| /* |
| * Copyright 2022 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| |
| #include "reg_helper.h" |
| |
| #include "core_types.h" |
| #include "link_encoder.h" |
| #include "dcn321_dio_link_encoder.h" |
| #include "dcn31/dcn31_dio_link_encoder.h" |
| #include "stream_encoder.h" |
| #include "dc_bios_types.h" |
| |
| #include "gpio_service_interface.h" |
| |
| #ifndef MIN |
| #define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) |
| #endif |
| |
| #define CTX \ |
| enc10->base.ctx |
| #define DC_LOGGER \ |
| enc10->base.ctx->logger |
| |
| #define REG(reg)\ |
| (enc10->link_regs->reg) |
| |
| #undef FN |
| #define FN(reg_name, field_name) \ |
| enc10->link_shift->field_name, enc10->link_mask->field_name |
| |
| #define AUX_REG(reg)\ |
| (enc10->aux_regs->reg) |
| |
| #define AUX_REG_READ(reg_name) \ |
| dm_read_reg(CTX, AUX_REG(reg_name)) |
| |
| #define AUX_REG_WRITE(reg_name, val) \ |
| dm_write_reg(CTX, AUX_REG(reg_name), val) |
| |
| static const struct link_encoder_funcs dcn321_link_enc_funcs = { |
| .read_state = link_enc2_read_state, |
| .validate_output_with_stream = |
| dcn30_link_encoder_validate_output_with_stream, |
| .hw_init = enc32_hw_init, |
| .setup = dcn10_link_encoder_setup, |
| .enable_tmds_output = dcn10_link_encoder_enable_tmds_output, |
| .enable_dp_output = dcn32_link_encoder_enable_dp_output, |
| .enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output, |
| .disable_output = dcn10_link_encoder_disable_output, |
| .dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings, |
| .dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern, |
| .update_mst_stream_allocation_table = |
| dcn10_link_encoder_update_mst_stream_allocation_table, |
| .psr_program_dp_dphy_fast_training = |
| dcn10_psr_program_dp_dphy_fast_training, |
| .psr_program_secondary_packet = dcn10_psr_program_secondary_packet, |
| .connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe, |
| .enable_hpd = dcn10_link_encoder_enable_hpd, |
| .disable_hpd = dcn10_link_encoder_disable_hpd, |
| .is_dig_enabled = dcn10_is_dig_enabled, |
| .destroy = dcn10_link_encoder_destroy, |
| .fec_set_enable = enc2_fec_set_enable, |
| .fec_set_ready = enc2_fec_set_ready, |
| .fec_is_active = enc2_fec_is_active, |
| .get_dig_frontend = dcn10_get_dig_frontend, |
| .get_dig_mode = dcn10_get_dig_mode, |
| .is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode, |
| .get_max_link_cap = dcn20_link_encoder_get_max_link_cap, |
| .set_dio_phy_mux = dcn31_link_encoder_set_dio_phy_mux, |
| }; |
| |
| void dcn321_link_encoder_construct( |
| struct dcn20_link_encoder *enc20, |
| const struct encoder_init_data *init_data, |
| const struct encoder_feature_support *enc_features, |
| const struct dcn10_link_enc_registers *link_regs, |
| const struct dcn10_link_enc_aux_registers *aux_regs, |
| const struct dcn10_link_enc_hpd_registers *hpd_regs, |
| const struct dcn10_link_enc_shift *link_shift, |
| const struct dcn10_link_enc_mask *link_mask) |
| { |
| struct bp_connector_speed_cap_info bp_cap_info = {0}; |
| const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs; |
| enum bp_result result = BP_RESULT_OK; |
| struct dcn10_link_encoder *enc10 = &enc20->enc10; |
| |
| enc10->base.funcs = &dcn321_link_enc_funcs; |
| enc10->base.ctx = init_data->ctx; |
| enc10->base.id = init_data->encoder; |
| |
| enc10->base.hpd_source = init_data->hpd_source; |
| enc10->base.connector = init_data->connector; |
| |
| if (enc10->base.connector.id == CONNECTOR_ID_USBC) |
| enc10->base.features.flags.bits.DP_IS_USB_C = 1; |
| |
| enc10->base.preferred_engine = ENGINE_ID_UNKNOWN; |
| |
| enc10->base.features = *enc_features; |
| |
| enc10->base.transmitter = init_data->transmitter; |
| |
| /* set the flag to indicate whether driver poll the I2C data pin |
| * while doing the DP sink detect |
| */ |
| |
| /* if (dal_adapter_service_is_feature_supported(as, |
| FEATURE_DP_SINK_DETECT_POLL_DATA_PIN)) |
| enc10->base.features.flags.bits. |
| DP_SINK_DETECT_POLL_DATA_PIN = true;*/ |
| |
| enc10->base.output_signals = |
| SIGNAL_TYPE_DVI_SINGLE_LINK | |
| SIGNAL_TYPE_DVI_DUAL_LINK | |
| SIGNAL_TYPE_LVDS | |
| SIGNAL_TYPE_DISPLAY_PORT | |
| SIGNAL_TYPE_DISPLAY_PORT_MST | |
| SIGNAL_TYPE_EDP | |
| SIGNAL_TYPE_HDMI_TYPE_A; |
| |
| enc10->link_regs = link_regs; |
| enc10->aux_regs = aux_regs; |
| enc10->hpd_regs = hpd_regs; |
| enc10->link_shift = link_shift; |
| enc10->link_mask = link_mask; |
| |
| switch (enc10->base.transmitter) { |
| case TRANSMITTER_UNIPHY_A: |
| enc10->base.preferred_engine = ENGINE_ID_DIGA; |
| break; |
| case TRANSMITTER_UNIPHY_B: |
| enc10->base.preferred_engine = ENGINE_ID_DIGB; |
| break; |
| case TRANSMITTER_UNIPHY_C: |
| enc10->base.preferred_engine = ENGINE_ID_DIGC; |
| break; |
| case TRANSMITTER_UNIPHY_D: |
| enc10->base.preferred_engine = ENGINE_ID_DIGD; |
| break; |
| case TRANSMITTER_UNIPHY_E: |
| enc10->base.preferred_engine = ENGINE_ID_DIGE; |
| break; |
| default: |
| ASSERT_CRITICAL(false); |
| enc10->base.preferred_engine = ENGINE_ID_UNKNOWN; |
| } |
| |
| /* default to one to mirror Windows behavior */ |
| enc10->base.features.flags.bits.HDMI_6GB_EN = 1; |
| |
| if (bp_funcs->get_connector_speed_cap_info) |
| result = bp_funcs->get_connector_speed_cap_info(enc10->base.ctx->dc_bios, |
| enc10->base.connector, &bp_cap_info); |
| |
| /* Override features with DCE-specific values */ |
| if (result == BP_RESULT_OK) { |
| enc10->base.features.flags.bits.IS_HBR2_CAPABLE = |
| bp_cap_info.DP_HBR2_EN; |
| enc10->base.features.flags.bits.IS_HBR3_CAPABLE = |
| bp_cap_info.DP_HBR3_EN; |
| enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN; |
| enc10->base.features.flags.bits.IS_DP2_CAPABLE = 1; |
| enc10->base.features.flags.bits.IS_UHBR10_CAPABLE = bp_cap_info.DP_UHBR10_EN; |
| enc10->base.features.flags.bits.IS_UHBR13_5_CAPABLE = bp_cap_info.DP_UHBR13_5_EN; |
| enc10->base.features.flags.bits.IS_UHBR20_CAPABLE = bp_cap_info.DP_UHBR20_EN; |
| } else { |
| DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n", |
| __func__, |
| result); |
| } |
| if (enc10->base.ctx->dc->debug.hdmi20_disable) { |
| enc10->base.features.flags.bits.HDMI_6GB_EN = 0; |
| } |
| } |