| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2019 MediaTek Inc. |
| * |
| * Author: Ryder Lee <ryder.lee@mediatek.com> |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/mt7629-clk.h> |
| #include <dt-bindings/power/mt7622-power.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/reset/mt7629-resets.h> |
| |
| / { |
| compatible = "mediatek,mt7629"; |
| interrupt-parent = <&sysirq>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "mediatek,mt6589-smp"; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| clock-frequency = <1250000000>; |
| cci-control-port = <&cci_control2>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x1>; |
| clock-frequency = <1250000000>; |
| cci-control-port = <&cci_control2>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-affinity = <&cpu0>, <&cpu1>; |
| }; |
| |
| clk20m: oscillator-0 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <20000000>; |
| clock-output-names = "clk20m"; |
| }; |
| |
| clk40m: oscillator-1 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <40000000>; |
| clock-output-names = "clkxtal"; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| clock-frequency = <20000000>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| infracfg: syscon@10000000 { |
| compatible = "mediatek,mt7629-infracfg", "syscon"; |
| reg = <0x10000000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| pericfg: syscon@10002000 { |
| compatible = "mediatek,mt7629-pericfg", "syscon"; |
| reg = <0x10002000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| scpsys: power-controller@10006000 { |
| compatible = "mediatek,mt7629-scpsys", |
| "mediatek,mt7622-scpsys"; |
| #power-domain-cells = <1>; |
| reg = <0x10006000 0x1000>; |
| clocks = <&topckgen CLK_TOP_HIF_SEL>; |
| clock-names = "hif_sel"; |
| assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>; |
| assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>; |
| infracfg = <&infracfg>; |
| }; |
| |
| timer: timer@10009000 { |
| compatible = "mediatek,mt7629-timer", |
| "mediatek,mt6765-timer"; |
| reg = <0x10009000 0x60>; |
| interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk20m>; |
| clock-names = "clk20m"; |
| }; |
| |
| sysirq: interrupt-controller@10200a80 { |
| compatible = "mediatek,mt7629-sysirq", |
| "mediatek,mt6577-sysirq"; |
| reg = <0x10200a80 0x20>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| apmixedsys: syscon@10209000 { |
| compatible = "mediatek,mt7629-apmixedsys", "syscon"; |
| reg = <0x10209000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| rng: rng@1020f000 { |
| compatible = "mediatek,mt7629-rng", |
| "mediatek,mt7623-rng"; |
| reg = <0x1020f000 0x100>; |
| clocks = <&infracfg CLK_INFRA_TRNG_PD>; |
| clock-names = "rng"; |
| }; |
| |
| topckgen: syscon@10210000 { |
| compatible = "mediatek,mt7629-topckgen", "syscon"; |
| reg = <0x10210000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| watchdog: watchdog@10212000 { |
| compatible = "mediatek,mt7629-wdt", |
| "mediatek,mt6589-wdt"; |
| reg = <0x10212000 0x100>; |
| }; |
| |
| pio: pinctrl@10217000 { |
| compatible = "mediatek,mt7629-pinctrl"; |
| reg = <0x10217000 0x8000>, |
| <0x10005000 0x1000>; |
| reg-names = "base", "eint"; |
| gpio-controller; |
| gpio-ranges = <&pio 0 0 79>; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| gic: interrupt-controller@10300000 { |
| compatible = "arm,gic-400"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| reg = <0x10310000 0x1000>, |
| <0x10320000 0x1000>, |
| <0x10340000 0x2000>, |
| <0x10360000 0x2000>; |
| }; |
| |
| cci: cci@10390000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x10390000 0x1000>; |
| ranges = <0 0x10390000 0x10000>; |
| |
| cci_control0: slave-if@1000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace-lite"; |
| reg = <0x1000 0x1000>; |
| }; |
| |
| cci_control1: slave-if@4000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x4000 0x1000>; |
| }; |
| |
| cci_control2: slave-if@5000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x5000 0x1000>; |
| }; |
| |
| pmu@9000 { |
| compatible = "arm,cci-400-pmu,r1"; |
| reg = <0x9000 0x5000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| uart0: serial@11002000 { |
| compatible = "mediatek,mt7629-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0x11002000 0x400>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART0_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@11003000 { |
| compatible = "mediatek,mt7629-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0x11003000 0x400>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART1_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@11004000 { |
| compatible = "mediatek,mt7629-uart", |
| "mediatek,mt6577-uart"; |
| reg = <0x11004000 0x400>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART2_PD>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@11006000 { |
| compatible = "mediatek,mt7629-pwm"; |
| reg = <0x11006000 0x1000>; |
| #pwm-cells = <2>; |
| clocks = <&topckgen CLK_TOP_PWM_SEL>, |
| <&pericfg CLK_PERI_PWM_PD>, |
| <&pericfg CLK_PERI_PWM1_PD>; |
| clock-names = "top", "main", "pwm1"; |
| assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>; |
| assigned-clock-parents = |
| <&topckgen CLK_TOP_UNIVPLL2_D4>; |
| status = "disabled"; |
| }; |
| |
| i2c: i2c@11007000 { |
| compatible = "mediatek,mt7629-i2c", |
| "mediatek,mt2712-i2c"; |
| reg = <0x11007000 0x90>, |
| <0x11000100 0x80>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; |
| clock-div = <4>; |
| clocks = <&pericfg CLK_PERI_I2C0_PD>, |
| <&pericfg CLK_PERI_AP_DMA_PD>; |
| clock-names = "main", "dma"; |
| assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>; |
| assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi: spi@1100a000 { |
| compatible = "mediatek,mt7629-spi", |
| "mediatek,mt7622-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x1100a000 0x100>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, |
| <&topckgen CLK_TOP_SPI0_SEL>, |
| <&pericfg CLK_PERI_SPI0_PD>; |
| clock-names = "parent-clk", "sel-clk", "spi-clk"; |
| status = "disabled"; |
| }; |
| |
| qspi: spi@11014000 { |
| compatible = "mediatek,mt7629-nor", |
| "mediatek,mt8173-nor"; |
| reg = <0x11014000 0xe0>; |
| clocks = <&pericfg CLK_PERI_FLASH_PD>, |
| <&topckgen CLK_TOP_FLASH_SEL>; |
| clock-names = "spi", "sf"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ssusbsys: syscon@1a000000 { |
| compatible = "mediatek,mt7629-ssusbsys", "syscon"; |
| reg = <0x1a000000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| ssusb: usb@1a0c0000 { |
| compatible = "mediatek,mt7629-xhci", |
| "mediatek,mtk-xhci"; |
| reg = <0x1a0c0000 0x01000>, |
| <0x1a0c3e00 0x0100>; |
| reg-names = "mac", "ippc"; |
| interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&ssusbsys CLK_SSUSB_SYS_EN>, |
| <&ssusbsys CLK_SSUSB_REF_EN>, |
| <&ssusbsys CLK_SSUSB_MCU_EN>, |
| <&ssusbsys CLK_SSUSB_DMA_EN>; |
| clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; |
| assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>, |
| <&topckgen CLK_TOP_SATA_SEL>, |
| <&topckgen CLK_TOP_HIF_SEL>; |
| assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>, |
| <&topckgen CLK_TOP_UNIVPLL2_D4>, |
| <&topckgen CLK_TOP_UNIVPLL1_D2>; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>; |
| phys = <&u2port0 PHY_TYPE_USB2>, |
| <&u3port0 PHY_TYPE_USB3>; |
| status = "disabled"; |
| }; |
| |
| u3phy0: t-phy@1a0c4000 { |
| compatible = "mediatek,mt7629-tphy", |
| "mediatek,generic-tphy-v2"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x1a0c4000 0xe00>; |
| status = "disabled"; |
| |
| u2port0: usb-phy@0 { |
| reg = <0 0x700>; |
| clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| status = "okay"; |
| }; |
| |
| u3port0: usb-phy@700 { |
| reg = <0x700 0x700>; |
| clocks = <&clk20m>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| status = "okay"; |
| }; |
| }; |
| |
| pciesys: syscon@1a100800 { |
| compatible = "mediatek,mt7629-pciesys", "syscon"; |
| reg = <0x1a100800 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pcie: pcie@1a140000 { |
| compatible = "mediatek,mt7629-pcie"; |
| device_type = "pci"; |
| reg = <0x1a140000 0x1000>, |
| <0x1a145000 0x1000>; |
| reg-names = "subsys","port1"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, |
| <&pciesys CLK_PCIE_P0_AHB_EN>, |
| <&pciesys CLK_PCIE_P1_AUX_EN>, |
| <&pciesys CLK_PCIE_P1_AXI_EN>, |
| <&pciesys CLK_PCIE_P1_OBFF_EN>, |
| <&pciesys CLK_PCIE_P1_PIPE_EN>; |
| clock-names = "sys_ck1", "ahb_ck1", |
| "aux_ck1", "axi_ck1", |
| "obff_ck1", "pipe_ck1"; |
| assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>, |
| <&topckgen CLK_TOP_AXI_SEL>, |
| <&topckgen CLK_TOP_HIF_SEL>; |
| assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>, |
| <&topckgen CLK_TOP_SYSPLL1_D2>, |
| <&topckgen CLK_TOP_UNIVPLL1_D2>; |
| phys = <&pcieport1 PHY_TYPE_PCIE>; |
| phy-names = "pcie-phy1"; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; |
| bus-range = <0x00 0xff>; |
| ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; |
| |
| pcie1: pcie@1,0 { |
| device_type = "pci"; |
| reg = <0x0800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges; |
| num-lanes = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie_intc1 0>, |
| <0 0 0 2 &pcie_intc1 1>, |
| <0 0 0 3 &pcie_intc1 2>, |
| <0 0 0 4 &pcie_intc1 3>; |
| |
| pcie_intc1: interrupt-controller { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| }; |
| |
| pciephy1: t-phy@1a14a000 { |
| compatible = "mediatek,mt7629-tphy", |
| "mediatek,generic-tphy-v2"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x1a14a000 0x1000>; |
| status = "disabled"; |
| |
| pcieport1: pcie-phy@0 { |
| reg = <0 0x1000>; |
| clocks = <&clk20m>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| status = "okay"; |
| }; |
| }; |
| |
| ethsys: syscon@1b000000 { |
| compatible = "mediatek,mt7629-ethsys", "syscon"; |
| reg = <0x1b000000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| eth: ethernet@1b100000 { |
| compatible = "mediatek,mt7629-eth","syscon"; |
| reg = <0x1b100000 0x20000>; |
| interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_ETH_SEL>, |
| <&topckgen CLK_TOP_F10M_REF_SEL>, |
| <ðsys CLK_ETH_ESW_EN>, |
| <ðsys CLK_ETH_GP0_EN>, |
| <ðsys CLK_ETH_GP1_EN>, |
| <ðsys CLK_ETH_GP2_EN>, |
| <ðsys CLK_ETH_FE_EN>, |
| <&sgmiisys0 CLK_SGMII_TX_EN>, |
| <&sgmiisys0 CLK_SGMII_RX_EN>, |
| <&sgmiisys0 CLK_SGMII_CDR_REF>, |
| <&sgmiisys0 CLK_SGMII_CDR_FB>, |
| <&sgmiisys1 CLK_SGMII_TX_EN>, |
| <&sgmiisys1 CLK_SGMII_RX_EN>, |
| <&sgmiisys1 CLK_SGMII_CDR_REF>, |
| <&sgmiisys1 CLK_SGMII_CDR_FB>, |
| <&apmixedsys CLK_APMIXED_SGMIPLL>, |
| <&apmixedsys CLK_APMIXED_ETH2PLL>; |
| clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1", |
| "gp2", "fe", "sgmii_tx250m", "sgmii_rx250m", |
| "sgmii_cdr_ref", "sgmii_cdr_fb", |
| "sgmii2_tx250m", "sgmii2_rx250m", |
| "sgmii2_cdr_ref", "sgmii2_cdr_fb", |
| "sgmii_ck", "eth2pll"; |
| assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>, |
| <&topckgen CLK_TOP_F10M_REF_SEL>; |
| assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>, |
| <&topckgen CLK_TOP_SGMIIPLL_D2>; |
| power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; |
| mediatek,ethsys = <ðsys>; |
| mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; |
| mediatek,infracfg = <&infracfg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sgmiisys0: syscon@1b128000 { |
| compatible = "mediatek,mt7629-sgmiisys", "syscon"; |
| reg = <0x1b128000 0x3000>; |
| #clock-cells = <1>; |
| }; |
| |
| sgmiisys1: syscon@1b130000 { |
| compatible = "mediatek,mt7629-sgmiisys", "syscon"; |
| reg = <0x1b130000 0x3000>; |
| #clock-cells = <1>; |
| }; |
| }; |
| }; |
