drivers/misc/habanalabs/common/pci.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0

 /*
  * Copyright 2016-2019 HabanaLabs, Ltd.
  * All Rights Reserved.
  */

 #include "habanalabs.h"
 #include "../include/hw_ip/pci/pci_general.h"

 #include <linux/pci.h>

 #define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC	(HL_PCI_ELBI_TIMEOUT_MSEC * 10)

 #define IATU_REGION_CTRL_REGION_EN_MASK		BIT(31)
 #define IATU_REGION_CTRL_MATCH_MODE_MASK	BIT(30)
 #define IATU_REGION_CTRL_NUM_MATCH_EN_MASK	BIT(19)
 #define IATU_REGION_CTRL_BAR_NUM_MASK		GENMASK(10, 8)

 /**
  * hl_pci_bars_map() - Map PCI BARs.
  * @hdev: Pointer to hl_device structure.
  * @name: Array of BAR names.
  * @is_wc: Array with flag per BAR whether a write-combined mapping is needed.
  *
  * Request PCI regions and map them to kernel virtual addresses.
  *
  * Return: 0 on success, non-zero for failure.
  */
 int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3],
 			bool is_wc[3])
 {
 	struct pci_dev *pdev = hdev->pdev;
 	int rc, i, bar;

 	rc = pci_request_regions(pdev, HL_NAME);
 	if (rc) {
 		dev_err(hdev->dev, "Cannot obtain PCI resources\n");
 		return rc;
 	}

 	for (i = 0 ; i < 3 ; i++) {
 		bar = i * 2; /* 64-bit BARs */
 		hdev->pcie_bar[bar] = is_wc[i] ?
 				pci_ioremap_wc_bar(pdev, bar) :
 				pci_ioremap_bar(pdev, bar);
 		if (!hdev->pcie_bar[bar]) {
 			dev_err(hdev->dev, "pci_ioremap%s_bar failed for %s\n",
 					is_wc[i] ? "_wc" : "", name[i]);
 			rc = -ENODEV;
 			goto err;
 		}
 	}

 	return 0;

 err:
 	for (i = 2 ; i >= 0 ; i--) {
 		bar = i * 2; /* 64-bit BARs */
 		if (hdev->pcie_bar[bar])
 			iounmap(hdev->pcie_bar[bar]);
 	}

 	pci_release_regions(pdev);

 	return rc;
 }

 /**
  * hl_pci_bars_unmap() - Unmap PCI BARS.
  * @hdev: Pointer to hl_device structure.
  *
  * Release all PCI BARs and unmap their virtual addresses.
  */
 static void hl_pci_bars_unmap(struct hl_device *hdev)
 {
 	struct pci_dev *pdev = hdev->pdev;
 	int i, bar;

 	for (i = 2 ; i >= 0 ; i--) {
 		bar = i * 2; /* 64-bit BARs */
 		iounmap(hdev->pcie_bar[bar]);
 	}

 	pci_release_regions(pdev);
 }

 /**
  * hl_pci_elbi_write() - Write through the ELBI interface.
  * @hdev: Pointer to hl_device structure.
  * @addr: Address to write to
  * @data: Data to write
  *
  * Return: 0 on success, negative value for failure.
  */
 static int hl_pci_elbi_write(struct hl_device *hdev, u64 addr, u32 data)
 {
 	struct pci_dev *pdev = hdev->pdev;
 	ktime_t timeout;
 	u64 msec;
 	u32 val;

 	if (hdev->pldm)
 		msec = HL_PLDM_PCI_ELBI_TIMEOUT_MSEC;
 	else
 		msec = HL_PCI_ELBI_TIMEOUT_MSEC;

 	/* Clear previous status */
 	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, 0);

 	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_ADDR, (u32) addr);
 	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_DATA, data);
 	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_CTRL,
 				PCI_CONFIG_ELBI_CTRL_WRITE);

 	timeout = ktime_add_ms(ktime_get(), msec);
 	for (;;) {
 		pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, &val);
 		if (val & PCI_CONFIG_ELBI_STS_MASK)
 			break;
 		if (ktime_compare(ktime_get(), timeout) > 0) {
 			pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS,
 						&val);
 			break;
 		}

 		usleep_range(300, 500);
 	}

 	if ((val & PCI_CONFIG_ELBI_STS_MASK) == PCI_CONFIG_ELBI_STS_DONE)
 		return 0;

 	if (val & PCI_CONFIG_ELBI_STS_ERR)
 		return -EIO;

 	if (!(val & PCI_CONFIG_ELBI_STS_MASK)) {
 		dev_err(hdev->dev, "ELBI write didn't finish in time\n");
 		return -EIO;
 	}

 	dev_err(hdev->dev, "ELBI write has undefined bits in status\n");
 	return -EIO;
 }

 /**
  * hl_pci_iatu_write() - iatu write routine.
  * @hdev: Pointer to hl_device structure.
  * @addr: Address to write to
  * @data: Data to write
  *
  * Return: 0 on success, negative value for failure.
  */
 int hl_pci_iatu_write(struct hl_device *hdev, u32 addr, u32 data)
 {
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
 	u32 dbi_offset;
 	int rc;

 	dbi_offset = addr & 0xFFF;

 	/* Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
 	 * in case the firmware security is enabled
 	 */
 	hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0x00300000);

 	rc = hl_pci_elbi_write(hdev, prop->pcie_dbi_base_address + dbi_offset,
 				data);

 	if (rc)
 		return -EIO;

 	return 0;
 }

 /**
  * hl_pci_reset_link_through_bridge() - Reset PCI link.
  * @hdev: Pointer to hl_device structure.
  */
 static void hl_pci_reset_link_through_bridge(struct hl_device *hdev)
 {
 	struct pci_dev *pdev = hdev->pdev;
 	struct pci_dev *parent_port;
 	u16 val;

 	parent_port = pdev->bus->self;
 	pci_read_config_word(parent_port, PCI_BRIDGE_CONTROL, &val);
 	val |= PCI_BRIDGE_CTL_BUS_RESET;
 	pci_write_config_word(parent_port, PCI_BRIDGE_CONTROL, val);
 	ssleep(1);

 	val &= ~(PCI_BRIDGE_CTL_BUS_RESET);
 	pci_write_config_word(parent_port, PCI_BRIDGE_CONTROL, val);
 	ssleep(3);
 }

 /**
  * hl_pci_set_inbound_region() - Configure inbound region
  * @hdev: Pointer to hl_device structure.
  * @region: Inbound region number.
  * @pci_region: Inbound region parameters.
  *
  * Configure the iATU inbound region.
  *
  * Return: 0 on success, negative value for failure.
  */
 int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
 		struct hl_inbound_pci_region *pci_region)
 {
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
 	u64 bar_phys_base, region_base, region_end_address;
 	u32 offset, ctrl_reg_val;
 	int rc = 0;

 	/* region offset */
 	offset = (0x200 * region) + 0x100;

 	if (pci_region->mode == PCI_ADDRESS_MATCH_MODE) {
 		bar_phys_base = hdev->pcie_bar_phys[pci_region->bar];
 		region_base = bar_phys_base + pci_region->offset_in_bar;
 		region_end_address = region_base + pci_region->size - 1;

 		rc |= hl_pci_iatu_write(hdev, offset + 0x8,
 				lower_32_bits(region_base));
 		rc |= hl_pci_iatu_write(hdev, offset + 0xC,
 				upper_32_bits(region_base));
 		rc |= hl_pci_iatu_write(hdev, offset + 0x10,
 				lower_32_bits(region_end_address));
 	}

 	/* Point to the specified address */
 	rc |= hl_pci_iatu_write(hdev, offset + 0x14,
 			lower_32_bits(pci_region->addr));
 	rc |= hl_pci_iatu_write(hdev, offset + 0x18,
 			upper_32_bits(pci_region->addr));
 	rc |= hl_pci_iatu_write(hdev, offset + 0x0, 0);

 	/* Enable + bar/address match + match enable + bar number */
 	ctrl_reg_val = FIELD_PREP(IATU_REGION_CTRL_REGION_EN_MASK, 1);
 	ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_MATCH_MODE_MASK,
 			pci_region->mode);
 	ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_NUM_MATCH_EN_MASK, 1);

 	if (pci_region->mode == PCI_BAR_MATCH_MODE)
 		ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_BAR_NUM_MASK,
 				pci_region->bar);

 	rc |= hl_pci_iatu_write(hdev, offset + 0x4, ctrl_reg_val);

 	/* Return the DBI window to the default location
 	 * Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
 	 * in case the firmware security is enabled
 	 */
 	hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);

 	if (rc)
 		dev_err(hdev->dev, "failed to map bar %u to 0x%08llx\n",
 				pci_region->bar, pci_region->addr);

 	return rc;
 }

 /**
  * hl_pci_set_outbound_region() - Configure outbound region 0
  * @hdev: Pointer to hl_device structure.
  * @pci_region: Outbound region parameters.
  *
  * Configure the iATU outbound region 0.
  *
  * Return: 0 on success, negative value for failure.
  */
 int hl_pci_set_outbound_region(struct hl_device *hdev,
 		struct hl_outbound_pci_region *pci_region)
 {
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
 	u64 outbound_region_end_address;
 	int rc = 0;

 	/* Outbound Region 0 */
 	outbound_region_end_address =
 			pci_region->addr + pci_region->size - 1;
 	rc |= hl_pci_iatu_write(hdev, 0x008,
 				lower_32_bits(pci_region->addr));
 	rc |= hl_pci_iatu_write(hdev, 0x00C,
 				upper_32_bits(pci_region->addr));
 	rc |= hl_pci_iatu_write(hdev, 0x010,
 				lower_32_bits(outbound_region_end_address));
 	rc |= hl_pci_iatu_write(hdev, 0x014, 0);

 	if ((hdev->power9_64bit_dma_enable) && (hdev->dma_mask == 64))
 		rc |= hl_pci_iatu_write(hdev, 0x018, 0x08000000);
 	else
 		rc |= hl_pci_iatu_write(hdev, 0x018, 0);

 	rc |= hl_pci_iatu_write(hdev, 0x020,
 				upper_32_bits(outbound_region_end_address));
 	/* Increase region size */
 	rc |= hl_pci_iatu_write(hdev, 0x000, 0x00002000);
 	/* Enable */
 	rc |= hl_pci_iatu_write(hdev, 0x004, 0x80000000);

 	/* Return the DBI window to the default location
 	 * Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
 	 * in case the firmware security is enabled
 	 */
 	hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);

 	return rc;
 }

 /**
  * hl_pci_set_dma_mask() - Set DMA masks for the device.
  * @hdev: Pointer to hl_device structure.
  *
  * This function sets the DMA masks (regular and consistent) for a specified
  * value. If it doesn't succeed, it tries to set it to a fall-back value
  *
  * Return: 0 on success, non-zero for failure.
  */
 static int hl_pci_set_dma_mask(struct hl_device *hdev)
 {
 	struct pci_dev *pdev = hdev->pdev;
 	int rc;

 	/* set DMA mask */
 	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(hdev->dma_mask));
 	if (rc) {
 		dev_err(hdev->dev,
 			"Failed to set pci dma mask to %d bits, error %d\n",
 			hdev->dma_mask, rc);
 		return rc;
 	}

 	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(hdev->dma_mask));
 	if (rc) {
 		dev_err(hdev->dev,
 			"Failed to set pci consistent dma mask to %d bits, error %d\n",
 			hdev->dma_mask, rc);
 		return rc;
 	}

 	return 0;
 }

 /**
  * hl_pci_init() - PCI initialization code.
  * @hdev: Pointer to hl_device structure.
  *
  * Set DMA masks, initialize the PCI controller and map the PCI BARs.
  *
  * Return: 0 on success, non-zero for failure.
  */
 int hl_pci_init(struct hl_device *hdev)
 {
 	struct pci_dev *pdev = hdev->pdev;
 	int rc;

 	if (hdev->reset_pcilink)
 		hl_pci_reset_link_through_bridge(hdev);

 	rc = pci_enable_device_mem(pdev);
 	if (rc) {
 		dev_err(hdev->dev, "can't enable PCI device\n");
 		return rc;
 	}

 	pci_set_master(pdev);

 	rc = hdev->asic_funcs->pci_bars_map(hdev);
 	if (rc) {
 		dev_err(hdev->dev, "Failed to initialize PCI BARs\n");
 		goto disable_device;
 	}

 	rc = hdev->asic_funcs->init_iatu(hdev);
 	if (rc) {
 		dev_err(hdev->dev, "Failed to initialize iATU\n");
 		goto unmap_pci_bars;
 	}

 	rc = hl_pci_set_dma_mask(hdev);
 	if (rc)
 		goto unmap_pci_bars;

 	return 0;

 unmap_pci_bars:
 	hl_pci_bars_unmap(hdev);
 disable_device:
 	pci_clear_master(pdev);
 	pci_disable_device(pdev);

 	return rc;
 }

 /**
  * hl_fw_fini() - PCI finalization code.
  * @hdev: Pointer to hl_device structure
  *
  * Unmap PCI bars and disable PCI device.
  */
 void hl_pci_fini(struct hl_device *hdev)
 {
 	hl_pci_bars_unmap(hdev);

 	pci_clear_master(hdev->pdev);
 	pci_disable_device(hdev->pdev);
 }
	// SPDX-License-Identifier: GPL-2.0

	/*
	* Copyright 2016-2019 HabanaLabs, Ltd.
	* All Rights Reserved.
	*/

	#include "habanalabs.h"
	#include "../include/hw_ip/pci/pci_general.h"

	#include <linux/pci.h>

	#define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC (HL_PCI_ELBI_TIMEOUT_MSEC * 10)

	#define IATU_REGION_CTRL_REGION_EN_MASK BIT(31)
	#define IATU_REGION_CTRL_MATCH_MODE_MASK BIT(30)
	#define IATU_REGION_CTRL_NUM_MATCH_EN_MASK BIT(19)
	#define IATU_REGION_CTRL_BAR_NUM_MASK GENMASK(10, 8)

	/**
	* hl_pci_bars_map() - Map PCI BARs.
	* @hdev: Pointer to hl_device structure.
	* @name: Array of BAR names.
	* @is_wc: Array with flag per BAR whether a write-combined mapping is needed.
	*
	* Request PCI regions and map them to kernel virtual addresses.
	*
	* Return: 0 on success, non-zero for failure.
	*/
	int hl_pci_bars_map(struct hl_device hdev, const char const name[3],
	bool is_wc[3])
	{
	struct pci_dev *pdev = hdev->pdev;
	int rc, i, bar;

	rc = pci_request_regions(pdev, HL_NAME);
	if (rc) {
	dev_err(hdev->dev, "Cannot obtain PCI resources\n");
	return rc;
	}

	for (i = 0 ; i < 3 ; i++) {
	bar = i * 2; /* 64-bit BARs */
	hdev->pcie_bar[bar] = is_wc[i] ?
	pci_ioremap_wc_bar(pdev, bar) :
	pci_ioremap_bar(pdev, bar);
	if (!hdev->pcie_bar[bar]) {
	dev_err(hdev->dev, "pci_ioremap%s_bar failed for %s\n",
	is_wc[i] ? "_wc" : "", name[i]);
	rc = -ENODEV;
	goto err;
	}
	}

	return 0;

	err:
	for (i = 2 ; i >= 0 ; i--) {
	bar = i * 2; /* 64-bit BARs */
	if (hdev->pcie_bar[bar])
	iounmap(hdev->pcie_bar[bar]);
	}

	pci_release_regions(pdev);

	return rc;
	}

	/**
	* hl_pci_bars_unmap() - Unmap PCI BARS.
	* @hdev: Pointer to hl_device structure.
	*
	* Release all PCI BARs and unmap their virtual addresses.
	*/
	static void hl_pci_bars_unmap(struct hl_device *hdev)
	{
	struct pci_dev *pdev = hdev->pdev;
	int i, bar;

	for (i = 2 ; i >= 0 ; i--) {
	bar = i * 2; /* 64-bit BARs */
	iounmap(hdev->pcie_bar[bar]);
	}

	pci_release_regions(pdev);
	}

	/**
	* hl_pci_elbi_write() - Write through the ELBI interface.
	* @hdev: Pointer to hl_device structure.
	* @addr: Address to write to
	* @data: Data to write
	*
	* Return: 0 on success, negative value for failure.
	*/
	static int hl_pci_elbi_write(struct hl_device *hdev, u64 addr, u32 data)
	{
	struct pci_dev *pdev = hdev->pdev;
	ktime_t timeout;
	u64 msec;
	u32 val;

	if (hdev->pldm)
	msec = HL_PLDM_PCI_ELBI_TIMEOUT_MSEC;
	else
	msec = HL_PCI_ELBI_TIMEOUT_MSEC;

	/* Clear previous status */
	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, 0);

	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_ADDR, (u32) addr);
	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_DATA, data);
	pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_CTRL,
	PCI_CONFIG_ELBI_CTRL_WRITE);

	timeout = ktime_add_ms(ktime_get(), msec);
	for (;;) {
	pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, &val);
	if (val & PCI_CONFIG_ELBI_STS_MASK)
	break;
	if (ktime_compare(ktime_get(), timeout) > 0) {
	pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS,
	&val);
	break;
	}

	usleep_range(300, 500);
	}

	if ((val & PCI_CONFIG_ELBI_STS_MASK) == PCI_CONFIG_ELBI_STS_DONE)
	return 0;

	if (val & PCI_CONFIG_ELBI_STS_ERR)
	return -EIO;

	if (!(val & PCI_CONFIG_ELBI_STS_MASK)) {
	dev_err(hdev->dev, "ELBI write didn't finish in time\n");
	return -EIO;
	}

	dev_err(hdev->dev, "ELBI write has undefined bits in status\n");
	return -EIO;
	}

	/**
	* hl_pci_iatu_write() - iatu write routine.
	* @hdev: Pointer to hl_device structure.
	* @addr: Address to write to
	* @data: Data to write
	*
	* Return: 0 on success, negative value for failure.
	*/
	int hl_pci_iatu_write(struct hl_device *hdev, u32 addr, u32 data)
	{
	struct asic_fixed_properties *prop = &hdev->asic_prop;
	u32 dbi_offset;
	int rc;

	dbi_offset = addr & 0xFFF;

	/* Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
	* in case the firmware security is enabled
	*/
	hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0x00300000);

	rc = hl_pci_elbi_write(hdev, prop->pcie_dbi_base_address + dbi_offset,
	data);

	if (rc)
	return -EIO;

	return 0;
	}

	/**
	* hl_pci_reset_link_through_bridge() - Reset PCI link.
	* @hdev: Pointer to hl_device structure.
	*/
	static void hl_pci_reset_link_through_bridge(struct hl_device *hdev)
	{
	struct pci_dev *pdev = hdev->pdev;
	struct pci_dev *parent_port;
	u16 val;

	parent_port = pdev->bus->self;
	pci_read_config_word(parent_port, PCI_BRIDGE_CONTROL, &val);
	val \|= PCI_BRIDGE_CTL_BUS_RESET;
	pci_write_config_word(parent_port, PCI_BRIDGE_CONTROL, val);
	ssleep(1);

	val &= ~(PCI_BRIDGE_CTL_BUS_RESET);
	pci_write_config_word(parent_port, PCI_BRIDGE_CONTROL, val);
	ssleep(3);
	}

	/**
	* hl_pci_set_inbound_region() - Configure inbound region
	* @hdev: Pointer to hl_device structure.
	* @region: Inbound region number.
	* @pci_region: Inbound region parameters.
	*
	* Configure the iATU inbound region.
	*
	* Return: 0 on success, negative value for failure.
	*/
	int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
	struct hl_inbound_pci_region *pci_region)
	{
	struct asic_fixed_properties *prop = &hdev->asic_prop;
	u64 bar_phys_base, region_base, region_end_address;
	u32 offset, ctrl_reg_val;
	int rc = 0;

	/* region offset */
	offset = (0x200 * region) + 0x100;

	if (pci_region->mode == PCI_ADDRESS_MATCH_MODE) {
	bar_phys_base = hdev->pcie_bar_phys[pci_region->bar];
	region_base = bar_phys_base + pci_region->offset_in_bar;
	region_end_address = region_base + pci_region->size - 1;

	rc \|= hl_pci_iatu_write(hdev, offset + 0x8,
	lower_32_bits(region_base));
	rc \|= hl_pci_iatu_write(hdev, offset + 0xC,
	upper_32_bits(region_base));
	rc \|= hl_pci_iatu_write(hdev, offset + 0x10,
	lower_32_bits(region_end_address));
	}

	/* Point to the specified address */
	rc \|= hl_pci_iatu_write(hdev, offset + 0x14,
	lower_32_bits(pci_region->addr));
	rc \|= hl_pci_iatu_write(hdev, offset + 0x18,
	upper_32_bits(pci_region->addr));
	rc \|= hl_pci_iatu_write(hdev, offset + 0x0, 0);

	/* Enable + bar/address match + match enable + bar number */
	ctrl_reg_val = FIELD_PREP(IATU_REGION_CTRL_REGION_EN_MASK, 1);
	ctrl_reg_val \|= FIELD_PREP(IATU_REGION_CTRL_MATCH_MODE_MASK,
	pci_region->mode);
	ctrl_reg_val \|= FIELD_PREP(IATU_REGION_CTRL_NUM_MATCH_EN_MASK, 1);

	if (pci_region->mode == PCI_BAR_MATCH_MODE)
	ctrl_reg_val \|= FIELD_PREP(IATU_REGION_CTRL_BAR_NUM_MASK,
	pci_region->bar);

	rc \|= hl_pci_iatu_write(hdev, offset + 0x4, ctrl_reg_val);

	/* Return the DBI window to the default location
	* Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
	* in case the firmware security is enabled
	*/
	hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);

	if (rc)
	dev_err(hdev->dev, "failed to map bar %u to 0x%08llx\n",
	pci_region->bar, pci_region->addr);

	return rc;
	}

	/**
	* hl_pci_set_outbound_region() - Configure outbound region 0
	* @hdev: Pointer to hl_device structure.
	* @pci_region: Outbound region parameters.
	*
	* Configure the iATU outbound region 0.
	*
	* Return: 0 on success, negative value for failure.
	*/
	int hl_pci_set_outbound_region(struct hl_device *hdev,
	struct hl_outbound_pci_region *pci_region)
	{
	struct asic_fixed_properties *prop = &hdev->asic_prop;
	u64 outbound_region_end_address;
	int rc = 0;

	/* Outbound Region 0 */
	outbound_region_end_address =
	pci_region->addr + pci_region->size - 1;
	rc \|= hl_pci_iatu_write(hdev, 0x008,
	lower_32_bits(pci_region->addr));
	rc \|= hl_pci_iatu_write(hdev, 0x00C,
	upper_32_bits(pci_region->addr));
	rc \|= hl_pci_iatu_write(hdev, 0x010,
	lower_32_bits(outbound_region_end_address));
	rc \|= hl_pci_iatu_write(hdev, 0x014, 0);

	if ((hdev->power9_64bit_dma_enable) && (hdev->dma_mask == 64))
	rc \|= hl_pci_iatu_write(hdev, 0x018, 0x08000000);
	else
	rc \|= hl_pci_iatu_write(hdev, 0x018, 0);

	rc \|= hl_pci_iatu_write(hdev, 0x020,
	upper_32_bits(outbound_region_end_address));
	/* Increase region size */
	rc \|= hl_pci_iatu_write(hdev, 0x000, 0x00002000);
	/* Enable */
	rc \|= hl_pci_iatu_write(hdev, 0x004, 0x80000000);

	/* Return the DBI window to the default location
	* Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
	* in case the firmware security is enabled
	*/
	hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);

	return rc;
	}

	/**
	* hl_pci_set_dma_mask() - Set DMA masks for the device.
	* @hdev: Pointer to hl_device structure.
	*
	* This function sets the DMA masks (regular and consistent) for a specified
	* value. If it doesn't succeed, it tries to set it to a fall-back value
	*
	* Return: 0 on success, non-zero for failure.
	*/
	static int hl_pci_set_dma_mask(struct hl_device *hdev)
	{
	struct pci_dev *pdev = hdev->pdev;
	int rc;

	/* set DMA mask */
	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(hdev->dma_mask));
	if (rc) {
	dev_err(hdev->dev,
	"Failed to set pci dma mask to %d bits, error %d\n",
	hdev->dma_mask, rc);
	return rc;
	}

	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(hdev->dma_mask));
	if (rc) {
	dev_err(hdev->dev,
	"Failed to set pci consistent dma mask to %d bits, error %d\n",
	hdev->dma_mask, rc);
	return rc;
	}

	return 0;
	}

	/**
	* hl_pci_init() - PCI initialization code.
	* @hdev: Pointer to hl_device structure.
	*
	* Set DMA masks, initialize the PCI controller and map the PCI BARs.
	*
	* Return: 0 on success, non-zero for failure.
	*/
	int hl_pci_init(struct hl_device *hdev)
	{
	struct pci_dev *pdev = hdev->pdev;
	int rc;

	if (hdev->reset_pcilink)
	hl_pci_reset_link_through_bridge(hdev);

	rc = pci_enable_device_mem(pdev);
	if (rc) {
	dev_err(hdev->dev, "can't enable PCI device\n");
	return rc;
	}

	pci_set_master(pdev);

	rc = hdev->asic_funcs->pci_bars_map(hdev);
	if (rc) {
	dev_err(hdev->dev, "Failed to initialize PCI BARs\n");
	goto disable_device;
	}

	rc = hdev->asic_funcs->init_iatu(hdev);
	if (rc) {
	dev_err(hdev->dev, "Failed to initialize iATU\n");
	goto unmap_pci_bars;
	}

	rc = hl_pci_set_dma_mask(hdev);
	if (rc)
	goto unmap_pci_bars;

	return 0;

	unmap_pci_bars:
	hl_pci_bars_unmap(hdev);
	disable_device:
	pci_clear_master(pdev);
	pci_disable_device(pdev);

	return rc;
	}

	/**
	* hl_fw_fini() - PCI finalization code.
	* @hdev: Pointer to hl_device structure
	*
	* Unmap PCI bars and disable PCI device.
	*/
	void hl_pci_fini(struct hl_device *hdev)
	{
	hl_pci_bars_unmap(hdev);

	pci_clear_master(hdev->pdev);
	pci_disable_device(hdev->pdev);
	}