| # SPDX-License-Identifier: GPL-2.0 |
| |
| menu "PCI controller drivers" |
| depends on PCI |
| |
| config PCI_AARDVARK |
| tristate "Aardvark PCIe controller" |
| depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST |
| depends on OF |
| depends on PCI_MSI |
| select PCI_BRIDGE_EMUL |
| help |
| Add support for Aardvark 64bit PCIe Host Controller. This |
| controller is part of the South Bridge of the Marvel Armada |
| 3700 SoC. |
| |
| config PCIE_ALTERA |
| tristate "Altera PCIe controller" |
| depends on ARM || NIOS2 || ARM64 || COMPILE_TEST |
| help |
| Say Y here if you want to enable PCIe controller support on Altera |
| FPGA. |
| |
| config PCIE_ALTERA_MSI |
| tristate "Altera PCIe MSI feature" |
| depends on PCIE_ALTERA |
| depends on PCI_MSI |
| help |
| Say Y here if you want PCIe MSI support for the Altera FPGA. |
| This MSI driver supports Altera MSI to GIC controller IP. |
| |
| config PCIE_APPLE_MSI_DOORBELL_ADDR |
| hex |
| default 0xfffff000 |
| depends on PCIE_APPLE |
| |
| config PCIE_APPLE |
| tristate "Apple PCIe controller" |
| depends on ARCH_APPLE || COMPILE_TEST |
| depends on OF |
| depends on PCI_MSI |
| select PCI_HOST_COMMON |
| help |
| Say Y here if you want to enable PCIe controller support on Apple |
| system-on-chips, like the Apple M1. This is required for the USB |
| type-A ports, Ethernet, Wi-Fi, and Bluetooth. |
| |
| If unsure, say Y if you have an Apple Silicon system. |
| |
| config PCI_VERSATILE |
| bool "ARM Versatile PB PCI controller" |
| depends on ARCH_VERSATILE || COMPILE_TEST |
| |
| config PCIE_BRCMSTB |
| tristate "Broadcom Brcmstb PCIe controller" |
| depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \ |
| BMIPS_GENERIC || COMPILE_TEST |
| depends on OF |
| depends on PCI_MSI |
| default ARCH_BRCMSTB || BMIPS_GENERIC |
| help |
| Say Y here to enable PCIe host controller support for |
| Broadcom STB based SoCs, like the Raspberry Pi 4. |
| |
| config PCIE_IPROC |
| tristate |
| help |
| This enables the iProc PCIe core controller support for Broadcom's |
| iProc family of SoCs. An appropriate bus interface driver needs |
| to be enabled to select this. |
| |
| config PCIE_IPROC_PLATFORM |
| tristate "Broadcom iProc PCIe platform bus driver" |
| depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST) |
| depends on OF |
| select PCIE_IPROC |
| default ARCH_BCM_IPROC |
| help |
| Say Y here if you want to use the Broadcom iProc PCIe controller |
| through the generic platform bus interface |
| |
| config PCIE_IPROC_BCMA |
| tristate "Broadcom iProc BCMA PCIe controller" |
| depends on ARM && (ARCH_BCM_IPROC || COMPILE_TEST) |
| select PCIE_IPROC |
| select BCMA |
| default ARCH_BCM_5301X |
| help |
| Say Y here if you want to use the Broadcom iProc PCIe controller |
| through the BCMA bus interface |
| |
| config PCIE_IPROC_MSI |
| bool "Broadcom iProc PCIe MSI support" |
| depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA |
| depends on PCI_MSI |
| default ARCH_BCM_IPROC |
| help |
| Say Y here if you want to enable MSI support for Broadcom's iProc |
| PCIe controller |
| |
| config PCI_HOST_THUNDER_PEM |
| bool "Cavium Thunder PCIe controller to off-chip devices" |
| depends on ARM64 || COMPILE_TEST |
| depends on OF || (ACPI && PCI_QUIRKS) |
| select PCI_HOST_COMMON |
| help |
| Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs. |
| |
| config PCI_HOST_THUNDER_ECAM |
| bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" |
| depends on ARM64 || COMPILE_TEST |
| depends on OF || (ACPI && PCI_QUIRKS) |
| select PCI_HOST_COMMON |
| help |
| Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs. |
| |
| config PCI_FTPCI100 |
| bool "Faraday Technology FTPCI100 PCI controller" |
| depends on OF |
| default ARCH_GEMINI |
| |
| config PCI_HOST_COMMON |
| tristate |
| select PCI_ECAM |
| |
| config PCI_HOST_GENERIC |
| tristate "Generic PCI host controller" |
| depends on OF |
| select PCI_HOST_COMMON |
| select IRQ_DOMAIN |
| help |
| Say Y here if you want to support a simple generic PCI host |
| controller, such as the one emulated by kvmtool. |
| |
| config PCIE_HISI_ERR |
| depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST) |
| bool "HiSilicon HIP PCIe controller error handling driver" |
| help |
| Say Y here if you want error handling support |
| for the PCIe controller's errors on HiSilicon HIP SoCs |
| |
| config PCI_IXP4XX |
| bool "Intel IXP4xx PCI controller" |
| depends on ARM && OF |
| depends on ARCH_IXP4XX || COMPILE_TEST |
| default ARCH_IXP4XX |
| help |
| Say Y here if you want support for the PCI host controller found |
| in the Intel IXP4xx XScale-based network processor SoC. |
| |
| config VMD |
| depends on PCI_MSI && X86_64 && !UML |
| tristate "Intel Volume Management Device Driver" |
| help |
| Adds support for the Intel Volume Management Device (VMD). VMD is a |
| secondary PCI host bridge that allows PCI Express root ports, |
| and devices attached to them, to be removed from the default |
| PCI domain and placed within the VMD domain. This provides |
| more bus resources than are otherwise possible with a |
| single domain. If you know your system provides one of these and |
| has devices attached to it, say Y; if you are not sure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called vmd. |
| |
| config PCI_LOONGSON |
| bool "LOONGSON PCIe controller" |
| depends on MACH_LOONGSON64 || COMPILE_TEST |
| depends on OF || ACPI |
| depends on PCI_QUIRKS |
| default MACH_LOONGSON64 |
| help |
| Say Y here if you want to enable PCI controller support on |
| Loongson systems. |
| |
| config PCI_MVEBU |
| tristate "Marvell EBU PCIe controller" |
| depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST |
| depends on MVEBU_MBUS |
| depends on ARM |
| depends on OF |
| select PCI_BRIDGE_EMUL |
| help |
| Add support for Marvell EBU PCIe controller. This PCIe controller |
| is used on 32-bit Marvell ARM SoCs: Dove, Kirkwood, Armada 370, |
| Armada XP, Armada 375, Armada 38x and Armada 39x. |
| |
| config PCIE_MEDIATEK |
| tristate "MediaTek PCIe controller" |
| depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST |
| depends on OF |
| depends on PCI_MSI |
| help |
| Say Y here if you want to enable PCIe controller support on |
| MediaTek SoCs. |
| |
| config PCIE_MEDIATEK_GEN3 |
| tristate "MediaTek Gen3 PCIe controller" |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| depends on PCI_MSI |
| help |
| Adds support for PCIe Gen3 MAC controller for MediaTek SoCs. |
| This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed, |
| and support up to 256 MSI interrupt numbers for |
| multi-function devices. |
| |
| Say Y here if you want to enable Gen3 PCIe controller support on |
| MediaTek SoCs. |
| |
| config PCIE_MT7621 |
| tristate "MediaTek MT7621 PCIe controller" |
| depends on SOC_MT7621 || COMPILE_TEST |
| select PHY_MT7621_PCI |
| default SOC_MT7621 |
| help |
| This selects a driver for the MediaTek MT7621 PCIe Controller. |
| |
| config PCI_HYPERV_INTERFACE |
| tristate "Microsoft Hyper-V PCI Interface" |
| depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI |
| help |
| The Hyper-V PCI Interface is a helper driver that allows other |
| drivers to have a common interface with the Hyper-V PCI frontend |
| driver. |
| |
| config PCI_TEGRA |
| bool "NVIDIA Tegra PCIe controller" |
| depends on ARCH_TEGRA || COMPILE_TEST |
| depends on PCI_MSI |
| help |
| Say Y here if you want support for the PCIe host controller found |
| on NVIDIA Tegra SoCs. |
| |
| config PCIE_RCAR_HOST |
| bool "Renesas R-Car PCIe controller (host mode)" |
| depends on ARCH_RENESAS || COMPILE_TEST |
| depends on PCI_MSI |
| help |
| Say Y here if you want PCIe controller support on R-Car SoCs in host |
| mode. |
| |
| config PCIE_RCAR_EP |
| bool "Renesas R-Car PCIe controller (endpoint mode)" |
| depends on ARCH_RENESAS || COMPILE_TEST |
| depends on PCI_ENDPOINT |
| help |
| Say Y here if you want PCIe controller support on R-Car SoCs in |
| endpoint mode. |
| |
| config PCI_RCAR_GEN2 |
| bool "Renesas R-Car Gen2 Internal PCI controller" |
| depends on ARCH_RENESAS || COMPILE_TEST |
| depends on ARM |
| help |
| Say Y here if you want internal PCI support on R-Car Gen2 SoC. |
| There are 3 internal PCI controllers available with a single |
| built-in EHCI/OHCI host controller present on each one. |
| |
| config PCIE_ROCKCHIP |
| bool |
| depends on PCI |
| |
| config PCIE_ROCKCHIP_HOST |
| tristate "Rockchip PCIe controller (host mode)" |
| depends on ARCH_ROCKCHIP || COMPILE_TEST |
| depends on OF |
| depends on PCI_MSI |
| select MFD_SYSCON |
| select PCIE_ROCKCHIP |
| help |
| Say Y here if you want internal PCI support on Rockchip SoC. |
| There is 1 internal PCIe port available to support GEN2 with |
| 4 slots. |
| |
| config PCIE_ROCKCHIP_EP |
| bool "Rockchip PCIe controller (endpoint mode)" |
| depends on ARCH_ROCKCHIP || COMPILE_TEST |
| depends on OF |
| depends on PCI_ENDPOINT |
| select MFD_SYSCON |
| select PCIE_ROCKCHIP |
| help |
| Say Y here if you want to support Rockchip PCIe controller in |
| endpoint mode on Rockchip SoC. There is 1 internal PCIe port |
| available to support GEN2 with 4 slots. |
| |
| config PCI_V3_SEMI |
| bool "V3 Semiconductor PCI controller" |
| depends on OF |
| depends on ARM || COMPILE_TEST |
| default ARCH_INTEGRATOR_AP |
| |
| config PCI_XGENE |
| bool "X-Gene PCIe controller" |
| depends on ARM64 || COMPILE_TEST |
| depends on OF || (ACPI && PCI_QUIRKS) |
| help |
| Say Y here if you want internal PCI support on APM X-Gene SoC. |
| There are 5 internal PCIe ports available. Each port is GEN3 capable |
| and have varied lanes from x1 to x8. |
| |
| config PCI_XGENE_MSI |
| bool "X-Gene v1 PCIe MSI feature" |
| depends on PCI_XGENE |
| depends on PCI_MSI |
| default y |
| help |
| Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC. |
| This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC. |
| |
| config PCIE_XILINX |
| bool "Xilinx AXI PCIe controller" |
| depends on OF |
| depends on PCI_MSI |
| help |
| Say 'Y' here if you want kernel to support the Xilinx AXI PCIe |
| Host Bridge driver. |
| |
| config PCIE_XILINX_DMA_PL |
| bool "Xilinx DMA PL PCIe host bridge support" |
| depends on ARCH_ZYNQMP || COMPILE_TEST |
| depends on PCI_MSI |
| select PCI_HOST_COMMON |
| help |
| Say 'Y' here if you want kernel support for the Xilinx PL DMA |
| PCIe host bridge. The controller is a Soft IP which can act as |
| Root Port. If your system provides Xilinx PCIe host controller |
| bridge DMA as Soft IP say 'Y'; if you are not sure, say 'N'. |
| |
| config PCIE_XILINX_NWL |
| bool "Xilinx NWL PCIe controller" |
| depends on ARCH_ZYNQMP || COMPILE_TEST |
| depends on PCI_MSI |
| help |
| Say 'Y' here if you want kernel support for Xilinx |
| NWL PCIe controller. The controller can act as Root Port |
| or End Point. The current option selection will only |
| support root port enabling. |
| |
| config PCIE_XILINX_CPM |
| bool "Xilinx Versal CPM PCI controller" |
| depends on ARCH_ZYNQMP || COMPILE_TEST |
| select PCI_HOST_COMMON |
| help |
| Say 'Y' here if you want kernel support for the |
| Xilinx Versal CPM host bridge. |
| |
| source "drivers/pci/controller/cadence/Kconfig" |
| source "drivers/pci/controller/dwc/Kconfig" |
| source "drivers/pci/controller/mobiveil/Kconfig" |
| source "drivers/pci/controller/plda/Kconfig" |
| endmenu |
