|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * EBI driver for Atmel chips | 
|  | * inspired by the fsl weim bus driver | 
|  | * | 
|  | * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/mfd/syscon.h> | 
|  | #include <linux/mfd/syscon/atmel-matrix.h> | 
|  | #include <linux/mfd/syscon/atmel-smc.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <soc/at91/atmel-sfr.h> | 
|  |  | 
|  | #define AT91_EBI_NUM_CS		8 | 
|  |  | 
|  | struct atmel_ebi_dev_config { | 
|  | int cs; | 
|  | struct atmel_smc_cs_conf smcconf; | 
|  | }; | 
|  |  | 
|  | struct atmel_ebi; | 
|  |  | 
|  | struct atmel_ebi_dev { | 
|  | struct list_head node; | 
|  | struct atmel_ebi *ebi; | 
|  | u32 mode; | 
|  | int numcs; | 
|  | struct atmel_ebi_dev_config configs[]; | 
|  | }; | 
|  |  | 
|  | struct atmel_ebi_caps { | 
|  | unsigned int available_cs; | 
|  | unsigned int ebi_csa_offs; | 
|  | const char *regmap_name; | 
|  | void (*get_config)(struct atmel_ebi_dev *ebid, | 
|  | struct atmel_ebi_dev_config *conf); | 
|  | int (*xlate_config)(struct atmel_ebi_dev *ebid, | 
|  | struct device_node *configs_np, | 
|  | struct atmel_ebi_dev_config *conf); | 
|  | void (*apply_config)(struct atmel_ebi_dev *ebid, | 
|  | struct atmel_ebi_dev_config *conf); | 
|  | }; | 
|  |  | 
|  | struct atmel_ebi { | 
|  | struct clk *clk; | 
|  | struct regmap *regmap; | 
|  | struct  { | 
|  | struct regmap *regmap; | 
|  | struct clk *clk; | 
|  | const struct atmel_hsmc_reg_layout *layout; | 
|  | } smc; | 
|  |  | 
|  | struct device *dev; | 
|  | const struct atmel_ebi_caps *caps; | 
|  | struct list_head devs; | 
|  | }; | 
|  |  | 
|  | struct atmel_smc_timing_xlate { | 
|  | const char *name; | 
|  | int (*converter)(struct atmel_smc_cs_conf *conf, | 
|  | unsigned int shift, unsigned int nycles); | 
|  | unsigned int shift; | 
|  | }; | 
|  |  | 
|  | #define ATMEL_SMC_SETUP_XLATE(nm, pos)	\ | 
|  | { .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos} | 
|  |  | 
|  | #define ATMEL_SMC_PULSE_XLATE(nm, pos)	\ | 
|  | { .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos} | 
|  |  | 
|  | #define ATMEL_SMC_CYCLE_XLATE(nm, pos)	\ | 
|  | { .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos} | 
|  |  | 
|  | static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid, | 
|  | struct atmel_ebi_dev_config *conf) | 
|  | { | 
|  | atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs, | 
|  | &conf->smcconf); | 
|  | } | 
|  |  | 
|  | static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid, | 
|  | struct atmel_ebi_dev_config *conf) | 
|  | { | 
|  | atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, | 
|  | conf->cs, &conf->smcconf); | 
|  | } | 
|  |  | 
|  | static const struct atmel_smc_timing_xlate timings_xlate_table[] = { | 
|  | ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-rd-setup-ns", | 
|  | ATMEL_SMC_NCS_RD_SHIFT), | 
|  | ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-wr-setup-ns", | 
|  | ATMEL_SMC_NCS_WR_SHIFT), | 
|  | ATMEL_SMC_SETUP_XLATE("atmel,smc-nrd-setup-ns", ATMEL_SMC_NRD_SHIFT), | 
|  | ATMEL_SMC_SETUP_XLATE("atmel,smc-nwe-setup-ns", ATMEL_SMC_NWE_SHIFT), | 
|  | ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-rd-pulse-ns", | 
|  | ATMEL_SMC_NCS_RD_SHIFT), | 
|  | ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-wr-pulse-ns", | 
|  | ATMEL_SMC_NCS_WR_SHIFT), | 
|  | ATMEL_SMC_PULSE_XLATE("atmel,smc-nrd-pulse-ns", ATMEL_SMC_NRD_SHIFT), | 
|  | ATMEL_SMC_PULSE_XLATE("atmel,smc-nwe-pulse-ns", ATMEL_SMC_NWE_SHIFT), | 
|  | ATMEL_SMC_CYCLE_XLATE("atmel,smc-nrd-cycle-ns", ATMEL_SMC_NRD_SHIFT), | 
|  | ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT), | 
|  | }; | 
|  |  | 
|  | static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid, | 
|  | struct device_node *np, | 
|  | struct atmel_smc_cs_conf *smcconf) | 
|  | { | 
|  | unsigned int clk_rate = clk_get_rate(ebid->ebi->clk); | 
|  | unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate; | 
|  | bool required = false; | 
|  | unsigned int ncycles; | 
|  | int ret, i; | 
|  | u32 val; | 
|  |  | 
|  | ret = of_property_read_u32(np, "atmel,smc-tdf-ns", &val); | 
|  | if (!ret) { | 
|  | required = true; | 
|  | ncycles = DIV_ROUND_UP(val, clk_period_ns); | 
|  | if (ncycles > ATMEL_SMC_MODE_TDF_MAX) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ncycles < ATMEL_SMC_MODE_TDF_MIN) | 
|  | ncycles = ATMEL_SMC_MODE_TDF_MIN; | 
|  |  | 
|  | smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(timings_xlate_table); i++) { | 
|  | const struct atmel_smc_timing_xlate *xlate; | 
|  |  | 
|  | xlate = &timings_xlate_table[i]; | 
|  |  | 
|  | ret = of_property_read_u32(np, xlate->name, &val); | 
|  | if (ret) { | 
|  | if (!required) | 
|  | continue; | 
|  | else | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!required) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | ncycles = DIV_ROUND_UP(val, clk_period_ns); | 
|  | ret = xlate->converter(smcconf, xlate->shift, ncycles); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (ret) { | 
|  | dev_err(ebid->ebi->dev, | 
|  | "missing or invalid timings definition in %pOF", | 
|  | np); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return required; | 
|  | } | 
|  |  | 
|  | static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid, | 
|  | struct device_node *np, | 
|  | struct atmel_ebi_dev_config *conf) | 
|  | { | 
|  | struct atmel_smc_cs_conf *smcconf = &conf->smcconf; | 
|  | bool required = false; | 
|  | const char *tmp_str; | 
|  | u32 tmp; | 
|  | int ret; | 
|  |  | 
|  | ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp); | 
|  | if (!ret) { | 
|  | switch (tmp) { | 
|  | case 8: | 
|  | smcconf->mode |= ATMEL_SMC_MODE_DBW_8; | 
|  | break; | 
|  |  | 
|  | case 16: | 
|  | smcconf->mode |= ATMEL_SMC_MODE_DBW_16; | 
|  | break; | 
|  |  | 
|  | case 32: | 
|  | smcconf->mode |= ATMEL_SMC_MODE_DBW_32; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | required = true; | 
|  | } | 
|  |  | 
|  | if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) { | 
|  | smcconf->mode |= ATMEL_SMC_MODE_TDFMODE_OPTIMIZED; | 
|  | required = true; | 
|  | } | 
|  |  | 
|  | tmp_str = NULL; | 
|  | of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str); | 
|  | if (tmp_str && !strcmp(tmp_str, "write")) { | 
|  | smcconf->mode |= ATMEL_SMC_MODE_BAT_WRITE; | 
|  | required = true; | 
|  | } | 
|  |  | 
|  | tmp_str = NULL; | 
|  | of_property_read_string(np, "atmel,smc-read-mode", &tmp_str); | 
|  | if (tmp_str && !strcmp(tmp_str, "nrd")) { | 
|  | smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD; | 
|  | required = true; | 
|  | } | 
|  |  | 
|  | tmp_str = NULL; | 
|  | of_property_read_string(np, "atmel,smc-write-mode", &tmp_str); | 
|  | if (tmp_str && !strcmp(tmp_str, "nwe")) { | 
|  | smcconf->mode |= ATMEL_SMC_MODE_WRITEMODE_NWE; | 
|  | required = true; | 
|  | } | 
|  |  | 
|  | tmp_str = NULL; | 
|  | of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str); | 
|  | if (tmp_str) { | 
|  | if (!strcmp(tmp_str, "frozen")) | 
|  | smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_FROZEN; | 
|  | else if (!strcmp(tmp_str, "ready")) | 
|  | smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_READY; | 
|  | else if (strcmp(tmp_str, "disabled")) | 
|  | return -EINVAL; | 
|  |  | 
|  | required = true; | 
|  | } | 
|  |  | 
|  | ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp); | 
|  | if (!ret) { | 
|  | switch (tmp) { | 
|  | case 4: | 
|  | smcconf->mode |= ATMEL_SMC_MODE_PS_4; | 
|  | break; | 
|  |  | 
|  | case 8: | 
|  | smcconf->mode |= ATMEL_SMC_MODE_PS_8; | 
|  | break; | 
|  |  | 
|  | case 16: | 
|  | smcconf->mode |= ATMEL_SMC_MODE_PS_16; | 
|  | break; | 
|  |  | 
|  | case 32: | 
|  | smcconf->mode |= ATMEL_SMC_MODE_PS_32; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | smcconf->mode |= ATMEL_SMC_MODE_PMEN; | 
|  | required = true; | 
|  | } | 
|  |  | 
|  | ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf); | 
|  | if (ret < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((ret > 0 && !required) || (!ret && required)) { | 
|  | dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF", | 
|  | np); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return required; | 
|  | } | 
|  |  | 
|  | static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid, | 
|  | struct atmel_ebi_dev_config *conf) | 
|  | { | 
|  | atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs, | 
|  | &conf->smcconf); | 
|  | } | 
|  |  | 
|  | static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid, | 
|  | struct atmel_ebi_dev_config *conf) | 
|  | { | 
|  | atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, | 
|  | conf->cs, &conf->smcconf); | 
|  | } | 
|  |  | 
|  | static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, | 
|  | int reg_cells) | 
|  | { | 
|  | const struct atmel_ebi_caps *caps = ebi->caps; | 
|  | struct atmel_ebi_dev_config conf = { }; | 
|  | struct device *dev = ebi->dev; | 
|  | struct atmel_ebi_dev *ebid; | 
|  | unsigned long cslines = 0; | 
|  | int ret, numcs = 0, nentries, i; | 
|  | bool apply = false; | 
|  | u32 cs; | 
|  |  | 
|  | nentries = of_property_count_elems_of_size(np, "reg", | 
|  | reg_cells * sizeof(u32)); | 
|  | for (i = 0; i < nentries; i++) { | 
|  | ret = of_property_read_u32_index(np, "reg", i * reg_cells, | 
|  | &cs); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (cs >= AT91_EBI_NUM_CS || | 
|  | !(ebi->caps->available_cs & BIT(cs))) { | 
|  | dev_err(dev, "invalid reg property in %pOF\n", np); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!test_and_set_bit(cs, &cslines)) | 
|  | numcs++; | 
|  | } | 
|  |  | 
|  | if (!numcs) { | 
|  | dev_err(dev, "invalid reg property in %pOF\n", np); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ebid = devm_kzalloc(ebi->dev, struct_size(ebid, configs, numcs), | 
|  | GFP_KERNEL); | 
|  | if (!ebid) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ebid->ebi = ebi; | 
|  | ebid->numcs = numcs; | 
|  |  | 
|  | ret = caps->xlate_config(ebid, np, &conf); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | else if (ret) | 
|  | apply = true; | 
|  |  | 
|  | i = 0; | 
|  | for_each_set_bit(cs, &cslines, AT91_EBI_NUM_CS) { | 
|  | ebid->configs[i].cs = cs; | 
|  |  | 
|  | if (apply) { | 
|  | conf.cs = cs; | 
|  | caps->apply_config(ebid, &conf); | 
|  | } | 
|  |  | 
|  | caps->get_config(ebid, &ebid->configs[i]); | 
|  |  | 
|  | /* | 
|  | * Attach the EBI device to the generic SMC logic if at least | 
|  | * one "atmel,smc-" property is present. | 
|  | */ | 
|  | if (ebi->caps->ebi_csa_offs && apply) | 
|  | regmap_update_bits(ebi->regmap, | 
|  | ebi->caps->ebi_csa_offs, | 
|  | BIT(cs), 0); | 
|  |  | 
|  | i++; | 
|  | } | 
|  |  | 
|  | list_add_tail(&ebid->node, &ebi->devs); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct atmel_ebi_caps at91sam9260_ebi_caps = { | 
|  | .available_cs = 0xff, | 
|  | .ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA, | 
|  | .regmap_name = "atmel,matrix", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps at91sam9261_ebi_caps = { | 
|  | .available_cs = 0xff, | 
|  | .ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA, | 
|  | .regmap_name = "atmel,matrix", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps at91sam9263_ebi0_caps = { | 
|  | .available_cs = 0x3f, | 
|  | .ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA, | 
|  | .regmap_name = "atmel,matrix", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps at91sam9263_ebi1_caps = { | 
|  | .available_cs = 0x7, | 
|  | .ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA, | 
|  | .regmap_name = "atmel,matrix", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps at91sam9rl_ebi_caps = { | 
|  | .available_cs = 0x3f, | 
|  | .ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA, | 
|  | .regmap_name = "atmel,matrix", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps at91sam9g45_ebi_caps = { | 
|  | .available_cs = 0x3f, | 
|  | .ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA, | 
|  | .regmap_name = "atmel,matrix", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps at91sam9x5_ebi_caps = { | 
|  | .available_cs = 0x3f, | 
|  | .ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA, | 
|  | .regmap_name = "atmel,matrix", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps sama5d3_ebi_caps = { | 
|  | .available_cs = 0xf, | 
|  | .get_config = sama5_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = sama5_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct atmel_ebi_caps sam9x60_ebi_caps = { | 
|  | .available_cs = 0x3f, | 
|  | .ebi_csa_offs = AT91_SFR_CCFG_EBICSA, | 
|  | .regmap_name = "microchip,sfr", | 
|  | .get_config = at91sam9_ebi_get_config, | 
|  | .xlate_config = atmel_ebi_xslate_smc_config, | 
|  | .apply_config = at91sam9_ebi_apply_config, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id atmel_ebi_id_table[] = { | 
|  | { | 
|  | .compatible = "atmel,at91sam9260-ebi", | 
|  | .data = &at91sam9260_ebi_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "atmel,at91sam9261-ebi", | 
|  | .data = &at91sam9261_ebi_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "atmel,at91sam9263-ebi0", | 
|  | .data = &at91sam9263_ebi0_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "atmel,at91sam9263-ebi1", | 
|  | .data = &at91sam9263_ebi1_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "atmel,at91sam9rl-ebi", | 
|  | .data = &at91sam9rl_ebi_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "atmel,at91sam9g45-ebi", | 
|  | .data = &at91sam9g45_ebi_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "atmel,at91sam9x5-ebi", | 
|  | .data = &at91sam9x5_ebi_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "atmel,sama5d3-ebi", | 
|  | .data = &sama5d3_ebi_caps, | 
|  | }, | 
|  | { | 
|  | .compatible = "microchip,sam9x60-ebi", | 
|  | .data = &sam9x60_ebi_caps, | 
|  | }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  |  | 
|  | static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np) | 
|  | { | 
|  | struct device *dev = ebi->dev; | 
|  | struct property *newprop; | 
|  |  | 
|  | newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL); | 
|  | if (!newprop) | 
|  | return -ENOMEM; | 
|  |  | 
|  | newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL); | 
|  | if (!newprop->name) | 
|  | return -ENOMEM; | 
|  |  | 
|  | newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL); | 
|  | if (!newprop->value) | 
|  | return -ENOMEM; | 
|  |  | 
|  | newprop->length = sizeof("disabled"); | 
|  |  | 
|  | return of_update_property(np, newprop); | 
|  | } | 
|  |  | 
|  | static int atmel_ebi_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *child, *np = dev->of_node, *smc_np; | 
|  | const struct of_device_id *match; | 
|  | struct atmel_ebi *ebi; | 
|  | int ret, reg_cells; | 
|  | struct clk *clk; | 
|  | u32 val; | 
|  |  | 
|  | match = of_match_device(atmel_ebi_id_table, dev); | 
|  | if (!match || !match->data) | 
|  | return -EINVAL; | 
|  |  | 
|  | ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL); | 
|  | if (!ebi) | 
|  | return -ENOMEM; | 
|  |  | 
|  | platform_set_drvdata(pdev, ebi); | 
|  |  | 
|  | INIT_LIST_HEAD(&ebi->devs); | 
|  | ebi->caps = match->data; | 
|  | ebi->dev = dev; | 
|  |  | 
|  | clk = devm_clk_get(dev, NULL); | 
|  | if (IS_ERR(clk)) | 
|  | return PTR_ERR(clk); | 
|  |  | 
|  | ebi->clk = clk; | 
|  |  | 
|  | smc_np = of_parse_phandle(dev->of_node, "atmel,smc", 0); | 
|  |  | 
|  | ebi->smc.regmap = syscon_node_to_regmap(smc_np); | 
|  | if (IS_ERR(ebi->smc.regmap)) | 
|  | return PTR_ERR(ebi->smc.regmap); | 
|  |  | 
|  | ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np); | 
|  | if (IS_ERR(ebi->smc.layout)) | 
|  | return PTR_ERR(ebi->smc.layout); | 
|  |  | 
|  | ebi->smc.clk = of_clk_get(smc_np, 0); | 
|  | if (IS_ERR(ebi->smc.clk)) { | 
|  | if (PTR_ERR(ebi->smc.clk) != -ENOENT) | 
|  | return PTR_ERR(ebi->smc.clk); | 
|  |  | 
|  | ebi->smc.clk = NULL; | 
|  | } | 
|  | ret = clk_prepare_enable(ebi->smc.clk); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * The sama5d3 does not provide an EBICSA register and thus does need | 
|  | * to access it. | 
|  | */ | 
|  | if (ebi->caps->ebi_csa_offs) { | 
|  | ebi->regmap = | 
|  | syscon_regmap_lookup_by_phandle(np, | 
|  | ebi->caps->regmap_name); | 
|  | if (IS_ERR(ebi->regmap)) | 
|  | return PTR_ERR(ebi->regmap); | 
|  | } | 
|  |  | 
|  | ret = of_property_read_u32(np, "#address-cells", &val); | 
|  | if (ret) { | 
|  | dev_err(dev, "missing #address-cells property\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | reg_cells = val; | 
|  |  | 
|  | ret = of_property_read_u32(np, "#size-cells", &val); | 
|  | if (ret) { | 
|  | dev_err(dev, "missing #address-cells property\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | reg_cells += val; | 
|  |  | 
|  | for_each_available_child_of_node(np, child) { | 
|  | if (!of_find_property(child, "reg", NULL)) | 
|  | continue; | 
|  |  | 
|  | ret = atmel_ebi_dev_setup(ebi, child, reg_cells); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device", | 
|  | child); | 
|  |  | 
|  | ret = atmel_ebi_dev_disable(ebi, child); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return of_platform_populate(np, NULL, NULL, dev); | 
|  | } | 
|  |  | 
|  | static __maybe_unused int atmel_ebi_resume(struct device *dev) | 
|  | { | 
|  | struct atmel_ebi *ebi = dev_get_drvdata(dev); | 
|  | struct atmel_ebi_dev *ebid; | 
|  |  | 
|  | list_for_each_entry(ebid, &ebi->devs, node) { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ebid->numcs; i++) | 
|  | ebid->ebi->caps->apply_config(ebid, &ebid->configs[i]); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(atmel_ebi_pm_ops, NULL, atmel_ebi_resume); | 
|  |  | 
|  | static struct platform_driver atmel_ebi_driver = { | 
|  | .driver = { | 
|  | .name = "atmel-ebi", | 
|  | .of_match_table	= atmel_ebi_id_table, | 
|  | .pm = &atmel_ebi_pm_ops, | 
|  | }, | 
|  | }; | 
|  | builtin_platform_driver_probe(atmel_ebi_driver, atmel_ebi_probe); |