| What: /sys/devices/platform/firmware\:zynqmp-firmware/ggs* |
| Date: March 2020 |
| KernelVersion: 5.6 |
| Contact: "Jolly Shah" <jollys@xilinx.com> |
| Description: |
| Read/Write PMU global general storage register value, |
| GLOBAL_GEN_STORAGE{0:3}. |
| Global general storage register that can be used |
| by system to pass information between masters. |
| |
| The register is reset during system or power-on |
| resets. Three registers are used by the FSBL and |
| other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}. |
| |
| Usage:: |
| |
| # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 |
| # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 |
| |
| Example:: |
| |
| # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 |
| # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 |
| |
| Users: Xilinx |
| |
| What: /sys/devices/platform/firmware\:zynqmp-firmware/pggs* |
| Date: March 2020 |
| KernelVersion: 5.6 |
| Contact: "Jolly Shah" <jollys@xilinx.com> |
| Description: |
| Read/Write PMU persistent global general storage register |
| value, PERS_GLOB_GEN_STORAGE{0:3}. |
| Persistent global general storage register that |
| can be used by system to pass information between |
| masters. |
| |
| This register is only reset by the power-on reset |
| and maintains its value through a system reset. |
| Four registers are used by the FSBL and other Xilinx |
| software products: PERS_GLOB_GEN_STORAGE{4:7}. |
| Register is reset only by a POR reset. |
| |
| Usage:: |
| |
| # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 |
| # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 |
| |
| Example:: |
| |
| # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 |
| # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 |
| |
| Users: Xilinx |
| |
| What: /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope |
| Date: March 2020 |
| KernelVersion: 5.6 |
| Contact: "Jolly Shah" <jollys@xilinx.com> |
| Description: |
| This sysfs interface allows to set the shutdown scope for the |
| next shutdown request. When the next shutdown is performed, the |
| platform specific portion of PSCI-system_off can use the chosen |
| shutdown scope. |
| |
| Following are available shutdown scopes(subtypes): |
| |
| subsystem: |
| Only the APU along with all of its peripherals |
| not used by other processing units will be |
| shut down. This may result in the FPD power |
| domain being shut down provided that no other |
| processing unit uses FPD peripherals or DRAM. |
| ps_only: |
| The complete PS will be shut down, including the |
| RPU, PMU, etc. Only the PL domain (FPGA) |
| remains untouched. |
| system: |
| The complete system/device is shut down. |
| |
| Usage:: |
| |
| # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope |
| # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope |
| |
| Example:: |
| |
| # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope |
| # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope |
| |
| Users: Xilinx |
| |
| What: /sys/devices/platform/firmware\:zynqmp-firmware/health_status |
| Date: March 2020 |
| KernelVersion: 5.6 |
| Contact: "Jolly Shah" <jollys@xilinx.com> |
| Description: |
| This sysfs interface allows to set the health status. If PMUFW |
| is compiled with CHECK_HEALTHY_BOOT, it will check the healthy |
| bit on FPD WDT expiration. If healthy bit is set by a user |
| application running in Linux, PMUFW will do APU only restart. If |
| healthy bit is not set during FPD WDT expiration, PMUFW will do |
| system restart. |
| |
| Usage: |
| |
| Set healthy bit:: |
| |
| # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status |
| |
| Unset healthy bit:: |
| |
| # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status |
| |
| Users: Xilinx |
