| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * (C) COPYRIGHT 2018 ARM Limited. All rights reserved. |
| * Author: James.Qian.Wang <james.qian.wang@arm.com> |
| * |
| */ |
| #include <linux/component.h> |
| #include <linux/interrupt.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_irq.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_vblank.h> |
| |
| #include "komeda_dev.h" |
| #include "komeda_framebuffer.h" |
| #include "komeda_kms.h" |
| |
| DEFINE_DRM_GEM_CMA_FOPS(komeda_cma_fops); |
| |
| static int komeda_gem_cma_dumb_create(struct drm_file *file, |
| struct drm_device *dev, |
| struct drm_mode_create_dumb *args) |
| { |
| struct komeda_dev *mdev = dev->dev_private; |
| u32 pitch = DIV_ROUND_UP(args->width * args->bpp, 8); |
| |
| args->pitch = ALIGN(pitch, mdev->chip.bus_width); |
| |
| return drm_gem_cma_dumb_create_internal(file, dev, args); |
| } |
| |
| static irqreturn_t komeda_kms_irq_handler(int irq, void *data) |
| { |
| struct drm_device *drm = data; |
| struct komeda_dev *mdev = drm->dev_private; |
| struct komeda_kms_dev *kms = to_kdev(drm); |
| struct komeda_events evts; |
| irqreturn_t status; |
| u32 i; |
| |
| /* Call into the CHIP to recognize events */ |
| memset(&evts, 0, sizeof(evts)); |
| status = mdev->funcs->irq_handler(mdev, &evts); |
| |
| komeda_print_events(&evts); |
| |
| /* Notify the crtc to handle the events */ |
| for (i = 0; i < kms->n_crtcs; i++) |
| komeda_crtc_handle_event(&kms->crtcs[i], &evts); |
| |
| return status; |
| } |
| |
| static struct drm_driver komeda_kms_driver = { |
| .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, |
| .lastclose = drm_fb_helper_lastclose, |
| .gem_free_object_unlocked = drm_gem_cma_free_object, |
| .gem_vm_ops = &drm_gem_cma_vm_ops, |
| .dumb_create = komeda_gem_cma_dumb_create, |
| .prime_handle_to_fd = drm_gem_prime_handle_to_fd, |
| .prime_fd_to_handle = drm_gem_prime_fd_to_handle, |
| .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, |
| .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, |
| .gem_prime_vmap = drm_gem_cma_prime_vmap, |
| .gem_prime_vunmap = drm_gem_cma_prime_vunmap, |
| .gem_prime_mmap = drm_gem_cma_prime_mmap, |
| .fops = &komeda_cma_fops, |
| .name = "komeda", |
| .desc = "Arm Komeda Display Processor driver", |
| .date = "20181101", |
| .major = 0, |
| .minor = 1, |
| }; |
| |
| static void komeda_kms_commit_tail(struct drm_atomic_state *old_state) |
| { |
| struct drm_device *dev = old_state->dev; |
| |
| drm_atomic_helper_commit_modeset_disables(dev, old_state); |
| |
| drm_atomic_helper_commit_planes(dev, old_state, |
| DRM_PLANE_COMMIT_ACTIVE_ONLY); |
| |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); |
| |
| drm_atomic_helper_wait_for_flip_done(dev, old_state); |
| |
| drm_atomic_helper_commit_hw_done(old_state); |
| |
| drm_atomic_helper_cleanup_planes(dev, old_state); |
| } |
| |
| static const struct drm_mode_config_helper_funcs komeda_mode_config_helpers = { |
| .atomic_commit_tail = komeda_kms_commit_tail, |
| }; |
| |
| static int komeda_plane_state_list_add(struct drm_plane_state *plane_st, |
| struct list_head *zorder_list) |
| { |
| struct komeda_plane_state *new = to_kplane_st(plane_st); |
| struct komeda_plane_state *node, *last; |
| |
| last = list_empty(zorder_list) ? |
| NULL : list_last_entry(zorder_list, typeof(*last), zlist_node); |
| |
| /* Considering the list sequence is zpos increasing, so if list is empty |
| * or the zpos of new node bigger than the last node in list, no need |
| * loop and just insert the new one to the tail of the list. |
| */ |
| if (!last || (new->base.zpos > last->base.zpos)) { |
| list_add_tail(&new->zlist_node, zorder_list); |
| return 0; |
| } |
| |
| /* Build the list by zpos increasing */ |
| list_for_each_entry(node, zorder_list, zlist_node) { |
| if (new->base.zpos < node->base.zpos) { |
| list_add_tail(&new->zlist_node, &node->zlist_node); |
| break; |
| } else if (node->base.zpos == new->base.zpos) { |
| struct drm_plane *a = node->base.plane; |
| struct drm_plane *b = new->base.plane; |
| |
| /* Komeda doesn't support setting a same zpos for |
| * different planes. |
| */ |
| DRM_DEBUG_ATOMIC("PLANE: %s and PLANE: %s are configured same zpos: %d.\n", |
| a->name, b->name, node->base.zpos); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int komeda_crtc_normalize_zpos(struct drm_crtc *crtc, |
| struct drm_crtc_state *crtc_st) |
| { |
| struct drm_atomic_state *state = crtc_st->state; |
| struct komeda_crtc *kcrtc = to_kcrtc(crtc); |
| struct komeda_crtc_state *kcrtc_st = to_kcrtc_st(crtc_st); |
| struct komeda_plane_state *kplane_st; |
| struct drm_plane_state *plane_st; |
| struct drm_plane *plane; |
| struct list_head zorder_list; |
| int order = 0, err; |
| |
| DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n", |
| crtc->base.id, crtc->name); |
| |
| INIT_LIST_HEAD(&zorder_list); |
| |
| /* This loop also added all effected planes into the new state */ |
| drm_for_each_plane_mask(plane, crtc->dev, crtc_st->plane_mask) { |
| plane_st = drm_atomic_get_plane_state(state, plane); |
| if (IS_ERR(plane_st)) |
| return PTR_ERR(plane_st); |
| |
| /* Build a list by zpos increasing */ |
| err = komeda_plane_state_list_add(plane_st, &zorder_list); |
| if (err) |
| return err; |
| } |
| |
| kcrtc_st->max_slave_zorder = 0; |
| |
| list_for_each_entry(kplane_st, &zorder_list, zlist_node) { |
| plane_st = &kplane_st->base; |
| plane = plane_st->plane; |
| |
| plane_st->normalized_zpos = order++; |
| /* When layer_split has been enabled, one plane will be handled |
| * by two separated komeda layers (left/right), which may needs |
| * two zorders. |
| * - zorder: for left_layer for left display part. |
| * - zorder + 1: will be reserved for right layer. |
| */ |
| if (to_kplane_st(plane_st)->layer_split) |
| order++; |
| |
| DRM_DEBUG_ATOMIC("[PLANE:%d:%s] zpos:%d, normalized zpos: %d\n", |
| plane->base.id, plane->name, |
| plane_st->zpos, plane_st->normalized_zpos); |
| |
| /* calculate max slave zorder */ |
| if (has_bit(drm_plane_index(plane), kcrtc->slave_planes)) |
| kcrtc_st->max_slave_zorder = |
| max(plane_st->normalized_zpos, |
| kcrtc_st->max_slave_zorder); |
| } |
| |
| crtc_st->zpos_changed = true; |
| |
| return 0; |
| } |
| |
| static int komeda_kms_check(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *new_crtc_st; |
| int i, err; |
| |
| err = drm_atomic_helper_check_modeset(dev, state); |
| if (err) |
| return err; |
| |
| /* Komeda need to re-calculate resource assumption in every commit |
| * so need to add all affected_planes (even unchanged) to |
| * drm_atomic_state. |
| */ |
| for_each_new_crtc_in_state(state, crtc, new_crtc_st, i) { |
| err = drm_atomic_add_affected_planes(state, crtc); |
| if (err) |
| return err; |
| |
| err = komeda_crtc_normalize_zpos(crtc, new_crtc_st); |
| if (err) |
| return err; |
| } |
| |
| err = drm_atomic_helper_check_planes(dev, state); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static const struct drm_mode_config_funcs komeda_mode_config_funcs = { |
| .fb_create = komeda_fb_create, |
| .atomic_check = komeda_kms_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| static void komeda_kms_mode_config_init(struct komeda_kms_dev *kms, |
| struct komeda_dev *mdev) |
| { |
| struct drm_mode_config *config = &kms->base.mode_config; |
| |
| drm_mode_config_init(&kms->base); |
| |
| komeda_kms_setup_crtcs(kms, mdev); |
| |
| /* Get value from dev */ |
| config->min_width = 0; |
| config->min_height = 0; |
| config->max_width = 4096; |
| config->max_height = 4096; |
| config->allow_fb_modifiers = true; |
| |
| config->funcs = &komeda_mode_config_funcs; |
| config->helper_private = &komeda_mode_config_helpers; |
| } |
| |
| struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev) |
| { |
| struct komeda_kms_dev *kms = kzalloc(sizeof(*kms), GFP_KERNEL); |
| struct drm_device *drm; |
| int err; |
| |
| if (!kms) |
| return ERR_PTR(-ENOMEM); |
| |
| drm = &kms->base; |
| err = drm_dev_init(drm, &komeda_kms_driver, mdev->dev); |
| if (err) |
| goto free_kms; |
| |
| drm->dev_private = mdev; |
| |
| komeda_kms_mode_config_init(kms, mdev); |
| |
| err = komeda_kms_add_private_objs(kms, mdev); |
| if (err) |
| goto cleanup_mode_config; |
| |
| err = komeda_kms_add_planes(kms, mdev); |
| if (err) |
| goto cleanup_mode_config; |
| |
| err = drm_vblank_init(drm, kms->n_crtcs); |
| if (err) |
| goto cleanup_mode_config; |
| |
| err = komeda_kms_add_crtcs(kms, mdev); |
| if (err) |
| goto cleanup_mode_config; |
| |
| err = komeda_kms_add_wb_connectors(kms, mdev); |
| if (err) |
| goto cleanup_mode_config; |
| |
| err = component_bind_all(mdev->dev, kms); |
| if (err) |
| goto cleanup_mode_config; |
| |
| drm_mode_config_reset(drm); |
| |
| err = devm_request_irq(drm->dev, mdev->irq, |
| komeda_kms_irq_handler, IRQF_SHARED, |
| drm->driver->name, drm); |
| if (err) |
| goto free_component_binding; |
| |
| err = mdev->funcs->enable_irq(mdev); |
| if (err) |
| goto free_component_binding; |
| |
| drm->irq_enabled = true; |
| |
| drm_kms_helper_poll_init(drm); |
| |
| err = drm_dev_register(drm, 0); |
| if (err) |
| goto free_interrupts; |
| |
| return kms; |
| |
| free_interrupts: |
| drm_kms_helper_poll_fini(drm); |
| drm->irq_enabled = false; |
| mdev->funcs->disable_irq(mdev); |
| free_component_binding: |
| component_unbind_all(mdev->dev, drm); |
| cleanup_mode_config: |
| drm_mode_config_cleanup(drm); |
| komeda_kms_cleanup_private_objs(kms); |
| drm->dev_private = NULL; |
| drm_dev_put(drm); |
| free_kms: |
| kfree(kms); |
| return ERR_PTR(err); |
| } |
| |
| void komeda_kms_detach(struct komeda_kms_dev *kms) |
| { |
| struct drm_device *drm = &kms->base; |
| struct komeda_dev *mdev = drm->dev_private; |
| |
| drm_dev_unregister(drm); |
| drm_kms_helper_poll_fini(drm); |
| drm_atomic_helper_shutdown(drm); |
| drm->irq_enabled = false; |
| mdev->funcs->disable_irq(mdev); |
| component_unbind_all(mdev->dev, drm); |
| drm_mode_config_cleanup(drm); |
| komeda_kms_cleanup_private_objs(kms); |
| drm->dev_private = NULL; |
| drm_dev_put(drm); |
| } |