| // SPDX-License-Identifier: GPL-2.0 |
| // ISHTP interface for ChromeOS Embedded Controller |
| // |
| // Copyright (c) 2019, Intel Corporation. |
| // |
| // ISHTP client driver for talking to the Chrome OS EC firmware running |
| // on Intel Integrated Sensor Hub (ISH) using the ISH Transport protocol |
| // (ISH-TP). |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/platform_data/cros_ec_commands.h> |
| #include <linux/platform_data/cros_ec_proto.h> |
| #include <linux/intel-ish-client-if.h> |
| |
| #include "cros_ec.h" |
| |
| /* |
| * ISH TX/RX ring buffer pool size |
| * |
| * The AP->ISH messages and corresponding ISH->AP responses are |
| * serialized. We need 1 TX and 1 RX buffer for these. |
| * |
| * The MKBP ISH->AP events are serialized. We need one additional RX |
| * buffer for them. |
| */ |
| #define CROS_ISH_CL_TX_RING_SIZE 8 |
| #define CROS_ISH_CL_RX_RING_SIZE 8 |
| |
| /* ISH CrOS EC Host Commands */ |
| enum cros_ec_ish_channel { |
| CROS_EC_COMMAND = 1, /* AP->ISH message */ |
| CROS_MKBP_EVENT = 2, /* ISH->AP events */ |
| }; |
| |
| /* |
| * ISH firmware timeout for 1 message send failure is 1Hz, and the |
| * firmware will retry 2 times, so 3Hz is used for timeout. |
| */ |
| #define ISHTP_SEND_TIMEOUT (3 * HZ) |
| |
| /* ISH Transport CrOS EC ISH client unique GUID */ |
| static const guid_t cros_ish_guid = |
| GUID_INIT(0x7b7154d0, 0x56f4, 0x4bdc, |
| 0xb0, 0xd8, 0x9e, 0x7c, 0xda, 0xe0, 0xd6, 0xa0); |
| |
| struct header { |
| u8 channel; |
| u8 status; |
| u8 token; |
| u8 reserved; |
| } __packed; |
| |
| struct cros_ish_out_msg { |
| struct header hdr; |
| struct ec_host_request ec_request; |
| } __packed; |
| |
| struct cros_ish_in_msg { |
| struct header hdr; |
| struct ec_host_response ec_response; |
| } __packed; |
| |
| #define IN_MSG_EC_RESPONSE_PREAMBLE \ |
| offsetof(struct cros_ish_in_msg, ec_response) |
| |
| #define OUT_MSG_EC_REQUEST_PREAMBLE \ |
| offsetof(struct cros_ish_out_msg, ec_request) |
| |
| #define cl_data_to_dev(client_data) ishtp_device((client_data)->cl_device) |
| |
| /* |
| * The Read-Write Semaphore is used to prevent message TX or RX while |
| * the ishtp client is being initialized or undergoing reset. |
| * |
| * The readers are the kernel function calls responsible for IA->ISH |
| * and ISH->AP messaging. |
| * |
| * The writers are .reset() and .probe() function. |
| */ |
| static DECLARE_RWSEM(init_lock); |
| |
| /** |
| * struct response_info - Encapsulate firmware response related |
| * information for passing between function ish_send() and |
| * process_recv() callback. |
| * |
| * @data: Copy the data received from firmware here. |
| * @max_size: Max size allocated for the @data buffer. If the received |
| * data exceeds this value, we log an error. |
| * @size: Actual size of data received from firmware. |
| * @error: 0 for success, negative error code for a failure in process_recv(). |
| * @token: Expected token for response that we are waiting on. |
| * @received: Set to true on receiving a valid firmware response to host command |
| * @wait_queue: Wait queue for host to wait for firmware response. |
| */ |
| struct response_info { |
| void *data; |
| size_t max_size; |
| size_t size; |
| int error; |
| u8 token; |
| bool received; |
| wait_queue_head_t wait_queue; |
| }; |
| |
| /** |
| * struct ishtp_cl_data - Encapsulate per ISH TP Client. |
| * |
| * @cros_ish_cl: ISHTP firmware client instance. |
| * @cl_device: ISHTP client device instance. |
| * @response: Response info passing between ish_send() and process_recv(). |
| * @work_ishtp_reset: Work queue reset handling. |
| * @work_ec_evt: Work queue for EC events. |
| * @ec_dev: CrOS EC MFD device. |
| * |
| * This structure is used to store per client data. |
| */ |
| struct ishtp_cl_data { |
| struct ishtp_cl *cros_ish_cl; |
| struct ishtp_cl_device *cl_device; |
| |
| /* |
| * Used for passing firmware response information between |
| * ish_send() and process_recv() callback. |
| */ |
| struct response_info response; |
| |
| struct work_struct work_ishtp_reset; |
| struct work_struct work_ec_evt; |
| struct cros_ec_device *ec_dev; |
| }; |
| |
| /** |
| * ish_evt_handler - ISH to AP event handler |
| * @work: Work struct |
| */ |
| static void ish_evt_handler(struct work_struct *work) |
| { |
| struct ishtp_cl_data *client_data = |
| container_of(work, struct ishtp_cl_data, work_ec_evt); |
| struct cros_ec_device *ec_dev = client_data->ec_dev; |
| bool ec_has_more_events; |
| |
| do { |
| ec_has_more_events = cros_ec_handle_event(ec_dev); |
| } while (ec_has_more_events); |
| } |
| |
| /** |
| * ish_send() - Send message from host to firmware |
| * |
| * @client_data: Client data instance |
| * @out_msg: Message buffer to be sent to firmware |
| * @out_size: Size of out going message |
| * @in_msg: Message buffer where the incoming data is copied. This buffer |
| * is allocated by calling |
| * @in_size: Max size of incoming message |
| * |
| * Return: Number of bytes copied in the in_msg on success, negative |
| * error code on failure. |
| */ |
| static int ish_send(struct ishtp_cl_data *client_data, |
| u8 *out_msg, size_t out_size, |
| u8 *in_msg, size_t in_size) |
| { |
| static u8 next_token; |
| int rv; |
| struct header *out_hdr = (struct header *)out_msg; |
| struct ishtp_cl *cros_ish_cl = client_data->cros_ish_cl; |
| |
| dev_dbg(cl_data_to_dev(client_data), |
| "%s: channel=%02u status=%02u\n", |
| __func__, out_hdr->channel, out_hdr->status); |
| |
| /* Setup for incoming response */ |
| client_data->response.data = in_msg; |
| client_data->response.max_size = in_size; |
| client_data->response.error = 0; |
| client_data->response.token = next_token++; |
| client_data->response.received = false; |
| |
| out_hdr->token = client_data->response.token; |
| |
| rv = ishtp_cl_send(cros_ish_cl, out_msg, out_size); |
| if (rv) { |
| dev_err(cl_data_to_dev(client_data), |
| "ishtp_cl_send error %d\n", rv); |
| return rv; |
| } |
| |
| wait_event_interruptible_timeout(client_data->response.wait_queue, |
| client_data->response.received, |
| ISHTP_SEND_TIMEOUT); |
| if (!client_data->response.received) { |
| dev_err(cl_data_to_dev(client_data), |
| "Timed out for response to host message\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (client_data->response.error < 0) |
| return client_data->response.error; |
| |
| return client_data->response.size; |
| } |
| |
| /** |
| * process_recv() - Received and parse incoming packet |
| * @cros_ish_cl: Client instance to get stats |
| * @rb_in_proc: Host interface message buffer |
| * @timestamp: Timestamp of when parent callback started |
| * |
| * Parse the incoming packet. If it is a response packet then it will |
| * update per instance flags and wake up the caller waiting to for the |
| * response. If it is an event packet then it will schedule event work. |
| */ |
| static void process_recv(struct ishtp_cl *cros_ish_cl, |
| struct ishtp_cl_rb *rb_in_proc, ktime_t timestamp) |
| { |
| size_t data_len = rb_in_proc->buf_idx; |
| struct ishtp_cl_data *client_data = |
| ishtp_get_client_data(cros_ish_cl); |
| struct device *dev = cl_data_to_dev(client_data); |
| struct cros_ish_in_msg *in_msg = |
| (struct cros_ish_in_msg *)rb_in_proc->buffer.data; |
| |
| /* Proceed only if reset or init is not in progress */ |
| if (!down_read_trylock(&init_lock)) { |
| /* Free the buffer */ |
| ishtp_cl_io_rb_recycle(rb_in_proc); |
| dev_warn(dev, |
| "Host is not ready to receive incoming messages\n"); |
| return; |
| } |
| |
| /* |
| * All firmware messages contain a header. Check the buffer size |
| * before accessing elements inside. |
| */ |
| if (!rb_in_proc->buffer.data) { |
| dev_warn(dev, "rb_in_proc->buffer.data returned null"); |
| client_data->response.error = -EBADMSG; |
| goto end_error; |
| } |
| |
| if (data_len < sizeof(struct header)) { |
| dev_err(dev, "data size %zu is less than header %zu\n", |
| data_len, sizeof(struct header)); |
| client_data->response.error = -EMSGSIZE; |
| goto end_error; |
| } |
| |
| dev_dbg(dev, "channel=%02u status=%02u\n", |
| in_msg->hdr.channel, in_msg->hdr.status); |
| |
| switch (in_msg->hdr.channel) { |
| case CROS_EC_COMMAND: |
| if (client_data->response.received) { |
| dev_err(dev, |
| "Previous firmware message not yet processed\n"); |
| goto end_error; |
| } |
| |
| if (client_data->response.token != in_msg->hdr.token) { |
| dev_err_ratelimited(dev, |
| "Dropping old response token %d\n", |
| in_msg->hdr.token); |
| goto end_error; |
| } |
| |
| /* Sanity check */ |
| if (!client_data->response.data) { |
| dev_err(dev, |
| "Receiving buffer is null. Should be allocated by calling function\n"); |
| client_data->response.error = -EINVAL; |
| goto error_wake_up; |
| } |
| |
| if (data_len > client_data->response.max_size) { |
| dev_err(dev, |
| "Received buffer size %zu is larger than allocated buffer %zu\n", |
| data_len, client_data->response.max_size); |
| client_data->response.error = -EMSGSIZE; |
| goto error_wake_up; |
| } |
| |
| if (in_msg->hdr.status) { |
| dev_err(dev, "firmware returned status %d\n", |
| in_msg->hdr.status); |
| client_data->response.error = -EIO; |
| goto error_wake_up; |
| } |
| |
| /* Update the actual received buffer size */ |
| client_data->response.size = data_len; |
| |
| /* |
| * Copy the buffer received in firmware response for the |
| * calling thread. |
| */ |
| memcpy(client_data->response.data, |
| rb_in_proc->buffer.data, data_len); |
| |
| error_wake_up: |
| /* Free the buffer since we copied data or didn't need it */ |
| ishtp_cl_io_rb_recycle(rb_in_proc); |
| rb_in_proc = NULL; |
| |
| /* Set flag before waking up the caller */ |
| client_data->response.received = true; |
| |
| /* Wake the calling thread */ |
| wake_up_interruptible(&client_data->response.wait_queue); |
| |
| break; |
| |
| case CROS_MKBP_EVENT: |
| /* Free the buffer. This is just an event without data */ |
| ishtp_cl_io_rb_recycle(rb_in_proc); |
| rb_in_proc = NULL; |
| /* |
| * Set timestamp from beginning of function since we actually |
| * got an incoming MKBP event |
| */ |
| client_data->ec_dev->last_event_time = timestamp; |
| schedule_work(&client_data->work_ec_evt); |
| |
| break; |
| |
| default: |
| dev_err(dev, "Invalid channel=%02d\n", in_msg->hdr.channel); |
| } |
| |
| end_error: |
| /* Free the buffer if we already haven't */ |
| if (rb_in_proc) |
| ishtp_cl_io_rb_recycle(rb_in_proc); |
| |
| up_read(&init_lock); |
| } |
| |
| /** |
| * ish_event_cb() - bus driver callback for incoming message |
| * @cl_device: ISHTP client device for which this message is targeted. |
| * |
| * Remove the packet from the list and process the message by calling |
| * process_recv. |
| */ |
| static void ish_event_cb(struct ishtp_cl_device *cl_device) |
| { |
| struct ishtp_cl_rb *rb_in_proc; |
| struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); |
| ktime_t timestamp; |
| |
| /* |
| * Take timestamp as close to hardware interrupt as possible for sensor |
| * timestamps. |
| */ |
| timestamp = cros_ec_get_time_ns(); |
| |
| while ((rb_in_proc = ishtp_cl_rx_get_rb(cros_ish_cl)) != NULL) { |
| /* Decide what to do with received data */ |
| process_recv(cros_ish_cl, rb_in_proc, timestamp); |
| } |
| } |
| |
| /** |
| * cros_ish_init() - Init function for ISHTP client |
| * @cros_ish_cl: ISHTP client instance |
| * |
| * This function complete the initializtion of the client. |
| * |
| * Return: 0 for success, negative error code for failure. |
| */ |
| static int cros_ish_init(struct ishtp_cl *cros_ish_cl) |
| { |
| int rv; |
| struct ishtp_device *dev; |
| struct ishtp_fw_client *fw_client; |
| struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); |
| |
| rv = ishtp_cl_link(cros_ish_cl); |
| if (rv) { |
| dev_err(cl_data_to_dev(client_data), |
| "ishtp_cl_link failed\n"); |
| return rv; |
| } |
| |
| dev = ishtp_get_ishtp_device(cros_ish_cl); |
| |
| /* Connect to firmware client */ |
| ishtp_set_tx_ring_size(cros_ish_cl, CROS_ISH_CL_TX_RING_SIZE); |
| ishtp_set_rx_ring_size(cros_ish_cl, CROS_ISH_CL_RX_RING_SIZE); |
| |
| fw_client = ishtp_fw_cl_get_client(dev, &cros_ish_guid); |
| if (!fw_client) { |
| dev_err(cl_data_to_dev(client_data), |
| "ish client uuid not found\n"); |
| rv = -ENOENT; |
| goto err_cl_unlink; |
| } |
| |
| ishtp_cl_set_fw_client_id(cros_ish_cl, |
| ishtp_get_fw_client_id(fw_client)); |
| ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_CONNECTING); |
| |
| rv = ishtp_cl_connect(cros_ish_cl); |
| if (rv) { |
| dev_err(cl_data_to_dev(client_data), |
| "client connect fail\n"); |
| goto err_cl_unlink; |
| } |
| |
| ishtp_register_event_cb(client_data->cl_device, ish_event_cb); |
| return 0; |
| |
| err_cl_unlink: |
| ishtp_cl_unlink(cros_ish_cl); |
| return rv; |
| } |
| |
| /** |
| * cros_ish_deinit() - Deinit function for ISHTP client |
| * @cros_ish_cl: ISHTP client instance |
| * |
| * Unlink and free cros_ec client |
| */ |
| static void cros_ish_deinit(struct ishtp_cl *cros_ish_cl) |
| { |
| ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING); |
| ishtp_cl_disconnect(cros_ish_cl); |
| ishtp_cl_unlink(cros_ish_cl); |
| ishtp_cl_flush_queues(cros_ish_cl); |
| |
| /* Disband and free all Tx and Rx client-level rings */ |
| ishtp_cl_free(cros_ish_cl); |
| } |
| |
| /** |
| * prepare_cros_ec_rx() - Check & prepare receive buffer |
| * @ec_dev: CrOS EC MFD device. |
| * @in_msg: Incoming message buffer |
| * @msg: cros_ec command used to send & receive data |
| * |
| * Return: 0 for success, negative error code for failure. |
| * |
| * Check the received buffer. Convert to cros_ec_command format. |
| */ |
| static int prepare_cros_ec_rx(struct cros_ec_device *ec_dev, |
| const struct cros_ish_in_msg *in_msg, |
| struct cros_ec_command *msg) |
| { |
| u8 sum = 0; |
| int i, rv, offset; |
| |
| /* Check response error code */ |
| msg->result = in_msg->ec_response.result; |
| rv = cros_ec_check_result(ec_dev, msg); |
| if (rv < 0) |
| return rv; |
| |
| if (in_msg->ec_response.data_len > msg->insize) { |
| dev_err(ec_dev->dev, "Packet too long (%d bytes, expected %d)", |
| in_msg->ec_response.data_len, msg->insize); |
| return -ENOSPC; |
| } |
| |
| /* Copy response packet payload and compute checksum */ |
| for (i = 0; i < sizeof(struct ec_host_response); i++) |
| sum += ((u8 *)in_msg)[IN_MSG_EC_RESPONSE_PREAMBLE + i]; |
| |
| offset = sizeof(struct cros_ish_in_msg); |
| for (i = 0; i < in_msg->ec_response.data_len; i++) |
| sum += msg->data[i] = ((u8 *)in_msg)[offset + i]; |
| |
| if (sum) { |
| dev_dbg(ec_dev->dev, "Bad received packet checksum %d\n", sum); |
| return -EBADMSG; |
| } |
| |
| return 0; |
| } |
| |
| static int cros_ec_pkt_xfer_ish(struct cros_ec_device *ec_dev, |
| struct cros_ec_command *msg) |
| { |
| int rv; |
| struct ishtp_cl *cros_ish_cl = ec_dev->priv; |
| struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); |
| struct device *dev = cl_data_to_dev(client_data); |
| struct cros_ish_in_msg *in_msg = (struct cros_ish_in_msg *)ec_dev->din; |
| struct cros_ish_out_msg *out_msg = |
| (struct cros_ish_out_msg *)ec_dev->dout; |
| size_t in_size = sizeof(struct cros_ish_in_msg) + msg->insize; |
| size_t out_size = sizeof(struct cros_ish_out_msg) + msg->outsize; |
| |
| /* Sanity checks */ |
| if (in_size > ec_dev->din_size) { |
| dev_err(dev, |
| "Incoming payload size %zu is too large for ec_dev->din_size %d\n", |
| in_size, ec_dev->din_size); |
| return -EMSGSIZE; |
| } |
| |
| if (out_size > ec_dev->dout_size) { |
| dev_err(dev, |
| "Outgoing payload size %zu is too large for ec_dev->dout_size %d\n", |
| out_size, ec_dev->dout_size); |
| return -EMSGSIZE; |
| } |
| |
| /* Proceed only if reset-init is not in progress */ |
| if (!down_read_trylock(&init_lock)) { |
| dev_warn(dev, |
| "Host is not ready to send messages to ISH. Try again\n"); |
| return -EAGAIN; |
| } |
| |
| /* Prepare the package to be sent over ISH TP */ |
| out_msg->hdr.channel = CROS_EC_COMMAND; |
| out_msg->hdr.status = 0; |
| |
| ec_dev->dout += OUT_MSG_EC_REQUEST_PREAMBLE; |
| cros_ec_prepare_tx(ec_dev, msg); |
| ec_dev->dout -= OUT_MSG_EC_REQUEST_PREAMBLE; |
| |
| dev_dbg(dev, |
| "out_msg: struct_ver=0x%x checksum=0x%x command=0x%x command_ver=0x%x data_len=0x%x\n", |
| out_msg->ec_request.struct_version, |
| out_msg->ec_request.checksum, |
| out_msg->ec_request.command, |
| out_msg->ec_request.command_version, |
| out_msg->ec_request.data_len); |
| |
| /* Send command to ISH EC firmware and read response */ |
| rv = ish_send(client_data, |
| (u8 *)out_msg, out_size, |
| (u8 *)in_msg, in_size); |
| if (rv < 0) |
| goto end_error; |
| |
| rv = prepare_cros_ec_rx(ec_dev, in_msg, msg); |
| if (rv) |
| goto end_error; |
| |
| rv = in_msg->ec_response.data_len; |
| |
| dev_dbg(dev, |
| "in_msg: struct_ver=0x%x checksum=0x%x result=0x%x data_len=0x%x\n", |
| in_msg->ec_response.struct_version, |
| in_msg->ec_response.checksum, |
| in_msg->ec_response.result, |
| in_msg->ec_response.data_len); |
| |
| end_error: |
| if (msg->command == EC_CMD_REBOOT_EC) |
| msleep(EC_REBOOT_DELAY_MS); |
| |
| up_read(&init_lock); |
| |
| return rv; |
| } |
| |
| static int cros_ec_dev_init(struct ishtp_cl_data *client_data) |
| { |
| struct cros_ec_device *ec_dev; |
| struct device *dev = cl_data_to_dev(client_data); |
| |
| ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL); |
| if (!ec_dev) |
| return -ENOMEM; |
| |
| client_data->ec_dev = ec_dev; |
| dev->driver_data = ec_dev; |
| |
| ec_dev->dev = dev; |
| ec_dev->priv = client_data->cros_ish_cl; |
| ec_dev->cmd_xfer = NULL; |
| ec_dev->pkt_xfer = cros_ec_pkt_xfer_ish; |
| ec_dev->phys_name = dev_name(dev); |
| ec_dev->din_size = sizeof(struct cros_ish_in_msg) + |
| sizeof(struct ec_response_get_protocol_info); |
| ec_dev->dout_size = sizeof(struct cros_ish_out_msg); |
| |
| return cros_ec_register(ec_dev); |
| } |
| |
| static void reset_handler(struct work_struct *work) |
| { |
| int rv; |
| struct device *dev; |
| struct ishtp_cl *cros_ish_cl; |
| struct ishtp_cl_device *cl_device; |
| struct ishtp_cl_data *client_data = |
| container_of(work, struct ishtp_cl_data, work_ishtp_reset); |
| |
| /* Lock for reset to complete */ |
| down_write(&init_lock); |
| |
| cros_ish_cl = client_data->cros_ish_cl; |
| cl_device = client_data->cl_device; |
| |
| /* Unlink, flush queues & start again */ |
| ishtp_cl_unlink(cros_ish_cl); |
| ishtp_cl_flush_queues(cros_ish_cl); |
| ishtp_cl_free(cros_ish_cl); |
| |
| cros_ish_cl = ishtp_cl_allocate(cl_device); |
| if (!cros_ish_cl) { |
| up_write(&init_lock); |
| return; |
| } |
| |
| ishtp_set_drvdata(cl_device, cros_ish_cl); |
| ishtp_set_client_data(cros_ish_cl, client_data); |
| client_data->cros_ish_cl = cros_ish_cl; |
| |
| rv = cros_ish_init(cros_ish_cl); |
| if (rv) { |
| ishtp_cl_free(cros_ish_cl); |
| dev_err(cl_data_to_dev(client_data), "Reset Failed\n"); |
| up_write(&init_lock); |
| return; |
| } |
| |
| /* Refresh ec_dev device pointers */ |
| client_data->ec_dev->priv = client_data->cros_ish_cl; |
| dev = cl_data_to_dev(client_data); |
| dev->driver_data = client_data->ec_dev; |
| |
| dev_info(cl_data_to_dev(client_data), "Chrome EC ISH reset done\n"); |
| |
| up_write(&init_lock); |
| } |
| |
| /** |
| * cros_ec_ishtp_probe() - ISHTP client driver probe callback |
| * @cl_device: ISHTP client device instance |
| * |
| * Return: 0 for success, negative error code for failure. |
| */ |
| static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device) |
| { |
| int rv; |
| struct ishtp_cl *cros_ish_cl; |
| struct ishtp_cl_data *client_data = |
| devm_kzalloc(ishtp_device(cl_device), |
| sizeof(*client_data), GFP_KERNEL); |
| if (!client_data) |
| return -ENOMEM; |
| |
| /* Lock for initialization to complete */ |
| down_write(&init_lock); |
| |
| cros_ish_cl = ishtp_cl_allocate(cl_device); |
| if (!cros_ish_cl) { |
| rv = -ENOMEM; |
| goto end_ishtp_cl_alloc_error; |
| } |
| |
| ishtp_set_drvdata(cl_device, cros_ish_cl); |
| ishtp_set_client_data(cros_ish_cl, client_data); |
| client_data->cros_ish_cl = cros_ish_cl; |
| client_data->cl_device = cl_device; |
| |
| init_waitqueue_head(&client_data->response.wait_queue); |
| |
| INIT_WORK(&client_data->work_ishtp_reset, |
| reset_handler); |
| INIT_WORK(&client_data->work_ec_evt, |
| ish_evt_handler); |
| |
| rv = cros_ish_init(cros_ish_cl); |
| if (rv) |
| goto end_ishtp_cl_init_error; |
| |
| ishtp_get_device(cl_device); |
| |
| up_write(&init_lock); |
| |
| /* Register croc_ec_dev mfd */ |
| rv = cros_ec_dev_init(client_data); |
| if (rv) { |
| down_write(&init_lock); |
| goto end_cros_ec_dev_init_error; |
| } |
| |
| return 0; |
| |
| end_cros_ec_dev_init_error: |
| ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING); |
| ishtp_cl_disconnect(cros_ish_cl); |
| ishtp_cl_unlink(cros_ish_cl); |
| ishtp_cl_flush_queues(cros_ish_cl); |
| ishtp_put_device(cl_device); |
| end_ishtp_cl_init_error: |
| ishtp_cl_free(cros_ish_cl); |
| end_ishtp_cl_alloc_error: |
| up_write(&init_lock); |
| return rv; |
| } |
| |
| /** |
| * cros_ec_ishtp_remove() - ISHTP client driver remove callback |
| * @cl_device: ISHTP client device instance |
| * |
| * Return: 0 |
| */ |
| static int cros_ec_ishtp_remove(struct ishtp_cl_device *cl_device) |
| { |
| struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); |
| struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); |
| |
| cancel_work_sync(&client_data->work_ishtp_reset); |
| cancel_work_sync(&client_data->work_ec_evt); |
| cros_ish_deinit(cros_ish_cl); |
| ishtp_put_device(cl_device); |
| |
| return 0; |
| } |
| |
| /** |
| * cros_ec_ishtp_reset() - ISHTP client driver reset callback |
| * @cl_device: ISHTP client device instance |
| * |
| * Return: 0 |
| */ |
| static int cros_ec_ishtp_reset(struct ishtp_cl_device *cl_device) |
| { |
| struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); |
| struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); |
| |
| schedule_work(&client_data->work_ishtp_reset); |
| |
| return 0; |
| } |
| |
| /** |
| * cros_ec_ishtp_suspend() - ISHTP client driver suspend callback |
| * @device: device instance |
| * |
| * Return: 0 for success, negative error code for failure. |
| */ |
| static int __maybe_unused cros_ec_ishtp_suspend(struct device *device) |
| { |
| struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device); |
| struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); |
| struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); |
| |
| return cros_ec_suspend(client_data->ec_dev); |
| } |
| |
| /** |
| * cros_ec_ishtp_resume() - ISHTP client driver resume callback |
| * @device: device instance |
| * |
| * Return: 0 for success, negative error code for failure. |
| */ |
| static int __maybe_unused cros_ec_ishtp_resume(struct device *device) |
| { |
| struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device); |
| struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); |
| struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); |
| |
| return cros_ec_resume(client_data->ec_dev); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(cros_ec_ishtp_pm_ops, cros_ec_ishtp_suspend, |
| cros_ec_ishtp_resume); |
| |
| static struct ishtp_cl_driver cros_ec_ishtp_driver = { |
| .name = "cros_ec_ishtp", |
| .guid = &cros_ish_guid, |
| .probe = cros_ec_ishtp_probe, |
| .remove = cros_ec_ishtp_remove, |
| .reset = cros_ec_ishtp_reset, |
| .driver = { |
| .pm = &cros_ec_ishtp_pm_ops, |
| }, |
| }; |
| |
| static int __init cros_ec_ishtp_mod_init(void) |
| { |
| return ishtp_cl_driver_register(&cros_ec_ishtp_driver, THIS_MODULE); |
| } |
| |
| static void __exit cros_ec_ishtp_mod_exit(void) |
| { |
| ishtp_cl_driver_unregister(&cros_ec_ishtp_driver); |
| } |
| |
| module_init(cros_ec_ishtp_mod_init); |
| module_exit(cros_ec_ishtp_mod_exit); |
| |
| MODULE_DESCRIPTION("ChromeOS EC ISHTP Client Driver"); |
| MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@intel.com>"); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("ishtp:*"); |