| # SPDX-License-Identifier: GPL-2.0 |
| # Makefile for net selftests |
| |
| CFLAGS = -Wall -Wl,--no-as-needed -O2 -g |
| CFLAGS += -I../../../../usr/include/ $(KHDR_INCLUDES) |
| # Additional include paths needed by kselftest.h |
| CFLAGS += -I../ |
| |
| TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh \ |
| rtnetlink.sh xfrm_policy.sh test_blackhole_dev.sh |
| TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh |
| TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh |
| TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh |
| TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh |
| TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh traceroute.sh |
| TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh fib_nexthop_nongw.sh |
| TEST_PROGS += altnames.sh icmp.sh icmp_redirect.sh ip6_gre_headroom.sh |
| TEST_PROGS += route_localnet.sh |
| TEST_PROGS += reuseaddr_ports_exhausted.sh |
| TEST_PROGS += txtimestamp.sh |
| TEST_PROGS += vrf-xfrm-tests.sh |
| TEST_PROGS += rxtimestamp.sh |
| TEST_PROGS += devlink_port_split.py |
| TEST_PROGS += drop_monitor_tests.sh |
| TEST_PROGS += vrf_route_leaking.sh |
| TEST_PROGS += bareudp.sh |
| TEST_PROGS += amt.sh |
| TEST_PROGS += unicast_extensions.sh |
| TEST_PROGS += udpgro_fwd.sh |
| TEST_PROGS += udpgro_frglist.sh |
| TEST_PROGS += veth.sh |
| TEST_PROGS += ioam6.sh |
| TEST_PROGS += gro.sh |
| TEST_PROGS += gre_gso.sh |
| TEST_PROGS += cmsg_so_mark.sh |
| TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh |
| TEST_PROGS += netns-name.sh |
| TEST_PROGS += srv6_end_dt46_l3vpn_test.sh |
| TEST_PROGS += srv6_end_dt4_l3vpn_test.sh |
| TEST_PROGS += srv6_end_dt6_l3vpn_test.sh |
| TEST_PROGS += srv6_hencap_red_l3vpn_test.sh |
| TEST_PROGS += srv6_hl2encap_red_l2vpn_test.sh |
| TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh |
| TEST_PROGS += srv6_end_x_next_csid_l3vpn_test.sh |
| TEST_PROGS += srv6_end_flavors_test.sh |
| TEST_PROGS += vrf_strict_mode_test.sh |
| TEST_PROGS += arp_ndisc_evict_nocarrier.sh |
| TEST_PROGS += ndisc_unsolicited_na_test.sh |
| TEST_PROGS += arp_ndisc_untracked_subnets.sh |
| TEST_PROGS += stress_reuseport_listen.sh |
| TEST_PROGS += l2_tos_ttl_inherit.sh |
| TEST_PROGS += bind_bhash.sh |
| TEST_PROGS += ip_local_port_range.sh |
| TEST_PROGS += rps_default_mask.sh |
| TEST_PROGS += big_tcp.sh |
| TEST_PROGS_EXTENDED := toeplitz_client.sh toeplitz.sh |
| TEST_GEN_FILES = socket nettest |
| TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any |
| TEST_GEN_FILES += tcp_mmap tcp_inq psock_snd txring_overwrite |
| TEST_GEN_FILES += udpgso udpgso_bench_tx udpgso_bench_rx ip_defrag |
| TEST_GEN_FILES += so_txtime ipv6_flowlabel ipv6_flowlabel_mgr so_netns_cookie |
| TEST_GEN_FILES += tcp_fastopen_backup_key |
| TEST_GEN_FILES += fin_ack_lat |
| TEST_GEN_FILES += reuseaddr_ports_exhausted |
| TEST_GEN_FILES += hwtstamp_config rxtimestamp timestamping txtimestamp |
| TEST_GEN_FILES += ipsec |
| TEST_GEN_FILES += ioam6_parser |
| TEST_GEN_FILES += gro |
| TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa |
| TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap |
| TEST_GEN_FILES += toeplitz |
| TEST_GEN_FILES += cmsg_sender |
| TEST_GEN_FILES += stress_reuseport_listen |
| TEST_PROGS += test_vxlan_vnifiltering.sh |
| TEST_GEN_FILES += io_uring_zerocopy_tx |
| TEST_PROGS += io_uring_zerocopy_tx.sh |
| TEST_GEN_FILES += bind_bhash |
| TEST_GEN_PROGS += sk_bind_sendto_listen |
| TEST_GEN_PROGS += sk_connect_zero_addr |
| TEST_PROGS += test_ingress_egress_chaining.sh |
| TEST_GEN_PROGS += so_incoming_cpu |
| TEST_PROGS += sctp_vrf.sh |
| TEST_GEN_FILES += sctp_hello |
| TEST_GEN_FILES += csum |
| TEST_GEN_FILES += nat6to4.o |
| TEST_GEN_FILES += xdp_dummy.o |
| TEST_GEN_FILES += ip_local_port_range |
| TEST_GEN_FILES += bind_wildcard |
| TEST_PROGS += test_vxlan_mdb.sh |
| TEST_PROGS += test_bridge_neigh_suppress.sh |
| TEST_PROGS += test_vxlan_nolocalbypass.sh |
| TEST_PROGS += test_bridge_backup_port.sh |
| TEST_PROGS += fdb_flush.sh |
| TEST_PROGS += fq_band_pktlimit.sh |
| TEST_PROGS += vlan_hw_filter.sh |
| |
| TEST_FILES := settings |
| TEST_FILES += in_netns.sh lib.sh net_helper.sh setup_loopback.sh setup_veth.sh |
| |
| TEST_INCLUDES := forwarding/lib.sh |
| |
| include ../lib.mk |
| |
| $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma |
| $(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -lcrypto |
| $(OUTPUT)/tcp_inq: LDLIBS += -lpthread |
| $(OUTPUT)/bind_bhash: LDLIBS += -lpthread |
| $(OUTPUT)/io_uring_zerocopy_tx: CFLAGS += -I../../../include/ |
| |
| # Rules to generate bpf objs |
| CLANG ?= clang |
| SCRATCH_DIR := $(OUTPUT)/tools |
| BUILD_DIR := $(SCRATCH_DIR)/build |
| BPFDIR := $(abspath ../../../lib/bpf) |
| APIDIR := $(abspath ../../../include/uapi) |
| |
| CCINCLUDE += -I../bpf |
| CCINCLUDE += -I../../../../usr/include/ |
| CCINCLUDE += -I$(SCRATCH_DIR)/include |
| |
| BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a |
| |
| MAKE_DIRS := $(BUILD_DIR)/libbpf |
| $(MAKE_DIRS): |
| mkdir -p $@ |
| |
| # Get Clang's default includes on this system, as opposed to those seen by |
| # '--target=bpf'. This fixes "missing" files on some architectures/distros, |
| # such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc. |
| # |
| # Use '-idirafter': Don't interfere with include mechanics except where the |
| # build would have failed anyways. |
| define get_sys_includes |
| $(shell $(1) $(2) -v -E - </dev/null 2>&1 \ |
| | sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \ |
| $(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') |
| endef |
| |
| ifneq ($(CROSS_COMPILE),) |
| CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) |
| endif |
| |
| CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) |
| |
| $(OUTPUT)/nat6to4.o $(OUTPUT)/xdp_dummy.o: $(OUTPUT)/%.o : %.c $(BPFOBJ) | $(MAKE_DIRS) |
| $(CLANG) -O2 --target=bpf -c $< $(CCINCLUDE) $(CLANG_SYS_INCLUDES) -o $@ |
| |
| $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ |
| $(APIDIR)/linux/bpf.h \ |
| | $(BUILD_DIR)/libbpf |
| $(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ |
| EXTRA_CFLAGS='-g -O0' \ |
| DESTDIR=$(SCRATCH_DIR) prefix= all install_headers |
| |
| EXTRA_CLEAN := $(SCRATCH_DIR) |
