| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ST OHCI driver |
| * |
| * Copyright (C) 2014 STMicroelectronics – All Rights Reserved |
| * |
| * Author: Peter Griffin <peter.griffin@linaro.org> |
| * |
| * Derived from ohci-platform.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/hrtimer.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/reset.h> |
| #include <linux/usb/ohci_pdriver.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| |
| #include "ohci.h" |
| |
| #define USB_MAX_CLKS 3 |
| |
| struct st_ohci_platform_priv { |
| struct clk *clks[USB_MAX_CLKS]; |
| struct clk *clk48; |
| struct reset_control *rst; |
| struct reset_control *pwr; |
| struct phy *phy; |
| }; |
| |
| #define DRIVER_DESC "OHCI STMicroelectronics driver" |
| |
| #define hcd_to_ohci_priv(h) \ |
| ((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv) |
| |
| static const char hcd_name[] = "ohci-st"; |
| |
| static int st_ohci_platform_power_on(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); |
| int clk, ret; |
| |
| ret = reset_control_deassert(priv->pwr); |
| if (ret) |
| return ret; |
| |
| ret = reset_control_deassert(priv->rst); |
| if (ret) |
| goto err_assert_power; |
| |
| /* some SoCs don't have a dedicated 48Mhz clock, but those that do |
| need the rate to be explicitly set */ |
| if (priv->clk48) { |
| ret = clk_set_rate(priv->clk48, 48000000); |
| if (ret) |
| goto err_assert_reset; |
| } |
| |
| for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) { |
| ret = clk_prepare_enable(priv->clks[clk]); |
| if (ret) |
| goto err_disable_clks; |
| } |
| |
| ret = phy_init(priv->phy); |
| if (ret) |
| goto err_disable_clks; |
| |
| ret = phy_power_on(priv->phy); |
| if (ret) |
| goto err_exit_phy; |
| |
| return 0; |
| |
| err_exit_phy: |
| phy_exit(priv->phy); |
| err_disable_clks: |
| while (--clk >= 0) |
| clk_disable_unprepare(priv->clks[clk]); |
| err_assert_reset: |
| reset_control_assert(priv->rst); |
| err_assert_power: |
| reset_control_assert(priv->pwr); |
| |
| return ret; |
| } |
| |
| static void st_ohci_platform_power_off(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); |
| |
| int clk; |
| |
| reset_control_assert(priv->pwr); |
| |
| reset_control_assert(priv->rst); |
| |
| phy_power_off(priv->phy); |
| |
| phy_exit(priv->phy); |
| |
| for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--) |
| if (priv->clks[clk]) |
| clk_disable_unprepare(priv->clks[clk]); |
| } |
| |
| static struct hc_driver __read_mostly ohci_platform_hc_driver; |
| |
| static const struct ohci_driver_overrides platform_overrides __initconst = { |
| .product_desc = "ST OHCI controller", |
| .extra_priv_size = sizeof(struct st_ohci_platform_priv), |
| }; |
| |
| static struct usb_ohci_pdata ohci_platform_defaults = { |
| .power_on = st_ohci_platform_power_on, |
| .power_suspend = st_ohci_platform_power_off, |
| .power_off = st_ohci_platform_power_off, |
| }; |
| |
| static int st_ohci_platform_probe(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd; |
| struct resource *res_mem; |
| struct usb_ohci_pdata *pdata = &ohci_platform_defaults; |
| struct st_ohci_platform_priv *priv; |
| struct ohci_hcd *ohci; |
| int err, irq, clk = 0; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| irq = platform_get_irq(dev, 0); |
| if (irq < 0) { |
| dev_err(&dev->dev, "no irq provided"); |
| return irq; |
| } |
| |
| res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| if (!res_mem) { |
| dev_err(&dev->dev, "no memory resource provided"); |
| return -ENXIO; |
| } |
| |
| hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, |
| dev_name(&dev->dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| platform_set_drvdata(dev, hcd); |
| dev->dev.platform_data = pdata; |
| priv = hcd_to_ohci_priv(hcd); |
| ohci = hcd_to_ohci(hcd); |
| |
| priv->phy = devm_phy_get(&dev->dev, "usb"); |
| if (IS_ERR(priv->phy)) { |
| err = PTR_ERR(priv->phy); |
| goto err_put_hcd; |
| } |
| |
| for (clk = 0; clk < USB_MAX_CLKS; clk++) { |
| priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); |
| if (IS_ERR(priv->clks[clk])) { |
| err = PTR_ERR(priv->clks[clk]); |
| if (err == -EPROBE_DEFER) |
| goto err_put_clks; |
| priv->clks[clk] = NULL; |
| break; |
| } |
| } |
| |
| /* some SoCs don't have a dedicated 48Mhz clock, but those that |
| do need the rate to be explicitly set */ |
| priv->clk48 = devm_clk_get(&dev->dev, "clk48"); |
| if (IS_ERR(priv->clk48)) { |
| dev_info(&dev->dev, "48MHz clk not found\n"); |
| priv->clk48 = NULL; |
| } |
| |
| priv->pwr = |
| devm_reset_control_get_optional_shared(&dev->dev, "power"); |
| if (IS_ERR(priv->pwr)) { |
| err = PTR_ERR(priv->pwr); |
| goto err_put_clks; |
| } |
| |
| priv->rst = |
| devm_reset_control_get_optional_shared(&dev->dev, "softreset"); |
| if (IS_ERR(priv->rst)) { |
| err = PTR_ERR(priv->rst); |
| goto err_put_clks; |
| } |
| |
| if (pdata->power_on) { |
| err = pdata->power_on(dev); |
| if (err < 0) |
| goto err_power; |
| } |
| |
| hcd->rsrc_start = res_mem->start; |
| hcd->rsrc_len = resource_size(res_mem); |
| |
| hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); |
| if (IS_ERR(hcd->regs)) { |
| err = PTR_ERR(hcd->regs); |
| goto err_power; |
| } |
| err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (err) |
| goto err_power; |
| |
| device_wakeup_enable(hcd->self.controller); |
| |
| platform_set_drvdata(dev, hcd); |
| |
| return err; |
| |
| err_power: |
| if (pdata->power_off) |
| pdata->power_off(dev); |
| |
| err_put_clks: |
| while (--clk >= 0) |
| clk_put(priv->clks[clk]); |
| err_put_hcd: |
| if (pdata == &ohci_platform_defaults) |
| dev->dev.platform_data = NULL; |
| |
| usb_put_hcd(hcd); |
| |
| return err; |
| } |
| |
| static int st_ohci_platform_remove(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); |
| struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); |
| int clk; |
| |
| usb_remove_hcd(hcd); |
| |
| if (pdata->power_off) |
| pdata->power_off(dev); |
| |
| |
| for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) |
| clk_put(priv->clks[clk]); |
| |
| usb_put_hcd(hcd); |
| |
| if (pdata == &ohci_platform_defaults) |
| dev->dev.platform_data = NULL; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| static int st_ohci_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct usb_ohci_pdata *pdata = dev->platform_data; |
| struct platform_device *pdev = to_platform_device(dev); |
| bool do_wakeup = device_may_wakeup(dev); |
| int ret; |
| |
| ret = ohci_suspend(hcd, do_wakeup); |
| if (ret) |
| return ret; |
| |
| if (pdata->power_suspend) |
| pdata->power_suspend(pdev); |
| |
| return ret; |
| } |
| |
| static int st_ohci_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct usb_ohci_pdata *pdata = dev_get_platdata(dev); |
| struct platform_device *pdev = to_platform_device(dev); |
| int err; |
| |
| if (pdata->power_on) { |
| err = pdata->power_on(pdev); |
| if (err < 0) |
| return err; |
| } |
| |
| ohci_resume(hcd, false); |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(st_ohci_pm_ops, st_ohci_suspend, st_ohci_resume); |
| |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static const struct of_device_id st_ohci_platform_ids[] = { |
| { .compatible = "st,st-ohci-300x", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, st_ohci_platform_ids); |
| |
| static struct platform_driver ohci_platform_driver = { |
| .probe = st_ohci_platform_probe, |
| .remove = st_ohci_platform_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "st-ohci", |
| #ifdef CONFIG_PM_SLEEP |
| .pm = &st_ohci_pm_ops, |
| #endif |
| .of_match_table = st_ohci_platform_ids, |
| } |
| }; |
| |
| static int __init ohci_platform_init(void) |
| { |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| pr_info("%s: " DRIVER_DESC "\n", hcd_name); |
| |
| ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides); |
| return platform_driver_register(&ohci_platform_driver); |
| } |
| module_init(ohci_platform_init); |
| |
| static void __exit ohci_platform_cleanup(void) |
| { |
| platform_driver_unregister(&ohci_platform_driver); |
| } |
| module_exit(ohci_platform_cleanup); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); |
| MODULE_LICENSE("GPL"); |