| /* |
| * Copyright (C) STMicroelectronics 2009 |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> |
| * Author: Sundar Iyer <sundar.iyer@stericsson.com> |
| * |
| * License Terms: GNU General Public License v2 |
| * |
| * PRCM Unit registers |
| */ |
| |
| #ifndef __DB8500_PRCMU_REGS_H |
| #define __DB8500_PRCMU_REGS_H |
| |
| #include <mach/hardware.h> |
| |
| #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end)) |
| |
| #define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \ |
| + _offset) |
| #define PRCM_ACLK_MGT PRCM_CLK_MGT(0x004) |
| #define PRCM_SVACLK_MGT PRCM_CLK_MGT(0x008) |
| #define PRCM_SIACLK_MGT PRCM_CLK_MGT(0x00C) |
| #define PRCM_SGACLK_MGT PRCM_CLK_MGT(0x014) |
| #define PRCM_UARTCLK_MGT PRCM_CLK_MGT(0x018) |
| #define PRCM_MSP02CLK_MGT PRCM_CLK_MGT(0x01C) |
| #define PRCM_I2CCLK_MGT PRCM_CLK_MGT(0x020) |
| #define PRCM_SDMMCCLK_MGT PRCM_CLK_MGT(0x024) |
| #define PRCM_SLIMCLK_MGT PRCM_CLK_MGT(0x028) |
| #define PRCM_PER1CLK_MGT PRCM_CLK_MGT(0x02C) |
| #define PRCM_PER2CLK_MGT PRCM_CLK_MGT(0x030) |
| #define PRCM_PER3CLK_MGT PRCM_CLK_MGT(0x034) |
| #define PRCM_PER5CLK_MGT PRCM_CLK_MGT(0x038) |
| #define PRCM_PER6CLK_MGT PRCM_CLK_MGT(0x03C) |
| #define PRCM_PER7CLK_MGT PRCM_CLK_MGT(0x040) |
| #define PRCM_LCDCLK_MGT PRCM_CLK_MGT(0x044) |
| #define PRCM_BMLCLK_MGT PRCM_CLK_MGT(0x04C) |
| #define PRCM_HSITXCLK_MGT PRCM_CLK_MGT(0x050) |
| #define PRCM_HSIRXCLK_MGT PRCM_CLK_MGT(0x054) |
| #define PRCM_HDMICLK_MGT PRCM_CLK_MGT(0x058) |
| #define PRCM_APEATCLK_MGT PRCM_CLK_MGT(0x05C) |
| #define PRCM_APETRACECLK_MGT PRCM_CLK_MGT(0x060) |
| #define PRCM_MCDECLK_MGT PRCM_CLK_MGT(0x064) |
| #define PRCM_IPI2CCLK_MGT PRCM_CLK_MGT(0x068) |
| #define PRCM_DSIALTCLK_MGT PRCM_CLK_MGT(0x06C) |
| #define PRCM_DMACLK_MGT PRCM_CLK_MGT(0x074) |
| #define PRCM_B2R2CLK_MGT PRCM_CLK_MGT(0x078) |
| #define PRCM_TVCLK_MGT PRCM_CLK_MGT(0x07C) |
| #define PRCM_UNIPROCLK_MGT PRCM_CLK_MGT(0x278) |
| #define PRCM_SSPCLK_MGT PRCM_CLK_MGT(0x280) |
| #define PRCM_RNGCLK_MGT PRCM_CLK_MGT(0x284) |
| #define PRCM_UICCCLK_MGT PRCM_CLK_MGT(0x27C) |
| #define PRCM_MSP1CLK_MGT PRCM_CLK_MGT(0x288) |
| |
| #define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) |
| #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f |
| #define PRCM_ARM_PLLDIVPS_MAX_MASK 0xf |
| |
| #define PRCM_PLLARM_LOCKP (_PRCMU_BASE + 0x0a8) |
| #define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2 |
| |
| #define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) |
| #define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1 |
| |
| #define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) |
| #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1 |
| #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON 0x100 |
| |
| #define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) |
| #define PRCM_A9PL_FORCE_CLKEN (_PRCMU_BASE + 0x19C) |
| #define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) |
| #define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) |
| #define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) |
| #define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) |
| |
| #define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0) |
| #define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1) |
| |
| /* ARM WFI Standby signal register */ |
| #define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) |
| #define PRCM_IOCR (_PRCMU_BASE + 0x310) |
| #define PRCM_IOCR_IOFORCE 0x1 |
| |
| /* CPU mailbox registers */ |
| #define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) |
| #define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) |
| #define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) |
| |
| /* Dual A9 core interrupt management unit registers */ |
| #define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) |
| #define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1 |
| |
| #define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) |
| #define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) |
| #define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) |
| #define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) |
| #define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) |
| #define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) |
| #define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) |
| #define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) |
| #define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) |
| #define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) |
| |
| #define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) |
| #define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1 |
| #define ARM_WAKEUP_MODEM 0x1 |
| |
| #define PRCM_ARM_IT1_CLR (_PRCMU_BASE + 0x48C) |
| #define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) |
| #define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) |
| |
| #define PRCM_MOD_AWAKE_STATUS (_PRCMU_BASE + 0x4A0) |
| #define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE BIT(0) |
| #define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE BIT(1) |
| #define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO BIT(2) |
| |
| #define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) |
| #define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) |
| #define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) |
| #define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) |
| #define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) |
| #define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) |
| #define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) |
| #define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) |
| |
| /* System reset register */ |
| #define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) |
| |
| /* Level shifter and clamp control registers */ |
| #define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) |
| #define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) |
| |
| #define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP BIT(11) |
| #define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI BIT(22) |
| |
| /* PRCMU clock/PLL/reset registers */ |
| #define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080) |
| #define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084) |
| #define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C) |
| #define PRCM_PLL_FREQ_D_SHIFT 0 |
| #define PRCM_PLL_FREQ_D_MASK BITS(0, 7) |
| #define PRCM_PLL_FREQ_N_SHIFT 8 |
| #define PRCM_PLL_FREQ_N_MASK BITS(8, 13) |
| #define PRCM_PLL_FREQ_R_SHIFT 16 |
| #define PRCM_PLL_FREQ_R_MASK BITS(16, 18) |
| #define PRCM_PLL_FREQ_SELDIV2 BIT(24) |
| #define PRCM_PLL_FREQ_DIV2EN BIT(25) |
| |
| #define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) |
| #define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) |
| #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) |
| #define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) |
| #define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) |
| #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) |
| #define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) |
| #define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) |
| |
| #define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0) |
| |
| #define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 BIT(0) |
| #define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3 BIT(1) |
| |
| #define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT 0 |
| #define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK BITS(0, 2) |
| #define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT 8 |
| #define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK BITS(8, 10) |
| |
| #define PRCM_DSI_PLLOUT_SEL_OFF 0 |
| #define PRCM_DSI_PLLOUT_SEL_PHI 1 |
| #define PRCM_DSI_PLLOUT_SEL_PHI_2 2 |
| #define PRCM_DSI_PLLOUT_SEL_PHI_4 3 |
| |
| #define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT 0 |
| #define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK BITS(0, 7) |
| #define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT 8 |
| #define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK BITS(8, 15) |
| #define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT 16 |
| #define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK BITS(16, 23) |
| #define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN BIT(24) |
| #define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN BIT(25) |
| #define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN BIT(26) |
| |
| #define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14) |
| |
| #define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC) |
| #define PRCM_CLKOCR_CLKOUT0_REF_CLK (1 << 0) |
| #define PRCM_CLKOCR_CLKOUT0_MASK BITS(0, 13) |
| #define PRCM_CLKOCR_CLKOUT1_REF_CLK (1 << 16) |
| #define PRCM_CLKOCR_CLKOUT1_MASK BITS(16, 29) |
| |
| /* ePOD and memory power signal control registers */ |
| #define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) |
| #define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) |
| |
| /* Debug power control unit registers */ |
| #define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) |
| |
| /* Miscellaneous unit registers */ |
| #define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) |
| #define PRCM_GPIOCR (_PRCMU_BASE + 0x138) |
| #define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800 |
| #define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1 |
| |
| /* PRCMU HW semaphore */ |
| #define PRCM_SEM (_PRCMU_BASE + 0x400) |
| #define PRCM_SEM_PRCM_SEM BIT(0) |
| |
| #define PRCM_TCR (_PRCMU_BASE + 0x1C8) |
| #define PRCM_TCR_TENSEL_MASK BITS(0, 7) |
| #define PRCM_TCR_STOP_TIMERS BIT(16) |
| #define PRCM_TCR_DOZE_MODE BIT(17) |
| |
| #define PRCM_CLKOCR_CLKODIV0_SHIFT 0 |
| #define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5) |
| #define PRCM_CLKOCR_CLKOSEL0_SHIFT 6 |
| #define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8) |
| #define PRCM_CLKOCR_CLKODIV1_SHIFT 16 |
| #define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21) |
| #define PRCM_CLKOCR_CLKOSEL1_SHIFT 22 |
| #define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24) |
| #define PRCM_CLKOCR_CLK1TYPE BIT(28) |
| |
| #define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) |
| #define PRCM_CLK_MGT_CLKPLLSW_SOC0 BIT(5) |
| #define PRCM_CLK_MGT_CLKPLLSW_SOC1 BIT(6) |
| #define PRCM_CLK_MGT_CLKPLLSW_DDR BIT(7) |
| #define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) |
| #define PRCM_CLK_MGT_CLKEN BIT(8) |
| #define PRCM_CLK_MGT_CLK38 BIT(9) |
| #define PRCM_CLK_MGT_CLK38DIV BIT(11) |
| #define PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN BIT(12) |
| |
| /* GPIOCR register */ |
| #define PRCM_GPIOCR_SPI2_SELECT BIT(23) |
| |
| #define PRCM_DDR_SUBSYS_APE_MINBW (_PRCMU_BASE + 0x438) |
| #define PRCM_CGATING_BYPASS (_PRCMU_BASE + 0x134) |
| #define PRCM_CGATING_BYPASS_ICN2 BIT(6) |
| |
| /* Miscellaneous unit registers */ |
| #define PRCM_RESOUTN_SET (_PRCMU_BASE + 0x214) |
| #define PRCM_RESOUTN_CLR (_PRCMU_BASE + 0x218) |
| |
| /* System reset register */ |
| #define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) |
| |
| #endif /* __DB8500_PRCMU_REGS_H */ |
