| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * snps_udc_plat.c - Synopsys UDC Platform Driver |
| * |
| * Copyright (C) 2016 Broadcom |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/extcon.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy/phy.h> |
| #include <linux/module.h> |
| #include <linux/dmapool.h> |
| #include <linux/interrupt.h> |
| #include <linux/moduleparam.h> |
| #include "amd5536udc.h" |
| |
| /* description */ |
| #define UDC_MOD_DESCRIPTION "Synopsys UDC platform driver" |
| |
| static void start_udc(struct udc *udc) |
| { |
| if (udc->driver) { |
| dev_info(udc->dev, "Connecting...\n"); |
| udc_enable_dev_setup_interrupts(udc); |
| udc_basic_init(udc); |
| udc->connected = 1; |
| } |
| } |
| |
| static void stop_udc(struct udc *udc) |
| { |
| int tmp; |
| u32 reg; |
| |
| spin_lock(&udc->lock); |
| |
| /* Flush the receieve fifo */ |
| reg = readl(&udc->regs->ctl); |
| reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH); |
| writel(reg, &udc->regs->ctl); |
| |
| reg = readl(&udc->regs->ctl); |
| reg &= ~(AMD_BIT(UDC_DEVCTL_SRX_FLUSH)); |
| writel(reg, &udc->regs->ctl); |
| dev_dbg(udc->dev, "ep rx queue flushed\n"); |
| |
| /* Mask interrupts. Required more so when the |
| * UDC is connected to a DRD phy. |
| */ |
| udc_mask_unused_interrupts(udc); |
| |
| /* Disconnect gadget driver */ |
| if (udc->driver) { |
| spin_unlock(&udc->lock); |
| udc->driver->disconnect(&udc->gadget); |
| spin_lock(&udc->lock); |
| |
| /* empty queues */ |
| for (tmp = 0; tmp < UDC_EP_NUM; tmp++) |
| empty_req_queue(&udc->ep[tmp]); |
| } |
| udc->connected = 0; |
| |
| spin_unlock(&udc->lock); |
| dev_info(udc->dev, "Device disconnected\n"); |
| } |
| |
| static void udc_drd_work(struct work_struct *work) |
| { |
| struct udc *udc; |
| |
| udc = container_of(to_delayed_work(work), |
| struct udc, drd_work); |
| |
| if (udc->conn_type) { |
| dev_dbg(udc->dev, "idle -> device\n"); |
| start_udc(udc); |
| } else { |
| dev_dbg(udc->dev, "device -> idle\n"); |
| stop_udc(udc); |
| } |
| } |
| |
| static int usbd_connect_notify(struct notifier_block *self, |
| unsigned long event, void *ptr) |
| { |
| struct udc *udc = container_of(self, struct udc, nb); |
| |
| dev_dbg(udc->dev, "%s: event: %lu\n", __func__, event); |
| |
| udc->conn_type = event; |
| |
| schedule_delayed_work(&udc->drd_work, 0); |
| |
| return NOTIFY_OK; |
| } |
| |
| static int udc_plat_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct udc *udc; |
| int ret; |
| |
| udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL); |
| if (!udc) |
| return -ENOMEM; |
| |
| spin_lock_init(&udc->lock); |
| udc->dev = dev; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| udc->virt_addr = devm_ioremap_resource(dev, res); |
| if (IS_ERR(udc->regs)) |
| return PTR_ERR(udc->regs); |
| |
| /* udc csr registers base */ |
| udc->csr = udc->virt_addr + UDC_CSR_ADDR; |
| |
| /* dev registers base */ |
| udc->regs = udc->virt_addr + UDC_DEVCFG_ADDR; |
| |
| /* ep registers base */ |
| udc->ep_regs = udc->virt_addr + UDC_EPREGS_ADDR; |
| |
| /* fifo's base */ |
| udc->rxfifo = (u32 __iomem *)(udc->virt_addr + UDC_RXFIFO_ADDR); |
| udc->txfifo = (u32 __iomem *)(udc->virt_addr + UDC_TXFIFO_ADDR); |
| |
| udc->phys_addr = (unsigned long)res->start; |
| |
| udc->irq = irq_of_parse_and_map(dev->of_node, 0); |
| if (udc->irq <= 0) { |
| dev_err(dev, "Can't parse and map interrupt\n"); |
| return -EINVAL; |
| } |
| |
| udc->udc_phy = devm_of_phy_get_by_index(dev, dev->of_node, 0); |
| if (IS_ERR(udc->udc_phy)) { |
| dev_err(dev, "Failed to obtain phy from device tree\n"); |
| return PTR_ERR(udc->udc_phy); |
| } |
| |
| ret = phy_init(udc->udc_phy); |
| if (ret) { |
| dev_err(dev, "UDC phy init failed"); |
| return ret; |
| } |
| |
| ret = phy_power_on(udc->udc_phy); |
| if (ret) { |
| dev_err(dev, "UDC phy power on failed"); |
| phy_exit(udc->udc_phy); |
| return ret; |
| } |
| |
| /* Register for extcon if supported */ |
| if (of_get_property(dev->of_node, "extcon", NULL)) { |
| udc->edev = extcon_get_edev_by_phandle(dev, 0); |
| if (IS_ERR(udc->edev)) { |
| if (PTR_ERR(udc->edev) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_err(dev, "Invalid or missing extcon\n"); |
| ret = PTR_ERR(udc->edev); |
| goto exit_phy; |
| } |
| |
| udc->nb.notifier_call = usbd_connect_notify; |
| ret = extcon_register_notifier(udc->edev, EXTCON_USB, |
| &udc->nb); |
| if (ret < 0) { |
| dev_err(dev, "Can't register extcon device\n"); |
| goto exit_phy; |
| } |
| |
| ret = extcon_get_state(udc->edev, EXTCON_USB); |
| if (ret < 0) { |
| dev_err(dev, "Can't get cable state\n"); |
| goto exit_extcon; |
| } else if (ret) { |
| udc->conn_type = ret; |
| } |
| INIT_DELAYED_WORK(&udc->drd_work, udc_drd_work); |
| } |
| |
| /* init dma pools */ |
| if (use_dma) { |
| ret = init_dma_pools(udc); |
| if (ret != 0) |
| goto exit_extcon; |
| } |
| |
| ret = devm_request_irq(dev, udc->irq, udc_irq, IRQF_SHARED, |
| "snps-udc", udc); |
| if (ret < 0) { |
| dev_err(dev, "Request irq %d failed for UDC\n", udc->irq); |
| goto exit_dma; |
| } |
| |
| platform_set_drvdata(pdev, udc); |
| udc->chiprev = UDC_BCM_REV; |
| |
| if (udc_probe(udc)) { |
| ret = -ENODEV; |
| goto exit_dma; |
| } |
| dev_info(dev, "Synopsys UDC platform driver probe successful\n"); |
| |
| return 0; |
| |
| exit_dma: |
| if (use_dma) |
| free_dma_pools(udc); |
| exit_extcon: |
| if (udc->edev) |
| extcon_unregister_notifier(udc->edev, EXTCON_USB, &udc->nb); |
| exit_phy: |
| if (udc->udc_phy) { |
| phy_power_off(udc->udc_phy); |
| phy_exit(udc->udc_phy); |
| } |
| return ret; |
| } |
| |
| static int udc_plat_remove(struct platform_device *pdev) |
| { |
| struct udc *dev; |
| |
| dev = platform_get_drvdata(pdev); |
| |
| usb_del_gadget_udc(&dev->gadget); |
| /* gadget driver must not be registered */ |
| if (WARN_ON(dev->driver)) |
| return 0; |
| |
| /* dma pool cleanup */ |
| free_dma_pools(dev); |
| |
| udc_remove(dev); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| if (dev->drd_wq) { |
| flush_workqueue(dev->drd_wq); |
| destroy_workqueue(dev->drd_wq); |
| } |
| |
| phy_power_off(dev->udc_phy); |
| phy_exit(dev->udc_phy); |
| extcon_unregister_notifier(dev->edev, EXTCON_USB, &dev->nb); |
| |
| dev_info(&pdev->dev, "Synopsys UDC platform driver removed\n"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int udc_plat_suspend(struct device *dev) |
| { |
| struct udc *udc; |
| |
| udc = dev_get_drvdata(dev); |
| stop_udc(udc); |
| |
| if (extcon_get_state(udc->edev, EXTCON_USB) > 0) { |
| dev_dbg(udc->dev, "device -> idle\n"); |
| stop_udc(udc); |
| } |
| phy_power_off(udc->udc_phy); |
| phy_exit(udc->udc_phy); |
| |
| return 0; |
| } |
| |
| static int udc_plat_resume(struct device *dev) |
| { |
| struct udc *udc; |
| int ret; |
| |
| udc = dev_get_drvdata(dev); |
| |
| ret = phy_init(udc->udc_phy); |
| if (ret) { |
| dev_err(udc->dev, "UDC phy init failure"); |
| return ret; |
| } |
| |
| ret = phy_power_on(udc->udc_phy); |
| if (ret) { |
| dev_err(udc->dev, "UDC phy power on failure"); |
| phy_exit(udc->udc_phy); |
| return ret; |
| } |
| |
| if (extcon_get_state(udc->edev, EXTCON_USB) > 0) { |
| dev_dbg(udc->dev, "idle -> device\n"); |
| start_udc(udc); |
| } |
| |
| return 0; |
| } |
| static const struct dev_pm_ops udc_plat_pm_ops = { |
| .suspend = udc_plat_suspend, |
| .resume = udc_plat_resume, |
| }; |
| #endif |
| |
| #if defined(CONFIG_OF) |
| static const struct of_device_id of_udc_match[] = { |
| { .compatible = "brcm,ns2-udc", }, |
| { .compatible = "brcm,cygnus-udc", }, |
| { .compatible = "brcm,iproc-udc", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, of_udc_match); |
| #endif |
| |
| static struct platform_driver udc_plat_driver = { |
| .probe = udc_plat_probe, |
| .remove = udc_plat_remove, |
| .driver = { |
| .name = "snps-udc-plat", |
| .of_match_table = of_match_ptr(of_udc_match), |
| #ifdef CONFIG_PM_SLEEP |
| .pm = &udc_plat_pm_ops, |
| #endif |
| }, |
| }; |
| module_platform_driver(udc_plat_driver); |
| |
| MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION); |
| MODULE_AUTHOR("Broadcom"); |
| MODULE_LICENSE("GPL v2"); |