| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Support for the sensor part which is integrated (I think) into the |
| * st6422 stv06xx alike bridge, as its integrated there are no i2c writes |
| * but instead direct bridge writes. |
| * |
| * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Strongly based on qc-usb-messenger, which is: |
| * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher |
| * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland |
| * Copyright (c) 2002, 2003 Tuukka Toivonen |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include "stv06xx_st6422.h" |
| |
| static struct v4l2_pix_format st6422_mode[] = { |
| /* Note we actually get 124 lines of data, of which we skip the 4st |
| 4 as they are garbage */ |
| { |
| 162, |
| 120, |
| V4L2_PIX_FMT_SGRBG8, |
| V4L2_FIELD_NONE, |
| .sizeimage = 162 * 120, |
| .bytesperline = 162, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1 |
| }, |
| /* Note we actually get 248 lines of data, of which we skip the 4st |
| 4 as they are garbage, and we tell the app it only gets the |
| first 240 of the 244 lines it actually gets, so that it ignores |
| the last 4. */ |
| { |
| 324, |
| 240, |
| V4L2_PIX_FMT_SGRBG8, |
| V4L2_FIELD_NONE, |
| .sizeimage = 324 * 244, |
| .bytesperline = 324, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0 |
| }, |
| }; |
| |
| /* V4L2 controls supported by the driver */ |
| static int setbrightness(struct sd *sd, s32 val); |
| static int setcontrast(struct sd *sd, s32 val); |
| static int setgain(struct sd *sd, u8 gain); |
| static int setexposure(struct sd *sd, s16 expo); |
| |
| static int st6422_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct gspca_dev *gspca_dev = |
| container_of(ctrl->handler, struct gspca_dev, ctrl_handler); |
| struct sd *sd = (struct sd *)gspca_dev; |
| int err = -EINVAL; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| err = setbrightness(sd, ctrl->val); |
| break; |
| case V4L2_CID_CONTRAST: |
| err = setcontrast(sd, ctrl->val); |
| break; |
| case V4L2_CID_GAIN: |
| err = setgain(sd, ctrl->val); |
| break; |
| case V4L2_CID_EXPOSURE: |
| err = setexposure(sd, ctrl->val); |
| break; |
| } |
| |
| /* commit settings */ |
| if (err >= 0) |
| err = stv06xx_write_bridge(sd, 0x143f, 0x01); |
| sd->gspca_dev.usb_err = err; |
| return err; |
| } |
| |
| static const struct v4l2_ctrl_ops st6422_ctrl_ops = { |
| .s_ctrl = st6422_s_ctrl, |
| }; |
| |
| static int st6422_init_controls(struct sd *sd) |
| { |
| struct v4l2_ctrl_handler *hdl = &sd->gspca_dev.ctrl_handler; |
| |
| v4l2_ctrl_handler_init(hdl, 4); |
| v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, 0, 31, 1, 3); |
| v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, |
| V4L2_CID_CONTRAST, 0, 15, 1, 11); |
| v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, |
| V4L2_CID_EXPOSURE, 0, 1023, 1, 256); |
| v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, |
| V4L2_CID_GAIN, 0, 255, 1, 64); |
| |
| return hdl->error; |
| } |
| |
| static int st6422_probe(struct sd *sd) |
| { |
| if (sd->bridge != BRIDGE_ST6422) |
| return -ENODEV; |
| |
| pr_info("st6422 sensor detected\n"); |
| |
| sd->gspca_dev.cam.cam_mode = st6422_mode; |
| sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode); |
| return 0; |
| } |
| |
| static int st6422_init(struct sd *sd) |
| { |
| int err = 0, i; |
| |
| const u16 st6422_bridge_init[][2] = { |
| { STV_ISO_ENABLE, 0x00 }, /* disable capture */ |
| { 0x1436, 0x00 }, |
| { 0x1432, 0x03 }, /* 0x00-0x1F brightness */ |
| { 0x143a, 0xf9 }, /* 0x00-0x0F contrast */ |
| { 0x0509, 0x38 }, /* R */ |
| { 0x050a, 0x38 }, /* G */ |
| { 0x050b, 0x38 }, /* B */ |
| { 0x050c, 0x2a }, |
| { 0x050d, 0x01 }, |
| |
| |
| { 0x1431, 0x00 }, /* 0x00-0x07 ??? */ |
| { 0x1433, 0x34 }, /* 160x120, 0x00-0x01 night filter */ |
| { 0x1438, 0x18 }, /* 640x480 */ |
| /* 18 bayes */ |
| /* 10 compressed? */ |
| |
| { 0x1439, 0x00 }, |
| /* anti-noise? 0xa2 gives a perfect image */ |
| |
| { 0x143b, 0x05 }, |
| { 0x143c, 0x00 }, /* 0x00-0x01 - ??? */ |
| |
| |
| /* shutter time 0x0000-0x03FF */ |
| /* low value give good picures on moving objects (but requires much light) */ |
| /* high value gives good picures in darkness (but tends to be overexposed) */ |
| { 0x143e, 0x01 }, |
| { 0x143d, 0x00 }, |
| |
| { 0x1442, 0xe2 }, |
| /* write: 1x1x xxxx */ |
| /* read: 1x1x xxxx */ |
| /* bit 5 == button pressed and hold if 0 */ |
| /* write 0xe2,0xea */ |
| |
| /* 0x144a */ |
| /* 0x00 init */ |
| /* bit 7 == button has been pressed, but not handled */ |
| |
| /* interrupt */ |
| /* if(urb->iso_frame_desc[i].status == 0x80) { */ |
| /* if(urb->iso_frame_desc[i].status == 0x88) { */ |
| |
| { 0x1500, 0xd0 }, |
| { 0x1500, 0xd0 }, |
| { 0x1500, 0x50 }, /* 0x00 - 0xFF 0x80 == compr ? */ |
| |
| { 0x1501, 0xaf }, |
| /* high val-> light area gets darker */ |
| /* low val -> light area gets lighter */ |
| { 0x1502, 0xc2 }, |
| /* high val-> light area gets darker */ |
| /* low val -> light area gets lighter */ |
| { 0x1503, 0x45 }, |
| /* high val-> light area gets darker */ |
| /* low val -> light area gets lighter */ |
| { 0x1505, 0x02 }, |
| /* 2 : 324x248 80352 bytes */ |
| /* 7 : 248x162 40176 bytes */ |
| /* c+f: 162*124 20088 bytes */ |
| |
| { 0x150e, 0x8e }, |
| { 0x150f, 0x37 }, |
| { 0x15c0, 0x00 }, |
| { 0x15c3, 0x08 }, /* 0x04/0x14 ... test pictures ??? */ |
| |
| |
| { 0x143f, 0x01 }, /* commit settings */ |
| |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) { |
| err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0], |
| st6422_bridge_init[i][1]); |
| } |
| |
| return err; |
| } |
| |
| static int setbrightness(struct sd *sd, s32 val) |
| { |
| /* val goes from 0 -> 31 */ |
| return stv06xx_write_bridge(sd, 0x1432, val); |
| } |
| |
| static int setcontrast(struct sd *sd, s32 val) |
| { |
| /* Val goes from 0 -> 15 */ |
| return stv06xx_write_bridge(sd, 0x143a, val | 0xf0); |
| } |
| |
| static int setgain(struct sd *sd, u8 gain) |
| { |
| int err; |
| |
| /* Set red, green, blue, gain */ |
| err = stv06xx_write_bridge(sd, 0x0509, gain); |
| if (err < 0) |
| return err; |
| |
| err = stv06xx_write_bridge(sd, 0x050a, gain); |
| if (err < 0) |
| return err; |
| |
| err = stv06xx_write_bridge(sd, 0x050b, gain); |
| if (err < 0) |
| return err; |
| |
| /* 2 mystery writes */ |
| err = stv06xx_write_bridge(sd, 0x050c, 0x2a); |
| if (err < 0) |
| return err; |
| |
| return stv06xx_write_bridge(sd, 0x050d, 0x01); |
| } |
| |
| static int setexposure(struct sd *sd, s16 expo) |
| { |
| int err; |
| |
| err = stv06xx_write_bridge(sd, 0x143d, expo & 0xff); |
| if (err < 0) |
| return err; |
| |
| return stv06xx_write_bridge(sd, 0x143e, expo >> 8); |
| } |
| |
| static int st6422_start(struct sd *sd) |
| { |
| int err; |
| struct cam *cam = &sd->gspca_dev.cam; |
| |
| if (cam->cam_mode[sd->gspca_dev.curr_mode].priv) |
| err = stv06xx_write_bridge(sd, 0x1505, 0x0f); |
| else |
| err = stv06xx_write_bridge(sd, 0x1505, 0x02); |
| if (err < 0) |
| return err; |
| |
| /* commit settings */ |
| err = stv06xx_write_bridge(sd, 0x143f, 0x01); |
| return (err < 0) ? err : 0; |
| } |
| |
| static int st6422_stop(struct sd *sd) |
| { |
| struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; |
| |
| gspca_dbg(gspca_dev, D_STREAM, "Halting stream\n"); |
| |
| return 0; |
| } |