| # |
| # Makefile for the linux kernel. |
| # |
| |
| ifdef CONFIG_DYNAMIC_FTRACE |
| CFLAGS_REMOVE_ftrace.o = -pg |
| endif |
| |
| extra-y := head.o init_task.o vmlinux.lds |
| |
| obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \ |
| irq_lsapic.o ivt.o machvec.o pal.o paravirt_patchlist.o patch.o process.o perfmon.o ptrace.o sal.o \ |
| salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \ |
| unwind.o mca.o mca_asm.o topology.o dma-mapping.o |
| |
| obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o |
| obj-$(CONFIG_IA64_GENERIC) += acpi-ext.o |
| obj-$(CONFIG_IA64_HP_ZX1) += acpi-ext.o |
| obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o |
| |
| obj-$(CONFIG_IA64_PALINFO) += palinfo.o |
| obj-$(CONFIG_IOSAPIC) += iosapic.o |
| obj-$(CONFIG_MODULES) += module.o |
| obj-$(CONFIG_SMP) += smp.o smpboot.o |
| obj-$(CONFIG_NUMA) += numa.o |
| obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o |
| obj-$(CONFIG_IA64_CYCLONE) += cyclone.o |
| obj-$(CONFIG_CPU_FREQ) += cpufreq/ |
| obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o |
| obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o |
| obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o |
| obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o |
| obj-$(CONFIG_CRASH_DUMP) += crash_dump.o |
| obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR) += uncached.o |
| obj-$(CONFIG_AUDIT) += audit.o |
| obj-$(CONFIG_PCI_MSI) += msi_ia64.o |
| mca_recovery-y += mca_drv.o mca_drv_asm.o |
| obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o |
| |
| obj-$(CONFIG_PARAVIRT) += paravirt.o paravirtentry.o \ |
| paravirt_patch.o |
| |
| obj-$(CONFIG_IA64_ESI) += esi.o |
| ifneq ($(CONFIG_IA64_ESI),) |
| obj-y += esi_stub.o # must be in kernel proper |
| endif |
| obj-$(CONFIG_DMAR) += pci-dma.o |
| obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o |
| |
| # fp_emulate() expects f2-f5,f16-f31 to contain the user-level state. |
| CFLAGS_traps.o += -mfixed-range=f2-f5,f16-f31 |
| |
| # The gate DSO image is built using a special linker script. |
| include $(srctree)/arch/ia64/kernel/Makefile.gate |
| # tell compiled for native |
| CPPFLAGS_gate.lds += -D__IA64_GATE_PARAVIRTUALIZED_NATIVE |
| |
| # Calculate NR_IRQ = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, ...) based on config |
| define sed-y |
| "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}" |
| endef |
| quiet_cmd_nr_irqs = GEN $@ |
| define cmd_nr_irqs |
| (set -e; \ |
| echo "#ifndef __ASM_NR_IRQS_H__"; \ |
| echo "#define __ASM_NR_IRQS_H__"; \ |
| echo "/*"; \ |
| echo " * DO NOT MODIFY."; \ |
| echo " *"; \ |
| echo " * This file was generated by Kbuild"; \ |
| echo " *"; \ |
| echo " */"; \ |
| echo ""; \ |
| sed -ne $(sed-y) $<; \ |
| echo ""; \ |
| echo "#endif" ) > $@ |
| endef |
| |
| # We use internal kbuild rules to avoid the "is up to date" message from make |
| arch/$(SRCARCH)/kernel/nr-irqs.s: arch/$(SRCARCH)/kernel/nr-irqs.c |
| $(Q)mkdir -p $(dir $@) |
| $(call if_changed_dep,cc_s_c) |
| |
| include/generated/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s |
| $(Q)mkdir -p $(dir $@) |
| $(call cmd,nr_irqs) |
| |
| # |
| # native ivt.S, entry.S and fsys.S |
| # |
| ASM_PARAVIRT_OBJS = ivt.o entry.o fsys.o |
| define paravirtualized_native |
| AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE |
| AFLAGS_pvchk-sed-$(1) += -D__IA64_ASM_PARAVIRTUALIZED_PVCHECK |
| extra-y += pvchk-$(1) |
| endef |
| $(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj)))) |
| |
| # |
| # Checker for paravirtualizations of privileged operations. |
| # |
| quiet_cmd_pv_check_sed = PVCHK $@ |
| define cmd_pv_check_sed |
| sed -f $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed $< > $@ |
| endef |
| |
| $(obj)/pvchk-sed-%.s: $(src)/%.S $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed FORCE |
| $(call if_changed_dep,as_s_S) |
| $(obj)/pvchk-%.s: $(obj)/pvchk-sed-%.s FORCE |
| $(call if_changed,pv_check_sed) |
| $(obj)/pvchk-%.o: $(obj)/pvchk-%.s FORCE |
| $(call if_changed,as_o_S) |
| .PRECIOUS: $(obj)/pvchk-sed-%.s $(obj)/pvchk-%.s $(obj)/pvchk-%.o |