| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Support for NI general purpose counters |
| * |
| * Copyright (C) 2006 Frank Mori Hess <fmhess@users.sourceforge.net> |
| */ |
| |
| /* |
| * Module: ni_tio |
| * Description: National Instruments general purpose counters |
| * Author: J.P. Mellor <jpmellor@rose-hulman.edu>, |
| * Herman.Bruyninckx@mech.kuleuven.ac.be, |
| * Wim.Meeussen@mech.kuleuven.ac.be, |
| * Klaas.Gadeyne@mech.kuleuven.ac.be, |
| * Frank Mori Hess <fmhess@users.sourceforge.net> |
| * Updated: Thu Nov 16 09:50:32 EST 2006 |
| * Status: works |
| * |
| * This module is not used directly by end-users. Rather, it |
| * is used by other drivers (for example ni_660x and ni_pcimio) |
| * to provide support for NI's general purpose counters. It was |
| * originally based on the counter code from ni_660x.c and |
| * ni_mio_common.c. |
| * |
| * References: |
| * DAQ 660x Register-Level Programmer Manual (NI 370505A-01) |
| * DAQ 6601/6602 User Manual (NI 322137B-01) |
| * 340934b.pdf DAQ-STC reference manual |
| * |
| * TODO: Support use of both banks X and Y |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include "ni_tio_internal.h" |
| |
| /* |
| * clock sources for ni e and m series boards, |
| * get bits with GI_SRC_SEL() |
| */ |
| #define NI_M_TIMEBASE_1_CLK 0x0 /* 20MHz */ |
| #define NI_M_PFI_CLK(x) (((x) < 10) ? (1 + (x)) : (0xb + (x))) |
| #define NI_M_RTSI_CLK(x) (((x) == 7) ? 0x1b : (0xb + (x))) |
| #define NI_M_TIMEBASE_2_CLK 0x12 /* 100KHz */ |
| #define NI_M_NEXT_TC_CLK 0x13 |
| #define NI_M_NEXT_GATE_CLK 0x14 /* Gi_Src_SubSelect=0 */ |
| #define NI_M_PXI_STAR_TRIGGER_CLK 0x14 /* Gi_Src_SubSelect=1 */ |
| #define NI_M_PXI10_CLK 0x1d |
| #define NI_M_TIMEBASE_3_CLK 0x1e /* 80MHz, Gi_Src_SubSelect=0 */ |
| #define NI_M_ANALOG_TRIGGER_OUT_CLK 0x1e /* Gi_Src_SubSelect=1 */ |
| #define NI_M_LOGIC_LOW_CLK 0x1f |
| #define NI_M_MAX_PFI_CHAN 15 |
| #define NI_M_MAX_RTSI_CHAN 7 |
| |
| /* |
| * clock sources for ni_660x boards, |
| * get bits with GI_SRC_SEL() |
| */ |
| #define NI_660X_TIMEBASE_1_CLK 0x0 /* 20MHz */ |
| #define NI_660X_SRC_PIN_I_CLK 0x1 |
| #define NI_660X_SRC_PIN_CLK(x) (0x2 + (x)) |
| #define NI_660X_NEXT_GATE_CLK 0xa |
| #define NI_660X_RTSI_CLK(x) (0xb + (x)) |
| #define NI_660X_TIMEBASE_2_CLK 0x12 /* 100KHz */ |
| #define NI_660X_NEXT_TC_CLK 0x13 |
| #define NI_660X_TIMEBASE_3_CLK 0x1e /* 80MHz */ |
| #define NI_660X_LOGIC_LOW_CLK 0x1f |
| #define NI_660X_MAX_SRC_PIN 7 |
| #define NI_660X_MAX_RTSI_CHAN 6 |
| |
| /* ni m series gate_select */ |
| #define NI_M_TIMESTAMP_MUX_GATE_SEL 0x0 |
| #define NI_M_PFI_GATE_SEL(x) (((x) < 10) ? (1 + (x)) : (0xb + (x))) |
| #define NI_M_RTSI_GATE_SEL(x) (((x) == 7) ? 0x1b : (0xb + (x))) |
| #define NI_M_AI_START2_GATE_SEL 0x12 |
| #define NI_M_PXI_STAR_TRIGGER_GATE_SEL 0x13 |
| #define NI_M_NEXT_OUT_GATE_SEL 0x14 |
| #define NI_M_AI_START1_GATE_SEL 0x1c |
| #define NI_M_NEXT_SRC_GATE_SEL 0x1d |
| #define NI_M_ANALOG_TRIG_OUT_GATE_SEL 0x1e |
| #define NI_M_LOGIC_LOW_GATE_SEL 0x1f |
| |
| /* ni_660x gate select */ |
| #define NI_660X_SRC_PIN_I_GATE_SEL 0x0 |
| #define NI_660X_GATE_PIN_I_GATE_SEL 0x1 |
| #define NI_660X_PIN_GATE_SEL(x) (0x2 + (x)) |
| #define NI_660X_NEXT_SRC_GATE_SEL 0xa |
| #define NI_660X_RTSI_GATE_SEL(x) (0xb + (x)) |
| #define NI_660X_NEXT_OUT_GATE_SEL 0x14 |
| #define NI_660X_LOGIC_LOW_GATE_SEL 0x1f |
| #define NI_660X_MAX_GATE_PIN 7 |
| |
| /* ni_660x second gate select */ |
| #define NI_660X_SRC_PIN_I_GATE2_SEL 0x0 |
| #define NI_660X_UD_PIN_I_GATE2_SEL 0x1 |
| #define NI_660X_UD_PIN_GATE2_SEL(x) (0x2 + (x)) |
| #define NI_660X_NEXT_SRC_GATE2_SEL 0xa |
| #define NI_660X_RTSI_GATE2_SEL(x) (0xb + (x)) |
| #define NI_660X_NEXT_OUT_GATE2_SEL 0x14 |
| #define NI_660X_SELECTED_GATE2_SEL 0x1e |
| #define NI_660X_LOGIC_LOW_GATE2_SEL 0x1f |
| #define NI_660X_MAX_UP_DOWN_PIN 7 |
| |
| static inline unsigned int GI_PRESCALE_X2(enum ni_gpct_variant variant) |
| { |
| switch (variant) { |
| case ni_gpct_variant_e_series: |
| default: |
| return 0; |
| case ni_gpct_variant_m_series: |
| return GI_M_PRESCALE_X2; |
| case ni_gpct_variant_660x: |
| return GI_660X_PRESCALE_X2; |
| } |
| } |
| |
| static inline unsigned int GI_PRESCALE_X8(enum ni_gpct_variant variant) |
| { |
| switch (variant) { |
| case ni_gpct_variant_e_series: |
| default: |
| return 0; |
| case ni_gpct_variant_m_series: |
| return GI_M_PRESCALE_X8; |
| case ni_gpct_variant_660x: |
| return GI_660X_PRESCALE_X8; |
| } |
| } |
| |
| static bool ni_tio_has_gate2_registers(const struct ni_gpct_device *counter_dev) |
| { |
| switch (counter_dev->variant) { |
| case ni_gpct_variant_e_series: |
| default: |
| return false; |
| case ni_gpct_variant_m_series: |
| case ni_gpct_variant_660x: |
| return true; |
| } |
| } |
| |
| /** |
| * ni_tio_write() - Write a TIO register using the driver provided callback. |
| * @counter: struct ni_gpct counter. |
| * @value: the value to write |
| * @reg: the register to write. |
| */ |
| void ni_tio_write(struct ni_gpct *counter, unsigned int value, |
| enum ni_gpct_register reg) |
| { |
| if (reg < NITIO_NUM_REGS) |
| counter->counter_dev->write(counter, value, reg); |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_write); |
| |
| /** |
| * ni_tio_read() - Read a TIO register using the driver provided callback. |
| * @counter: struct ni_gpct counter. |
| * @reg: the register to read. |
| */ |
| unsigned int ni_tio_read(struct ni_gpct *counter, enum ni_gpct_register reg) |
| { |
| if (reg < NITIO_NUM_REGS) |
| return counter->counter_dev->read(counter, reg); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_read); |
| |
| static void ni_tio_reset_count_and_disarm(struct ni_gpct *counter) |
| { |
| unsigned int cidx = counter->counter_index; |
| |
| ni_tio_write(counter, GI_RESET(cidx), NITIO_RESET_REG(cidx)); |
| } |
| |
| static int ni_tio_clock_period_ps(const struct ni_gpct *counter, |
| unsigned int generic_clock_source, |
| u64 *period_ps) |
| { |
| u64 clock_period_ps; |
| |
| switch (generic_clock_source & NI_GPCT_CLOCK_SRC_SELECT_MASK) { |
| case NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS: |
| clock_period_ps = 50000; |
| break; |
| case NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS: |
| clock_period_ps = 10000000; |
| break; |
| case NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS: |
| clock_period_ps = 12500; |
| break; |
| case NI_GPCT_PXI10_CLOCK_SRC_BITS: |
| clock_period_ps = 100000; |
| break; |
| default: |
| /* |
| * clock period is specified by user with prescaling |
| * already taken into account. |
| */ |
| *period_ps = counter->clock_period_ps; |
| return 0; |
| } |
| |
| switch (generic_clock_source & NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK) { |
| case NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS: |
| break; |
| case NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS: |
| clock_period_ps *= 2; |
| break; |
| case NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS: |
| clock_period_ps *= 8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| *period_ps = clock_period_ps; |
| return 0; |
| } |
| |
| static void ni_tio_set_bits_transient(struct ni_gpct *counter, |
| enum ni_gpct_register reg, |
| unsigned int mask, unsigned int value, |
| unsigned int transient) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int chip = counter->chip_index; |
| unsigned long flags; |
| |
| if (reg < NITIO_NUM_REGS && chip < counter_dev->num_chips) { |
| unsigned int *regs = counter_dev->regs[chip]; |
| |
| spin_lock_irqsave(&counter_dev->regs_lock, flags); |
| regs[reg] &= ~mask; |
| regs[reg] |= (value & mask); |
| ni_tio_write(counter, regs[reg] | transient, reg); |
| spin_unlock_irqrestore(&counter_dev->regs_lock, flags); |
| } |
| } |
| |
| /** |
| * ni_tio_set_bits() - Safely write a counter register. |
| * @counter: struct ni_gpct counter. |
| * @reg: the register to write. |
| * @mask: the bits to change. |
| * @value: the new bits value. |
| * |
| * Used to write to, and update the software copy, a register whose bits may |
| * be twiddled in interrupt context, or whose software copy may be read in |
| * interrupt context. |
| */ |
| void ni_tio_set_bits(struct ni_gpct *counter, enum ni_gpct_register reg, |
| unsigned int mask, unsigned int value) |
| { |
| ni_tio_set_bits_transient(counter, reg, mask, value, 0x0); |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_set_bits); |
| |
| /** |
| * ni_tio_get_soft_copy() - Safely read the software copy of a counter register. |
| * @counter: struct ni_gpct counter. |
| * @reg: the register to read. |
| * |
| * Used to get the software copy of a register whose bits might be modified |
| * in interrupt context, or whose software copy might need to be read in |
| * interrupt context. |
| */ |
| unsigned int ni_tio_get_soft_copy(const struct ni_gpct *counter, |
| enum ni_gpct_register reg) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int chip = counter->chip_index; |
| unsigned int value = 0; |
| unsigned long flags; |
| |
| if (reg < NITIO_NUM_REGS && chip < counter_dev->num_chips) { |
| spin_lock_irqsave(&counter_dev->regs_lock, flags); |
| value = counter_dev->regs[chip][reg]; |
| spin_unlock_irqrestore(&counter_dev->regs_lock, flags); |
| } |
| return value; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_get_soft_copy); |
| |
| static unsigned int ni_tio_clock_src_modifiers(const struct ni_gpct *counter) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int counting_mode_bits = |
| ni_tio_get_soft_copy(counter, NITIO_CNT_MODE_REG(cidx)); |
| unsigned int bits = 0; |
| |
| if (ni_tio_get_soft_copy(counter, NITIO_INPUT_SEL_REG(cidx)) & |
| GI_SRC_POL_INVERT) |
| bits |= NI_GPCT_INVERT_CLOCK_SRC_BIT; |
| if (counting_mode_bits & GI_PRESCALE_X2(counter_dev->variant)) |
| bits |= NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS; |
| if (counting_mode_bits & GI_PRESCALE_X8(counter_dev->variant)) |
| bits |= NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS; |
| return bits; |
| } |
| |
| static int ni_m_series_clock_src_select(const struct ni_gpct *counter, |
| unsigned int *clk_src) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int chip = counter->chip_index; |
| unsigned int second_gate_reg = NITIO_GATE2_REG(cidx); |
| unsigned int clock_source = 0; |
| unsigned int src; |
| unsigned int i; |
| |
| src = GI_BITS_TO_SRC(ni_tio_get_soft_copy(counter, |
| NITIO_INPUT_SEL_REG(cidx))); |
| |
| switch (src) { |
| case NI_M_TIMEBASE_1_CLK: |
| clock_source = NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS; |
| break; |
| case NI_M_TIMEBASE_2_CLK: |
| clock_source = NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS; |
| break; |
| case NI_M_TIMEBASE_3_CLK: |
| if (counter_dev->regs[chip][second_gate_reg] & GI_SRC_SUBSEL) |
| clock_source = |
| NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS; |
| else |
| clock_source = NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS; |
| break; |
| case NI_M_LOGIC_LOW_CLK: |
| clock_source = NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS; |
| break; |
| case NI_M_NEXT_GATE_CLK: |
| if (counter_dev->regs[chip][second_gate_reg] & GI_SRC_SUBSEL) |
| clock_source = NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS; |
| else |
| clock_source = NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS; |
| break; |
| case NI_M_PXI10_CLK: |
| clock_source = NI_GPCT_PXI10_CLOCK_SRC_BITS; |
| break; |
| case NI_M_NEXT_TC_CLK: |
| clock_source = NI_GPCT_NEXT_TC_CLOCK_SRC_BITS; |
| break; |
| default: |
| for (i = 0; i <= NI_M_MAX_RTSI_CHAN; ++i) { |
| if (src == NI_M_RTSI_CLK(i)) { |
| clock_source = NI_GPCT_RTSI_CLOCK_SRC_BITS(i); |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_M_MAX_PFI_CHAN; ++i) { |
| if (src == NI_M_PFI_CLK(i)) { |
| clock_source = NI_GPCT_PFI_CLOCK_SRC_BITS(i); |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_PFI_CHAN) |
| break; |
| return -EINVAL; |
| } |
| clock_source |= ni_tio_clock_src_modifiers(counter); |
| *clk_src = clock_source; |
| return 0; |
| } |
| |
| static int ni_660x_clock_src_select(const struct ni_gpct *counter, |
| unsigned int *clk_src) |
| { |
| unsigned int clock_source = 0; |
| unsigned int cidx = counter->counter_index; |
| unsigned int src; |
| unsigned int i; |
| |
| src = GI_BITS_TO_SRC(ni_tio_get_soft_copy(counter, |
| NITIO_INPUT_SEL_REG(cidx))); |
| |
| switch (src) { |
| case NI_660X_TIMEBASE_1_CLK: |
| clock_source = NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS; |
| break; |
| case NI_660X_TIMEBASE_2_CLK: |
| clock_source = NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS; |
| break; |
| case NI_660X_TIMEBASE_3_CLK: |
| clock_source = NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS; |
| break; |
| case NI_660X_LOGIC_LOW_CLK: |
| clock_source = NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS; |
| break; |
| case NI_660X_SRC_PIN_I_CLK: |
| clock_source = NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS; |
| break; |
| case NI_660X_NEXT_GATE_CLK: |
| clock_source = NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS; |
| break; |
| case NI_660X_NEXT_TC_CLK: |
| clock_source = NI_GPCT_NEXT_TC_CLOCK_SRC_BITS; |
| break; |
| default: |
| for (i = 0; i <= NI_660X_MAX_RTSI_CHAN; ++i) { |
| if (src == NI_660X_RTSI_CLK(i)) { |
| clock_source = NI_GPCT_RTSI_CLOCK_SRC_BITS(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_660X_MAX_SRC_PIN; ++i) { |
| if (src == NI_660X_SRC_PIN_CLK(i)) { |
| clock_source = |
| NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_SRC_PIN) |
| break; |
| return -EINVAL; |
| } |
| clock_source |= ni_tio_clock_src_modifiers(counter); |
| *clk_src = clock_source; |
| return 0; |
| } |
| |
| static int ni_tio_generic_clock_src_select(const struct ni_gpct *counter, |
| unsigned int *clk_src) |
| { |
| switch (counter->counter_dev->variant) { |
| case ni_gpct_variant_e_series: |
| case ni_gpct_variant_m_series: |
| default: |
| return ni_m_series_clock_src_select(counter, clk_src); |
| case ni_gpct_variant_660x: |
| return ni_660x_clock_src_select(counter, clk_src); |
| } |
| } |
| |
| static void ni_tio_set_sync_mode(struct ni_gpct *counter) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| static const u64 min_normal_sync_period_ps = 25000; |
| unsigned int mask = 0; |
| unsigned int bits = 0; |
| unsigned int reg; |
| unsigned int mode; |
| unsigned int clk_src = 0; |
| u64 ps = 0; |
| int ret; |
| bool force_alt_sync; |
| |
| /* only m series and 660x variants have counting mode registers */ |
| switch (counter_dev->variant) { |
| case ni_gpct_variant_e_series: |
| default: |
| return; |
| case ni_gpct_variant_m_series: |
| mask = GI_M_ALT_SYNC; |
| break; |
| case ni_gpct_variant_660x: |
| mask = GI_660X_ALT_SYNC; |
| break; |
| } |
| |
| reg = NITIO_CNT_MODE_REG(cidx); |
| mode = ni_tio_get_soft_copy(counter, reg); |
| switch (mode & GI_CNT_MODE_MASK) { |
| case GI_CNT_MODE_QUADX1: |
| case GI_CNT_MODE_QUADX2: |
| case GI_CNT_MODE_QUADX4: |
| case GI_CNT_MODE_SYNC_SRC: |
| force_alt_sync = true; |
| break; |
| default: |
| force_alt_sync = false; |
| break; |
| } |
| |
| ret = ni_tio_generic_clock_src_select(counter, &clk_src); |
| if (ret) |
| return; |
| ret = ni_tio_clock_period_ps(counter, clk_src, &ps); |
| if (ret) |
| return; |
| /* |
| * It's not clear what we should do if clock_period is unknown, so we |
| * are not using the alt sync bit in that case. |
| */ |
| if (force_alt_sync || (ps && ps < min_normal_sync_period_ps)) |
| bits = mask; |
| |
| ni_tio_set_bits(counter, reg, mask, bits); |
| } |
| |
| static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned int mode) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int mode_reg_mask; |
| unsigned int mode_reg_values; |
| unsigned int input_select_bits = 0; |
| /* these bits map directly on to the mode register */ |
| static const unsigned int mode_reg_direct_mask = |
| NI_GPCT_GATE_ON_BOTH_EDGES_BIT | NI_GPCT_EDGE_GATE_MODE_MASK | |
| NI_GPCT_STOP_MODE_MASK | NI_GPCT_OUTPUT_MODE_MASK | |
| NI_GPCT_HARDWARE_DISARM_MASK | NI_GPCT_LOADING_ON_TC_BIT | |
| NI_GPCT_LOADING_ON_GATE_BIT | NI_GPCT_LOAD_B_SELECT_BIT; |
| |
| mode_reg_mask = mode_reg_direct_mask | GI_RELOAD_SRC_SWITCHING; |
| mode_reg_values = mode & mode_reg_direct_mask; |
| switch (mode & NI_GPCT_RELOAD_SOURCE_MASK) { |
| case NI_GPCT_RELOAD_SOURCE_FIXED_BITS: |
| break; |
| case NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS: |
| mode_reg_values |= GI_RELOAD_SRC_SWITCHING; |
| break; |
| case NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS: |
| input_select_bits |= GI_GATE_SEL_LOAD_SRC; |
| mode_reg_mask |= GI_GATING_MODE_MASK; |
| mode_reg_values |= GI_LEVEL_GATING; |
| break; |
| default: |
| break; |
| } |
| ni_tio_set_bits(counter, NITIO_MODE_REG(cidx), |
| mode_reg_mask, mode_reg_values); |
| |
| if (ni_tio_counting_mode_registers_present(counter_dev)) { |
| unsigned int bits = 0; |
| |
| bits |= GI_CNT_MODE(mode >> NI_GPCT_COUNTING_MODE_SHIFT); |
| bits |= GI_INDEX_PHASE((mode >> NI_GPCT_INDEX_PHASE_BITSHIFT)); |
| if (mode & NI_GPCT_INDEX_ENABLE_BIT) |
| bits |= GI_INDEX_MODE; |
| ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), |
| GI_CNT_MODE_MASK | GI_INDEX_PHASE_MASK | |
| GI_INDEX_MODE, bits); |
| ni_tio_set_sync_mode(counter); |
| } |
| |
| ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), GI_CNT_DIR_MASK, |
| GI_CNT_DIR(mode >> NI_GPCT_COUNTING_DIRECTION_SHIFT)); |
| |
| if (mode & NI_GPCT_OR_GATE_BIT) |
| input_select_bits |= GI_OR_GATE; |
| if (mode & NI_GPCT_INVERT_OUTPUT_BIT) |
| input_select_bits |= GI_OUTPUT_POL_INVERT; |
| ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), |
| GI_GATE_SEL_LOAD_SRC | GI_OR_GATE | |
| GI_OUTPUT_POL_INVERT, input_select_bits); |
| |
| return 0; |
| } |
| |
| int ni_tio_arm(struct ni_gpct *counter, bool arm, unsigned int start_trigger) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int transient_bits = 0; |
| |
| if (arm) { |
| unsigned int mask = 0; |
| unsigned int bits = 0; |
| |
| /* only m series and 660x have counting mode registers */ |
| switch (counter_dev->variant) { |
| case ni_gpct_variant_e_series: |
| default: |
| break; |
| case ni_gpct_variant_m_series: |
| mask = GI_M_HW_ARM_SEL_MASK; |
| break; |
| case ni_gpct_variant_660x: |
| mask = GI_660X_HW_ARM_SEL_MASK; |
| break; |
| } |
| |
| switch (start_trigger) { |
| case NI_GPCT_ARM_IMMEDIATE: |
| transient_bits |= GI_ARM; |
| break; |
| case NI_GPCT_ARM_PAIRED_IMMEDIATE: |
| transient_bits |= GI_ARM | GI_ARM_COPY; |
| break; |
| default: |
| /* |
| * for m series and 660x, pass-through the least |
| * significant bits so we can figure out what select |
| * later |
| */ |
| if (mask && (start_trigger & NI_GPCT_ARM_UNKNOWN)) { |
| bits |= GI_HW_ARM_ENA | |
| (GI_HW_ARM_SEL(start_trigger) & mask); |
| } else { |
| return -EINVAL; |
| } |
| break; |
| } |
| |
| if (mask) |
| ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), |
| GI_HW_ARM_ENA | mask, bits); |
| } else { |
| transient_bits |= GI_DISARM; |
| } |
| ni_tio_set_bits_transient(counter, NITIO_CMD_REG(cidx), |
| 0, 0, transient_bits); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_arm); |
| |
| static int ni_660x_clk_src(unsigned int clock_source, unsigned int *bits) |
| { |
| unsigned int clk_src = clock_source & NI_GPCT_CLOCK_SRC_SELECT_MASK; |
| unsigned int ni_660x_clock; |
| unsigned int i; |
| |
| switch (clk_src) { |
| case NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS: |
| ni_660x_clock = NI_660X_TIMEBASE_1_CLK; |
| break; |
| case NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS: |
| ni_660x_clock = NI_660X_TIMEBASE_2_CLK; |
| break; |
| case NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS: |
| ni_660x_clock = NI_660X_TIMEBASE_3_CLK; |
| break; |
| case NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS: |
| ni_660x_clock = NI_660X_LOGIC_LOW_CLK; |
| break; |
| case NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS: |
| ni_660x_clock = NI_660X_SRC_PIN_I_CLK; |
| break; |
| case NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS: |
| ni_660x_clock = NI_660X_NEXT_GATE_CLK; |
| break; |
| case NI_GPCT_NEXT_TC_CLOCK_SRC_BITS: |
| ni_660x_clock = NI_660X_NEXT_TC_CLK; |
| break; |
| default: |
| for (i = 0; i <= NI_660X_MAX_RTSI_CHAN; ++i) { |
| if (clk_src == NI_GPCT_RTSI_CLOCK_SRC_BITS(i)) { |
| ni_660x_clock = NI_660X_RTSI_CLK(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_660X_MAX_SRC_PIN; ++i) { |
| if (clk_src == NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(i)) { |
| ni_660x_clock = NI_660X_SRC_PIN_CLK(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_SRC_PIN) |
| break; |
| return -EINVAL; |
| } |
| *bits = GI_SRC_SEL(ni_660x_clock); |
| return 0; |
| } |
| |
| static int ni_m_clk_src(unsigned int clock_source, unsigned int *bits) |
| { |
| unsigned int clk_src = clock_source & NI_GPCT_CLOCK_SRC_SELECT_MASK; |
| unsigned int ni_m_series_clock; |
| unsigned int i; |
| |
| switch (clk_src) { |
| case NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_TIMEBASE_1_CLK; |
| break; |
| case NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_TIMEBASE_2_CLK; |
| break; |
| case NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_TIMEBASE_3_CLK; |
| break; |
| case NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_LOGIC_LOW_CLK; |
| break; |
| case NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_NEXT_GATE_CLK; |
| break; |
| case NI_GPCT_NEXT_TC_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_NEXT_TC_CLK; |
| break; |
| case NI_GPCT_PXI10_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_PXI10_CLK; |
| break; |
| case NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_PXI_STAR_TRIGGER_CLK; |
| break; |
| case NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS: |
| ni_m_series_clock = NI_M_ANALOG_TRIGGER_OUT_CLK; |
| break; |
| default: |
| for (i = 0; i <= NI_M_MAX_RTSI_CHAN; ++i) { |
| if (clk_src == NI_GPCT_RTSI_CLOCK_SRC_BITS(i)) { |
| ni_m_series_clock = NI_M_RTSI_CLK(i); |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_M_MAX_PFI_CHAN; ++i) { |
| if (clk_src == NI_GPCT_PFI_CLOCK_SRC_BITS(i)) { |
| ni_m_series_clock = NI_M_PFI_CLK(i); |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_PFI_CHAN) |
| break; |
| return -EINVAL; |
| } |
| *bits = GI_SRC_SEL(ni_m_series_clock); |
| return 0; |
| }; |
| |
| static void ni_tio_set_source_subselect(struct ni_gpct *counter, |
| unsigned int clock_source) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int chip = counter->chip_index; |
| unsigned int second_gate_reg = NITIO_GATE2_REG(cidx); |
| |
| if (counter_dev->variant != ni_gpct_variant_m_series) |
| return; |
| switch (clock_source & NI_GPCT_CLOCK_SRC_SELECT_MASK) { |
| /* Gi_Source_Subselect is zero */ |
| case NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS: |
| case NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS: |
| counter_dev->regs[chip][second_gate_reg] &= ~GI_SRC_SUBSEL; |
| break; |
| /* Gi_Source_Subselect is one */ |
| case NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS: |
| case NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS: |
| counter_dev->regs[chip][second_gate_reg] |= GI_SRC_SUBSEL; |
| break; |
| /* Gi_Source_Subselect doesn't matter */ |
| default: |
| return; |
| } |
| ni_tio_write(counter, counter_dev->regs[chip][second_gate_reg], |
| second_gate_reg); |
| } |
| |
| static int ni_tio_set_clock_src(struct ni_gpct *counter, |
| unsigned int clock_source, |
| unsigned int period_ns) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int bits = 0; |
| int ret; |
| |
| switch (counter_dev->variant) { |
| case ni_gpct_variant_660x: |
| ret = ni_660x_clk_src(clock_source, &bits); |
| break; |
| case ni_gpct_variant_e_series: |
| case ni_gpct_variant_m_series: |
| default: |
| ret = ni_m_clk_src(clock_source, &bits); |
| break; |
| } |
| if (ret) { |
| struct comedi_device *dev = counter_dev->dev; |
| |
| dev_err(dev->class_dev, "invalid clock source 0x%x\n", |
| clock_source); |
| return ret; |
| } |
| |
| if (clock_source & NI_GPCT_INVERT_CLOCK_SRC_BIT) |
| bits |= GI_SRC_POL_INVERT; |
| ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), |
| GI_SRC_SEL_MASK | GI_SRC_POL_INVERT, bits); |
| ni_tio_set_source_subselect(counter, clock_source); |
| |
| if (ni_tio_counting_mode_registers_present(counter_dev)) { |
| bits = 0; |
| switch (clock_source & NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK) { |
| case NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS: |
| break; |
| case NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS: |
| bits |= GI_PRESCALE_X2(counter_dev->variant); |
| break; |
| case NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS: |
| bits |= GI_PRESCALE_X8(counter_dev->variant); |
| break; |
| default: |
| return -EINVAL; |
| } |
| ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), |
| GI_PRESCALE_X2(counter_dev->variant) | |
| GI_PRESCALE_X8(counter_dev->variant), bits); |
| } |
| counter->clock_period_ps = period_ns * 1000; |
| ni_tio_set_sync_mode(counter); |
| return 0; |
| } |
| |
| static int ni_tio_get_clock_src(struct ni_gpct *counter, |
| unsigned int *clock_source, |
| unsigned int *period_ns) |
| { |
| u64 temp64 = 0; |
| int ret; |
| |
| ret = ni_tio_generic_clock_src_select(counter, clock_source); |
| if (ret) |
| return ret; |
| ret = ni_tio_clock_period_ps(counter, *clock_source, &temp64); |
| if (ret) |
| return ret; |
| do_div(temp64, 1000); /* ps to ns */ |
| *period_ns = temp64; |
| return 0; |
| } |
| |
| static inline void ni_tio_set_gate_raw(struct ni_gpct *counter, |
| unsigned int gate_source) |
| { |
| ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(counter->counter_index), |
| GI_GATE_SEL_MASK, GI_GATE_SEL(gate_source)); |
| } |
| |
| static inline void ni_tio_set_gate2_raw(struct ni_gpct *counter, |
| unsigned int gate_source) |
| { |
| ni_tio_set_bits(counter, NITIO_GATE2_REG(counter->counter_index), |
| GI_GATE2_SEL_MASK, GI_GATE2_SEL(gate_source)); |
| } |
| |
| /* Set the mode bits for gate. */ |
| static inline void ni_tio_set_gate_mode(struct ni_gpct *counter, |
| unsigned int src) |
| { |
| unsigned int mode_bits = 0; |
| |
| if (CR_CHAN(src) & NI_GPCT_DISABLED_GATE_SELECT) { |
| /* |
| * Allowing bitwise comparison here to allow non-zero raw |
| * register value to be used for channel when disabling. |
| */ |
| mode_bits = GI_GATING_DISABLED; |
| } else { |
| if (src & CR_INVERT) |
| mode_bits |= GI_GATE_POL_INVERT; |
| if (src & CR_EDGE) |
| mode_bits |= GI_RISING_EDGE_GATING; |
| else |
| mode_bits |= GI_LEVEL_GATING; |
| } |
| ni_tio_set_bits(counter, NITIO_MODE_REG(counter->counter_index), |
| GI_GATE_POL_INVERT | GI_GATING_MODE_MASK, |
| mode_bits); |
| } |
| |
| /* |
| * Set the mode bits for gate2. |
| * |
| * Previously, the code this function represents did not actually write anything |
| * to the register. Rather, writing to this register was reserved for the code |
| * ni ni_tio_set_gate2_raw. |
| */ |
| static inline void ni_tio_set_gate2_mode(struct ni_gpct *counter, |
| unsigned int src) |
| { |
| /* |
| * The GI_GATE2_MODE bit was previously set in the code that also sets |
| * the gate2 source. |
| * We'll set mode bits _after_ source bits now, and thus, this function |
| * will effectively enable the second gate after all bits are set. |
| */ |
| unsigned int mode_bits = GI_GATE2_MODE; |
| |
| if (CR_CHAN(src) & NI_GPCT_DISABLED_GATE_SELECT) |
| /* |
| * Allowing bitwise comparison here to allow non-zero raw |
| * register value to be used for channel when disabling. |
| */ |
| mode_bits = GI_GATING_DISABLED; |
| if (src & CR_INVERT) |
| mode_bits |= GI_GATE2_POL_INVERT; |
| |
| ni_tio_set_bits(counter, NITIO_GATE2_REG(counter->counter_index), |
| GI_GATE2_POL_INVERT | GI_GATE2_MODE, mode_bits); |
| } |
| |
| static int ni_660x_set_gate(struct ni_gpct *counter, unsigned int gate_source) |
| { |
| unsigned int chan = CR_CHAN(gate_source); |
| unsigned int gate_sel; |
| unsigned int i; |
| |
| switch (chan) { |
| case NI_GPCT_NEXT_SOURCE_GATE_SELECT: |
| gate_sel = NI_660X_NEXT_SRC_GATE_SEL; |
| break; |
| case NI_GPCT_NEXT_OUT_GATE_SELECT: |
| case NI_GPCT_LOGIC_LOW_GATE_SELECT: |
| case NI_GPCT_SOURCE_PIN_i_GATE_SELECT: |
| case NI_GPCT_GATE_PIN_i_GATE_SELECT: |
| gate_sel = chan & 0x1f; |
| break; |
| default: |
| for (i = 0; i <= NI_660X_MAX_RTSI_CHAN; ++i) { |
| if (chan == NI_GPCT_RTSI_GATE_SELECT(i)) { |
| gate_sel = chan & 0x1f; |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_660X_MAX_GATE_PIN; ++i) { |
| if (chan == NI_GPCT_GATE_PIN_GATE_SELECT(i)) { |
| gate_sel = chan & 0x1f; |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_GATE_PIN) |
| break; |
| return -EINVAL; |
| } |
| ni_tio_set_gate_raw(counter, gate_sel); |
| return 0; |
| } |
| |
| static int ni_m_set_gate(struct ni_gpct *counter, unsigned int gate_source) |
| { |
| unsigned int chan = CR_CHAN(gate_source); |
| unsigned int gate_sel; |
| unsigned int i; |
| |
| switch (chan) { |
| case NI_GPCT_TIMESTAMP_MUX_GATE_SELECT: |
| case NI_GPCT_AI_START2_GATE_SELECT: |
| case NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT: |
| case NI_GPCT_NEXT_OUT_GATE_SELECT: |
| case NI_GPCT_AI_START1_GATE_SELECT: |
| case NI_GPCT_NEXT_SOURCE_GATE_SELECT: |
| case NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT: |
| case NI_GPCT_LOGIC_LOW_GATE_SELECT: |
| gate_sel = chan & 0x1f; |
| break; |
| default: |
| for (i = 0; i <= NI_M_MAX_RTSI_CHAN; ++i) { |
| if (chan == NI_GPCT_RTSI_GATE_SELECT(i)) { |
| gate_sel = chan & 0x1f; |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_M_MAX_PFI_CHAN; ++i) { |
| if (chan == NI_GPCT_PFI_GATE_SELECT(i)) { |
| gate_sel = chan & 0x1f; |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_PFI_CHAN) |
| break; |
| return -EINVAL; |
| } |
| ni_tio_set_gate_raw(counter, gate_sel); |
| return 0; |
| } |
| |
| static int ni_660x_set_gate2(struct ni_gpct *counter, unsigned int gate_source) |
| { |
| unsigned int chan = CR_CHAN(gate_source); |
| unsigned int gate2_sel; |
| unsigned int i; |
| |
| switch (chan) { |
| case NI_GPCT_SOURCE_PIN_i_GATE_SELECT: |
| case NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT: |
| case NI_GPCT_SELECTED_GATE_GATE_SELECT: |
| case NI_GPCT_NEXT_OUT_GATE_SELECT: |
| case NI_GPCT_LOGIC_LOW_GATE_SELECT: |
| gate2_sel = chan & 0x1f; |
| break; |
| case NI_GPCT_NEXT_SOURCE_GATE_SELECT: |
| gate2_sel = NI_660X_NEXT_SRC_GATE2_SEL; |
| break; |
| default: |
| for (i = 0; i <= NI_660X_MAX_RTSI_CHAN; ++i) { |
| if (chan == NI_GPCT_RTSI_GATE_SELECT(i)) { |
| gate2_sel = chan & 0x1f; |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_660X_MAX_UP_DOWN_PIN; ++i) { |
| if (chan == NI_GPCT_UP_DOWN_PIN_GATE_SELECT(i)) { |
| gate2_sel = chan & 0x1f; |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_UP_DOWN_PIN) |
| break; |
| return -EINVAL; |
| } |
| ni_tio_set_gate2_raw(counter, gate2_sel); |
| return 0; |
| } |
| |
| static int ni_m_set_gate2(struct ni_gpct *counter, unsigned int gate_source) |
| { |
| /* |
| * FIXME: We don't know what the m-series second gate codes are, |
| * so we'll just pass the bits through for now. |
| */ |
| ni_tio_set_gate2_raw(counter, gate_source); |
| return 0; |
| } |
| |
| int ni_tio_set_gate_src_raw(struct ni_gpct *counter, |
| unsigned int gate, unsigned int src) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| |
| switch (gate) { |
| case 0: |
| /* 1. start by disabling gate */ |
| ni_tio_set_gate_mode(counter, NI_GPCT_DISABLED_GATE_SELECT); |
| /* 2. set the requested gate source */ |
| ni_tio_set_gate_raw(counter, src); |
| /* 3. reenable & set mode to starts things back up */ |
| ni_tio_set_gate_mode(counter, src); |
| break; |
| case 1: |
| if (!ni_tio_has_gate2_registers(counter_dev)) |
| return -EINVAL; |
| |
| /* 1. start by disabling gate */ |
| ni_tio_set_gate2_mode(counter, NI_GPCT_DISABLED_GATE_SELECT); |
| /* 2. set the requested gate source */ |
| ni_tio_set_gate2_raw(counter, src); |
| /* 3. reenable & set mode to starts things back up */ |
| ni_tio_set_gate2_mode(counter, src); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_set_gate_src_raw); |
| |
| int ni_tio_set_gate_src(struct ni_gpct *counter, |
| unsigned int gate, unsigned int src) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| /* |
| * mask off disable flag. This high bit still passes CR_CHAN. |
| * Doing this allows one to both set the gate as disabled, but also |
| * change the route value of the gate. |
| */ |
| int chan = CR_CHAN(src) & (~NI_GPCT_DISABLED_GATE_SELECT); |
| int ret; |
| |
| switch (gate) { |
| case 0: |
| /* 1. start by disabling gate */ |
| ni_tio_set_gate_mode(counter, NI_GPCT_DISABLED_GATE_SELECT); |
| /* 2. set the requested gate source */ |
| switch (counter_dev->variant) { |
| case ni_gpct_variant_e_series: |
| case ni_gpct_variant_m_series: |
| ret = ni_m_set_gate(counter, chan); |
| break; |
| case ni_gpct_variant_660x: |
| ret = ni_660x_set_gate(counter, chan); |
| break; |
| default: |
| return -EINVAL; |
| } |
| if (ret) |
| return ret; |
| /* 3. reenable & set mode to starts things back up */ |
| ni_tio_set_gate_mode(counter, src); |
| break; |
| case 1: |
| if (!ni_tio_has_gate2_registers(counter_dev)) |
| return -EINVAL; |
| |
| /* 1. start by disabling gate */ |
| ni_tio_set_gate2_mode(counter, NI_GPCT_DISABLED_GATE_SELECT); |
| /* 2. set the requested gate source */ |
| switch (counter_dev->variant) { |
| case ni_gpct_variant_m_series: |
| ret = ni_m_set_gate2(counter, chan); |
| break; |
| case ni_gpct_variant_660x: |
| ret = ni_660x_set_gate2(counter, chan); |
| break; |
| default: |
| return -EINVAL; |
| } |
| if (ret) |
| return ret; |
| /* 3. reenable & set mode to starts things back up */ |
| ni_tio_set_gate2_mode(counter, src); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_set_gate_src); |
| |
| static int ni_tio_set_other_src(struct ni_gpct *counter, unsigned int index, |
| unsigned int source) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int chip = counter->chip_index; |
| unsigned int abz_reg, shift, mask; |
| |
| if (counter_dev->variant != ni_gpct_variant_m_series) |
| return -EINVAL; |
| |
| abz_reg = NITIO_ABZ_REG(cidx); |
| |
| /* allow for new device-global names */ |
| if (index == NI_GPCT_SOURCE_ENCODER_A || |
| (index >= NI_CtrA(0) && index <= NI_CtrA(-1))) { |
| shift = 10; |
| } else if (index == NI_GPCT_SOURCE_ENCODER_B || |
| (index >= NI_CtrB(0) && index <= NI_CtrB(-1))) { |
| shift = 5; |
| } else if (index == NI_GPCT_SOURCE_ENCODER_Z || |
| (index >= NI_CtrZ(0) && index <= NI_CtrZ(-1))) { |
| shift = 0; |
| } else { |
| return -EINVAL; |
| } |
| |
| mask = 0x1f << shift; |
| if (source > 0x1f) |
| source = 0x1f; /* Disable gate */ |
| |
| counter_dev->regs[chip][abz_reg] &= ~mask; |
| counter_dev->regs[chip][abz_reg] |= (source << shift) & mask; |
| ni_tio_write(counter, counter_dev->regs[chip][abz_reg], abz_reg); |
| return 0; |
| } |
| |
| static int ni_tio_get_other_src(struct ni_gpct *counter, unsigned int index, |
| unsigned int *source) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int abz_reg, shift, mask; |
| |
| if (counter_dev->variant != ni_gpct_variant_m_series) |
| /* A,B,Z only valid for m-series */ |
| return -EINVAL; |
| |
| abz_reg = NITIO_ABZ_REG(cidx); |
| |
| /* allow for new device-global names */ |
| if (index == NI_GPCT_SOURCE_ENCODER_A || |
| (index >= NI_CtrA(0) && index <= NI_CtrA(-1))) { |
| shift = 10; |
| } else if (index == NI_GPCT_SOURCE_ENCODER_B || |
| (index >= NI_CtrB(0) && index <= NI_CtrB(-1))) { |
| shift = 5; |
| } else if (index == NI_GPCT_SOURCE_ENCODER_Z || |
| (index >= NI_CtrZ(0) && index <= NI_CtrZ(-1))) { |
| shift = 0; |
| } else { |
| return -EINVAL; |
| } |
| |
| mask = 0x1f; |
| |
| *source = (ni_tio_get_soft_copy(counter, abz_reg) >> shift) & mask; |
| return 0; |
| } |
| |
| static int ni_660x_gate_to_generic_gate(unsigned int gate, unsigned int *src) |
| { |
| unsigned int source; |
| unsigned int i; |
| |
| switch (gate) { |
| case NI_660X_SRC_PIN_I_GATE_SEL: |
| source = NI_GPCT_SOURCE_PIN_i_GATE_SELECT; |
| break; |
| case NI_660X_GATE_PIN_I_GATE_SEL: |
| source = NI_GPCT_GATE_PIN_i_GATE_SELECT; |
| break; |
| case NI_660X_NEXT_SRC_GATE_SEL: |
| source = NI_GPCT_NEXT_SOURCE_GATE_SELECT; |
| break; |
| case NI_660X_NEXT_OUT_GATE_SEL: |
| source = NI_GPCT_NEXT_OUT_GATE_SELECT; |
| break; |
| case NI_660X_LOGIC_LOW_GATE_SEL: |
| source = NI_GPCT_LOGIC_LOW_GATE_SELECT; |
| break; |
| default: |
| for (i = 0; i <= NI_660X_MAX_RTSI_CHAN; ++i) { |
| if (gate == NI_660X_RTSI_GATE_SEL(i)) { |
| source = NI_GPCT_RTSI_GATE_SELECT(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_660X_MAX_GATE_PIN; ++i) { |
| if (gate == NI_660X_PIN_GATE_SEL(i)) { |
| source = NI_GPCT_GATE_PIN_GATE_SELECT(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_GATE_PIN) |
| break; |
| return -EINVAL; |
| } |
| *src = source; |
| return 0; |
| } |
| |
| static int ni_m_gate_to_generic_gate(unsigned int gate, unsigned int *src) |
| { |
| unsigned int source; |
| unsigned int i; |
| |
| switch (gate) { |
| case NI_M_TIMESTAMP_MUX_GATE_SEL: |
| source = NI_GPCT_TIMESTAMP_MUX_GATE_SELECT; |
| break; |
| case NI_M_AI_START2_GATE_SEL: |
| source = NI_GPCT_AI_START2_GATE_SELECT; |
| break; |
| case NI_M_PXI_STAR_TRIGGER_GATE_SEL: |
| source = NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT; |
| break; |
| case NI_M_NEXT_OUT_GATE_SEL: |
| source = NI_GPCT_NEXT_OUT_GATE_SELECT; |
| break; |
| case NI_M_AI_START1_GATE_SEL: |
| source = NI_GPCT_AI_START1_GATE_SELECT; |
| break; |
| case NI_M_NEXT_SRC_GATE_SEL: |
| source = NI_GPCT_NEXT_SOURCE_GATE_SELECT; |
| break; |
| case NI_M_ANALOG_TRIG_OUT_GATE_SEL: |
| source = NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT; |
| break; |
| case NI_M_LOGIC_LOW_GATE_SEL: |
| source = NI_GPCT_LOGIC_LOW_GATE_SELECT; |
| break; |
| default: |
| for (i = 0; i <= NI_M_MAX_RTSI_CHAN; ++i) { |
| if (gate == NI_M_RTSI_GATE_SEL(i)) { |
| source = NI_GPCT_RTSI_GATE_SELECT(i); |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_M_MAX_PFI_CHAN; ++i) { |
| if (gate == NI_M_PFI_GATE_SEL(i)) { |
| source = NI_GPCT_PFI_GATE_SELECT(i); |
| break; |
| } |
| } |
| if (i <= NI_M_MAX_PFI_CHAN) |
| break; |
| return -EINVAL; |
| } |
| *src = source; |
| return 0; |
| } |
| |
| static int ni_660x_gate2_to_generic_gate(unsigned int gate, unsigned int *src) |
| { |
| unsigned int source; |
| unsigned int i; |
| |
| switch (gate) { |
| case NI_660X_SRC_PIN_I_GATE2_SEL: |
| source = NI_GPCT_SOURCE_PIN_i_GATE_SELECT; |
| break; |
| case NI_660X_UD_PIN_I_GATE2_SEL: |
| source = NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT; |
| break; |
| case NI_660X_NEXT_SRC_GATE2_SEL: |
| source = NI_GPCT_NEXT_SOURCE_GATE_SELECT; |
| break; |
| case NI_660X_NEXT_OUT_GATE2_SEL: |
| source = NI_GPCT_NEXT_OUT_GATE_SELECT; |
| break; |
| case NI_660X_SELECTED_GATE2_SEL: |
| source = NI_GPCT_SELECTED_GATE_GATE_SELECT; |
| break; |
| case NI_660X_LOGIC_LOW_GATE2_SEL: |
| source = NI_GPCT_LOGIC_LOW_GATE_SELECT; |
| break; |
| default: |
| for (i = 0; i <= NI_660X_MAX_RTSI_CHAN; ++i) { |
| if (gate == NI_660X_RTSI_GATE2_SEL(i)) { |
| source = NI_GPCT_RTSI_GATE_SELECT(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_RTSI_CHAN) |
| break; |
| for (i = 0; i <= NI_660X_MAX_UP_DOWN_PIN; ++i) { |
| if (gate == NI_660X_UD_PIN_GATE2_SEL(i)) { |
| source = NI_GPCT_UP_DOWN_PIN_GATE_SELECT(i); |
| break; |
| } |
| } |
| if (i <= NI_660X_MAX_UP_DOWN_PIN) |
| break; |
| return -EINVAL; |
| } |
| *src = source; |
| return 0; |
| } |
| |
| static int ni_m_gate2_to_generic_gate(unsigned int gate, unsigned int *src) |
| { |
| /* |
| * FIXME: the second gate sources for the m series are undocumented, |
| * so we just return the raw bits for now. |
| */ |
| *src = gate; |
| return 0; |
| } |
| |
| static inline unsigned int ni_tio_get_gate_mode(struct ni_gpct *counter) |
| { |
| unsigned int mode = ni_tio_get_soft_copy(counter, |
| NITIO_MODE_REG(counter->counter_index)); |
| unsigned int ret = 0; |
| |
| if ((mode & GI_GATING_MODE_MASK) == GI_GATING_DISABLED) |
| ret |= NI_GPCT_DISABLED_GATE_SELECT; |
| if (mode & GI_GATE_POL_INVERT) |
| ret |= CR_INVERT; |
| if ((mode & GI_GATING_MODE_MASK) != GI_LEVEL_GATING) |
| ret |= CR_EDGE; |
| |
| return ret; |
| } |
| |
| static inline unsigned int ni_tio_get_gate2_mode(struct ni_gpct *counter) |
| { |
| unsigned int mode = ni_tio_get_soft_copy(counter, |
| NITIO_GATE2_REG(counter->counter_index)); |
| unsigned int ret = 0; |
| |
| if (!(mode & GI_GATE2_MODE)) |
| ret |= NI_GPCT_DISABLED_GATE_SELECT; |
| if (mode & GI_GATE2_POL_INVERT) |
| ret |= CR_INVERT; |
| |
| return ret; |
| } |
| |
| static inline unsigned int ni_tio_get_gate_val(struct ni_gpct *counter) |
| { |
| return GI_BITS_TO_GATE(ni_tio_get_soft_copy(counter, |
| NITIO_INPUT_SEL_REG(counter->counter_index))); |
| } |
| |
| static inline unsigned int ni_tio_get_gate2_val(struct ni_gpct *counter) |
| { |
| return GI_BITS_TO_GATE2(ni_tio_get_soft_copy(counter, |
| NITIO_GATE2_REG(counter->counter_index))); |
| } |
| |
| static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned int gate_index, |
| unsigned int *gate_source) |
| { |
| unsigned int gate; |
| int ret; |
| |
| switch (gate_index) { |
| case 0: |
| gate = ni_tio_get_gate_val(counter); |
| switch (counter->counter_dev->variant) { |
| case ni_gpct_variant_e_series: |
| case ni_gpct_variant_m_series: |
| default: |
| ret = ni_m_gate_to_generic_gate(gate, gate_source); |
| break; |
| case ni_gpct_variant_660x: |
| ret = ni_660x_gate_to_generic_gate(gate, gate_source); |
| break; |
| } |
| if (ret) |
| return ret; |
| *gate_source |= ni_tio_get_gate_mode(counter); |
| break; |
| case 1: |
| gate = ni_tio_get_gate2_val(counter); |
| switch (counter->counter_dev->variant) { |
| case ni_gpct_variant_e_series: |
| case ni_gpct_variant_m_series: |
| default: |
| ret = ni_m_gate2_to_generic_gate(gate, gate_source); |
| break; |
| case ni_gpct_variant_660x: |
| ret = ni_660x_gate2_to_generic_gate(gate, gate_source); |
| break; |
| } |
| if (ret) |
| return ret; |
| *gate_source |= ni_tio_get_gate2_mode(counter); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int ni_tio_get_gate_src_raw(struct ni_gpct *counter, |
| unsigned int gate_index, |
| unsigned int *gate_source) |
| { |
| switch (gate_index) { |
| case 0: |
| *gate_source = ni_tio_get_gate_mode(counter) |
| | ni_tio_get_gate_val(counter); |
| break; |
| case 1: |
| *gate_source = ni_tio_get_gate2_mode(counter) |
| | ni_tio_get_gate2_val(counter); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| int ni_tio_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| struct ni_gpct *counter = s->private; |
| unsigned int cidx = counter->counter_index; |
| unsigned int status; |
| int ret = 0; |
| |
| switch (data[0]) { |
| case INSN_CONFIG_SET_COUNTER_MODE: |
| ret = ni_tio_set_counter_mode(counter, data[1]); |
| break; |
| case INSN_CONFIG_ARM: |
| ret = ni_tio_arm(counter, true, data[1]); |
| break; |
| case INSN_CONFIG_DISARM: |
| ret = ni_tio_arm(counter, false, 0); |
| break; |
| case INSN_CONFIG_GET_COUNTER_STATUS: |
| data[1] = 0; |
| status = ni_tio_read(counter, NITIO_SHARED_STATUS_REG(cidx)); |
| if (status & GI_ARMED(cidx)) { |
| data[1] |= COMEDI_COUNTER_ARMED; |
| if (status & GI_COUNTING(cidx)) |
| data[1] |= COMEDI_COUNTER_COUNTING; |
| } |
| data[2] = COMEDI_COUNTER_ARMED | COMEDI_COUNTER_COUNTING; |
| break; |
| case INSN_CONFIG_SET_CLOCK_SRC: |
| ret = ni_tio_set_clock_src(counter, data[1], data[2]); |
| break; |
| case INSN_CONFIG_GET_CLOCK_SRC: |
| ret = ni_tio_get_clock_src(counter, &data[1], &data[2]); |
| break; |
| case INSN_CONFIG_SET_GATE_SRC: |
| ret = ni_tio_set_gate_src(counter, data[1], data[2]); |
| break; |
| case INSN_CONFIG_GET_GATE_SRC: |
| ret = ni_tio_get_gate_src(counter, data[1], &data[2]); |
| break; |
| case INSN_CONFIG_SET_OTHER_SRC: |
| ret = ni_tio_set_other_src(counter, data[1], data[2]); |
| break; |
| case INSN_CONFIG_RESET: |
| ni_tio_reset_count_and_disarm(counter); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return ret ? ret : insn->n; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_insn_config); |
| |
| /* |
| * Retrieves the register value of the current source of the output selector for |
| * the given destination. |
| * |
| * If the terminal for the destination is not already configured as an output, |
| * this function returns -EINVAL as error. |
| * |
| * Return: the register value of the destination output selector; |
| * -EINVAL if terminal is not configured for output. |
| */ |
| int ni_tio_get_routing(struct ni_gpct_device *counter_dev, unsigned int dest) |
| { |
| /* we need to know the actual counter below... */ |
| int ctr_index = (dest - NI_COUNTER_NAMES_BASE) % NI_MAX_COUNTERS; |
| struct ni_gpct *counter = &counter_dev->counters[ctr_index]; |
| int ret = 1; |
| unsigned int reg; |
| |
| if (dest >= NI_CtrA(0) && dest <= NI_CtrZ(-1)) { |
| ret = ni_tio_get_other_src(counter, dest, ®); |
| } else if (dest >= NI_CtrGate(0) && dest <= NI_CtrGate(-1)) { |
| ret = ni_tio_get_gate_src_raw(counter, 0, ®); |
| } else if (dest >= NI_CtrAux(0) && dest <= NI_CtrAux(-1)) { |
| ret = ni_tio_get_gate_src_raw(counter, 1, ®); |
| /* |
| * This case is not possible through this interface. A user must use |
| * INSN_CONFIG_SET_CLOCK_SRC instead. |
| * } else if (dest >= NI_CtrSource(0) && dest <= NI_CtrSource(-1)) { |
| * ret = ni_tio_set_clock_src(counter, ®, &period_ns); |
| */ |
| } |
| |
| if (ret) |
| return -EINVAL; |
| |
| return reg; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_get_routing); |
| |
| /** |
| * ni_tio_set_routing() - Sets the register value of the selector MUX for the given destination. |
| * @counter_dev: Pointer to general counter device. |
| * @dest: Device-global identifier of route destination. |
| * @reg: |
| * The first several bits of this value should store the desired |
| * value to write to the register. All other bits are for |
| * transmitting information that modify the mode of the particular |
| * destination/gate. These mode bits might include a bitwise or of |
| * CR_INVERT and CR_EDGE. Note that the calling function should |
| * have already validated the correctness of this value. |
| */ |
| int ni_tio_set_routing(struct ni_gpct_device *counter_dev, unsigned int dest, |
| unsigned int reg) |
| { |
| /* we need to know the actual counter below... */ |
| int ctr_index = (dest - NI_COUNTER_NAMES_BASE) % NI_MAX_COUNTERS; |
| struct ni_gpct *counter = &counter_dev->counters[ctr_index]; |
| int ret; |
| |
| if (dest >= NI_CtrA(0) && dest <= NI_CtrZ(-1)) { |
| ret = ni_tio_set_other_src(counter, dest, reg); |
| } else if (dest >= NI_CtrGate(0) && dest <= NI_CtrGate(-1)) { |
| ret = ni_tio_set_gate_src_raw(counter, 0, reg); |
| } else if (dest >= NI_CtrAux(0) && dest <= NI_CtrAux(-1)) { |
| ret = ni_tio_set_gate_src_raw(counter, 1, reg); |
| /* |
| * This case is not possible through this interface. A user must use |
| * INSN_CONFIG_SET_CLOCK_SRC instead. |
| * } else if (dest >= NI_CtrSource(0) && dest <= NI_CtrSource(-1)) { |
| * ret = ni_tio_set_clock_src(counter, reg, period_ns); |
| */ |
| } else { |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_set_routing); |
| |
| /* |
| * Sets the given destination MUX to its default value or disable it. |
| * |
| * Return: 0 if successful; -EINVAL if terminal is unknown. |
| */ |
| int ni_tio_unset_routing(struct ni_gpct_device *counter_dev, unsigned int dest) |
| { |
| if (dest >= NI_GATES_NAMES_BASE && dest <= NI_GATES_NAMES_MAX) |
| /* Disable gate (via mode bits) and set to default 0-value */ |
| return ni_tio_set_routing(counter_dev, dest, |
| NI_GPCT_DISABLED_GATE_SELECT); |
| /* |
| * This case is not possible through this interface. A user must use |
| * INSN_CONFIG_SET_CLOCK_SRC instead. |
| * if (dest >= NI_CtrSource(0) && dest <= NI_CtrSource(-1)) |
| * return ni_tio_set_clock_src(counter, reg, period_ns); |
| */ |
| |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_unset_routing); |
| |
| static unsigned int ni_tio_read_sw_save_reg(struct comedi_device *dev, |
| struct comedi_subdevice *s) |
| { |
| struct ni_gpct *counter = s->private; |
| unsigned int cidx = counter->counter_index; |
| unsigned int val; |
| |
| ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), GI_SAVE_TRACE, 0); |
| ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), |
| GI_SAVE_TRACE, GI_SAVE_TRACE); |
| |
| /* |
| * The count doesn't get latched until the next clock edge, so it is |
| * possible the count may change (once) while we are reading. Since |
| * the read of the SW_Save_Reg isn't atomic (apparently even when it's |
| * a 32 bit register according to 660x docs), we need to read twice |
| * and make sure the reading hasn't changed. If it has, a third read |
| * will be correct since the count value will definitely have latched |
| * by then. |
| */ |
| val = ni_tio_read(counter, NITIO_SW_SAVE_REG(cidx)); |
| if (val != ni_tio_read(counter, NITIO_SW_SAVE_REG(cidx))) |
| val = ni_tio_read(counter, NITIO_SW_SAVE_REG(cidx)); |
| |
| return val; |
| } |
| |
| int ni_tio_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| struct ni_gpct *counter = s->private; |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int channel = CR_CHAN(insn->chanspec); |
| unsigned int cidx = counter->counter_index; |
| unsigned int chip = counter->chip_index; |
| int i; |
| |
| for (i = 0; i < insn->n; i++) { |
| switch (channel) { |
| case 0: |
| data[i] = ni_tio_read_sw_save_reg(dev, s); |
| break; |
| case 1: |
| data[i] = |
| counter_dev->regs[chip][NITIO_LOADA_REG(cidx)]; |
| break; |
| case 2: |
| data[i] = |
| counter_dev->regs[chip][NITIO_LOADB_REG(cidx)]; |
| break; |
| } |
| } |
| return insn->n; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_insn_read); |
| |
| static unsigned int ni_tio_next_load_register(struct ni_gpct *counter) |
| { |
| unsigned int cidx = counter->counter_index; |
| unsigned int bits = ni_tio_read(counter, NITIO_SHARED_STATUS_REG(cidx)); |
| |
| return (bits & GI_NEXT_LOAD_SRC(cidx)) |
| ? NITIO_LOADB_REG(cidx) |
| : NITIO_LOADA_REG(cidx); |
| } |
| |
| int ni_tio_insn_write(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| struct ni_gpct *counter = s->private; |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int channel = CR_CHAN(insn->chanspec); |
| unsigned int cidx = counter->counter_index; |
| unsigned int chip = counter->chip_index; |
| unsigned int load_reg; |
| unsigned int load_val; |
| |
| if (insn->n < 1) |
| return 0; |
| load_val = data[insn->n - 1]; |
| switch (channel) { |
| case 0: |
| /* |
| * Unsafe if counter is armed. |
| * Should probably check status and return -EBUSY if armed. |
| */ |
| |
| /* |
| * Don't disturb load source select, just use whichever |
| * load register is already selected. |
| */ |
| load_reg = ni_tio_next_load_register(counter); |
| ni_tio_write(counter, load_val, load_reg); |
| ni_tio_set_bits_transient(counter, NITIO_CMD_REG(cidx), |
| 0, 0, GI_LOAD); |
| /* restore load reg */ |
| ni_tio_write(counter, counter_dev->regs[chip][load_reg], |
| load_reg); |
| break; |
| case 1: |
| counter_dev->regs[chip][NITIO_LOADA_REG(cidx)] = load_val; |
| ni_tio_write(counter, load_val, NITIO_LOADA_REG(cidx)); |
| break; |
| case 2: |
| counter_dev->regs[chip][NITIO_LOADB_REG(cidx)] = load_val; |
| ni_tio_write(counter, load_val, NITIO_LOADB_REG(cidx)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return insn->n; |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_insn_write); |
| |
| void ni_tio_init_counter(struct ni_gpct *counter) |
| { |
| struct ni_gpct_device *counter_dev = counter->counter_dev; |
| unsigned int cidx = counter->counter_index; |
| unsigned int chip = counter->chip_index; |
| |
| ni_tio_reset_count_and_disarm(counter); |
| |
| /* initialize counter registers */ |
| counter_dev->regs[chip][NITIO_AUTO_INC_REG(cidx)] = 0x0; |
| ni_tio_write(counter, 0x0, NITIO_AUTO_INC_REG(cidx)); |
| |
| ni_tio_set_bits(counter, NITIO_CMD_REG(cidx), |
| ~0, GI_SYNC_GATE); |
| |
| ni_tio_set_bits(counter, NITIO_MODE_REG(cidx), ~0, 0); |
| |
| counter_dev->regs[chip][NITIO_LOADA_REG(cidx)] = 0x0; |
| ni_tio_write(counter, 0x0, NITIO_LOADA_REG(cidx)); |
| |
| counter_dev->regs[chip][NITIO_LOADB_REG(cidx)] = 0x0; |
| ni_tio_write(counter, 0x0, NITIO_LOADB_REG(cidx)); |
| |
| ni_tio_set_bits(counter, NITIO_INPUT_SEL_REG(cidx), ~0, 0); |
| |
| if (ni_tio_counting_mode_registers_present(counter_dev)) |
| ni_tio_set_bits(counter, NITIO_CNT_MODE_REG(cidx), ~0, 0); |
| |
| if (ni_tio_has_gate2_registers(counter_dev)) { |
| counter_dev->regs[chip][NITIO_GATE2_REG(cidx)] = 0x0; |
| ni_tio_write(counter, 0x0, NITIO_GATE2_REG(cidx)); |
| } |
| |
| ni_tio_set_bits(counter, NITIO_DMA_CFG_REG(cidx), ~0, 0x0); |
| |
| ni_tio_set_bits(counter, NITIO_INT_ENA_REG(cidx), ~0, 0x0); |
| } |
| EXPORT_SYMBOL_GPL(ni_tio_init_counter); |
| |
| struct ni_gpct_device * |
| ni_gpct_device_construct(struct comedi_device *dev, |
| void (*write)(struct ni_gpct *counter, |
| unsigned int value, |
| enum ni_gpct_register reg), |
| unsigned int (*read)(struct ni_gpct *counter, |
| enum ni_gpct_register reg), |
| enum ni_gpct_variant variant, |
| unsigned int num_counters, |
| unsigned int counters_per_chip, |
| const struct ni_route_tables *routing_tables) |
| { |
| struct ni_gpct_device *counter_dev; |
| struct ni_gpct *counter; |
| unsigned int i; |
| |
| if (num_counters == 0 || counters_per_chip == 0) |
| return NULL; |
| |
| counter_dev = kzalloc(sizeof(*counter_dev), GFP_KERNEL); |
| if (!counter_dev) |
| return NULL; |
| |
| counter_dev->dev = dev; |
| counter_dev->write = write; |
| counter_dev->read = read; |
| counter_dev->variant = variant; |
| counter_dev->routing_tables = routing_tables; |
| |
| spin_lock_init(&counter_dev->regs_lock); |
| |
| counter_dev->num_counters = num_counters; |
| counter_dev->num_chips = DIV_ROUND_UP(num_counters, counters_per_chip); |
| |
| counter_dev->counters = kcalloc(num_counters, sizeof(*counter), |
| GFP_KERNEL); |
| counter_dev->regs = kcalloc(counter_dev->num_chips, |
| sizeof(*counter_dev->regs), GFP_KERNEL); |
| if (!counter_dev->regs || !counter_dev->counters) { |
| kfree(counter_dev->regs); |
| kfree(counter_dev->counters); |
| kfree(counter_dev); |
| return NULL; |
| } |
| |
| for (i = 0; i < num_counters; ++i) { |
| counter = &counter_dev->counters[i]; |
| counter->counter_dev = counter_dev; |
| counter->chip_index = i / counters_per_chip; |
| counter->counter_index = i % counters_per_chip; |
| spin_lock_init(&counter->lock); |
| } |
| |
| return counter_dev; |
| } |
| EXPORT_SYMBOL_GPL(ni_gpct_device_construct); |
| |
| void ni_gpct_device_destroy(struct ni_gpct_device *counter_dev) |
| { |
| if (!counter_dev) |
| return; |
| kfree(counter_dev->regs); |
| kfree(counter_dev->counters); |
| kfree(counter_dev); |
| } |
| EXPORT_SYMBOL_GPL(ni_gpct_device_destroy); |
| |
| static int __init ni_tio_init_module(void) |
| { |
| return 0; |
| } |
| module_init(ni_tio_init_module); |
| |
| static void __exit ni_tio_cleanup_module(void) |
| { |
| } |
| module_exit(ni_tio_cleanup_module); |
| |
| MODULE_AUTHOR("Comedi <comedi@comedi.org>"); |
| MODULE_DESCRIPTION("Comedi support for NI general-purpose counters"); |
| MODULE_LICENSE("GPL"); |