| // SPDX-License-Identifier: GPL-2.0-or-later |
| // |
| // Copyright (C) 2018 ROHM Semiconductors |
| // |
| // ROHM BD71837MWV and BD71847MWV PMIC driver |
| // |
| // Datasheet for BD71837MWV available from |
| // https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e |
| |
| #include <linux/gpio_keys.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/rohm-bd718x7.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| |
| static struct gpio_keys_button button = { |
| .code = KEY_POWER, |
| .gpio = -1, |
| .type = EV_KEY, |
| }; |
| |
| static struct gpio_keys_platform_data bd718xx_powerkey_data = { |
| .buttons = &button, |
| .nbuttons = 1, |
| .name = "bd718xx-pwrkey", |
| }; |
| |
| static struct mfd_cell bd71837_mfd_cells[] = { |
| { |
| .name = "gpio-keys", |
| .platform_data = &bd718xx_powerkey_data, |
| .pdata_size = sizeof(bd718xx_powerkey_data), |
| }, |
| { .name = "bd71837-clk", }, |
| { .name = "bd71837-pmic", }, |
| }; |
| |
| static struct mfd_cell bd71847_mfd_cells[] = { |
| { |
| .name = "gpio-keys", |
| .platform_data = &bd718xx_powerkey_data, |
| .pdata_size = sizeof(bd718xx_powerkey_data), |
| }, |
| { .name = "bd71847-clk", }, |
| { .name = "bd71847-pmic", }, |
| }; |
| |
| static const struct regmap_irq bd718xx_irqs[] = { |
| REGMAP_IRQ_REG(BD718XX_INT_SWRST, 0, BD718XX_INT_SWRST_MASK), |
| REGMAP_IRQ_REG(BD718XX_INT_PWRBTN_S, 0, BD718XX_INT_PWRBTN_S_MASK), |
| REGMAP_IRQ_REG(BD718XX_INT_PWRBTN_L, 0, BD718XX_INT_PWRBTN_L_MASK), |
| REGMAP_IRQ_REG(BD718XX_INT_PWRBTN, 0, BD718XX_INT_PWRBTN_MASK), |
| REGMAP_IRQ_REG(BD718XX_INT_WDOG, 0, BD718XX_INT_WDOG_MASK), |
| REGMAP_IRQ_REG(BD718XX_INT_ON_REQ, 0, BD718XX_INT_ON_REQ_MASK), |
| REGMAP_IRQ_REG(BD718XX_INT_STBY_REQ, 0, BD718XX_INT_STBY_REQ_MASK), |
| }; |
| |
| static struct regmap_irq_chip bd718xx_irq_chip = { |
| .name = "bd718xx-irq", |
| .irqs = bd718xx_irqs, |
| .num_irqs = ARRAY_SIZE(bd718xx_irqs), |
| .num_regs = 1, |
| .irq_reg_stride = 1, |
| .status_base = BD718XX_REG_IRQ, |
| .mask_base = BD718XX_REG_MIRQ, |
| .ack_base = BD718XX_REG_IRQ, |
| .init_ack_masked = true, |
| }; |
| |
| static const struct regmap_range pmic_status_range = { |
| .range_min = BD718XX_REG_IRQ, |
| .range_max = BD718XX_REG_POW_STATE, |
| }; |
| |
| static const struct regmap_access_table volatile_regs = { |
| .yes_ranges = &pmic_status_range, |
| .n_yes_ranges = 1, |
| }; |
| |
| static const struct regmap_config bd718xx_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_table = &volatile_regs, |
| .max_register = BD718XX_MAX_REGISTER - 1, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static int bd718xx_init_press_duration(struct regmap *regmap, |
| struct device *dev) |
| { |
| u32 short_press_ms, long_press_ms; |
| u32 short_press_value, long_press_value; |
| int ret; |
| |
| ret = of_property_read_u32(dev->of_node, "rohm,short-press-ms", |
| &short_press_ms); |
| if (!ret) { |
| short_press_value = min(15u, (short_press_ms + 250) / 500); |
| ret = regmap_update_bits(regmap, BD718XX_REG_PWRONCONFIG0, |
| BD718XX_PWRBTN_PRESS_DURATION_MASK, |
| short_press_value); |
| if (ret) { |
| dev_err(dev, "Failed to init pwron short press\n"); |
| return ret; |
| } |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "rohm,long-press-ms", |
| &long_press_ms); |
| if (!ret) { |
| long_press_value = min(15u, (long_press_ms + 500) / 1000); |
| ret = regmap_update_bits(regmap, BD718XX_REG_PWRONCONFIG1, |
| BD718XX_PWRBTN_PRESS_DURATION_MASK, |
| long_press_value); |
| if (ret) { |
| dev_err(dev, "Failed to init pwron long press\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int bd718xx_i2c_probe(struct i2c_client *i2c) |
| { |
| struct regmap *regmap; |
| struct regmap_irq_chip_data *irq_data; |
| int ret; |
| unsigned int chip_type; |
| struct mfd_cell *mfd; |
| int cells; |
| |
| if (!i2c->irq) { |
| dev_err(&i2c->dev, "No IRQ configured\n"); |
| return -EINVAL; |
| } |
| chip_type = (unsigned int)(uintptr_t) |
| of_device_get_match_data(&i2c->dev); |
| switch (chip_type) { |
| case ROHM_CHIP_TYPE_BD71837: |
| mfd = bd71837_mfd_cells; |
| cells = ARRAY_SIZE(bd71837_mfd_cells); |
| break; |
| case ROHM_CHIP_TYPE_BD71847: |
| mfd = bd71847_mfd_cells; |
| cells = ARRAY_SIZE(bd71847_mfd_cells); |
| break; |
| default: |
| dev_err(&i2c->dev, "Unknown device type"); |
| return -EINVAL; |
| } |
| |
| regmap = devm_regmap_init_i2c(i2c, &bd718xx_regmap_config); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(&i2c->dev, PTR_ERR(regmap), |
| "regmap initialization failed\n"); |
| |
| ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq, |
| IRQF_ONESHOT, 0, &bd718xx_irq_chip, |
| &irq_data); |
| if (ret) |
| return dev_err_probe(&i2c->dev, ret, "Failed to add irq_chip\n"); |
| |
| ret = bd718xx_init_press_duration(regmap, &i2c->dev); |
| if (ret) |
| return ret; |
| |
| ret = regmap_irq_get_virq(irq_data, BD718XX_INT_PWRBTN_S); |
| |
| if (ret < 0) |
| return dev_err_probe(&i2c->dev, ret, "Failed to get the IRQ\n"); |
| |
| button.irq = ret; |
| |
| ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, |
| mfd, cells, NULL, 0, |
| regmap_irq_get_domain(irq_data)); |
| if (ret) |
| dev_err_probe(&i2c->dev, ret, "Failed to create subdevices\n"); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id bd718xx_of_match[] = { |
| { |
| .compatible = "rohm,bd71837", |
| .data = (void *)ROHM_CHIP_TYPE_BD71837, |
| }, |
| { |
| .compatible = "rohm,bd71847", |
| .data = (void *)ROHM_CHIP_TYPE_BD71847, |
| }, |
| { |
| .compatible = "rohm,bd71850", |
| .data = (void *)ROHM_CHIP_TYPE_BD71847, |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, bd718xx_of_match); |
| |
| static struct i2c_driver bd718xx_i2c_driver = { |
| .driver = { |
| .name = "rohm-bd718x7", |
| .of_match_table = bd718xx_of_match, |
| }, |
| .probe = bd718xx_i2c_probe, |
| }; |
| |
| static int __init bd718xx_i2c_init(void) |
| { |
| return i2c_add_driver(&bd718xx_i2c_driver); |
| } |
| |
| /* Initialise early so consumer devices can complete system boot */ |
| subsys_initcall(bd718xx_i2c_init); |
| |
| static void __exit bd718xx_i2c_exit(void) |
| { |
| i2c_del_driver(&bd718xx_i2c_driver); |
| } |
| module_exit(bd718xx_i2c_exit); |
| |
| MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); |
| MODULE_DESCRIPTION("ROHM BD71837/BD71847 Power Management IC driver"); |
| MODULE_LICENSE("GPL"); |