drivers/char/tpm/tpm_i2c_atmel.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * ATMEL I2C TPM AT97SC3204T
 *
 * Copyright (C) 2012 V Lab Technologies
 *  Teddy Reed <teddy@prosauce.org>
 * Copyright (C) 2013, Obsidian Research Corp.
 *  Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
 * Device driver for ATMEL I2C TPMs.
 *
 * Teddy Reed determined the basic I2C command flow, unlike other I2C TPM
 * devices the raw TCG formatted TPM command data is written via I2C and then
 * raw TCG formatted TPM command data is returned via I2C.
 *
 * TGC status/locality/etc functions seen in the LPC implementation do not
 * seem to be present.
 */
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include "tpm.h"

#define I2C_DRIVER_NAME "tpm_i2c_atmel"

#define TPM_I2C_SHORT_TIMEOUT  750     /* ms */
#define TPM_I2C_LONG_TIMEOUT   2000    /* 2 sec */

#define ATMEL_STS_OK 1

struct priv_data {
	size_t len;
	/* This is the amount we read on the first try. 25 was chosen to fit a
	 * fair number of read responses in the buffer so a 2nd retry can be
	 * avoided in small message cases. */
	u8 buffer[sizeof(struct tpm_header) + 25];
};

static int i2c_atmel_send(struct tpm_chip *chip, u8 *buf, size_t len)
{
	struct priv_data *priv = dev_get_drvdata(&chip->dev);
	struct i2c_client *client = to_i2c_client(chip->dev.parent);
	s32 status;

	priv->len = 0;

	if (len <= 2)
		return -EIO;

	status = i2c_master_send(client, buf, len);

	dev_dbg(&chip->dev,
		"%s(buf=%*ph len=%0zx) -> sts=%d\n", __func__,
		(int)min_t(size_t, 64, len), buf, len, status);

	if (status < 0)
		return status;

	/* The upper layer does not support incomplete sends. */
	if (status != len)
		return -E2BIG;

	return 0;
}

static int i2c_atmel_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
	struct priv_data *priv = dev_get_drvdata(&chip->dev);
	struct i2c_client *client = to_i2c_client(chip->dev.parent);
	struct tpm_header *hdr = (struct tpm_header *)priv->buffer;
	u32 expected_len;
	int rc;

	if (priv->len == 0)
		return -EIO;

	/* Get the message size from the message header, if we didn't get the
	 * whole message in read_status then we need to re-read the
	 * message. */
	expected_len = be32_to_cpu(hdr->length);
	if (expected_len > count)
		return -ENOMEM;

	if (priv->len >= expected_len) {
		dev_dbg(&chip->dev,
			"%s early(buf=%*ph count=%0zx) -> ret=%d\n", __func__,
			(int)min_t(size_t, 64, expected_len), buf, count,
			expected_len);
		memcpy(buf, priv->buffer, expected_len);
		return expected_len;
	}

	rc = i2c_master_recv(client, buf, expected_len);
	dev_dbg(&chip->dev,
		"%s reread(buf=%*ph count=%0zx) -> ret=%d\n", __func__,
		(int)min_t(size_t, 64, expected_len), buf, count,
		expected_len);
	return rc;
}

static void i2c_atmel_cancel(struct tpm_chip *chip)
{
	dev_err(&chip->dev, "TPM operation cancellation was requested, but is not supported");
}

static u8 i2c_atmel_read_status(struct tpm_chip *chip)
{
	struct priv_data *priv = dev_get_drvdata(&chip->dev);
	struct i2c_client *client = to_i2c_client(chip->dev.parent);
	int rc;

	/* The TPM fails the I2C read until it is ready, so we do the entire
	 * transfer here and buffer it locally. This way the common code can
	 * properly handle the timeouts. */
	priv->len = 0;
	memset(priv->buffer, 0, sizeof(priv->buffer));


	/* Once the TPM has completed the command the command remains readable
	 * until another command is issued. */
	rc = i2c_master_recv(client, priv->buffer, sizeof(priv->buffer));
	dev_dbg(&chip->dev,
		"%s: sts=%d", __func__, rc);
	if (rc <= 0)
		return 0;

	priv->len = rc;

	return ATMEL_STS_OK;
}

static bool i2c_atmel_req_canceled(struct tpm_chip *chip, u8 status)
{
	return false;
}

static const struct tpm_class_ops i2c_atmel = {
	.flags = TPM_OPS_AUTO_STARTUP,
	.status = i2c_atmel_read_status,
	.recv = i2c_atmel_recv,
	.send = i2c_atmel_send,
	.cancel = i2c_atmel_cancel,
	.req_complete_mask = ATMEL_STS_OK,
	.req_complete_val = ATMEL_STS_OK,
	.req_canceled = i2c_atmel_req_canceled,
};

static int i2c_atmel_probe(struct i2c_client *client)
{
	struct tpm_chip *chip;
	struct device *dev = &client->dev;
	struct priv_data *priv;

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
		return -ENODEV;

	chip = tpmm_chip_alloc(dev, &i2c_atmel);
	if (IS_ERR(chip))
		return PTR_ERR(chip);

	priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	/* Default timeouts */
	chip->timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
	chip->timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
	chip->timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
	chip->timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);

	dev_set_drvdata(&chip->dev, priv);

	/* There is no known way to probe for this device, and all version
	 * information seems to be read via TPM commands. Thus we rely on the
	 * TPM startup process in the common code to detect the device. */

	return tpm_chip_register(chip);
}

static void i2c_atmel_remove(struct i2c_client *client)
{
	struct device *dev = &(client->dev);
	struct tpm_chip *chip = dev_get_drvdata(dev);
	tpm_chip_unregister(chip);
}

static const struct i2c_device_id i2c_atmel_id[] = {
	{I2C_DRIVER_NAME, 0},
	{}
};
MODULE_DEVICE_TABLE(i2c, i2c_atmel_id);

#ifdef CONFIG_OF
static const struct of_device_id i2c_atmel_of_match[] = {
	{.compatible = "atmel,at97sc3204t"},
	{},
};
MODULE_DEVICE_TABLE(of, i2c_atmel_of_match);
#endif

static SIMPLE_DEV_PM_OPS(i2c_atmel_pm_ops, tpm_pm_suspend, tpm_pm_resume);

static struct i2c_driver i2c_atmel_driver = {
	.id_table = i2c_atmel_id,
	.probe = i2c_atmel_probe,
	.remove = i2c_atmel_remove,
	.driver = {
		.name = I2C_DRIVER_NAME,
		.pm = &i2c_atmel_pm_ops,
		.of_match_table = of_match_ptr(i2c_atmel_of_match),
	},
};

module_i2c_driver(i2c_atmel_driver);

MODULE_AUTHOR("Jason Gunthorpe <jgunthorpe@obsidianresearch.com>");
MODULE_DESCRIPTION("Atmel TPM I2C Driver");
MODULE_LICENSE("GPL");