| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Userspace interface |
| * Linux ethernet bridge |
| * |
| * Authors: |
| * Lennert Buytenhek <buytenh@gnu.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/netpoll.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_arp.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/if_ether.h> |
| #include <linux/slab.h> |
| #include <net/dsa.h> |
| #include <net/sock.h> |
| #include <linux/if_vlan.h> |
| #include <net/switchdev.h> |
| #include <net/net_namespace.h> |
| |
| #include "br_private.h" |
| |
| /* |
| * Determine initial path cost based on speed. |
| * using recommendations from 802.1d standard |
| * |
| * Since driver might sleep need to not be holding any locks. |
| */ |
| static int port_cost(struct net_device *dev) |
| { |
| struct ethtool_link_ksettings ecmd; |
| |
| if (!__ethtool_get_link_ksettings(dev, &ecmd)) { |
| switch (ecmd.base.speed) { |
| case SPEED_10000: |
| return 2; |
| case SPEED_5000: |
| return 3; |
| case SPEED_2500: |
| return 4; |
| case SPEED_1000: |
| return 5; |
| case SPEED_100: |
| return 19; |
| case SPEED_10: |
| return 100; |
| case SPEED_UNKNOWN: |
| return 100; |
| default: |
| if (ecmd.base.speed > SPEED_10000) |
| return 1; |
| } |
| } |
| |
| /* Old silly heuristics based on name */ |
| if (!strncmp(dev->name, "lec", 3)) |
| return 7; |
| |
| if (!strncmp(dev->name, "plip", 4)) |
| return 2500; |
| |
| return 100; /* assume old 10Mbps */ |
| } |
| |
| |
| /* Check for port carrier transitions. */ |
| void br_port_carrier_check(struct net_bridge_port *p, bool *notified) |
| { |
| struct net_device *dev = p->dev; |
| struct net_bridge *br = p->br; |
| |
| if (!(p->flags & BR_ADMIN_COST) && |
| netif_running(dev) && netif_oper_up(dev)) |
| p->path_cost = port_cost(dev); |
| |
| *notified = false; |
| if (!netif_running(br->dev)) |
| return; |
| |
| spin_lock_bh(&br->lock); |
| if (netif_running(dev) && netif_oper_up(dev)) { |
| if (p->state == BR_STATE_DISABLED) { |
| br_stp_enable_port(p); |
| *notified = true; |
| } |
| } else { |
| if (p->state != BR_STATE_DISABLED) { |
| br_stp_disable_port(p); |
| *notified = true; |
| } |
| } |
| spin_unlock_bh(&br->lock); |
| } |
| |
| static void br_port_set_promisc(struct net_bridge_port *p) |
| { |
| int err = 0; |
| |
| if (br_promisc_port(p)) |
| return; |
| |
| err = dev_set_promiscuity(p->dev, 1); |
| if (err) |
| return; |
| |
| br_fdb_unsync_static(p->br, p); |
| p->flags |= BR_PROMISC; |
| } |
| |
| static void br_port_clear_promisc(struct net_bridge_port *p) |
| { |
| int err; |
| |
| /* Check if the port is already non-promisc or if it doesn't |
| * support UNICAST filtering. Without unicast filtering support |
| * we'll end up re-enabling promisc mode anyway, so just check for |
| * it here. |
| */ |
| if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT)) |
| return; |
| |
| /* Since we'll be clearing the promisc mode, program the port |
| * first so that we don't have interruption in traffic. |
| */ |
| err = br_fdb_sync_static(p->br, p); |
| if (err) |
| return; |
| |
| dev_set_promiscuity(p->dev, -1); |
| p->flags &= ~BR_PROMISC; |
| } |
| |
| /* When a port is added or removed or when certain port flags |
| * change, this function is called to automatically manage |
| * promiscuity setting of all the bridge ports. We are always called |
| * under RTNL so can skip using rcu primitives. |
| */ |
| void br_manage_promisc(struct net_bridge *br) |
| { |
| struct net_bridge_port *p; |
| bool set_all = false; |
| |
| /* If vlan filtering is disabled or bridge interface is placed |
| * into promiscuous mode, place all ports in promiscuous mode. |
| */ |
| if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br->dev)) |
| set_all = true; |
| |
| list_for_each_entry(p, &br->port_list, list) { |
| if (set_all) { |
| br_port_set_promisc(p); |
| } else { |
| /* If the number of auto-ports is <= 1, then all other |
| * ports will have their output configuration |
| * statically specified through fdbs. Since ingress |
| * on the auto-port becomes forwarding/egress to other |
| * ports and egress configuration is statically known, |
| * we can say that ingress configuration of the |
| * auto-port is also statically known. |
| * This lets us disable promiscuous mode and write |
| * this config to hw. |
| */ |
| if (br->auto_cnt == 0 || |
| (br->auto_cnt == 1 && br_auto_port(p))) |
| br_port_clear_promisc(p); |
| else |
| br_port_set_promisc(p); |
| } |
| } |
| } |
| |
| int nbp_backup_change(struct net_bridge_port *p, |
| struct net_device *backup_dev) |
| { |
| struct net_bridge_port *old_backup = rtnl_dereference(p->backup_port); |
| struct net_bridge_port *backup_p = NULL; |
| |
| ASSERT_RTNL(); |
| |
| if (backup_dev) { |
| if (!netif_is_bridge_port(backup_dev)) |
| return -ENOENT; |
| |
| backup_p = br_port_get_rtnl(backup_dev); |
| if (backup_p->br != p->br) |
| return -EINVAL; |
| } |
| |
| if (p == backup_p) |
| return -EINVAL; |
| |
| if (old_backup == backup_p) |
| return 0; |
| |
| /* if the backup link is already set, clear it */ |
| if (old_backup) |
| old_backup->backup_redirected_cnt--; |
| |
| if (backup_p) |
| backup_p->backup_redirected_cnt++; |
| rcu_assign_pointer(p->backup_port, backup_p); |
| |
| return 0; |
| } |
| |
| static void nbp_backup_clear(struct net_bridge_port *p) |
| { |
| nbp_backup_change(p, NULL); |
| if (p->backup_redirected_cnt) { |
| struct net_bridge_port *cur_p; |
| |
| list_for_each_entry(cur_p, &p->br->port_list, list) { |
| struct net_bridge_port *backup_p; |
| |
| backup_p = rtnl_dereference(cur_p->backup_port); |
| if (backup_p == p) |
| nbp_backup_change(cur_p, NULL); |
| } |
| } |
| |
| WARN_ON(rcu_access_pointer(p->backup_port) || p->backup_redirected_cnt); |
| } |
| |
| static void nbp_update_port_count(struct net_bridge *br) |
| { |
| struct net_bridge_port *p; |
| u32 cnt = 0; |
| |
| list_for_each_entry(p, &br->port_list, list) { |
| if (br_auto_port(p)) |
| cnt++; |
| } |
| if (br->auto_cnt != cnt) { |
| br->auto_cnt = cnt; |
| br_manage_promisc(br); |
| } |
| } |
| |
| static void nbp_delete_promisc(struct net_bridge_port *p) |
| { |
| /* If port is currently promiscuous, unset promiscuity. |
| * Otherwise, it is a static port so remove all addresses |
| * from it. |
| */ |
| dev_set_allmulti(p->dev, -1); |
| if (br_promisc_port(p)) |
| dev_set_promiscuity(p->dev, -1); |
| else |
| br_fdb_unsync_static(p->br, p); |
| } |
| |
| static void release_nbp(struct kobject *kobj) |
| { |
| struct net_bridge_port *p |
| = container_of(kobj, struct net_bridge_port, kobj); |
| kfree(p); |
| } |
| |
| static void brport_get_ownership(const struct kobject *kobj, kuid_t *uid, kgid_t *gid) |
| { |
| struct net_bridge_port *p = kobj_to_brport(kobj); |
| |
| net_ns_get_ownership(dev_net(p->dev), uid, gid); |
| } |
| |
| static const struct kobj_type brport_ktype = { |
| #ifdef CONFIG_SYSFS |
| .sysfs_ops = &brport_sysfs_ops, |
| #endif |
| .release = release_nbp, |
| .get_ownership = brport_get_ownership, |
| }; |
| |
| static void destroy_nbp(struct net_bridge_port *p) |
| { |
| struct net_device *dev = p->dev; |
| |
| p->br = NULL; |
| p->dev = NULL; |
| netdev_put(dev, &p->dev_tracker); |
| |
| kobject_put(&p->kobj); |
| } |
| |
| static void destroy_nbp_rcu(struct rcu_head *head) |
| { |
| struct net_bridge_port *p = |
| container_of(head, struct net_bridge_port, rcu); |
| destroy_nbp(p); |
| } |
| |
| static unsigned get_max_headroom(struct net_bridge *br) |
| { |
| unsigned max_headroom = 0; |
| struct net_bridge_port *p; |
| |
| list_for_each_entry(p, &br->port_list, list) { |
| unsigned dev_headroom = netdev_get_fwd_headroom(p->dev); |
| |
| if (dev_headroom > max_headroom) |
| max_headroom = dev_headroom; |
| } |
| |
| return max_headroom; |
| } |
| |
| static void update_headroom(struct net_bridge *br, int new_hr) |
| { |
| struct net_bridge_port *p; |
| |
| list_for_each_entry(p, &br->port_list, list) |
| netdev_set_rx_headroom(p->dev, new_hr); |
| |
| br->dev->needed_headroom = new_hr; |
| } |
| |
| /* Delete port(interface) from bridge is done in two steps. |
| * via RCU. First step, marks device as down. That deletes |
| * all the timers and stops new packets from flowing through. |
| * |
| * Final cleanup doesn't occur until after all CPU's finished |
| * processing packets. |
| * |
| * Protected from multiple admin operations by RTNL mutex |
| */ |
| static void del_nbp(struct net_bridge_port *p) |
| { |
| struct net_bridge *br = p->br; |
| struct net_device *dev = p->dev; |
| |
| sysfs_remove_link(br->ifobj, p->dev->name); |
| |
| nbp_delete_promisc(p); |
| |
| spin_lock_bh(&br->lock); |
| br_stp_disable_port(p); |
| spin_unlock_bh(&br->lock); |
| |
| br_mrp_port_del(br, p); |
| br_cfm_port_del(br, p); |
| |
| br_ifinfo_notify(RTM_DELLINK, NULL, p); |
| |
| list_del_rcu(&p->list); |
| if (netdev_get_fwd_headroom(dev) == br->dev->needed_headroom) |
| update_headroom(br, get_max_headroom(br)); |
| netdev_reset_rx_headroom(dev); |
| |
| nbp_vlan_flush(p); |
| br_fdb_delete_by_port(br, p, 0, 1); |
| switchdev_deferred_process(); |
| nbp_backup_clear(p); |
| |
| nbp_update_port_count(br); |
| |
| netdev_upper_dev_unlink(dev, br->dev); |
| |
| dev->priv_flags &= ~IFF_BRIDGE_PORT; |
| |
| netdev_rx_handler_unregister(dev); |
| |
| br_multicast_del_port(p); |
| |
| kobject_uevent(&p->kobj, KOBJ_REMOVE); |
| kobject_del(&p->kobj); |
| |
| br_netpoll_disable(p); |
| |
| call_rcu(&p->rcu, destroy_nbp_rcu); |
| } |
| |
| /* Delete bridge device */ |
| void br_dev_delete(struct net_device *dev, struct list_head *head) |
| { |
| struct net_bridge *br = netdev_priv(dev); |
| struct net_bridge_port *p, *n; |
| |
| list_for_each_entry_safe(p, n, &br->port_list, list) { |
| del_nbp(p); |
| } |
| |
| br_recalculate_neigh_suppress_enabled(br); |
| |
| br_fdb_delete_by_port(br, NULL, 0, 1); |
| |
| cancel_delayed_work_sync(&br->gc_work); |
| |
| br_sysfs_delbr(br->dev); |
| unregister_netdevice_queue(br->dev, head); |
| } |
| |
| /* find an available port number */ |
| static int find_portno(struct net_bridge *br) |
| { |
| int index; |
| struct net_bridge_port *p; |
| unsigned long *inuse; |
| |
| inuse = bitmap_zalloc(BR_MAX_PORTS, GFP_KERNEL); |
| if (!inuse) |
| return -ENOMEM; |
| |
| __set_bit(0, inuse); /* zero is reserved */ |
| list_for_each_entry(p, &br->port_list, list) |
| __set_bit(p->port_no, inuse); |
| |
| index = find_first_zero_bit(inuse, BR_MAX_PORTS); |
| bitmap_free(inuse); |
| |
| return (index >= BR_MAX_PORTS) ? -EXFULL : index; |
| } |
| |
| /* called with RTNL but without bridge lock */ |
| static struct net_bridge_port *new_nbp(struct net_bridge *br, |
| struct net_device *dev) |
| { |
| struct net_bridge_port *p; |
| int index, err; |
| |
| index = find_portno(br); |
| if (index < 0) |
| return ERR_PTR(index); |
| |
| p = kzalloc(sizeof(*p), GFP_KERNEL); |
| if (p == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| p->br = br; |
| netdev_hold(dev, &p->dev_tracker, GFP_KERNEL); |
| p->dev = dev; |
| p->path_cost = port_cost(dev); |
| p->priority = 0x8000 >> BR_PORT_BITS; |
| p->port_no = index; |
| p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD; |
| br_init_port(p); |
| br_set_state(p, BR_STATE_DISABLED); |
| br_stp_port_timer_init(p); |
| err = br_multicast_add_port(p); |
| if (err) { |
| netdev_put(dev, &p->dev_tracker); |
| kfree(p); |
| p = ERR_PTR(err); |
| } |
| |
| return p; |
| } |
| |
| int br_add_bridge(struct net *net, const char *name) |
| { |
| struct net_device *dev; |
| int res; |
| |
| dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN, |
| br_dev_setup); |
| |
| if (!dev) |
| return -ENOMEM; |
| |
| dev_net_set(dev, net); |
| dev->rtnl_link_ops = &br_link_ops; |
| |
| res = register_netdevice(dev); |
| if (res) |
| free_netdev(dev); |
| return res; |
| } |
| |
| int br_del_bridge(struct net *net, const char *name) |
| { |
| struct net_device *dev; |
| int ret = 0; |
| |
| dev = __dev_get_by_name(net, name); |
| if (dev == NULL) |
| ret = -ENXIO; /* Could not find device */ |
| |
| else if (!netif_is_bridge_master(dev)) { |
| /* Attempt to delete non bridge device! */ |
| ret = -EPERM; |
| } |
| |
| else if (dev->flags & IFF_UP) { |
| /* Not shutdown yet. */ |
| ret = -EBUSY; |
| } |
| |
| else |
| br_dev_delete(dev, NULL); |
| |
| return ret; |
| } |
| |
| /* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */ |
| static int br_mtu_min(const struct net_bridge *br) |
| { |
| const struct net_bridge_port *p; |
| int ret_mtu = 0; |
| |
| list_for_each_entry(p, &br->port_list, list) |
| if (!ret_mtu || ret_mtu > p->dev->mtu) |
| ret_mtu = p->dev->mtu; |
| |
| return ret_mtu ? ret_mtu : ETH_DATA_LEN; |
| } |
| |
| void br_mtu_auto_adjust(struct net_bridge *br) |
| { |
| ASSERT_RTNL(); |
| |
| /* if the bridge MTU was manually configured don't mess with it */ |
| if (br_opt_get(br, BROPT_MTU_SET_BY_USER)) |
| return; |
| |
| /* change to the minimum MTU and clear the flag which was set by |
| * the bridge ndo_change_mtu callback |
| */ |
| dev_set_mtu(br->dev, br_mtu_min(br)); |
| br_opt_toggle(br, BROPT_MTU_SET_BY_USER, false); |
| } |
| |
| static void br_set_gso_limits(struct net_bridge *br) |
| { |
| unsigned int tso_max_size = TSO_MAX_SIZE; |
| const struct net_bridge_port *p; |
| u16 tso_max_segs = TSO_MAX_SEGS; |
| |
| list_for_each_entry(p, &br->port_list, list) { |
| tso_max_size = min(tso_max_size, p->dev->tso_max_size); |
| tso_max_segs = min(tso_max_segs, p->dev->tso_max_segs); |
| } |
| netif_set_tso_max_size(br->dev, tso_max_size); |
| netif_set_tso_max_segs(br->dev, tso_max_segs); |
| } |
| |
| /* |
| * Recomputes features using slave's features |
| */ |
| netdev_features_t br_features_recompute(struct net_bridge *br, |
| netdev_features_t features) |
| { |
| struct net_bridge_port *p; |
| netdev_features_t mask; |
| |
| if (list_empty(&br->port_list)) |
| return features; |
| |
| mask = features; |
| features &= ~NETIF_F_ONE_FOR_ALL; |
| |
| list_for_each_entry(p, &br->port_list, list) { |
| features = netdev_increment_features(features, |
| p->dev->features, mask); |
| } |
| features = netdev_add_tso_features(features, mask); |
| |
| return features; |
| } |
| |
| /* called with RTNL */ |
| int br_add_if(struct net_bridge *br, struct net_device *dev, |
| struct netlink_ext_ack *extack) |
| { |
| struct net_bridge_port *p; |
| int err = 0; |
| unsigned br_hr, dev_hr; |
| bool changed_addr, fdb_synced = false; |
| |
| /* Don't allow bridging non-ethernet like devices. */ |
| if ((dev->flags & IFF_LOOPBACK) || |
| dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN || |
| !is_valid_ether_addr(dev->dev_addr)) |
| return -EINVAL; |
| |
| /* No bridging of bridges */ |
| if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) { |
| NL_SET_ERR_MSG(extack, |
| "Can not enslave a bridge to a bridge"); |
| return -ELOOP; |
| } |
| |
| /* Device has master upper dev */ |
| if (netdev_master_upper_dev_get(dev)) |
| return -EBUSY; |
| |
| /* No bridging devices that dislike that (e.g. wireless) */ |
| if (dev->priv_flags & IFF_DONT_BRIDGE) { |
| NL_SET_ERR_MSG(extack, |
| "Device does not allow enslaving to a bridge"); |
| return -EOPNOTSUPP; |
| } |
| |
| p = new_nbp(br, dev); |
| if (IS_ERR(p)) |
| return PTR_ERR(p); |
| |
| call_netdevice_notifiers(NETDEV_JOIN, dev); |
| |
| err = dev_set_allmulti(dev, 1); |
| if (err) { |
| br_multicast_del_port(p); |
| netdev_put(dev, &p->dev_tracker); |
| kfree(p); /* kobject not yet init'd, manually free */ |
| goto err1; |
| } |
| |
| err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj), |
| SYSFS_BRIDGE_PORT_ATTR); |
| if (err) |
| goto err2; |
| |
| err = br_sysfs_addif(p); |
| if (err) |
| goto err2; |
| |
| err = br_netpoll_enable(p); |
| if (err) |
| goto err3; |
| |
| err = netdev_rx_handler_register(dev, br_get_rx_handler(dev), p); |
| if (err) |
| goto err4; |
| |
| dev->priv_flags |= IFF_BRIDGE_PORT; |
| |
| err = netdev_master_upper_dev_link(dev, br->dev, NULL, NULL, extack); |
| if (err) |
| goto err5; |
| |
| dev_disable_lro(dev); |
| |
| list_add_rcu(&p->list, &br->port_list); |
| |
| nbp_update_port_count(br); |
| if (!br_promisc_port(p) && (p->dev->priv_flags & IFF_UNICAST_FLT)) { |
| /* When updating the port count we also update all ports' |
| * promiscuous mode. |
| * A port leaving promiscuous mode normally gets the bridge's |
| * fdb synced to the unicast filter (if supported), however, |
| * `br_port_clear_promisc` does not distinguish between |
| * non-promiscuous ports and *new* ports, so we need to |
| * sync explicitly here. |
| */ |
| fdb_synced = br_fdb_sync_static(br, p) == 0; |
| if (!fdb_synced) |
| netdev_err(dev, "failed to sync bridge static fdb addresses to this port\n"); |
| } |
| |
| netdev_update_features(br->dev); |
| |
| br_hr = br->dev->needed_headroom; |
| dev_hr = netdev_get_fwd_headroom(dev); |
| if (br_hr < dev_hr) |
| update_headroom(br, dev_hr); |
| else |
| netdev_set_rx_headroom(dev, br_hr); |
| |
| if (br_fdb_add_local(br, p, dev->dev_addr, 0)) |
| netdev_err(dev, "failed insert local address bridge forwarding table\n"); |
| |
| if (br->dev->addr_assign_type != NET_ADDR_SET) { |
| /* Ask for permission to use this MAC address now, even if we |
| * don't end up choosing it below. |
| */ |
| err = dev_pre_changeaddr_notify(br->dev, dev->dev_addr, extack); |
| if (err) |
| goto err6; |
| } |
| |
| err = nbp_vlan_init(p, extack); |
| if (err) { |
| netdev_err(dev, "failed to initialize vlan filtering on this port\n"); |
| goto err6; |
| } |
| |
| spin_lock_bh(&br->lock); |
| changed_addr = br_stp_recalculate_bridge_id(br); |
| |
| if (netif_running(dev) && netif_oper_up(dev) && |
| (br->dev->flags & IFF_UP)) |
| br_stp_enable_port(p); |
| spin_unlock_bh(&br->lock); |
| |
| br_ifinfo_notify(RTM_NEWLINK, NULL, p); |
| |
| if (changed_addr) |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); |
| |
| br_mtu_auto_adjust(br); |
| br_set_gso_limits(br); |
| |
| kobject_uevent(&p->kobj, KOBJ_ADD); |
| |
| return 0; |
| |
| err6: |
| if (fdb_synced) |
| br_fdb_unsync_static(br, p); |
| list_del_rcu(&p->list); |
| br_fdb_delete_by_port(br, p, 0, 1); |
| nbp_update_port_count(br); |
| netdev_upper_dev_unlink(dev, br->dev); |
| err5: |
| dev->priv_flags &= ~IFF_BRIDGE_PORT; |
| netdev_rx_handler_unregister(dev); |
| err4: |
| br_netpoll_disable(p); |
| err3: |
| sysfs_remove_link(br->ifobj, p->dev->name); |
| err2: |
| br_multicast_del_port(p); |
| netdev_put(dev, &p->dev_tracker); |
| kobject_put(&p->kobj); |
| dev_set_allmulti(dev, -1); |
| err1: |
| return err; |
| } |
| |
| /* called with RTNL */ |
| int br_del_if(struct net_bridge *br, struct net_device *dev) |
| { |
| struct net_bridge_port *p; |
| bool changed_addr; |
| |
| p = br_port_get_rtnl(dev); |
| if (!p || p->br != br) |
| return -EINVAL; |
| |
| /* Since more than one interface can be attached to a bridge, |
| * there still maybe an alternate path for netconsole to use; |
| * therefore there is no reason for a NETDEV_RELEASE event. |
| */ |
| del_nbp(p); |
| |
| br_mtu_auto_adjust(br); |
| br_set_gso_limits(br); |
| |
| spin_lock_bh(&br->lock); |
| changed_addr = br_stp_recalculate_bridge_id(br); |
| spin_unlock_bh(&br->lock); |
| |
| if (changed_addr) |
| call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev); |
| |
| netdev_update_features(br->dev); |
| |
| return 0; |
| } |
| |
| void br_port_flags_change(struct net_bridge_port *p, unsigned long mask) |
| { |
| struct net_bridge *br = p->br; |
| |
| if (mask & BR_AUTO_MASK) |
| nbp_update_port_count(br); |
| |
| if (mask & BR_NEIGH_SUPPRESS) |
| br_recalculate_neigh_suppress_enabled(br); |
| } |
| |
| bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag) |
| { |
| struct net_bridge_port *p; |
| |
| p = br_port_get_rtnl_rcu(dev); |
| if (!p) |
| return false; |
| |
| return p->flags & flag; |
| } |
| EXPORT_SYMBOL_GPL(br_port_flag_is_set); |