| /* |
| * platform_bcm43xx.c: bcm43xx platform data initilization file |
| * |
| * (C) Copyright 2016 Intel Corporation |
| * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; version 2 |
| * of the License. |
| */ |
| |
| #include <linux/gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/sfi.h> |
| |
| #include <asm/intel-mid.h> |
| |
| #define WLAN_SFI_GPIO_IRQ_NAME "WLAN-interrupt" |
| #define WLAN_SFI_GPIO_ENABLE_NAME "WLAN-enable" |
| |
| #define WLAN_DEV_NAME "0000:00:01.3" |
| |
| static struct regulator_consumer_supply bcm43xx_vmmc_supply = { |
| .dev_name = WLAN_DEV_NAME, |
| .supply = "vmmc", |
| }; |
| |
| static struct regulator_init_data bcm43xx_vmmc_data = { |
| .constraints = { |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = 1, |
| .consumer_supplies = &bcm43xx_vmmc_supply, |
| }; |
| |
| static struct fixed_voltage_config bcm43xx_vmmc = { |
| .supply_name = "bcm43xx-vmmc-regulator", |
| /* |
| * Announce 2.0V here to be compatible with SDIO specification. The |
| * real voltage and signaling are still 1.8V. |
| */ |
| .microvolts = 2000000, /* 1.8V */ |
| .gpio = -EINVAL, |
| .startup_delay = 250 * 1000, /* 250ms */ |
| .enable_high = 1, /* active high */ |
| .enabled_at_boot = 0, /* disabled at boot */ |
| .init_data = &bcm43xx_vmmc_data, |
| }; |
| |
| static struct platform_device bcm43xx_vmmc_regulator = { |
| .name = "reg-fixed-voltage", |
| .id = PLATFORM_DEVID_AUTO, |
| .dev = { |
| .platform_data = &bcm43xx_vmmc, |
| }, |
| }; |
| |
| static int __init bcm43xx_regulator_register(void) |
| { |
| int ret; |
| |
| bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME); |
| ret = platform_device_register(&bcm43xx_vmmc_regulator); |
| if (ret) { |
| pr_err("%s: vmmc regulator register failed\n", __func__); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void __init *bcm43xx_platform_data(void *info) |
| { |
| int ret; |
| |
| ret = bcm43xx_regulator_register(); |
| if (ret) |
| return NULL; |
| |
| pr_info("Using generic wifi platform data\n"); |
| |
| /* For now it's empty */ |
| return NULL; |
| } |
| |
| static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = { |
| .name = "bcm43xx_clk_vmmc", |
| .type = SFI_DEV_TYPE_SD, |
| .get_platform_data = &bcm43xx_platform_data, |
| }; |
| |
| sfi_device(bcm43xx_clk_vmmc_dev_id); |