| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * zopt2201.c - Support for IDT ZOPT2201 ambient light and UV B sensor |
| * |
| * Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net> |
| * |
| * Datasheet: https://www.idt.com/document/dst/zopt2201-datasheet |
| * 7-bit I2C slave addresses 0x53 (default) or 0x52 (programmed) |
| * |
| * TODO: interrupt support, ALS/UVB raw mode |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/mutex.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| |
| #include <asm/unaligned.h> |
| |
| #define ZOPT2201_DRV_NAME "zopt2201" |
| |
| /* Registers */ |
| #define ZOPT2201_MAIN_CTRL 0x00 |
| #define ZOPT2201_LS_MEAS_RATE 0x04 |
| #define ZOPT2201_LS_GAIN 0x05 |
| #define ZOPT2201_PART_ID 0x06 |
| #define ZOPT2201_MAIN_STATUS 0x07 |
| #define ZOPT2201_ALS_DATA 0x0d /* LSB first, 13 to 20 bits */ |
| #define ZOPT2201_UVB_DATA 0x10 /* LSB first, 13 to 20 bits */ |
| #define ZOPT2201_UV_COMP_DATA 0x13 /* LSB first, 13 to 20 bits */ |
| #define ZOPT2201_COMP_DATA 0x16 /* LSB first, 13 to 20 bits */ |
| #define ZOPT2201_INT_CFG 0x19 |
| #define ZOPT2201_INT_PST 0x1a |
| |
| #define ZOPT2201_MAIN_CTRL_LS_MODE BIT(3) /* 0 .. ALS, 1 .. UV B */ |
| #define ZOPT2201_MAIN_CTRL_LS_EN BIT(1) |
| |
| /* Values for ZOPT2201_LS_MEAS_RATE resolution / bit width */ |
| #define ZOPT2201_MEAS_RES_20BIT 0 /* takes 400 ms */ |
| #define ZOPT2201_MEAS_RES_19BIT 1 /* takes 200 ms */ |
| #define ZOPT2201_MEAS_RES_18BIT 2 /* takes 100 ms, default */ |
| #define ZOPT2201_MEAS_RES_17BIT 3 /* takes 50 ms */ |
| #define ZOPT2201_MEAS_RES_16BIT 4 /* takes 25 ms */ |
| #define ZOPT2201_MEAS_RES_13BIT 5 /* takes 3.125 ms */ |
| #define ZOPT2201_MEAS_RES_SHIFT 4 |
| |
| /* Values for ZOPT2201_LS_MEAS_RATE measurement rate */ |
| #define ZOPT2201_MEAS_FREQ_25MS 0 |
| #define ZOPT2201_MEAS_FREQ_50MS 1 |
| #define ZOPT2201_MEAS_FREQ_100MS 2 /* default */ |
| #define ZOPT2201_MEAS_FREQ_200MS 3 |
| #define ZOPT2201_MEAS_FREQ_500MS 4 |
| #define ZOPT2201_MEAS_FREQ_1000MS 5 |
| #define ZOPT2201_MEAS_FREQ_2000MS 6 |
| |
| /* Values for ZOPT2201_LS_GAIN */ |
| #define ZOPT2201_LS_GAIN_1 0 |
| #define ZOPT2201_LS_GAIN_3 1 |
| #define ZOPT2201_LS_GAIN_6 2 |
| #define ZOPT2201_LS_GAIN_9 3 |
| #define ZOPT2201_LS_GAIN_18 4 |
| |
| /* Values for ZOPT2201_MAIN_STATUS */ |
| #define ZOPT2201_MAIN_STATUS_POWERON BIT(5) |
| #define ZOPT2201_MAIN_STATUS_INT BIT(4) |
| #define ZOPT2201_MAIN_STATUS_DRDY BIT(3) |
| |
| #define ZOPT2201_PART_NUMBER 0xb2 |
| |
| struct zopt2201_data { |
| struct i2c_client *client; |
| struct mutex lock; |
| u8 gain; |
| u8 res; |
| u8 rate; |
| }; |
| |
| static const struct { |
| unsigned int gain; /* gain factor */ |
| unsigned int scale; /* micro lux per count */ |
| } zopt2201_gain_als[] = { |
| { 1, 19200000 }, |
| { 3, 6400000 }, |
| { 6, 3200000 }, |
| { 9, 2133333 }, |
| { 18, 1066666 }, |
| }; |
| |
| static const struct { |
| unsigned int gain; /* gain factor */ |
| unsigned int scale; /* micro W/m2 per count */ |
| } zopt2201_gain_uvb[] = { |
| { 1, 460800 }, |
| { 3, 153600 }, |
| { 6, 76800 }, |
| { 9, 51200 }, |
| { 18, 25600 }, |
| }; |
| |
| static const struct { |
| unsigned int bits; /* sensor resolution in bits */ |
| unsigned long us; /* measurement time in micro seconds */ |
| } zopt2201_resolution[] = { |
| { 20, 400000 }, |
| { 19, 200000 }, |
| { 18, 100000 }, |
| { 17, 50000 }, |
| { 16, 25000 }, |
| { 13, 3125 }, |
| }; |
| |
| static const struct { |
| unsigned int scale, uscale; /* scale factor as integer + micro */ |
| u8 gain; /* gain register value */ |
| u8 res; /* resolution register value */ |
| } zopt2201_scale_als[] = { |
| { 19, 200000, 0, 5 }, |
| { 6, 400000, 1, 5 }, |
| { 3, 200000, 2, 5 }, |
| { 2, 400000, 0, 4 }, |
| { 2, 133333, 3, 5 }, |
| { 1, 200000, 0, 3 }, |
| { 1, 66666, 4, 5 }, |
| { 0, 800000, 1, 4 }, |
| { 0, 600000, 0, 2 }, |
| { 0, 400000, 2, 4 }, |
| { 0, 300000, 0, 1 }, |
| { 0, 266666, 3, 4 }, |
| { 0, 200000, 2, 3 }, |
| { 0, 150000, 0, 0 }, |
| { 0, 133333, 4, 4 }, |
| { 0, 100000, 2, 2 }, |
| { 0, 66666, 4, 3 }, |
| { 0, 50000, 2, 1 }, |
| { 0, 33333, 4, 2 }, |
| { 0, 25000, 2, 0 }, |
| { 0, 16666, 4, 1 }, |
| { 0, 8333, 4, 0 }, |
| }; |
| |
| static const struct { |
| unsigned int scale, uscale; /* scale factor as integer + micro */ |
| u8 gain; /* gain register value */ |
| u8 res; /* resolution register value */ |
| } zopt2201_scale_uvb[] = { |
| { 0, 460800, 0, 5 }, |
| { 0, 153600, 1, 5 }, |
| { 0, 76800, 2, 5 }, |
| { 0, 57600, 0, 4 }, |
| { 0, 51200, 3, 5 }, |
| { 0, 28800, 0, 3 }, |
| { 0, 25600, 4, 5 }, |
| { 0, 19200, 1, 4 }, |
| { 0, 14400, 0, 2 }, |
| { 0, 9600, 2, 4 }, |
| { 0, 7200, 0, 1 }, |
| { 0, 6400, 3, 4 }, |
| { 0, 4800, 2, 3 }, |
| { 0, 3600, 0, 0 }, |
| { 0, 3200, 4, 4 }, |
| { 0, 2400, 2, 2 }, |
| { 0, 1600, 4, 3 }, |
| { 0, 1200, 2, 1 }, |
| { 0, 800, 4, 2 }, |
| { 0, 600, 2, 0 }, |
| { 0, 400, 4, 1 }, |
| { 0, 200, 4, 0 }, |
| }; |
| |
| static int zopt2201_enable_mode(struct zopt2201_data *data, bool uvb_mode) |
| { |
| u8 out = ZOPT2201_MAIN_CTRL_LS_EN; |
| |
| if (uvb_mode) |
| out |= ZOPT2201_MAIN_CTRL_LS_MODE; |
| |
| return i2c_smbus_write_byte_data(data->client, ZOPT2201_MAIN_CTRL, out); |
| } |
| |
| static int zopt2201_read(struct zopt2201_data *data, u8 reg) |
| { |
| struct i2c_client *client = data->client; |
| int tries = 10; |
| u8 buf[3]; |
| int ret; |
| |
| mutex_lock(&data->lock); |
| ret = zopt2201_enable_mode(data, reg == ZOPT2201_UVB_DATA); |
| if (ret < 0) |
| goto fail; |
| |
| while (tries--) { |
| unsigned long t = zopt2201_resolution[data->res].us; |
| |
| if (t <= 20000) |
| usleep_range(t, t + 1000); |
| else |
| msleep(t / 1000); |
| ret = i2c_smbus_read_byte_data(client, ZOPT2201_MAIN_STATUS); |
| if (ret < 0) |
| goto fail; |
| if (ret & ZOPT2201_MAIN_STATUS_DRDY) |
| break; |
| } |
| |
| if (tries < 0) { |
| ret = -ETIMEDOUT; |
| goto fail; |
| } |
| |
| ret = i2c_smbus_read_i2c_block_data(client, reg, sizeof(buf), buf); |
| if (ret < 0) |
| goto fail; |
| |
| ret = i2c_smbus_write_byte_data(client, ZOPT2201_MAIN_CTRL, 0x00); |
| if (ret < 0) |
| goto fail; |
| mutex_unlock(&data->lock); |
| |
| return get_unaligned_le24(&buf[0]); |
| |
| fail: |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| static const struct iio_chan_spec zopt2201_channels[] = { |
| { |
| .type = IIO_LIGHT, |
| .address = ZOPT2201_ALS_DATA, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE), |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), |
| }, |
| { |
| .type = IIO_INTENSITY, |
| .modified = 1, |
| .channel2 = IIO_MOD_LIGHT_UV, |
| .address = ZOPT2201_UVB_DATA, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE), |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), |
| }, |
| { |
| .type = IIO_UVINDEX, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, |
| }; |
| |
| static int zopt2201_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct zopt2201_data *data = iio_priv(indio_dev); |
| u64 tmp; |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = zopt2201_read(data, chan->address); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_PROCESSED: |
| ret = zopt2201_read(data, ZOPT2201_UVB_DATA); |
| if (ret < 0) |
| return ret; |
| *val = ret * 18 * |
| (1 << (20 - zopt2201_resolution[data->res].bits)) / |
| zopt2201_gain_uvb[data->gain].gain; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->address) { |
| case ZOPT2201_ALS_DATA: |
| *val = zopt2201_gain_als[data->gain].scale; |
| break; |
| case ZOPT2201_UVB_DATA: |
| *val = zopt2201_gain_uvb[data->gain].scale; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *val2 = 1000000; |
| *val2 *= (1 << (zopt2201_resolution[data->res].bits - 13)); |
| tmp = div_s64(*val * 1000000ULL, *val2); |
| *val = div_s64_rem(tmp, 1000000, val2); |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_INT_TIME: |
| *val = 0; |
| *val2 = zopt2201_resolution[data->res].us; |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int zopt2201_set_resolution(struct zopt2201_data *data, u8 res) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(data->client, ZOPT2201_LS_MEAS_RATE, |
| (res << ZOPT2201_MEAS_RES_SHIFT) | |
| data->rate); |
| if (ret < 0) |
| return ret; |
| |
| data->res = res; |
| |
| return 0; |
| } |
| |
| static int zopt2201_write_resolution(struct zopt2201_data *data, |
| int val, int val2) |
| { |
| int i, ret; |
| |
| if (val != 0) |
| return -EINVAL; |
| |
| for (i = 0; i < ARRAY_SIZE(zopt2201_resolution); i++) |
| if (val2 == zopt2201_resolution[i].us) { |
| mutex_lock(&data->lock); |
| ret = zopt2201_set_resolution(data, i); |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int zopt2201_set_gain(struct zopt2201_data *data, u8 gain) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(data->client, ZOPT2201_LS_GAIN, gain); |
| if (ret < 0) |
| return ret; |
| |
| data->gain = gain; |
| |
| return 0; |
| } |
| |
| static int zopt2201_write_scale_als_by_idx(struct zopt2201_data *data, int idx) |
| { |
| int ret; |
| |
| mutex_lock(&data->lock); |
| ret = zopt2201_set_resolution(data, zopt2201_scale_als[idx].res); |
| if (ret < 0) |
| goto unlock; |
| |
| ret = zopt2201_set_gain(data, zopt2201_scale_als[idx].gain); |
| |
| unlock: |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| static int zopt2201_write_scale_als(struct zopt2201_data *data, |
| int val, int val2) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(zopt2201_scale_als); i++) |
| if (val == zopt2201_scale_als[i].scale && |
| val2 == zopt2201_scale_als[i].uscale) { |
| return zopt2201_write_scale_als_by_idx(data, i); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int zopt2201_write_scale_uvb_by_idx(struct zopt2201_data *data, int idx) |
| { |
| int ret; |
| |
| mutex_lock(&data->lock); |
| ret = zopt2201_set_resolution(data, zopt2201_scale_als[idx].res); |
| if (ret < 0) |
| goto unlock; |
| |
| ret = zopt2201_set_gain(data, zopt2201_scale_als[idx].gain); |
| |
| unlock: |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| static int zopt2201_write_scale_uvb(struct zopt2201_data *data, |
| int val, int val2) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(zopt2201_scale_uvb); i++) |
| if (val == zopt2201_scale_uvb[i].scale && |
| val2 == zopt2201_scale_uvb[i].uscale) |
| return zopt2201_write_scale_uvb_by_idx(data, i); |
| |
| return -EINVAL; |
| } |
| |
| static int zopt2201_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct zopt2201_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_INT_TIME: |
| return zopt2201_write_resolution(data, val, val2); |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->address) { |
| case ZOPT2201_ALS_DATA: |
| return zopt2201_write_scale_als(data, val, val2); |
| case ZOPT2201_UVB_DATA: |
| return zopt2201_write_scale_uvb(data, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static ssize_t zopt2201_show_int_time_available(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| size_t len = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(zopt2201_resolution); i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06lu ", |
| zopt2201_resolution[i].us); |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static IIO_DEV_ATTR_INT_TIME_AVAIL(zopt2201_show_int_time_available); |
| |
| static ssize_t zopt2201_show_als_scale_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| ssize_t len = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(zopt2201_scale_als); i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ", |
| zopt2201_scale_als[i].scale, |
| zopt2201_scale_als[i].uscale); |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static ssize_t zopt2201_show_uvb_scale_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| ssize_t len = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(zopt2201_scale_uvb); i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ", |
| zopt2201_scale_uvb[i].scale, |
| zopt2201_scale_uvb[i].uscale); |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static IIO_DEVICE_ATTR(in_illuminance_scale_available, 0444, |
| zopt2201_show_als_scale_avail, NULL, 0); |
| static IIO_DEVICE_ATTR(in_intensity_uv_scale_available, 0444, |
| zopt2201_show_uvb_scale_avail, NULL, 0); |
| |
| static struct attribute *zopt2201_attributes[] = { |
| &iio_dev_attr_integration_time_available.dev_attr.attr, |
| &iio_dev_attr_in_illuminance_scale_available.dev_attr.attr, |
| &iio_dev_attr_in_intensity_uv_scale_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group zopt2201_attribute_group = { |
| .attrs = zopt2201_attributes, |
| }; |
| |
| static const struct iio_info zopt2201_info = { |
| .read_raw = zopt2201_read_raw, |
| .write_raw = zopt2201_write_raw, |
| .attrs = &zopt2201_attribute_group, |
| }; |
| |
| static int zopt2201_probe(struct i2c_client *client) |
| { |
| struct zopt2201_data *data; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_I2C_BLOCK)) |
| return -EOPNOTSUPP; |
| |
| ret = i2c_smbus_read_byte_data(client, ZOPT2201_PART_ID); |
| if (ret < 0) |
| return ret; |
| if (ret != ZOPT2201_PART_NUMBER) |
| return -ENODEV; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| mutex_init(&data->lock); |
| |
| indio_dev->info = &zopt2201_info; |
| indio_dev->channels = zopt2201_channels; |
| indio_dev->num_channels = ARRAY_SIZE(zopt2201_channels); |
| indio_dev->name = ZOPT2201_DRV_NAME; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| data->rate = ZOPT2201_MEAS_FREQ_100MS; |
| ret = zopt2201_set_resolution(data, ZOPT2201_MEAS_RES_18BIT); |
| if (ret < 0) |
| return ret; |
| |
| ret = zopt2201_set_gain(data, ZOPT2201_LS_GAIN_3); |
| if (ret < 0) |
| return ret; |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct i2c_device_id zopt2201_id[] = { |
| { "zopt2201" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, zopt2201_id); |
| |
| static struct i2c_driver zopt2201_driver = { |
| .driver = { |
| .name = ZOPT2201_DRV_NAME, |
| }, |
| .probe = zopt2201_probe, |
| .id_table = zopt2201_id, |
| }; |
| |
| module_i2c_driver(zopt2201_driver); |
| |
| MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>"); |
| MODULE_DESCRIPTION("IDT ZOPT2201 ambient light and UV B sensor driver"); |
| MODULE_LICENSE("GPL"); |