_ctl |= FIELD_PREP(MT_TXWI_ACK_CTL_BA_WINDOW, ba_size); |
| |
| txwi->flags = |
| cpu_to_le16(MT_TXWI_FLAGS_AMPDU | |
| FIELD_PREP(MT_TXWI_FLAGS_MPDU_DENSITY, |
| sta->deflink.ht_cap.ampdu_density)); |
| if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) |
| txwi->flags = 0; |
| } |
| |
| txwi->wcid = wcid->idx; |
| |
| is_probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); |
| pkt_id = mt7601u_tx_pktid_enc(dev, rate_ctl & 0x7, is_probe); |
| pkt_len |= FIELD_PREP(MT_TXWI_LEN_PKTID, pkt_id); |
| txwi->len_ctl = cpu_to_le16(pkt_len); |
| |
| return txwi; |
| } |
| |
| void mt7601u_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct mt7601u_dev *dev = hw->priv; |
| struct ieee80211_vif *vif = info->control.vif; |
| struct ieee80211_sta *sta = control->sta; |
| struct mt76_sta *msta = NULL; |
| struct mt76_wcid *wcid = dev->mon_wcid; |
| struct mt76_txwi *txwi; |
| int pkt_len = skb->len; |
| int hw_q = skb2q(skb); |
| |
| BUILD_BUG_ON(ARRAY_SIZE(info->status.status_driver_data) < 1); |
| info->status.status_driver_data[0] = (void *)(unsigned long)pkt_len; |
| |
| if (mt7601u_skb_rooms(dev, skb) || mt76_insert_hdr_pad(skb)) { |
| ieee80211_free_txskb(dev->hw, skb); |
| return; |
| } |
| |
| if (sta) { |
| msta = (struct mt76_sta *) sta->drv_priv; |
| wcid = &msta->wcid; |
| } else if (vif) { |
| struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv; |
| |
| wcid = &mvif->group_wcid; |
| } |
| |
| txwi = mt7601u_push_txwi(dev, skb, sta, wcid, pkt_len); |
| |
| if (mt7601u_dma_enqueue_tx(dev, skb, wcid, hw_q)) |
| return; |
| |
| trace_mt_tx(dev, skb, msta, txwi); |
| } |
| |
| void mt7601u_tx_stat(struct work_struct *work) |
| { |
| struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, |
| stat_work.work); |
| struct mt76_tx_status stat; |
| unsigned long flags; |
| int cleaned = 0; |
| |
| while (!test_bit(MT7601U_STATE_REMOVED, &dev->state)) { |
| stat = mt7601u_mac_fetch_tx_status(dev); |
| if (!stat.valid) |
| break; |
| |
| mt7601u_tx_pktid_dec(dev, &stat); |
| mt76_send_tx_status(dev, &stat); |
| |
| cleaned++; |
| } |
| trace_mt_tx_status_cleaned(dev, cleaned); |
| |
| spin_lock_irqsave(&dev->tx_lock, flags); |
| if (cleaned) |
| queue_delayed_work(dev->stat_wq, &dev->stat_work, |
| msecs_to_jiffies(10)); |
| else if (test_and_clear_bit(MT7601U_STATE_MORE_STATS, &dev->state)) |
| queue_delayed_work(dev->stat_wq, &dev->stat_work, |
| msecs_to_jiffies(20)); |
| else |
| clear_bit(MT7601U_STATE_READING_STATS, &dev->state); |
| spin_unlock_irqrestore(&dev->tx_lock, flags); |
| } |
| |
| int mt7601u_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| unsigned int link_id, u16 queue, |
| const struct ieee80211_tx_queue_params *params) |
| { |
| struct mt7601u_dev *dev = hw->priv; |
| u8 cw_min = 5, cw_max = 10, hw_q = q2hwq(queue); |
| u32 val; |
| |
| /* TODO: should we do funny things with the parameters? |
| * See what mt7601u_set_default_edca() used to do in init.c. |
| */ |
| |
| if (params->cw_min) |
| cw_min = fls(params->cw_min); |
| if (params->cw_max) |
| cw_max = fls(params->cw_max); |
| |
| WARN_ON(params->txop > 0xff); |
| WARN_ON(params->aifs > 0xf); |
| WARN_ON(cw_min > 0xf); |
| WARN_ON(cw_max > 0xf); |
| |
| val = FIELD_PREP(MT_EDCA_CFG_AIFSN, params->aifs) | |
| FIELD_PREP(MT_EDCA_CFG_CWMIN, cw_min) | |
| FIELD_PREP(MT_EDCA_CFG_CWMAX, cw_max); |
| /* TODO: based on user-controlled EnableTxBurst var vendor drv sets |
| * a really long txop on AC0 (see connect.c:2009) but only on |
| * connect? When not connected should be 0. |
| */ |
| if (!hw_q) |
| val |= 0x60; |
| else |
| val |= FIELD_PREP(MT_EDCA_CFG_TXOP, params->txop); |
| mt76_wr(dev, MT_EDCA_CFG_AC(hw_q), val); |
| |
| val = mt76_rr(dev, MT_WMM_TXOP(hw_q)); |
| val &= ~(MT_WMM_TXOP_MASK << MT_WMM_TXOP_SHIFT(hw_q)); |
| val |= params->txop << MT_WMM_TXOP_SHIFT(hw_q); |
| mt76_wr(dev, MT_WMM_TXOP(hw_q), val); |
| |
| val = mt76_rr(dev, MT_WMM_AIFSN); |
| val &= ~(MT_WMM_AIFSN_MASK << MT_WMM_AIFSN_SHIFT(hw_q)); |
| val |= params->aifs << MT_WMM_AIFSN_SHIFT(hw_q); |
| mt76_wr(dev, MT_WMM_AIFSN, val); |
| |
| val = mt76_rr(dev, MT_WMM_CWMIN); |
| val &= ~(MT_WMM_CWMIN_MASK << MT_WMM_CWMIN_SHIFT(hw_q)); |
| val |= cw_min << MT_WMM_CWMIN_SHIFT(hw_q); |
| mt76_wr(dev, MT_WMM_CWMIN, val); |
| |
| val = mt76_rr(dev, MT_WMM_CWMAX); |
| val &= ~(MT_WMM_CWMAX_MASK << MT_WMM_CWMAX_SHIFT(hw_q)); |
| val |= cw_max << MT_WMM_CWMAX_SHIFT(hw_q); |
| mt76_wr(dev, MT_WMM_CWMAX, val); |
| |
| return 0; |
| } |