| /* |
| * linux/drivers/video/omap2/dss/display.c |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * Some code and ideas taken from drivers/video/omap/ driver |
| * by Imre Deak. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define DSS_SUBSYS_NAME "DISPLAY" |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/list.h> |
| #include <linux/platform_device.h> |
| |
| #include <plat/display.h> |
| #include "dss.h" |
| |
| static LIST_HEAD(display_list); |
| |
| static ssize_t display_enabled_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| bool enabled = dssdev->state != OMAP_DSS_DISPLAY_DISABLED; |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", enabled); |
| } |
| |
| static ssize_t display_enabled_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| bool enabled, r; |
| |
| enabled = simple_strtoul(buf, NULL, 10); |
| |
| if (enabled != (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)) { |
| if (enabled) { |
| r = dssdev->enable(dssdev); |
| if (r) |
| return r; |
| } else { |
| dssdev->disable(dssdev); |
| } |
| } |
| |
| return size; |
| } |
| |
| static ssize_t display_upd_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO; |
| if (dssdev->get_update_mode) |
| mode = dssdev->get_update_mode(dssdev); |
| return snprintf(buf, PAGE_SIZE, "%d\n", mode); |
| } |
| |
| static ssize_t display_upd_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| int val, r; |
| enum omap_dss_update_mode mode; |
| |
| val = simple_strtoul(buf, NULL, 10); |
| |
| switch (val) { |
| case OMAP_DSS_UPDATE_DISABLED: |
| case OMAP_DSS_UPDATE_AUTO: |
| case OMAP_DSS_UPDATE_MANUAL: |
| mode = (enum omap_dss_update_mode)val; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| r = dssdev->set_update_mode(dssdev, mode); |
| if (r) |
| return r; |
| |
| return size; |
| } |
| |
| static ssize_t display_tear_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| dssdev->get_te ? dssdev->get_te(dssdev) : 0); |
| } |
| |
| static ssize_t display_tear_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| unsigned long te; |
| int r; |
| |
| if (!dssdev->enable_te || !dssdev->get_te) |
| return -ENOENT; |
| |
| te = simple_strtoul(buf, NULL, 0); |
| |
| r = dssdev->enable_te(dssdev, te); |
| if (r) |
| return r; |
| |
| return size; |
| } |
| |
| static ssize_t display_timings_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| struct omap_video_timings t; |
| |
| if (!dssdev->get_timings) |
| return -ENOENT; |
| |
| dssdev->get_timings(dssdev, &t); |
| |
| return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n", |
| t.pixel_clock, |
| t.x_res, t.hfp, t.hbp, t.hsw, |
| t.y_res, t.vfp, t.vbp, t.vsw); |
| } |
| |
| static ssize_t display_timings_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| struct omap_video_timings t; |
| int r, found; |
| |
| if (!dssdev->set_timings || !dssdev->check_timings) |
| return -ENOENT; |
| |
| found = 0; |
| #ifdef CONFIG_OMAP2_DSS_VENC |
| if (strncmp("pal", buf, 3) == 0) { |
| t = omap_dss_pal_timings; |
| found = 1; |
| } else if (strncmp("ntsc", buf, 4) == 0) { |
| t = omap_dss_ntsc_timings; |
| found = 1; |
| } |
| #endif |
| if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu", |
| &t.pixel_clock, |
| &t.x_res, &t.hfp, &t.hbp, &t.hsw, |
| &t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9) |
| return -EINVAL; |
| |
| r = dssdev->check_timings(dssdev, &t); |
| if (r) |
| return r; |
| |
| dssdev->set_timings(dssdev, &t); |
| |
| return size; |
| } |
| |
| static ssize_t display_rotate_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| int rotate; |
| if (!dssdev->get_rotate) |
| return -ENOENT; |
| rotate = dssdev->get_rotate(dssdev); |
| return snprintf(buf, PAGE_SIZE, "%u\n", rotate); |
| } |
| |
| static ssize_t display_rotate_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| unsigned long rot; |
| int r; |
| |
| if (!dssdev->set_rotate || !dssdev->get_rotate) |
| return -ENOENT; |
| |
| rot = simple_strtoul(buf, NULL, 0); |
| |
| r = dssdev->set_rotate(dssdev, rot); |
| if (r) |
| return r; |
| |
| return size; |
| } |
| |
| static ssize_t display_mirror_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| int mirror; |
| if (!dssdev->get_mirror) |
| return -ENOENT; |
| mirror = dssdev->get_mirror(dssdev); |
| return snprintf(buf, PAGE_SIZE, "%u\n", mirror); |
| } |
| |
| static ssize_t display_mirror_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| unsigned long mirror; |
| int r; |
| |
| if (!dssdev->set_mirror || !dssdev->get_mirror) |
| return -ENOENT; |
| |
| mirror = simple_strtoul(buf, NULL, 0); |
| |
| r = dssdev->set_mirror(dssdev, mirror); |
| if (r) |
| return r; |
| |
| return size; |
| } |
| |
| static ssize_t display_wss_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| unsigned int wss; |
| |
| if (!dssdev->get_wss) |
| return -ENOENT; |
| |
| wss = dssdev->get_wss(dssdev); |
| |
| return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss); |
| } |
| |
| static ssize_t display_wss_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| unsigned long wss; |
| int r; |
| |
| if (!dssdev->get_wss || !dssdev->set_wss) |
| return -ENOENT; |
| |
| if (strict_strtoul(buf, 0, &wss)) |
| return -EINVAL; |
| |
| if (wss > 0xfffff) |
| return -EINVAL; |
| |
| r = dssdev->set_wss(dssdev, wss); |
| if (r) |
| return r; |
| |
| return size; |
| } |
| |
| static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR, |
| display_enabled_show, display_enabled_store); |
| static DEVICE_ATTR(update_mode, S_IRUGO|S_IWUSR, |
| display_upd_mode_show, display_upd_mode_store); |
| static DEVICE_ATTR(tear_elim, S_IRUGO|S_IWUSR, |
| display_tear_show, display_tear_store); |
| static DEVICE_ATTR(timings, S_IRUGO|S_IWUSR, |
| display_timings_show, display_timings_store); |
| static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR, |
| display_rotate_show, display_rotate_store); |
| static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR, |
| display_mirror_show, display_mirror_store); |
| static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR, |
| display_wss_show, display_wss_store); |
| |
| static struct device_attribute *display_sysfs_attrs[] = { |
| &dev_attr_enabled, |
| &dev_attr_update_mode, |
| &dev_attr_tear_elim, |
| &dev_attr_timings, |
| &dev_attr_rotate, |
| &dev_attr_mirror, |
| &dev_attr_wss, |
| NULL |
| }; |
| |
| static void default_get_resolution(struct omap_dss_device *dssdev, |
| u16 *xres, u16 *yres) |
| { |
| *xres = dssdev->panel.timings.x_res; |
| *yres = dssdev->panel.timings.y_res; |
| } |
| |
| void default_get_overlay_fifo_thresholds(enum omap_plane plane, |
| u32 fifo_size, enum omap_burst_size *burst_size, |
| u32 *fifo_low, u32 *fifo_high) |
| { |
| unsigned burst_size_bytes; |
| |
| *burst_size = OMAP_DSS_BURST_16x32; |
| burst_size_bytes = 16 * 32 / 8; |
| |
| *fifo_high = fifo_size - 1; |
| *fifo_low = fifo_size - burst_size_bytes; |
| } |
| |
| static int default_wait_vsync(struct omap_dss_device *dssdev) |
| { |
| unsigned long timeout = msecs_to_jiffies(500); |
| u32 irq; |
| |
| if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) |
| irq = DISPC_IRQ_EVSYNC_ODD; |
| else |
| irq = DISPC_IRQ_VSYNC; |
| |
| return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); |
| } |
| |
| static int default_get_recommended_bpp(struct omap_dss_device *dssdev) |
| { |
| if (dssdev->panel.recommended_bpp) |
| return dssdev->panel.recommended_bpp; |
| |
| switch (dssdev->type) { |
| case OMAP_DISPLAY_TYPE_DPI: |
| if (dssdev->phy.dpi.data_lines == 24) |
| return 24; |
| else |
| return 16; |
| |
| case OMAP_DISPLAY_TYPE_DBI: |
| case OMAP_DISPLAY_TYPE_DSI: |
| if (dssdev->ctrl.pixel_size == 24) |
| return 24; |
| else |
| return 16; |
| case OMAP_DISPLAY_TYPE_VENC: |
| case OMAP_DISPLAY_TYPE_SDI: |
| return 24; |
| return 24; |
| default: |
| BUG(); |
| } |
| } |
| |
| /* Checks if replication logic should be used. Only use for active matrix, |
| * when overlay is in RGB12U or RGB16 mode, and LCD interface is |
| * 18bpp or 24bpp */ |
| bool dss_use_replication(struct omap_dss_device *dssdev, |
| enum omap_color_mode mode) |
| { |
| int bpp; |
| |
| if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16) |
| return false; |
| |
| if (dssdev->type == OMAP_DISPLAY_TYPE_DPI && |
| (dssdev->panel.config & OMAP_DSS_LCD_TFT) == 0) |
| return false; |
| |
| switch (dssdev->type) { |
| case OMAP_DISPLAY_TYPE_DPI: |
| bpp = dssdev->phy.dpi.data_lines; |
| break; |
| case OMAP_DISPLAY_TYPE_VENC: |
| case OMAP_DISPLAY_TYPE_SDI: |
| bpp = 24; |
| break; |
| case OMAP_DISPLAY_TYPE_DBI: |
| case OMAP_DISPLAY_TYPE_DSI: |
| bpp = dssdev->ctrl.pixel_size; |
| break; |
| default: |
| BUG(); |
| } |
| |
| return bpp > 16; |
| } |
| |
| void dss_init_device(struct platform_device *pdev, |
| struct omap_dss_device *dssdev) |
| { |
| struct device_attribute *attr; |
| int i; |
| int r; |
| |
| switch (dssdev->type) { |
| case OMAP_DISPLAY_TYPE_DPI: |
| #ifdef CONFIG_OMAP2_DSS_RFBI |
| case OMAP_DISPLAY_TYPE_DBI: |
| #endif |
| #ifdef CONFIG_OMAP2_DSS_SDI |
| case OMAP_DISPLAY_TYPE_SDI: |
| #endif |
| #ifdef CONFIG_OMAP2_DSS_DSI |
| case OMAP_DISPLAY_TYPE_DSI: |
| #endif |
| #ifdef CONFIG_OMAP2_DSS_VENC |
| case OMAP_DISPLAY_TYPE_VENC: |
| #endif |
| break; |
| default: |
| DSSERR("Support for display '%s' not compiled in.\n", |
| dssdev->name); |
| return; |
| } |
| |
| dssdev->get_resolution = default_get_resolution; |
| dssdev->get_recommended_bpp = default_get_recommended_bpp; |
| dssdev->wait_vsync = default_wait_vsync; |
| |
| switch (dssdev->type) { |
| case OMAP_DISPLAY_TYPE_DPI: |
| r = dpi_init_display(dssdev); |
| break; |
| #ifdef CONFIG_OMAP2_DSS_RFBI |
| case OMAP_DISPLAY_TYPE_DBI: |
| r = rfbi_init_display(dssdev); |
| break; |
| #endif |
| #ifdef CONFIG_OMAP2_DSS_VENC |
| case OMAP_DISPLAY_TYPE_VENC: |
| r = venc_init_display(dssdev); |
| break; |
| #endif |
| #ifdef CONFIG_OMAP2_DSS_SDI |
| case OMAP_DISPLAY_TYPE_SDI: |
| r = sdi_init_display(dssdev); |
| break; |
| #endif |
| #ifdef CONFIG_OMAP2_DSS_DSI |
| case OMAP_DISPLAY_TYPE_DSI: |
| r = dsi_init_display(dssdev); |
| break; |
| #endif |
| default: |
| BUG(); |
| } |
| |
| if (r) { |
| DSSERR("failed to init display %s\n", dssdev->name); |
| return; |
| } |
| |
| /* create device sysfs files */ |
| i = 0; |
| while ((attr = display_sysfs_attrs[i++]) != NULL) { |
| r = device_create_file(&dssdev->dev, attr); |
| if (r) |
| DSSERR("failed to create sysfs file\n"); |
| } |
| |
| /* create display? sysfs links */ |
| r = sysfs_create_link(&pdev->dev.kobj, &dssdev->dev.kobj, |
| dev_name(&dssdev->dev)); |
| if (r) |
| DSSERR("failed to create sysfs display link\n"); |
| } |
| |
| void dss_uninit_device(struct platform_device *pdev, |
| struct omap_dss_device *dssdev) |
| { |
| struct device_attribute *attr; |
| int i = 0; |
| |
| sysfs_remove_link(&pdev->dev.kobj, dev_name(&dssdev->dev)); |
| |
| while ((attr = display_sysfs_attrs[i++]) != NULL) |
| device_remove_file(&dssdev->dev, attr); |
| |
| if (dssdev->manager) |
| dssdev->manager->unset_device(dssdev->manager); |
| } |
| |
| static int dss_suspend_device(struct device *dev, void *data) |
| { |
| int r; |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| |
| if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) { |
| dssdev->activate_after_resume = false; |
| return 0; |
| } |
| |
| if (!dssdev->suspend) { |
| DSSERR("display '%s' doesn't implement suspend\n", |
| dssdev->name); |
| return -ENOSYS; |
| } |
| |
| r = dssdev->suspend(dssdev); |
| if (r) |
| return r; |
| |
| dssdev->activate_after_resume = true; |
| |
| return 0; |
| } |
| |
| int dss_suspend_all_devices(void) |
| { |
| int r; |
| struct bus_type *bus = dss_get_bus(); |
| |
| r = bus_for_each_dev(bus, NULL, NULL, dss_suspend_device); |
| if (r) { |
| /* resume all displays that were suspended */ |
| dss_resume_all_devices(); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int dss_resume_device(struct device *dev, void *data) |
| { |
| int r; |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| |
| if (dssdev->activate_after_resume && dssdev->resume) { |
| r = dssdev->resume(dssdev); |
| if (r) |
| return r; |
| } |
| |
| dssdev->activate_after_resume = false; |
| |
| return 0; |
| } |
| |
| int dss_resume_all_devices(void) |
| { |
| struct bus_type *bus = dss_get_bus(); |
| |
| return bus_for_each_dev(bus, NULL, NULL, dss_resume_device); |
| } |
| |
| static int dss_disable_device(struct device *dev, void *data) |
| { |
| struct omap_dss_device *dssdev = to_dss_device(dev); |
| dssdev->disable(dssdev); |
| return 0; |
| } |
| |
| void dss_disable_all_devices(void) |
| { |
| struct bus_type *bus = dss_get_bus(); |
| bus_for_each_dev(bus, NULL, NULL, dss_disable_device); |
| } |
| |
| |
| void omap_dss_get_device(struct omap_dss_device *dssdev) |
| { |
| get_device(&dssdev->dev); |
| } |
| EXPORT_SYMBOL(omap_dss_get_device); |
| |
| void omap_dss_put_device(struct omap_dss_device *dssdev) |
| { |
| put_device(&dssdev->dev); |
| } |
| EXPORT_SYMBOL(omap_dss_put_device); |
| |
| /* ref count of the found device is incremented. ref count |
| * of from-device is decremented. */ |
| struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from) |
| { |
| struct device *dev; |
| struct device *dev_start = NULL; |
| struct omap_dss_device *dssdev = NULL; |
| |
| int match(struct device *dev, void *data) |
| { |
| /* skip panels connected to controllers */ |
| if (to_dss_device(dev)->panel.ctrl) |
| return 0; |
| |
| return 1; |
| } |
| |
| if (from) |
| dev_start = &from->dev; |
| dev = bus_find_device(dss_get_bus(), dev_start, NULL, match); |
| if (dev) |
| dssdev = to_dss_device(dev); |
| if (from) |
| put_device(&from->dev); |
| |
| return dssdev; |
| } |
| EXPORT_SYMBOL(omap_dss_get_next_device); |
| |
| struct omap_dss_device *omap_dss_find_device(void *data, |
| int (*match)(struct omap_dss_device *dssdev, void *data)) |
| { |
| struct omap_dss_device *dssdev = NULL; |
| |
| while ((dssdev = omap_dss_get_next_device(dssdev)) != NULL) { |
| if (match(dssdev, data)) |
| return dssdev; |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(omap_dss_find_device); |
| |
| int omap_dss_start_device(struct omap_dss_device *dssdev) |
| { |
| int r; |
| |
| if (!dssdev->driver) { |
| DSSDBG("no driver\n"); |
| r = -ENODEV; |
| goto err0; |
| } |
| |
| if (dssdev->ctrl.panel && !dssdev->ctrl.panel->driver) { |
| DSSDBG("no panel driver\n"); |
| r = -ENODEV; |
| goto err0; |
| } |
| |
| if (!try_module_get(dssdev->dev.driver->owner)) { |
| r = -ENODEV; |
| goto err0; |
| } |
| |
| if (dssdev->ctrl.panel) { |
| if (!try_module_get(dssdev->ctrl.panel->dev.driver->owner)) { |
| r = -ENODEV; |
| goto err1; |
| } |
| } |
| |
| return 0; |
| err1: |
| module_put(dssdev->dev.driver->owner); |
| err0: |
| return r; |
| } |
| EXPORT_SYMBOL(omap_dss_start_device); |
| |
| void omap_dss_stop_device(struct omap_dss_device *dssdev) |
| { |
| if (dssdev->ctrl.panel) |
| module_put(dssdev->ctrl.panel->dev.driver->owner); |
| |
| module_put(dssdev->dev.driver->owner); |
| } |
| EXPORT_SYMBOL(omap_dss_stop_device); |
| |