| /* |
| * BYD TouchPad PS/2 mouse driver |
| * |
| * Copyright (C) 2015 Chris Diamand <chris@diamand.org> |
| * Copyright (C) 2015 Richard Pospesel |
| * Copyright (C) 2015 Tai Chi Minh Ralph Eastwood |
| * Copyright (C) 2015 Martin Wimpress |
| * Copyright (C) 2015 Jay Kuri |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/libps2.h> |
| #include <linux/serio.h> |
| #include <linux/slab.h> |
| |
| #include "psmouse.h" |
| #include "byd.h" |
| |
| /* PS2 Bits */ |
| #define PS2_Y_OVERFLOW BIT_MASK(7) |
| #define PS2_X_OVERFLOW BIT_MASK(6) |
| #define PS2_Y_SIGN BIT_MASK(5) |
| #define PS2_X_SIGN BIT_MASK(4) |
| #define PS2_ALWAYS_1 BIT_MASK(3) |
| #define PS2_MIDDLE BIT_MASK(2) |
| #define PS2_RIGHT BIT_MASK(1) |
| #define PS2_LEFT BIT_MASK(0) |
| |
| /* |
| * BYD pad constants |
| */ |
| |
| /* |
| * True device resolution is unknown, however experiments show the |
| * resolution is about 111 units/mm. |
| * Absolute coordinate packets are in the range 0-255 for both X and Y |
| * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in |
| * the right ballpark given the touchpad's physical dimensions and estimate |
| * resolution per spec sheet, device active area dimensions are |
| * 101.6 x 60.1 mm. |
| */ |
| #define BYD_PAD_WIDTH 11264 |
| #define BYD_PAD_HEIGHT 6656 |
| #define BYD_PAD_RESOLUTION 111 |
| |
| /* |
| * Given the above dimensions, relative packets velocity is in multiples of |
| * 1 unit / 11 milliseconds. We use this dt to estimate distance traveled |
| */ |
| #define BYD_DT 11 |
| /* Time in jiffies used to timeout various touch events (64 ms) */ |
| #define BYD_TOUCH_TIMEOUT msecs_to_jiffies(64) |
| |
| /* BYD commands reverse engineered from windows driver */ |
| |
| /* |
| * Swipe gesture from off-pad to on-pad |
| * 0 : disable |
| * 1 : enable |
| */ |
| #define BYD_CMD_SET_OFFSCREEN_SWIPE 0x10cc |
| /* |
| * Tap and drag delay time |
| * 0 : disable |
| * 1 - 8 : least to most delay |
| */ |
| #define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0x10cf |
| /* |
| * Physical buttons function mapping |
| * 0 : enable |
| * 4 : normal |
| * 5 : left button custom command |
| * 6 : right button custom command |
| * 8 : disable |
| */ |
| #define BYD_CMD_SET_PHYSICAL_BUTTONS 0x10d0 |
| /* |
| * Absolute mode (1 byte X/Y resolution) |
| * 0 : disable |
| * 2 : enable |
| */ |
| #define BYD_CMD_SET_ABSOLUTE_MODE 0x10d1 |
| /* |
| * Two finger scrolling |
| * 1 : vertical |
| * 2 : horizontal |
| * 3 : vertical + horizontal |
| * 4 : disable |
| */ |
| #define BYD_CMD_SET_TWO_FINGER_SCROLL 0x10d2 |
| /* |
| * Handedness |
| * 1 : right handed |
| * 2 : left handed |
| */ |
| #define BYD_CMD_SET_HANDEDNESS 0x10d3 |
| /* |
| * Tap to click |
| * 1 : enable |
| * 2 : disable |
| */ |
| #define BYD_CMD_SET_TAP 0x10d4 |
| /* |
| * Tap and drag |
| * 1 : tap and hold to drag |
| * 2 : tap and hold to drag + lock |
| * 3 : disable |
| */ |
| #define BYD_CMD_SET_TAP_DRAG 0x10d5 |
| /* |
| * Touch sensitivity |
| * 1 - 7 : least to most sensitive |
| */ |
| #define BYD_CMD_SET_TOUCH_SENSITIVITY 0x10d6 |
| /* |
| * One finger scrolling |
| * 1 : vertical |
| * 2 : horizontal |
| * 3 : vertical + horizontal |
| * 4 : disable |
| */ |
| #define BYD_CMD_SET_ONE_FINGER_SCROLL 0x10d7 |
| /* |
| * One finger scrolling function |
| * 1 : free scrolling |
| * 2 : edge motion |
| * 3 : free scrolling + edge motion |
| * 4 : disable |
| */ |
| #define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0x10d8 |
| /* |
| * Sliding speed |
| * 1 - 5 : slowest to fastest |
| */ |
| #define BYD_CMD_SET_SLIDING_SPEED 0x10da |
| /* |
| * Edge motion |
| * 1 : disable |
| * 2 : enable when dragging |
| * 3 : enable when dragging and pointing |
| */ |
| #define BYD_CMD_SET_EDGE_MOTION 0x10db |
| /* |
| * Left edge region size |
| * 0 - 7 : smallest to largest width |
| */ |
| #define BYD_CMD_SET_LEFT_EDGE_REGION 0x10dc |
| /* |
| * Top edge region size |
| * 0 - 9 : smallest to largest height |
| */ |
| #define BYD_CMD_SET_TOP_EDGE_REGION 0x10dd |
| /* |
| * Disregard palm press as clicks |
| * 1 - 6 : smallest to largest |
| */ |
| #define BYD_CMD_SET_PALM_CHECK 0x10de |
| /* |
| * Right edge region size |
| * 0 - 7 : smallest to largest width |
| */ |
| #define BYD_CMD_SET_RIGHT_EDGE_REGION 0x10df |
| /* |
| * Bottom edge region size |
| * 0 - 9 : smallest to largest height |
| */ |
| #define BYD_CMD_SET_BOTTOM_EDGE_REGION 0x10e1 |
| /* |
| * Multitouch gestures |
| * 1 : enable |
| * 2 : disable |
| */ |
| #define BYD_CMD_SET_MULTITOUCH 0x10e3 |
| /* |
| * Edge motion speed |
| * 0 : control with finger pressure |
| * 1 - 9 : slowest to fastest |
| */ |
| #define BYD_CMD_SET_EDGE_MOTION_SPEED 0x10e4 |
| /* |
| * Two finger scolling function |
| * 0 : free scrolling |
| * 1 : free scrolling (with momentum) |
| * 2 : edge motion |
| * 3 : free scrolling (with momentum) + edge motion |
| * 4 : disable |
| */ |
| #define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0x10e5 |
| |
| /* |
| * The touchpad generates a mixture of absolute and relative packets, indicated |
| * by the the last byte of each packet being set to one of the following: |
| */ |
| #define BYD_PACKET_ABSOLUTE 0xf8 |
| #define BYD_PACKET_RELATIVE 0x00 |
| /* Multitouch gesture packets */ |
| #define BYD_PACKET_PINCH_IN 0xd8 |
| #define BYD_PACKET_PINCH_OUT 0x28 |
| #define BYD_PACKET_ROTATE_CLOCKWISE 0x29 |
| #define BYD_PACKET_ROTATE_ANTICLOCKWISE 0xd7 |
| #define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT 0x2a |
| #define BYD_PACKET_TWO_FINGER_SCROLL_DOWN 0x2b |
| #define BYD_PACKET_TWO_FINGER_SCROLL_UP 0xd5 |
| #define BYD_PACKET_TWO_FINGER_SCROLL_LEFT 0xd6 |
| #define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT 0x2c |
| #define BYD_PACKET_THREE_FINGER_SWIPE_DOWN 0x2d |
| #define BYD_PACKET_THREE_FINGER_SWIPE_UP 0xd3 |
| #define BYD_PACKET_THREE_FINGER_SWIPE_LEFT 0xd4 |
| #define BYD_PACKET_FOUR_FINGER_DOWN 0x33 |
| #define BYD_PACKET_FOUR_FINGER_UP 0xcd |
| #define BYD_PACKET_REGION_SCROLL_RIGHT 0x35 |
| #define BYD_PACKET_REGION_SCROLL_DOWN 0x36 |
| #define BYD_PACKET_REGION_SCROLL_UP 0xca |
| #define BYD_PACKET_REGION_SCROLL_LEFT 0xcb |
| #define BYD_PACKET_RIGHT_CORNER_CLICK 0xd2 |
| #define BYD_PACKET_LEFT_CORNER_CLICK 0x2e |
| #define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK 0x2f |
| #define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT 0x37 |
| #define BYD_PACKET_ONTO_PAD_SWIPE_DOWN 0x30 |
| #define BYD_PACKET_ONTO_PAD_SWIPE_UP 0xd0 |
| #define BYD_PACKET_ONTO_PAD_SWIPE_LEFT 0xc9 |
| |
| struct byd_data { |
| struct timer_list timer; |
| s32 abs_x; |
| s32 abs_y; |
| typeof(jiffies) last_touch_time; |
| bool btn_left; |
| bool btn_right; |
| bool touch; |
| }; |
| |
| static void byd_report_input(struct psmouse *psmouse) |
| { |
| struct byd_data *priv = psmouse->private; |
| struct input_dev *dev = psmouse->dev; |
| |
| input_report_key(dev, BTN_TOUCH, priv->touch); |
| input_report_key(dev, BTN_TOOL_FINGER, priv->touch); |
| |
| input_report_abs(dev, ABS_X, priv->abs_x); |
| input_report_abs(dev, ABS_Y, priv->abs_y); |
| input_report_key(dev, BTN_LEFT, priv->btn_left); |
| input_report_key(dev, BTN_RIGHT, priv->btn_right); |
| |
| input_sync(dev); |
| } |
| |
| static void byd_clear_touch(unsigned long data) |
| { |
| struct psmouse *psmouse = (struct psmouse *)data; |
| struct byd_data *priv = psmouse->private; |
| |
| serio_pause_rx(psmouse->ps2dev.serio); |
| priv->touch = false; |
| |
| byd_report_input(psmouse); |
| |
| serio_continue_rx(psmouse->ps2dev.serio); |
| |
| /* |
| * Move cursor back to center of pad when we lose touch - this |
| * specifically improves user experience when moving cursor with one |
| * finger, and pressing a button with another. |
| */ |
| priv->abs_x = BYD_PAD_WIDTH / 2; |
| priv->abs_y = BYD_PAD_HEIGHT / 2; |
| } |
| |
| static psmouse_ret_t byd_process_byte(struct psmouse *psmouse) |
| { |
| struct byd_data *priv = psmouse->private; |
| u8 *pkt = psmouse->packet; |
| |
| if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) { |
| psmouse_warn(psmouse, "Always_1 bit not 1. pkt[0] = %02x\n", |
| pkt[0]); |
| return PSMOUSE_BAD_DATA; |
| } |
| |
| if (psmouse->pktcnt < psmouse->pktsize) |
| return PSMOUSE_GOOD_DATA; |
| |
| /* Otherwise, a full packet has been received */ |
| switch (pkt[3]) { |
| case BYD_PACKET_ABSOLUTE: |
| /* Only use absolute packets for the start of movement. */ |
| if (!priv->touch) { |
| /* needed to detect tap */ |
| typeof(jiffies) tap_time = |
| priv->last_touch_time + BYD_TOUCH_TIMEOUT; |
| priv->touch = time_after(jiffies, tap_time); |
| |
| /* init abs position */ |
| priv->abs_x = pkt[1] * (BYD_PAD_WIDTH / 256); |
| priv->abs_y = (255 - pkt[2]) * (BYD_PAD_HEIGHT / 256); |
| } |
| break; |
| case BYD_PACKET_RELATIVE: { |
| /* Standard packet */ |
| /* Sign-extend if a sign bit is set. */ |
| u32 signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0; |
| u32 signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0; |
| s32 dx = signx | (int) pkt[1]; |
| s32 dy = signy | (int) pkt[2]; |
| |
| /* Update position based on velocity */ |
| priv->abs_x += dx * BYD_DT; |
| priv->abs_y -= dy * BYD_DT; |
| |
| priv->touch = true; |
| break; |
| } |
| default: |
| psmouse_warn(psmouse, |
| "Unrecognized Z: pkt = %02x %02x %02x %02x\n", |
| psmouse->packet[0], psmouse->packet[1], |
| psmouse->packet[2], psmouse->packet[3]); |
| return PSMOUSE_BAD_DATA; |
| } |
| |
| priv->btn_left = pkt[0] & PS2_LEFT; |
| priv->btn_right = pkt[0] & PS2_RIGHT; |
| |
| byd_report_input(psmouse); |
| |
| /* Reset time since last touch. */ |
| if (priv->touch) { |
| priv->last_touch_time = jiffies; |
| mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT); |
| } |
| |
| return PSMOUSE_FULL_PACKET; |
| } |
| |
| static int byd_reset_touchpad(struct psmouse *psmouse) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| u8 param[4]; |
| size_t i; |
| |
| const struct { |
| u16 command; |
| u8 arg; |
| } seq[] = { |
| /* |
| * Intellimouse initialization sequence, to get 4-byte instead |
| * of 3-byte packets. |
| */ |
| { PSMOUSE_CMD_SETRATE, 0xC8 }, |
| { PSMOUSE_CMD_SETRATE, 0x64 }, |
| { PSMOUSE_CMD_SETRATE, 0x50 }, |
| { PSMOUSE_CMD_GETID, 0 }, |
| { PSMOUSE_CMD_ENABLE, 0 }, |
| /* |
| * BYD-specific initialization, which enables absolute mode and |
| * (if desired), the touchpad's built-in gesture detection. |
| */ |
| { 0x10E2, 0x00 }, |
| { 0x10E0, 0x02 }, |
| /* The touchpad should reply with 4 seemingly-random bytes */ |
| { 0x14E0, 0x01 }, |
| /* Pairs of parameters and values. */ |
| { BYD_CMD_SET_HANDEDNESS, 0x01 }, |
| { BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04 }, |
| { BYD_CMD_SET_TAP, 0x02 }, |
| { BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04 }, |
| { BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04 }, |
| { BYD_CMD_SET_EDGE_MOTION, 0x01 }, |
| { BYD_CMD_SET_PALM_CHECK, 0x00 }, |
| { BYD_CMD_SET_MULTITOUCH, 0x02 }, |
| { BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04 }, |
| { BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04 }, |
| { BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 }, |
| { BYD_CMD_SET_TOP_EDGE_REGION, 0x00 }, |
| { BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 }, |
| { BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 }, |
| { BYD_CMD_SET_ABSOLUTE_MODE, 0x02 }, |
| /* Finalize initialization. */ |
| { 0x10E0, 0x00 }, |
| { 0x10E2, 0x01 }, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(seq); ++i) { |
| memset(param, 0, sizeof(param)); |
| param[0] = seq[i].arg; |
| if (ps2_command(ps2dev, param, seq[i].command)) |
| return -EIO; |
| } |
| |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); |
| return 0; |
| } |
| |
| static int byd_reconnect(struct psmouse *psmouse) |
| { |
| int retry = 0, error = 0; |
| |
| psmouse_dbg(psmouse, "Reconnect\n"); |
| do { |
| psmouse_reset(psmouse); |
| if (retry) |
| ssleep(1); |
| error = byd_detect(psmouse, 0); |
| } while (error && ++retry < 3); |
| |
| if (error) |
| return error; |
| |
| psmouse_dbg(psmouse, "Reconnected after %d attempts\n", retry); |
| |
| error = byd_reset_touchpad(psmouse); |
| if (error) { |
| psmouse_err(psmouse, "Unable to initialize device\n"); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static void byd_disconnect(struct psmouse *psmouse) |
| { |
| struct byd_data *priv = psmouse->private; |
| |
| if (priv) { |
| del_timer(&priv->timer); |
| kfree(psmouse->private); |
| psmouse->private = NULL; |
| } |
| } |
| |
| int byd_detect(struct psmouse *psmouse, bool set_properties) |
| { |
| struct ps2dev *ps2dev = &psmouse->ps2dev; |
| u8 param[4] = {0x03, 0x00, 0x00, 0x00}; |
| |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) |
| return -1; |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) |
| return -1; |
| |
| if (param[1] != 0x03 || param[2] != 0x64) |
| return -ENODEV; |
| |
| psmouse_dbg(psmouse, "BYD touchpad detected\n"); |
| |
| if (set_properties) { |
| psmouse->vendor = "BYD"; |
| psmouse->name = "TouchPad"; |
| } |
| |
| return 0; |
| } |
| |
| int byd_init(struct psmouse *psmouse) |
| { |
| struct input_dev *dev = psmouse->dev; |
| struct byd_data *priv; |
| |
| if (psmouse_reset(psmouse)) |
| return -EIO; |
| |
| if (byd_reset_touchpad(psmouse)) |
| return -EIO; |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| memset(priv, 0, sizeof(*priv)); |
| setup_timer(&priv->timer, byd_clear_touch, (unsigned long) psmouse); |
| |
| psmouse->private = priv; |
| psmouse->disconnect = byd_disconnect; |
| psmouse->reconnect = byd_reconnect; |
| psmouse->protocol_handler = byd_process_byte; |
| psmouse->pktsize = 4; |
| psmouse->resync_time = 0; |
| |
| __set_bit(INPUT_PROP_POINTER, dev->propbit); |
| /* Touchpad */ |
| __set_bit(BTN_TOUCH, dev->keybit); |
| __set_bit(BTN_TOOL_FINGER, dev->keybit); |
| /* Buttons */ |
| __set_bit(BTN_LEFT, dev->keybit); |
| __set_bit(BTN_RIGHT, dev->keybit); |
| __clear_bit(BTN_MIDDLE, dev->keybit); |
| |
| /* Absolute position */ |
| __set_bit(EV_ABS, dev->evbit); |
| input_set_abs_params(dev, ABS_X, 0, BYD_PAD_WIDTH, 0, 0); |
| input_set_abs_params(dev, ABS_Y, 0, BYD_PAD_HEIGHT, 0, 0); |
| input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION); |
| input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION); |
| /* No relative support */ |
| __clear_bit(EV_REL, dev->evbit); |
| __clear_bit(REL_X, dev->relbit); |
| __clear_bit(REL_Y, dev->relbit); |
| |
| return 0; |
| } |