drivers/usb/c67x00/c67x00.h - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * c67x00.h: Cypress C67X00 USB register and field definitions
  *
  * Copyright (C) 2006-2008 Barco N.V.
  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
  *    based on multiple host controller drivers inside the linux kernel.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA  02110-1301  USA.
  */

 #ifndef _USB_C67X00_H
 #define _USB_C67X00_H

 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/completion.h>
 #include <linux/mutex.h>

 /* ---------------------------------------------------------------------
  * Cypress C67x00 register definitions
  */

 /* Hardware Revision Register */
 #define HW_REV_REG		0xC004

 /* General USB registers */
 /* ===================== */

 /* USB Control Register */
 #define USB_CTL_REG(x)		((x) ? 0xC0AA : 0xC08A)

 #define LOW_SPEED_PORT(x)	((x) ? 0x0800 : 0x0400)
 #define HOST_MODE		0x0200
 #define PORT_RES_EN(x)		((x) ? 0x0100 : 0x0080)
 #define SOF_EOP_EN(x)		((x) ? 0x0002 : 0x0001)

 /* USB status register - Notice it has different content in hcd/udc mode */
 #define USB_STAT_REG(x)		((x) ? 0xC0B0 : 0xC090)

 #define EP0_IRQ_FLG		0x0001
 #define EP1_IRQ_FLG		0x0002
 #define EP2_IRQ_FLG		0x0004
 #define EP3_IRQ_FLG		0x0008
 #define EP4_IRQ_FLG		0x0010
 #define EP5_IRQ_FLG		0x0020
 #define EP6_IRQ_FLG		0x0040
 #define EP7_IRQ_FLG		0x0080
 #define RESET_IRQ_FLG		0x0100
 #define SOF_EOP_IRQ_FLG		0x0200
 #define ID_IRQ_FLG		0x4000
 #define VBUS_IRQ_FLG		0x8000

 /* USB Host only registers */
 /* ======================= */

 /* Host n Control Register */
 #define HOST_CTL_REG(x)		((x) ? 0xC0A0 : 0xC080)

 #define PREAMBLE_EN		0x0080	/* Preamble enable */
 #define SEQ_SEL			0x0040	/* Data Toggle Sequence Bit Select */
 #define ISO_EN			0x0010	/* Isochronous enable  */
 #define ARM_EN			0x0001	/* Arm operation */

 /* Host n Interrupt Enable Register */
 #define HOST_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)

 #define SOF_EOP_IRQ_EN		0x0200	/* SOF/EOP Interrupt Enable  */
 #define SOF_EOP_TMOUT_IRQ_EN	0x0800	/* SOF/EOP Timeout Interrupt Enable  */
 #define ID_IRQ_EN		0x4000	/* ID interrupt enable */
 #define VBUS_IRQ_EN		0x8000	/* VBUS interrupt enable */
 #define DONE_IRQ_EN		0x0001	/* Done Interrupt Enable  */

 /* USB status register */
 #define HOST_STAT_MASK		0x02FD
 #define PORT_CONNECT_CHANGE(x)	((x) ? 0x0020 : 0x0010)
 #define PORT_SE0_STATUS(x)	((x) ? 0x0008 : 0x0004)

 /* Host Frame Register */
 #define HOST_FRAME_REG(x)	((x) ? 0xC0B6 : 0xC096)

 #define HOST_FRAME_MASK		0x07FF

 /* USB Peripheral only registers */
 /* ============================= */

 /* Device n Port Sel reg */
 #define DEVICE_N_PORT_SEL(x)	((x) ? 0xC0A4 : 0xC084)

 /* Device n Interrupt Enable Register */
 #define DEVICE_N_IRQ_EN_REG(x)	((x) ? 0xC0AC : 0xC08C)

 #define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep)	((dev)  		\
 						 ? (0x0280 + (ep << 4)) \
 						 : (0x0200 + (ep << 4)))
 #define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep)	((dev)			\
 						 ? (0x0286 + (ep << 4)) \
 						 : (0x0206 + (ep << 4)))

 #define DEVICE_N_ADDRESS(dev)	((dev) ? (0xC0AE) : (0xC08E))

 /* HPI registers */
 /* ============= */

 /* HPI Status register */
 #define SOFEOP_FLG(x)		(1 << ((x) ? 12 : 10))
 #define SIEMSG_FLG(x)		(1 << (4 + (x)))
 #define RESET_FLG(x)		((x) ? 0x0200 : 0x0002)
 #define DONE_FLG(x)		(1 << (2 + (x)))
 #define RESUME_FLG(x)		(1 << (6 + (x)))
 #define MBX_OUT_FLG		0x0001	/* Message out available */
 #define MBX_IN_FLG		0x0100
 #define ID_FLG			0x4000
 #define VBUS_FLG		0x8000

 /* Interrupt routing register */
 #define HPI_IRQ_ROUTING_REG	0x0142

 #define HPI_SWAP_ENABLE(x)	((x) ? 0x0100 : 0x0001)
 #define RESET_TO_HPI_ENABLE(x)	((x) ? 0x0200 : 0x0002)
 #define DONE_TO_HPI_ENABLE(x)	((x) ? 0x0008 : 0x0004)
 #define RESUME_TO_HPI_ENABLE(x)	((x) ? 0x0080 : 0x0040)
 #define SOFEOP_TO_HPI_EN(x)	((x) ? 0x2000 : 0x0800)
 #define SOFEOP_TO_CPU_EN(x)	((x) ? 0x1000 : 0x0400)
 #define ID_TO_HPI_ENABLE	0x4000
 #define VBUS_TO_HPI_ENABLE	0x8000

 /* SIE msg registers */
 #define SIEMSG_REG(x)		((x) ? 0x0148 : 0x0144)

 #define HUSB_TDListDone		0x1000

 #define SUSB_EP0_MSG		0x0001
 #define SUSB_EP1_MSG		0x0002
 #define SUSB_EP2_MSG		0x0004
 #define SUSB_EP3_MSG		0x0008
 #define SUSB_EP4_MSG		0x0010
 #define SUSB_EP5_MSG		0x0020
 #define SUSB_EP6_MSG		0x0040
 #define SUSB_EP7_MSG		0x0080
 #define SUSB_RST_MSG		0x0100
 #define SUSB_SOF_MSG		0x0200
 #define SUSB_CFG_MSG		0x0400
 #define SUSB_SUS_MSG		0x0800
 #define SUSB_ID_MSG	       	0x4000
 #define SUSB_VBUS_MSG		0x8000

 /* BIOS interrupt routines */

 #define SUSBx_RECEIVE_INT(x)	((x) ? 97 : 81)
 #define SUSBx_SEND_INT(x)	((x) ? 96 : 80)

 #define SUSBx_DEV_DESC_VEC(x)	((x) ? 0x00D4 : 0x00B4)
 #define SUSBx_CONF_DESC_VEC(x)	((x) ? 0x00D6 : 0x00B6)
 #define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)

 #define CY_HCD_BUF_ADDR		0x500	/* Base address for host */
 #define SIE_TD_SIZE		0x200	/* size of the td list */
 #define SIE_TD_BUF_SIZE		0x400	/* size of the data buffer */

 #define SIE_TD_OFFSET(host)	((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
 #define SIE_BUF_OFFSET(host)	(SIE_TD_OFFSET(host) + SIE_TD_SIZE)

 /* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
 #define CY_UDC_REQ_HEADER_BASE	0x1100
 /* 8- byte request headers for IN/OUT transfers */
 #define CY_UDC_REQ_HEADER_SIZE	8

 #define CY_UDC_REQ_HEADER_ADDR(ep_num)	(CY_UDC_REQ_HEADER_BASE + \
 					 ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
 #define CY_UDC_DESC_BASE_ADDRESS	(CY_UDC_REQ_HEADER_ADDR(8))

 #define CY_UDC_BIOS_REPLACE_BASE	0x1800
 #define CY_UDC_REQ_BUFFER_BASE		0x2000
 #define CY_UDC_REQ_BUFFER_SIZE		0x0400
 #define CY_UDC_REQ_BUFFER_ADDR(ep_num)	(CY_UDC_REQ_BUFFER_BASE + \
 					 ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))

 /* ---------------------------------------------------------------------
  * Driver data structures
  */

 struct c67x00_device;

 /**
  * struct c67x00_sie - Common data associated with a SIE
  * @lock: lock to protect this struct and the associated chip registers
  * @private_data: subdriver dependent data
  * @irq: subdriver dependent irq handler, set NULL when not used
  * @dev: link to common driver structure
  * @sie_num: SIE number on chip, starting from 0
  * @mode: SIE mode (host/peripheral/otg/not used)
  */
 struct c67x00_sie {
 	/* Entries to be used by the subdrivers */
 	spinlock_t lock;	/* protect this structure */
 	void *private_data;
 	void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);

 	/* Read only: */
 	struct c67x00_device *dev;
 	int sie_num;
 	int mode;
 };

 #define sie_dev(s)	(&(s)->dev->pdev->dev)

 /**
  * struct c67x00_lcp
  */
 struct c67x00_lcp {
 	/* Internal use only */
 	struct mutex mutex;
 	struct completion msg_received;
 	u16 last_msg;
 };

 /*
  * struct c67x00_hpi
  */
 struct c67x00_hpi {
 	void __iomem *base;
 	int regstep;
 	spinlock_t lock;
 	struct c67x00_lcp lcp;
 };

 #define C67X00_SIES	2
 #define C67X00_PORTS	2

 /**
  * struct c67x00_device - Common data associated with a c67x00 instance
  * @hpi: hpi addresses
  * @sie: array of sie's on this chip
  * @pdev: platform device of instance
  * @pdata: configuration provided by the platform
  */
 struct c67x00_device {
 	struct c67x00_hpi hpi;
 	struct c67x00_sie sie[C67X00_SIES];
 	struct platform_device *pdev;
 	struct c67x00_platform_data *pdata;
 };

 /* ---------------------------------------------------------------------
  * Low level interface functions
  */

 /* Host Port Interface (HPI) functions */
 u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
 void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
 void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
 void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);

 /* General functions */
 u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
 u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
 void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
 u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
 void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
 			      void *data, int len);
 void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
 			     void *data, int len);

 /* Host specific functions */
 void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
 void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
 void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
 u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
 u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
 void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
 void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);

 /* Called by c67x00_irq to handle lcp interrupts */
 void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);

 /* Setup and teardown */
 void c67x00_ll_init(struct c67x00_device *dev);
 void c67x00_ll_release(struct c67x00_device *dev);
 int c67x00_ll_reset(struct c67x00_device *dev);

 #endif				/* _USB_C67X00_H */
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* c67x00.h: Cypress C67X00 USB register and field definitions
	*
	* Copyright (C) 2006-2008 Barco N.V.
	* Derived from the Cypress cy7c67200/300 ezusb linux driver and
	* based on multiple host controller drivers inside the linux kernel.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	* MA 02110-1301 USA.
	*/

	#ifndef _USB_C67X00_H
	#define _USB_C67X00_H

	#include <linux/spinlock.h>
	#include <linux/platform_device.h>
	#include <linux/completion.h>
	#include <linux/mutex.h>

	/* ---------------------------------------------------------------------
	* Cypress C67x00 register definitions
	*/

	/* Hardware Revision Register */
	#define HW_REV_REG 0xC004

	/* General USB registers */
	/* ===================== */

	/* USB Control Register */
	#define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A)

	#define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400)
	#define HOST_MODE 0x0200
	#define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080)
	#define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001)

	/* USB status register - Notice it has different content in hcd/udc mode */
	#define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090)

	#define EP0_IRQ_FLG 0x0001
	#define EP1_IRQ_FLG 0x0002
	#define EP2_IRQ_FLG 0x0004
	#define EP3_IRQ_FLG 0x0008
	#define EP4_IRQ_FLG 0x0010
	#define EP5_IRQ_FLG 0x0020
	#define EP6_IRQ_FLG 0x0040
	#define EP7_IRQ_FLG 0x0080
	#define RESET_IRQ_FLG 0x0100
	#define SOF_EOP_IRQ_FLG 0x0200
	#define ID_IRQ_FLG 0x4000
	#define VBUS_IRQ_FLG 0x8000

	/* USB Host only registers */
	/* ======================= */

	/* Host n Control Register */
	#define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080)

	#define PREAMBLE_EN 0x0080 /* Preamble enable */
	#define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */
	#define ISO_EN 0x0010 /* Isochronous enable */
	#define ARM_EN 0x0001 /* Arm operation */

	/* Host n Interrupt Enable Register */
	#define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)

	#define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */
	#define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */
	#define ID_IRQ_EN 0x4000 /* ID interrupt enable */
	#define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */
	#define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */

	/* USB status register */
	#define HOST_STAT_MASK 0x02FD
	#define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
	#define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004)

	/* Host Frame Register */
	#define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096)

	#define HOST_FRAME_MASK 0x07FF

	/* USB Peripheral only registers */
	/* ============================= */

	/* Device n Port Sel reg */
	#define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084)

	/* Device n Interrupt Enable Register */
	#define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)

	#define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \
	? (0x0280 + (ep << 4)) \
	: (0x0200 + (ep << 4)))
	#define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \
	? (0x0286 + (ep << 4)) \
	: (0x0206 + (ep << 4)))

	#define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E))

	/* HPI registers */
	/* ============= */

	/* HPI Status register */
	#define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10))
	#define SIEMSG_FLG(x) (1 << (4 + (x)))
	#define RESET_FLG(x) ((x) ? 0x0200 : 0x0002)
	#define DONE_FLG(x) (1 << (2 + (x)))
	#define RESUME_FLG(x) (1 << (6 + (x)))
	#define MBX_OUT_FLG 0x0001 /* Message out available */
	#define MBX_IN_FLG 0x0100
	#define ID_FLG 0x4000
	#define VBUS_FLG 0x8000

	/* Interrupt routing register */
	#define HPI_IRQ_ROUTING_REG 0x0142

	#define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001)
	#define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
	#define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004)
	#define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
	#define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800)
	#define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400)
	#define ID_TO_HPI_ENABLE 0x4000
	#define VBUS_TO_HPI_ENABLE 0x8000

	/* SIE msg registers */
	#define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144)

	#define HUSB_TDListDone 0x1000

	#define SUSB_EP0_MSG 0x0001
	#define SUSB_EP1_MSG 0x0002
	#define SUSB_EP2_MSG 0x0004
	#define SUSB_EP3_MSG 0x0008
	#define SUSB_EP4_MSG 0x0010
	#define SUSB_EP5_MSG 0x0020
	#define SUSB_EP6_MSG 0x0040
	#define SUSB_EP7_MSG 0x0080
	#define SUSB_RST_MSG 0x0100
	#define SUSB_SOF_MSG 0x0200
	#define SUSB_CFG_MSG 0x0400
	#define SUSB_SUS_MSG 0x0800
	#define SUSB_ID_MSG 0x4000
	#define SUSB_VBUS_MSG 0x8000

	/* BIOS interrupt routines */

	#define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81)
	#define SUSBx_SEND_INT(x) ((x) ? 96 : 80)

	#define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4)
	#define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
	#define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)

	#define CY_HCD_BUF_ADDR 0x500 /* Base address for host */
	#define SIE_TD_SIZE 0x200 /* size of the td list */
	#define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */

	#define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
	#define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE)

	/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
	#define CY_UDC_REQ_HEADER_BASE 0x1100
	/* 8- byte request headers for IN/OUT transfers */
	#define CY_UDC_REQ_HEADER_SIZE 8

	#define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
	((ep_num) * CY_UDC_REQ_HEADER_SIZE))
	#define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8))

	#define CY_UDC_BIOS_REPLACE_BASE 0x1800
	#define CY_UDC_REQ_BUFFER_BASE 0x2000
	#define CY_UDC_REQ_BUFFER_SIZE 0x0400
	#define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
	((ep_num) * CY_UDC_REQ_BUFFER_SIZE))

	/* ---------------------------------------------------------------------
	* Driver data structures
	*/

	struct c67x00_device;

	/**
	* struct c67x00_sie - Common data associated with a SIE
	* @lock: lock to protect this struct and the associated chip registers
	* @private_data: subdriver dependent data
	* @irq: subdriver dependent irq handler, set NULL when not used
	* @dev: link to common driver structure
	* @sie_num: SIE number on chip, starting from 0
	* @mode: SIE mode (host/peripheral/otg/not used)
	*/
	struct c67x00_sie {
	/* Entries to be used by the subdrivers */
	spinlock_t lock; /* protect this structure */
	void *private_data;
	void (irq) (struct c67x00_sie sie, u16 int_status, u16 msg);

	/* Read only: */
	struct c67x00_device *dev;
	int sie_num;
	int mode;
	};

	#define sie_dev(s) (&(s)->dev->pdev->dev)

	/**
	* struct c67x00_lcp
	*/
	struct c67x00_lcp {
	/* Internal use only */
	struct mutex mutex;
	struct completion msg_received;
	u16 last_msg;
	};

	/*
	* struct c67x00_hpi
	*/
	struct c67x00_hpi {
	void __iomem *base;
	int regstep;
	spinlock_t lock;
	struct c67x00_lcp lcp;
	};

	#define C67X00_SIES 2
	#define C67X00_PORTS 2

	/**
	* struct c67x00_device - Common data associated with a c67x00 instance
	* @hpi: hpi addresses
	* @sie: array of sie's on this chip
	* @pdev: platform device of instance
	* @pdata: configuration provided by the platform
	*/
	struct c67x00_device {
	struct c67x00_hpi hpi;
	struct c67x00_sie sie[C67X00_SIES];
	struct platform_device *pdev;
	struct c67x00_platform_data *pdata;
	};

	/* ---------------------------------------------------------------------
	* Low level interface functions
	*/

	/* Host Port Interface (HPI) functions */
	u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
	void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
	void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
	void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);

	/* General functions */
	u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
	u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
	void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
	u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
	void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
	void *data, int len);
	void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
	void *data, int len);

	/* Host specific functions */
	void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
	void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
	void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
	u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
	u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
	void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
	void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);

	/* Called by c67x00_irq to handle lcp interrupts */
	void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);

	/* Setup and teardown */
	void c67x00_ll_init(struct c67x00_device *dev);
	void c67x00_ll_release(struct c67x00_device *dev);
	int c67x00_ll_reset(struct c67x00_device *dev);

	#endif /* _USB_C67X00_H */