| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for USB webcams based on Konica chipset. This |
| * chipset is used in Intel YC76 camera. |
| * |
| * Copyright (C) 2010 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Based on the usbvideo v4l1 konicawc driver which is: |
| * |
| * Copyright (C) 2002 Simon Evans <spse@secret.org.uk> |
| * |
| * The code for making gspca work with a webcam with 2 isoc endpoints was |
| * taken from the benq gspca subdriver which is: |
| * |
| * Copyright (C) 2009 Jean-Francois Moine (http://moinejf.free.fr) |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define MODULE_NAME "konica" |
| |
| #include <linux/input.h> |
| #include "gspca.h" |
| |
| MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_DESCRIPTION("Konica chipset USB Camera Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #define WHITEBAL_REG 0x01 |
| #define BRIGHTNESS_REG 0x02 |
| #define SHARPNESS_REG 0x03 |
| #define CONTRAST_REG 0x04 |
| #define SATURATION_REG 0x05 |
| |
| /* specific webcam descriptor */ |
| struct sd { |
| struct gspca_dev gspca_dev; /* !! must be the first item */ |
| struct urb *last_data_urb; |
| u8 snapshot_pressed; |
| }; |
| |
| |
| /* .priv is what goes to register 8 for this mode, known working values: |
| 0x00 -> 176x144, cropped |
| 0x01 -> 176x144, cropped |
| 0x02 -> 176x144, cropped |
| 0x03 -> 176x144, cropped |
| 0x04 -> 176x144, binned |
| 0x05 -> 320x240 |
| 0x06 -> 320x240 |
| 0x07 -> 160x120, cropped |
| 0x08 -> 160x120, cropped |
| 0x09 -> 160x120, binned (note has 136 lines) |
| 0x0a -> 160x120, binned (note has 136 lines) |
| 0x0b -> 160x120, cropped |
| */ |
| static const struct v4l2_pix_format vga_mode[] = { |
| {160, 120, V4L2_PIX_FMT_KONICA420, V4L2_FIELD_NONE, |
| .bytesperline = 160, |
| .sizeimage = 160 * 136 * 3 / 2 + 960, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0x0a}, |
| {176, 144, V4L2_PIX_FMT_KONICA420, V4L2_FIELD_NONE, |
| .bytesperline = 176, |
| .sizeimage = 176 * 144 * 3 / 2 + 960, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0x04}, |
| {320, 240, V4L2_PIX_FMT_KONICA420, V4L2_FIELD_NONE, |
| .bytesperline = 320, |
| .sizeimage = 320 * 240 * 3 / 2 + 960, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0x05}, |
| }; |
| |
| static void sd_isoc_irq(struct urb *urb); |
| |
| static void reg_w(struct gspca_dev *gspca_dev, u16 value, u16 index) |
| { |
| struct usb_device *dev = gspca_dev->dev; |
| int ret; |
| |
| if (gspca_dev->usb_err < 0) |
| return; |
| ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| 0x02, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| NULL, |
| 0, |
| 1000); |
| if (ret < 0) { |
| pr_err("reg_w err writing %02x to %02x: %d\n", |
| value, index, ret); |
| gspca_dev->usb_err = ret; |
| } |
| } |
| |
| static void reg_r(struct gspca_dev *gspca_dev, u16 value, u16 index) |
| { |
| struct usb_device *dev = gspca_dev->dev; |
| int ret; |
| |
| if (gspca_dev->usb_err < 0) |
| return; |
| ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), |
| 0x03, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| gspca_dev->usb_buf, |
| 2, |
| 1000); |
| if (ret < 0) { |
| pr_err("reg_r err %d\n", ret); |
| gspca_dev->usb_err = ret; |
| } |
| } |
| |
| static void konica_stream_on(struct gspca_dev *gspca_dev) |
| { |
| reg_w(gspca_dev, 1, 0x0b); |
| } |
| |
| static void konica_stream_off(struct gspca_dev *gspca_dev) |
| { |
| reg_w(gspca_dev, 0, 0x0b); |
| } |
| |
| /* this function is called at probe time */ |
| static int sd_config(struct gspca_dev *gspca_dev, |
| const struct usb_device_id *id) |
| { |
| gspca_dev->cam.cam_mode = vga_mode; |
| gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode); |
| gspca_dev->cam.no_urb_create = 1; |
| |
| return 0; |
| } |
| |
| /* this function is called at probe and resume time */ |
| static int sd_init(struct gspca_dev *gspca_dev) |
| { |
| int i; |
| |
| /* |
| * The konica needs a freaking large time to "boot" (approx 6.5 sec.), |
| * and does not want to be bothered while doing so :| |
| * Register 0x10 counts from 1 - 3, with 3 being "ready" |
| */ |
| msleep(6000); |
| for (i = 0; i < 20; i++) { |
| reg_r(gspca_dev, 0, 0x10); |
| if (gspca_dev->usb_buf[0] == 3) |
| break; |
| msleep(100); |
| } |
| reg_w(gspca_dev, 0, 0x0d); |
| |
| return gspca_dev->usb_err; |
| } |
| |
| static int sd_start(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct urb *urb; |
| int i, n, packet_size; |
| struct usb_host_interface *alt; |
| struct usb_interface *intf; |
| |
| intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); |
| alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); |
| if (!alt) { |
| pr_err("Couldn't get altsetting\n"); |
| return -EIO; |
| } |
| |
| if (alt->desc.bNumEndpoints < 2) |
| return -ENODEV; |
| |
| packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); |
| |
| n = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; |
| reg_w(gspca_dev, n, 0x08); |
| |
| konica_stream_on(gspca_dev); |
| |
| if (gspca_dev->usb_err) |
| return gspca_dev->usb_err; |
| |
| /* create 4 URBs - 2 on endpoint 0x83 and 2 on 0x082 */ |
| #if MAX_NURBS < 4 |
| #error "Not enough URBs in the gspca table" |
| #endif |
| #define SD_NPKT 32 |
| for (n = 0; n < 4; n++) { |
| i = n & 1 ? 0 : 1; |
| packet_size = |
| le16_to_cpu(alt->endpoint[i].desc.wMaxPacketSize); |
| urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL); |
| if (!urb) |
| return -ENOMEM; |
| gspca_dev->urb[n] = urb; |
| urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev, |
| packet_size * SD_NPKT, |
| GFP_KERNEL, |
| &urb->transfer_dma); |
| if (urb->transfer_buffer == NULL) { |
| pr_err("usb_buffer_alloc failed\n"); |
| return -ENOMEM; |
| } |
| |
| urb->dev = gspca_dev->dev; |
| urb->context = gspca_dev; |
| urb->transfer_buffer_length = packet_size * SD_NPKT; |
| urb->pipe = usb_rcvisocpipe(gspca_dev->dev, |
| n & 1 ? 0x81 : 0x82); |
| urb->transfer_flags = URB_ISO_ASAP |
| | URB_NO_TRANSFER_DMA_MAP; |
| urb->interval = 1; |
| urb->complete = sd_isoc_irq; |
| urb->number_of_packets = SD_NPKT; |
| for (i = 0; i < SD_NPKT; i++) { |
| urb->iso_frame_desc[i].length = packet_size; |
| urb->iso_frame_desc[i].offset = packet_size * i; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void sd_stopN(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd __maybe_unused = (struct sd *) gspca_dev; |
| |
| konica_stream_off(gspca_dev); |
| #if IS_ENABLED(CONFIG_INPUT) |
| /* Don't keep the button in the pressed state "forever" if it was |
| pressed when streaming is stopped */ |
| if (sd->snapshot_pressed) { |
| input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); |
| input_sync(gspca_dev->input_dev); |
| sd->snapshot_pressed = 0; |
| } |
| #endif |
| } |
| |
| /* reception of an URB */ |
| static void sd_isoc_irq(struct urb *urb) |
| { |
| struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context; |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct urb *data_urb, *status_urb; |
| u8 *data; |
| int i, st; |
| |
| gspca_dbg(gspca_dev, D_PACK, "sd isoc irq\n"); |
| if (!gspca_dev->streaming) |
| return; |
| |
| if (urb->status != 0) { |
| if (urb->status == -ESHUTDOWN) |
| return; /* disconnection */ |
| #ifdef CONFIG_PM |
| if (gspca_dev->frozen) |
| return; |
| #endif |
| gspca_err(gspca_dev, "urb status: %d\n", urb->status); |
| st = usb_submit_urb(urb, GFP_ATOMIC); |
| if (st < 0) |
| pr_err("resubmit urb error %d\n", st); |
| return; |
| } |
| |
| /* if this is a data URB (ep 0x82), wait */ |
| if (urb->transfer_buffer_length > 32) { |
| sd->last_data_urb = urb; |
| return; |
| } |
| |
| status_urb = urb; |
| data_urb = sd->last_data_urb; |
| sd->last_data_urb = NULL; |
| |
| if (!data_urb || data_urb->start_frame != status_urb->start_frame) { |
| gspca_err(gspca_dev, "lost sync on frames\n"); |
| goto resubmit; |
| } |
| |
| if (data_urb->number_of_packets != status_urb->number_of_packets) { |
| gspca_err(gspca_dev, "no packets does not match, data: %d, status: %d\n", |
| data_urb->number_of_packets, |
| status_urb->number_of_packets); |
| goto resubmit; |
| } |
| |
| for (i = 0; i < status_urb->number_of_packets; i++) { |
| if (data_urb->iso_frame_desc[i].status || |
| status_urb->iso_frame_desc[i].status) { |
| gspca_err(gspca_dev, "pkt %d data-status %d, status-status %d\n", |
| i, |
| data_urb->iso_frame_desc[i].status, |
| status_urb->iso_frame_desc[i].status); |
| gspca_dev->last_packet_type = DISCARD_PACKET; |
| continue; |
| } |
| |
| if (status_urb->iso_frame_desc[i].actual_length != 1) { |
| gspca_err(gspca_dev, "bad status packet length %d\n", |
| status_urb->iso_frame_desc[i].actual_length); |
| gspca_dev->last_packet_type = DISCARD_PACKET; |
| continue; |
| } |
| |
| st = *((u8 *)status_urb->transfer_buffer |
| + status_urb->iso_frame_desc[i].offset); |
| |
| data = (u8 *)data_urb->transfer_buffer |
| + data_urb->iso_frame_desc[i].offset; |
| |
| /* st: 0x80-0xff: frame start with frame number (ie 0-7f) |
| * otherwise: |
| * bit 0 0: keep packet |
| * 1: drop packet (padding data) |
| * |
| * bit 4 0 button not clicked |
| * 1 button clicked |
| * button is used to `take a picture' (in software) |
| */ |
| if (st & 0x80) { |
| gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); |
| gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); |
| } else { |
| #if IS_ENABLED(CONFIG_INPUT) |
| u8 button_state = st & 0x40 ? 1 : 0; |
| if (sd->snapshot_pressed != button_state) { |
| input_report_key(gspca_dev->input_dev, |
| KEY_CAMERA, |
| button_state); |
| input_sync(gspca_dev->input_dev); |
| sd->snapshot_pressed = button_state; |
| } |
| #endif |
| if (st & 0x01) |
| continue; |
| } |
| gspca_frame_add(gspca_dev, INTER_PACKET, data, |
| data_urb->iso_frame_desc[i].actual_length); |
| } |
| |
| resubmit: |
| if (data_urb) { |
| st = usb_submit_urb(data_urb, GFP_ATOMIC); |
| if (st < 0) |
| gspca_err(gspca_dev, "usb_submit_urb(data_urb) ret %d\n", |
| st); |
| } |
| st = usb_submit_urb(status_urb, GFP_ATOMIC); |
| if (st < 0) |
| gspca_err(gspca_dev, "usb_submit_urb(status_urb) ret %d\n", st); |
| } |
| |
| static int sd_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct gspca_dev *gspca_dev = |
| container_of(ctrl->handler, struct gspca_dev, ctrl_handler); |
| |
| gspca_dev->usb_err = 0; |
| |
| if (!gspca_dev->streaming) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| konica_stream_off(gspca_dev); |
| reg_w(gspca_dev, ctrl->val, BRIGHTNESS_REG); |
| konica_stream_on(gspca_dev); |
| break; |
| case V4L2_CID_CONTRAST: |
| konica_stream_off(gspca_dev); |
| reg_w(gspca_dev, ctrl->val, CONTRAST_REG); |
| konica_stream_on(gspca_dev); |
| break; |
| case V4L2_CID_SATURATION: |
| konica_stream_off(gspca_dev); |
| reg_w(gspca_dev, ctrl->val, SATURATION_REG); |
| konica_stream_on(gspca_dev); |
| break; |
| case V4L2_CID_WHITE_BALANCE_TEMPERATURE: |
| konica_stream_off(gspca_dev); |
| reg_w(gspca_dev, ctrl->val, WHITEBAL_REG); |
| konica_stream_on(gspca_dev); |
| break; |
| case V4L2_CID_SHARPNESS: |
| konica_stream_off(gspca_dev); |
| reg_w(gspca_dev, ctrl->val, SHARPNESS_REG); |
| konica_stream_on(gspca_dev); |
| break; |
| } |
| return gspca_dev->usb_err; |
| } |
| |
| static const struct v4l2_ctrl_ops sd_ctrl_ops = { |
| .s_ctrl = sd_s_ctrl, |
| }; |
| |
| static int sd_init_controls(struct gspca_dev *gspca_dev) |
| { |
| struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; |
| |
| gspca_dev->vdev.ctrl_handler = hdl; |
| v4l2_ctrl_handler_init(hdl, 5); |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, 0, 9, 1, 4); |
| /* Needs to be verified */ |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_CONTRAST, 0, 9, 1, 4); |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_SATURATION, 0, 9, 1, 4); |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_WHITE_BALANCE_TEMPERATURE, |
| 0, 33, 1, 25); |
| v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, |
| V4L2_CID_SHARPNESS, 0, 9, 1, 4); |
| |
| if (hdl->error) { |
| pr_err("Could not initialize controls\n"); |
| return hdl->error; |
| } |
| return 0; |
| } |
| |
| /* sub-driver description */ |
| static const struct sd_desc sd_desc = { |
| .name = MODULE_NAME, |
| .config = sd_config, |
| .init = sd_init, |
| .init_controls = sd_init_controls, |
| .start = sd_start, |
| .stopN = sd_stopN, |
| #if IS_ENABLED(CONFIG_INPUT) |
| .other_input = 1, |
| #endif |
| }; |
| |
| /* -- module initialisation -- */ |
| static const struct usb_device_id device_table[] = { |
| {USB_DEVICE(0x04c8, 0x0720)}, /* Intel YC 76 */ |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, device_table); |
| |
| /* -- device connect -- */ |
| static int sd_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), |
| THIS_MODULE); |
| } |
| |
| static struct usb_driver sd_driver = { |
| .name = MODULE_NAME, |
| .id_table = device_table, |
| .probe = sd_probe, |
| .disconnect = gspca_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = gspca_suspend, |
| .resume = gspca_resume, |
| .reset_resume = gspca_resume, |
| #endif |
| }; |
| |
| module_usb_driver(sd_driver); |