| // SPDX-License-Identifier: GPL-2.0-only |
| // Copyright (C) 2019, Michael Srba |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| struct s6e88a0_ams452ef01 { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| struct regulator_bulk_data supplies[2]; |
| struct gpio_desc *reset_gpio; |
| |
| bool prepared; |
| }; |
| |
| static inline struct |
| s6e88a0_ams452ef01 *to_s6e88a0_ams452ef01(struct drm_panel *panel) |
| { |
| return container_of(panel, struct s6e88a0_ams452ef01, panel); |
| } |
| |
| #define dsi_dcs_write_seq(dsi, seq...) do { \ |
| static const u8 d[] = { seq }; \ |
| int ret; \ |
| ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ |
| if (ret < 0) \ |
| return ret; \ |
| } while (0) |
| |
| static void s6e88a0_ams452ef01_reset(struct s6e88a0_ams452ef01 *ctx) |
| { |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| usleep_range(5000, 6000); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| usleep_range(1000, 2000); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| usleep_range(10000, 11000); |
| } |
| |
| static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); // enable LEVEL2 commands |
| dsi_dcs_write_seq(dsi, 0xcc, 0x4c); // set Pixel Clock Divider polarity |
| |
| ret = mipi_dsi_dcs_exit_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to exit sleep mode: %d\n", ret); |
| return ret; |
| } |
| msleep(120); |
| |
| // set default brightness/gama |
| dsi_dcs_write_seq(dsi, 0xca, |
| 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, // V255 RR,GG,BB |
| 0x80, 0x80, 0x80, // V203 R,G,B |
| 0x80, 0x80, 0x80, // V151 R,G,B |
| 0x80, 0x80, 0x80, // V87 R,G,B |
| 0x80, 0x80, 0x80, // V51 R,G,B |
| 0x80, 0x80, 0x80, // V35 R,G,B |
| 0x80, 0x80, 0x80, // V23 R,G,B |
| 0x80, 0x80, 0x80, // V11 R,G,B |
| 0x6b, 0x68, 0x71, // V3 R,G,B |
| 0x00, 0x00, 0x00); // V1 R,G,B |
| // set default Amoled Off Ratio |
| dsi_dcs_write_seq(dsi, 0xb2, 0x40, 0x0a, 0x17, 0x00, 0x0a); |
| dsi_dcs_write_seq(dsi, 0xb6, 0x2c, 0x0b); // set default elvss voltage |
| dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00); |
| dsi_dcs_write_seq(dsi, 0xf7, 0x03); // gamma/aor update |
| dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); // disable LEVEL2 commands |
| |
| ret = mipi_dsi_dcs_set_display_on(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set display on: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int s6e88a0_ams452ef01_off(struct s6e88a0_ams452ef01 *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_off(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set display off: %d\n", ret); |
| return ret; |
| } |
| msleep(35); |
| |
| ret = mipi_dsi_dcs_enter_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enter sleep mode: %d\n", ret); |
| return ret; |
| } |
| msleep(120); |
| |
| return 0; |
| } |
| |
| static int s6e88a0_ams452ef01_prepare(struct drm_panel *panel) |
| { |
| struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel); |
| struct device *dev = &ctx->dsi->dev; |
| int ret; |
| |
| if (ctx->prepared) |
| return 0; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enable regulators: %d\n", ret); |
| return ret; |
| } |
| |
| s6e88a0_ams452ef01_reset(ctx); |
| |
| ret = s6e88a0_ams452ef01_on(ctx); |
| if (ret < 0) { |
| dev_err(dev, "Failed to initialize panel: %d\n", ret); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), |
| ctx->supplies); |
| return ret; |
| } |
| |
| ctx->prepared = true; |
| return 0; |
| } |
| |
| static int s6e88a0_ams452ef01_unprepare(struct drm_panel *panel) |
| { |
| struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel); |
| struct device *dev = &ctx->dsi->dev; |
| int ret; |
| |
| if (!ctx->prepared) |
| return 0; |
| |
| ret = s6e88a0_ams452ef01_off(ctx); |
| if (ret < 0) |
| dev_err(dev, "Failed to un-initialize panel: %d\n", ret); |
| |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| |
| ctx->prepared = false; |
| return 0; |
| } |
| |
| static const struct drm_display_mode s6e88a0_ams452ef01_mode = { |
| .clock = (540 + 88 + 4 + 20) * (960 + 14 + 2 + 8) * 60 / 1000, |
| .hdisplay = 540, |
| .hsync_start = 540 + 88, |
| .hsync_end = 540 + 88 + 4, |
| .htotal = 540 + 88 + 4 + 20, |
| .vdisplay = 960, |
| .vsync_start = 960 + 14, |
| .vsync_end = 960 + 14 + 2, |
| .vtotal = 960 + 14 + 2 + 8, |
| .width_mm = 56, |
| .height_mm = 100, |
| }; |
| |
| static int s6e88a0_ams452ef01_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &s6e88a0_ams452ef01_mode); |
| if (!mode) |
| return -ENOMEM; |
| |
| drm_mode_set_name(mode); |
| |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; |
| connector->display_info.width_mm = mode->width_mm; |
| connector->display_info.height_mm = mode->height_mm; |
| drm_mode_probed_add(connector, mode); |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs s6e88a0_ams452ef01_panel_funcs = { |
| .unprepare = s6e88a0_ams452ef01_unprepare, |
| .prepare = s6e88a0_ams452ef01_prepare, |
| .get_modes = s6e88a0_ams452ef01_get_modes, |
| }; |
| |
| static int s6e88a0_ams452ef01_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct s6e88a0_ams452ef01 *ctx; |
| int ret; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->supplies[0].supply = "vdd3"; |
| ctx->supplies[1].supply = "vci"; |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), |
| ctx->supplies); |
| if (ret < 0) { |
| dev_err(dev, "Failed to get regulators: %d\n", ret); |
| return ret; |
| } |
| |
| ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(ctx->reset_gpio)) { |
| ret = PTR_ERR(ctx->reset_gpio); |
| dev_err(dev, "Failed to get reset-gpios: %d\n", ret); |
| return ret; |
| } |
| |
| ctx->dsi = dsi; |
| mipi_dsi_set_drvdata(dsi, ctx); |
| |
| dsi->lanes = 2; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST; |
| |
| drm_panel_init(&ctx->panel, dev, &s6e88a0_ams452ef01_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| |
| drm_panel_add(&ctx->panel); |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to attach to DSI host: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int s6e88a0_ams452ef01_remove(struct mipi_dsi_device *dsi) |
| { |
| struct s6e88a0_ams452ef01 *ctx = mipi_dsi_get_drvdata(dsi); |
| int ret; |
| |
| ret = mipi_dsi_detach(dsi); |
| if (ret < 0) |
| dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); |
| |
| drm_panel_remove(&ctx->panel); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id s6e88a0_ams452ef01_of_match[] = { |
| { .compatible = "samsung,s6e88a0-ams452ef01" }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, s6e88a0_ams452ef01_of_match); |
| |
| static struct mipi_dsi_driver s6e88a0_ams452ef01_driver = { |
| .probe = s6e88a0_ams452ef01_probe, |
| .remove = s6e88a0_ams452ef01_remove, |
| .driver = { |
| .name = "panel-s6e88a0-ams452ef01", |
| .of_match_table = s6e88a0_ams452ef01_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(s6e88a0_ams452ef01_driver); |
| |
| MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>"); |
| MODULE_DESCRIPTION("MIPI-DSI based Panel Driver for AMS452EF01 AMOLED LCD with a S6E88A0 controller"); |
| MODULE_LICENSE("GPL v2"); |