arch/arm/boot/dts/hip04.dtsi

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Hisilicon Ltd. HiP04 SoC
 *
 * Copyright (C) 2013-2014 Hisilicon Ltd.
 * Copyright (C) 2013-2014 Linaro Ltd.
 *
 * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
 */

/ {
	/* memory bus is 64-bit */
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		serial0 = &uart0;
	};

	bootwrapper {
		compatible = "hisilicon,hip04-bootwrapper";
		boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU0>;
				};
				core1 {
					cpu = <&CPU1>;
				};
				core2 {
					cpu = <&CPU2>;
				};
				core3 {
					cpu = <&CPU3>;
				};
			};
			cluster1 {
				core0 {
					cpu = <&CPU4>;
				};
				core1 {
					cpu = <&CPU5>;
				};
				core2 {
					cpu = <&CPU6>;
				};
				core3 {
					cpu = <&CPU7>;
				};
			};
			cluster2 {
				core0 {
					cpu = <&CPU8>;
				};
				core1 {
					cpu = <&CPU9>;
				};
				core2 {
					cpu = <&CPU10>;
				};
				core3 {
					cpu = <&CPU11>;
				};
			};
			cluster3 {
				core0 {
					cpu = <&CPU12>;
				};
				core1 {
					cpu = <&CPU13>;
				};
				core2 {
					cpu = <&CPU14>;
				};
				core3 {
					cpu = <&CPU15>;
				};
			};
		};
		CPU0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0>;
		};
		CPU1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <1>;
		};
		CPU2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <2>;
		};
		CPU3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <3>;
		};
		CPU4: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x100>;
		};
		CPU5: cpu@101 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x101>;
		};
		CPU6: cpu@102 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x102>;
		};
		CPU7: cpu@103 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x103>;
		};
		CPU8: cpu@200 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x200>;
		};
		CPU9: cpu@201 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x201>;
		};
		CPU10: cpu@202 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x202>;
		};
		CPU11: cpu@203 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x203>;
		};
		CPU12: cpu@300 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x300>;
		};
		CPU13: cpu@301 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x301>;
		};
		CPU14: cpu@302 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x302>;
		};
		CPU15: cpu@303 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0x303>;
		};
	};

	timer {
		compatible = "arm,armv7-timer";
		interrupt-parent = <&gic>;
		interrupts = <1 13 0xf08>,
			     <1 14 0xf08>,
			     <1 11 0xf08>,
			     <1 10 0xf08>;
	};

	clk_50m: clk_50m {
		#clock-cells = <0>;
		compatible = "fixed-clock";
		clock-frequency = <50000000>;
	};

	clk_168m: clk_168m {
		#clock-cells = <0>;
		compatible = "fixed-clock";
		clock-frequency = <168000000>;
	};

	clk_375m: clk_375m {
		#clock-cells = <0>;
		compatible = "fixed-clock";
		clock-frequency = <375000000>;
	};

	soc {
		/* It's a 32-bit SoC. */
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&gic>;
		ranges = <0 0 0xe0000000 0x10000000>;

		gic: interrupt-controller@c01000 {
			compatible = "hisilicon,hip04-intc";
			#interrupt-cells = <3>;
			#address-cells = <0>;
			interrupt-controller;
			interrupts = <1 9 0xf04>;

			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
			      <0xc04000 0x2000>, <0xc06000 0x2000>;
		};

		sysctrl: sysctrl {
			compatible = "hisilicon,sysctrl", "syscon";
			reg = <0x3e00000 0x00100000>;
		};

		fabric: fabric {
			compatible = "hisilicon,hip04-fabric";
			reg = <0x302a000 0x1000>;
		};

		dual_timer0: dual_timer@3000000 {
			compatible = "arm,sp804", "arm,primecell";
			reg = <0x3000000 0x1000>;
			interrupts = <0 224 4>;
			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
			clock-names = "timer0clk", "timer1clk", "apb_pclk";
		};

		arm-pmu {
			compatible = "arm,cortex-a15-pmu";
			interrupts = <0 64 4>,
				     <0 65 4>,
				     <0 66 4>,
				     <0 67 4>,
				     <0 68 4>,
				     <0 69 4>,
				     <0 70 4>,
				     <0 71 4>,
				     <0 72 4>,
				     <0 73 4>,
				     <0 74 4>,
				     <0 75 4>,
				     <0 76 4>,
				     <0 77 4>,
				     <0 78 4>,
				     <0 79 4>;
		};

		uart0: serial@4007000 {
			compatible = "snps,dw-apb-uart";
			reg = <0x4007000 0x1000>;
			interrupts = <0 381 4>;
			clocks = <&clk_168m>, <&clk_168m>;
			clock-names = "baudclk", "apb_pclk";
			reg-shift = <2>;
			status = "disabled";
		};

		sata0: sata@a000000 {
			compatible = "hisilicon,hisi-ahci";
			reg = <0xa000000 0x1000000>;
			interrupts = <0 372 4>;
		};

	};

	etb@0,e3c42000 {
		compatible = "arm,coresight-etb10", "arm,primecell";
		reg = <0 0xe3c42000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		in-ports {
			port {
				etb0_in_port: endpoint@0 {
					remote-endpoint = <&replicator0_out_port0>;
				};
			};
		};
	};

	etb@0,e3c82000 {
		compatible = "arm,coresight-etb10", "arm,primecell";
		reg = <0 0xe3c82000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		in-ports {
			port {
				etb1_in_port: endpoint@0 {
					remote-endpoint = <&replicator1_out_port0>;
				};
			};
		};
	};

	etb@0,e3cc2000 {
		compatible = "arm,coresight-etb10", "arm,primecell";
		reg = <0 0xe3cc2000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		in-ports {
			port {
				etb2_in_port: endpoint@0 {
					remote-endpoint = <&replicator2_out_port0>;
				};
			};
		};
	};

	etb@0,e3d02000 {
		compatible = "arm,coresight-etb10", "arm,primecell";
		reg = <0 0xe3d02000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		in-ports {
			port {
				etb3_in_port: endpoint@0 {
					remote-endpoint = <&replicator3_out_port0>;
				};
			};
		};
	};

	tpiu@0,e3c05000 {
		compatible = "arm,coresight-tpiu", "arm,primecell";
		reg = <0 0xe3c05000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		in-ports {
			port {
				tpiu_in_port: endpoint@0 {
					remote-endpoint = <&funnel4_out_port0>;
				};
			};
		};
	};

	replicator0 {
		/* non-configurable replicators don't show up on the
		 * AMBA bus.  As such no need to add "arm,primecell".
		 */
		compatible = "arm,coresight-static-replicator";

		out-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			/* replicator output ports */
			port@0 {
				reg = <0>;
				replicator0_out_port0: endpoint {
					remote-endpoint = <&etb0_in_port>;
				};
			};

			port@1 {
				reg = <1>;
				replicator0_out_port1: endpoint {
					remote-endpoint = <&funnel4_in_port0>;
				};
			};
		};

		in-ports {
			port {
				replicator0_in_port0: endpoint {
					remote-endpoint = <&funnel0_out_port0>;
				};
			};
		};
	};

	replicator1 {
		/* non-configurable replicators don't show up on the
		 * AMBA bus.  As such no need to add "arm,primecell".
		 */
		compatible = "arm,coresight-static-replicator";

		out-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			/* replicator output ports */
			port@0 {
				reg = <0>;
				replicator1_out_port0: endpoint {
					remote-endpoint = <&etb1_in_port>;
				};
			};

			port@1 {
				reg = <1>;
				replicator1_out_port1: endpoint {
					remote-endpoint = <&funnel4_in_port1>;
				};
			};
		};

		in-ports {
			port {
				replicator1_in_port0: endpoint {
					remote-endpoint = <&funnel1_out_port0>;
				};
			};
		};
	};

	replicator2 {
		/* non-configurable replicators don't show up on the
		 * AMBA bus.  As such no need to add "arm,primecell".
		 */
		compatible = "arm,coresight-static-replicator";

		out-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				replicator2_out_port0: endpoint {
					remote-endpoint = <&etb2_in_port>;
				};
			};

			port@1 {
				reg = <1>;
					replicator2_out_port1: endpoint {
					remote-endpoint = <&funnel4_in_port2>;
				};
			};
		};

		in-ports {
			port {
				replicator2_in_port0: endpoint {
					remote-endpoint = <&funnel2_out_port0>;
				};
			};
		};
	};

	replicator3 {
		/* non-configurable replicators don't show up on the
		 * AMBA bus.  As such no need to add "arm,primecell".
		 */
		compatible = "arm,coresight-static-replicator";

		out-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				replicator3_out_port0: endpoint {
					remote-endpoint = <&etb3_in_port>;
				};
			};

			port@1 {
				reg = <1>;
				replicator3_out_port1: endpoint {
					remote-endpoint = <&funnel4_in_port3>;
				};
			};
		};

		in-ports {
			port {
				replicator3_in_port0: endpoint {
					remote-endpoint = <&funnel3_out_port0>;
				};
			};
		};
	};

	funnel@0,e3c41000 {
		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
		reg = <0 0xe3c41000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		out-ports {
			port {
				funnel0_out_port0: endpoint {
					remote-endpoint =
						<&replicator0_in_port0>;
				};
			};
		};

		in-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				funnel0_in_port0: endpoint {
					remote-endpoint = <&ptm0_out_port>;
				};
			};

			port@1 {
				reg = <1>;
				funnel0_in_port1: endpoint {
					remote-endpoint = <&ptm1_out_port>;
				};
			};

			port@2 {
				reg = <2>;
				funnel0_in_port2: endpoint {
					remote-endpoint = <&ptm2_out_port>;
				};
			};

			port@3 {
				reg = <3>;
				funnel0_in_port3: endpoint {
					remote-endpoint = <&ptm3_out_port>;
				};
			};
		};
	};

	funnel@0,e3c81000 {
		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
		reg = <0 0xe3c81000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		out-ports {
			port {
				funnel1_out_port0: endpoint {
					remote-endpoint =
						<&replicator1_in_port0>;
				};
			};
		};

		in-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				funnel1_in_port0: endpoint {
					remote-endpoint = <&ptm4_out_port>;
				};
			};

			port@1 {
				reg = <1>;
				funnel1_in_port1: endpoint {
					remote-endpoint = <&ptm5_out_port>;
				};
			};

			port@2 {
				reg = <2>;
				funnel1_in_port2: endpoint {
					remote-endpoint = <&ptm6_out_port>;
				};
			};

			port@3 {
				reg = <3>;
				funnel1_in_port3: endpoint {
					remote-endpoint = <&ptm7_out_port>;
				};
			};
		};
	};

	funnel@0,e3cc1000 {
		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
		reg = <0 0xe3cc1000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		out-ports {
			port {
				funnel2_out_port0: endpoint {
					remote-endpoint =
						<&replicator2_in_port0>;
				};
			};
		};

		in-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				funnel2_in_port0: endpoint {
					remote-endpoint = <&ptm8_out_port>;
				};
			};

			port@1 {
				reg = <1>;
				funnel2_in_port1: endpoint {
					remote-endpoint = <&ptm9_out_port>;
				};
			};

			port@2 {
				reg = <2>;
				funnel2_in_port2: endpoint {
					remote-endpoint = <&ptm10_out_port>;
				};
			};

			port@3 {
				reg = <3>;
				funnel2_in_port3: endpoint {
					remote-endpoint = <&ptm11_out_port>;
				};
			};
		};
	};

	funnel@0,e3d01000 {
		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
		reg = <0 0xe3d01000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		out-ports {
			port {
				funnel3_out_port0: endpoint {
					remote-endpoint =
						<&replicator3_in_port0>;
				};
			};
		};

		in-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				funnel3_in_port0: endpoint {
					remote-endpoint = <&ptm12_out_port>;
				};
			};

			port@1 {
				reg = <1>;
				funnel3_in_port1: endpoint {
					remote-endpoint = <&ptm13_out_port>;
				};
			};

			port@2 {
				reg = <2>;
				funnel3_in_port2: endpoint {
					remote-endpoint = <&ptm14_out_port>;
				};
			};

			port@3 {
				reg = <3>;
				funnel3_in_port3: endpoint {
					remote-endpoint = <&ptm15_out_port>;
				};
			};
		};
	};

	funnel@0,e3c04000 {
		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
		reg = <0 0xe3c04000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		out-ports {
			port {
				funnel4_out_port0: endpoint {
					remote-endpoint = <&tpiu_in_port>;
				};
			};
		};

		in-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				funnel4_in_port0: endpoint {
					remote-endpoint =
						<&replicator0_out_port1>;
				};
			};

			port@1 {
				reg = <1>;
				funnel4_in_port1: endpoint {
					remote-endpoint =
						<&replicator1_out_port1>;
				};
			};

			port@2 {
				reg = <2>;
				funnel4_in_port2: endpoint {
					remote-endpoint =
						<&replicator2_out_port1>;
				};
			};

			port@3 {
				reg = <3>;
				funnel4_in_port3: endpoint {
					remote-endpoint =
						<&replicator3_out_port1>;
				};
			};
		};
	};

	ptm@0,e3c7c000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3c7c000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU0>;
		out-ports {
			port {
				ptm0_out_port: endpoint {
					remote-endpoint = <&funnel0_in_port0>;
				};
			};
		};
	};

	ptm@0,e3c7d000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3c7d000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU1>;
		out-ports {
			port {
				ptm1_out_port: endpoint {
					remote-endpoint = <&funnel0_in_port1>;
				};
			};
		};
	};

	ptm@0,e3c7e000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3c7e000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU2>;
		out-ports {
			port {
				ptm2_out_port: endpoint {
					remote-endpoint = <&funnel0_in_port2>;
				};
			};
		};
	};

	ptm@0,e3c7f000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3c7f000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU3>;
		out-ports {
			port {
				ptm3_out_port: endpoint {
					remote-endpoint = <&funnel0_in_port3>;
				};
			};
		};
	};

	ptm@0,e3cbc000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cbc000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU4>;
		out-ports {
			port {
				ptm4_out_port: endpoint {
					remote-endpoint = <&funnel1_in_port0>;
				};
			};
		};
	};

	ptm@0,e3cbd000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cbd000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU5>;
		out-ports {
			port {
				ptm5_out_port: endpoint {
					remote-endpoint = <&funnel1_in_port1>;
				};
			};
		};
	};

	ptm@0,e3cbe000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cbe000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU6>;
		out-ports {
			port {
				ptm6_out_port: endpoint {
					remote-endpoint = <&funnel1_in_port2>;
				};
			};
		};
	};

	ptm@0,e3cbf000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cbf000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU7>;
		out-ports {
			port {
				ptm7_out_port: endpoint {
					remote-endpoint = <&funnel1_in_port3>;
				};
			};
		};
	};

	ptm@0,e3cfc000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cfc000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU8>;
		out-ports {
			port {
				ptm8_out_port: endpoint {
					remote-endpoint = <&funnel2_in_port0>;
				};
			};
		};
	};

	ptm@0,e3cfd000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cfd000 0 0x1000>;
		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU9>;
		out-ports {
			port {
				ptm9_out_port: endpoint {
					remote-endpoint = <&funnel2_in_port1>;
				};
			};
		};
	};

	ptm@0,e3cfe000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cfe000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU10>;
		out-ports {
			port {
				ptm10_out_port: endpoint {
					remote-endpoint = <&funnel2_in_port2>;
				};
			};
		};
	};

	ptm@0,e3cff000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3cff000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU11>;
		out-ports {
			port {
				ptm11_out_port: endpoint {
					remote-endpoint = <&funnel2_in_port3>;
				};
			};
		};
	};

	ptm@0,e3d3c000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3d3c000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU12>;
		out-ports {
			port {
				ptm12_out_port: endpoint {
					remote-endpoint = <&funnel3_in_port0>;
				};
			};
		};
	};

	ptm@0,e3d3d000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3d3d000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU13>;
		out-ports {
			port {
				ptm13_out_port: endpoint {
					remote-endpoint = <&funnel3_in_port1>;
				};
			};
		};
	};

	ptm@0,e3d3e000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3d3e000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU14>;
		out-ports {
			port {
				ptm14_out_port: endpoint {
					remote-endpoint = <&funnel3_in_port2>;
				};
			};
		};
	};

	ptm@0,e3d3f000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0 0xe3d3f000 0 0x1000>;

		clocks = <&clk_375m>;
		clock-names = "apb_pclk";
		cpu = <&CPU15>;
		out-ports {
			port {
				ptm15_out_port: endpoint {
					remote-endpoint = <&funnel3_in_port3>;
				};
			};
		};
	};
};