| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Regulator device driver for DA9061 and DA9062. |
| // Copyright (C) 2015-2017 Dialog Semiconductor |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/mfd/da9062/core.h> |
| #include <linux/mfd/da9062/registers.h> |
| #include <dt-bindings/regulator/dlg,da9063-regulator.h> |
| |
| /* Regulator IDs */ |
| enum { |
| DA9061_ID_BUCK1, |
| DA9061_ID_BUCK2, |
| DA9061_ID_BUCK3, |
| DA9061_ID_LDO1, |
| DA9061_ID_LDO2, |
| DA9061_ID_LDO3, |
| DA9061_ID_LDO4, |
| DA9061_MAX_REGULATORS, |
| }; |
| |
| enum { |
| DA9062_ID_BUCK1, |
| DA9062_ID_BUCK2, |
| DA9062_ID_BUCK3, |
| DA9062_ID_BUCK4, |
| DA9062_ID_LDO1, |
| DA9062_ID_LDO2, |
| DA9062_ID_LDO3, |
| DA9062_ID_LDO4, |
| DA9062_MAX_REGULATORS, |
| }; |
| |
| /* Regulator capabilities and registers description */ |
| struct da9062_regulator_info { |
| struct regulator_desc desc; |
| /* Main register fields */ |
| struct reg_field mode; |
| struct reg_field suspend; |
| struct reg_field sleep; |
| struct reg_field suspend_sleep; |
| unsigned int suspend_vsel_reg; |
| /* Event detection bit */ |
| struct reg_field oc_event; |
| }; |
| |
| /* Single regulator settings */ |
| struct da9062_regulator { |
| struct regulator_desc desc; |
| struct regulator_dev *rdev; |
| struct da9062 *hw; |
| const struct da9062_regulator_info *info; |
| |
| struct regmap_field *mode; |
| struct regmap_field *suspend; |
| struct regmap_field *sleep; |
| struct regmap_field *suspend_sleep; |
| }; |
| |
| /* Encapsulates all information for the regulators driver */ |
| struct da9062_regulators { |
| int irq_ldo_lim; |
| unsigned n_regulators; |
| /* Array size to be defined during init. Keep at end. */ |
| struct da9062_regulator regulator[] __counted_by(n_regulators); |
| }; |
| |
| /* Regulator operations */ |
| |
| /* Current limits array (in uA) |
| * - DA9061_ID_[BUCK1|BUCK3] |
| * - DA9062_ID_[BUCK1|BUCK2|BUCK4] |
| * Entry indexes corresponds to register values. |
| */ |
| static const unsigned int da9062_buck_a_limits[] = { |
| 500000, 600000, 700000, 800000, 900000, 1000000, 1100000, 1200000, |
| 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000 |
| }; |
| |
| /* Current limits array (in uA) |
| * - DA9061_ID_BUCK2 |
| * - DA9062_ID_BUCK3 |
| * Entry indexes corresponds to register values. |
| */ |
| static const unsigned int da9062_buck_b_limits[] = { |
| 1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000, |
| 2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000 |
| }; |
| |
| static unsigned int da9062_map_buck_mode(unsigned int mode) |
| { |
| switch (mode) { |
| case DA9063_BUCK_MODE_SLEEP: |
| return REGULATOR_MODE_STANDBY; |
| case DA9063_BUCK_MODE_SYNC: |
| return REGULATOR_MODE_FAST; |
| case DA9063_BUCK_MODE_AUTO: |
| return REGULATOR_MODE_NORMAL; |
| default: |
| return REGULATOR_MODE_INVALID; |
| } |
| } |
| |
| static int da9062_buck_set_mode(struct regulator_dev *rdev, unsigned mode) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| unsigned val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| val = DA9063_BUCK_MODE_SYNC; |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = DA9063_BUCK_MODE_AUTO; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| val = DA9063_BUCK_MODE_SLEEP; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_field_write(regl->mode, val); |
| } |
| |
| /* |
| * Bucks use single mode register field for normal operation |
| * and suspend state. |
| * There are 3 modes to map to: FAST, NORMAL, and STANDBY. |
| */ |
| |
| static unsigned da9062_buck_get_mode(struct regulator_dev *rdev) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_field_read(regl->mode, &val); |
| if (ret < 0) |
| return ret; |
| |
| switch (val) { |
| default: |
| /* Sleep flag bit decides the mode */ |
| break; |
| case DA9063_BUCK_MODE_SLEEP: |
| return REGULATOR_MODE_STANDBY; |
| case DA9063_BUCK_MODE_SYNC: |
| return REGULATOR_MODE_FAST; |
| case DA9063_BUCK_MODE_AUTO: |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| ret = regmap_field_read(regl->sleep, &val); |
| if (ret < 0) |
| return 0; |
| |
| if (val) |
| return REGULATOR_MODE_STANDBY; |
| else |
| return REGULATOR_MODE_FAST; |
| } |
| |
| /* |
| * LDOs use sleep flags - one for normal and one for suspend state. |
| * There are 2 modes to map to: NORMAL and STANDBY (sleep) for each state. |
| */ |
| |
| static int da9062_ldo_set_mode(struct regulator_dev *rdev, unsigned mode) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| unsigned val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| val = 0; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| val = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_field_write(regl->sleep, val); |
| } |
| |
| static unsigned da9062_ldo_get_mode(struct regulator_dev *rdev) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| int ret, val; |
| |
| ret = regmap_field_read(regl->sleep, &val); |
| if (ret < 0) |
| return 0; |
| |
| if (val) |
| return REGULATOR_MODE_STANDBY; |
| else |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static int da9062_buck_get_status(struct regulator_dev *rdev) |
| { |
| int ret = regulator_is_enabled_regmap(rdev); |
| |
| if (ret == 0) { |
| ret = REGULATOR_STATUS_OFF; |
| } else if (ret > 0) { |
| ret = da9062_buck_get_mode(rdev); |
| if (ret > 0) |
| ret = regulator_mode_to_status(ret); |
| else if (ret == 0) |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static int da9062_ldo_get_status(struct regulator_dev *rdev) |
| { |
| int ret = regulator_is_enabled_regmap(rdev); |
| |
| if (ret == 0) { |
| ret = REGULATOR_STATUS_OFF; |
| } else if (ret > 0) { |
| ret = da9062_ldo_get_mode(rdev); |
| if (ret > 0) |
| ret = regulator_mode_to_status(ret); |
| else if (ret == 0) |
| ret = -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static int da9062_set_suspend_voltage(struct regulator_dev *rdev, int uv) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| const struct da9062_regulator_info *rinfo = regl->info; |
| int ret, sel; |
| |
| sel = regulator_map_voltage_linear(rdev, uv, uv); |
| if (sel < 0) |
| return sel; |
| |
| sel <<= ffs(rdev->desc->vsel_mask) - 1; |
| |
| ret = regmap_update_bits(regl->hw->regmap, rinfo->suspend_vsel_reg, |
| rdev->desc->vsel_mask, sel); |
| |
| return ret; |
| } |
| |
| static int da9062_suspend_enable(struct regulator_dev *rdev) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| |
| return regmap_field_write(regl->suspend, 1); |
| } |
| |
| static int da9062_suspend_disable(struct regulator_dev *rdev) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| |
| return regmap_field_write(regl->suspend, 0); |
| } |
| |
| static int da9062_buck_set_suspend_mode(struct regulator_dev *rdev, |
| unsigned mode) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| int val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| val = DA9063_BUCK_MODE_SYNC; |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = DA9063_BUCK_MODE_AUTO; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| val = DA9063_BUCK_MODE_SLEEP; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_field_write(regl->mode, val); |
| } |
| |
| static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev, |
| unsigned mode) |
| { |
| struct da9062_regulator *regl = rdev_get_drvdata(rdev); |
| unsigned val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| val = 0; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| val = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_field_write(regl->suspend_sleep, val); |
| } |
| |
| static const struct regulator_ops da9062_buck_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .set_current_limit = regulator_set_current_limit_regmap, |
| .get_current_limit = regulator_get_current_limit_regmap, |
| .set_mode = da9062_buck_set_mode, |
| .get_mode = da9062_buck_get_mode, |
| .get_status = da9062_buck_get_status, |
| .set_suspend_voltage = da9062_set_suspend_voltage, |
| .set_suspend_enable = da9062_suspend_enable, |
| .set_suspend_disable = da9062_suspend_disable, |
| .set_suspend_mode = da9062_buck_set_suspend_mode, |
| }; |
| |
| static const struct regulator_ops da9062_ldo_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .set_mode = da9062_ldo_set_mode, |
| .get_mode = da9062_ldo_get_mode, |
| .get_status = da9062_ldo_get_status, |
| .set_suspend_voltage = da9062_set_suspend_voltage, |
| .set_suspend_enable = da9062_suspend_enable, |
| .set_suspend_disable = da9062_suspend_disable, |
| .set_suspend_mode = da9062_ldo_set_suspend_mode, |
| }; |
| |
| /* DA9061 Regulator information */ |
| static const struct da9062_regulator_info local_da9061_regulator_info[] = { |
| { |
| .desc.id = DA9061_ID_BUCK1, |
| .desc.name = "DA9061 BUCK1", |
| .desc.of_match = of_match_ptr("buck1"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_buck_ops, |
| .desc.min_uV = (300) * 1000, |
| .desc.uV_step = (10) * 1000, |
| .desc.n_voltages = ((1570) - (300))/(10) + 1, |
| .desc.curr_table = da9062_buck_a_limits, |
| .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits), |
| .desc.csel_reg = DA9062AA_BUCK_ILIM_C, |
| .desc.csel_mask = DA9062AA_BUCK1_ILIM_MASK, |
| .desc.enable_reg = DA9062AA_BUCK1_CONT, |
| .desc.enable_mask = DA9062AA_BUCK1_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VBUCK1_A, |
| .desc.vsel_mask = DA9062AA_VBUCK1_A_MASK, |
| .desc.linear_min_sel = 0, |
| .desc.of_map_mode = da9062_map_buck_mode, |
| .sleep = REG_FIELD(DA9062AA_VBUCK1_A, |
| __builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B, |
| __builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VBUCK1_B, |
| .mode = REG_FIELD(DA9062AA_BUCK1_CFG, |
| __builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1), |
| .suspend = REG_FIELD(DA9062AA_BUCK1_CONT, |
| __builtin_ffs((int)DA9062AA_BUCK1_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_BUCK1_CONF_MASK) - 1), |
| }, |
| { |
| .desc.id = DA9061_ID_BUCK2, |
| .desc.name = "DA9061 BUCK2", |
| .desc.of_match = of_match_ptr("buck2"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_buck_ops, |
| .desc.min_uV = (800) * 1000, |
| .desc.uV_step = (20) * 1000, |
| .desc.n_voltages = ((3340) - (800))/(20) + 1, |
| .desc.curr_table = da9062_buck_b_limits, |
| .desc.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits), |
| .desc.csel_reg = DA9062AA_BUCK_ILIM_A, |
| .desc.csel_mask = DA9062AA_BUCK3_ILIM_MASK, |
| .desc.enable_reg = DA9062AA_BUCK3_CONT, |
| .desc.enable_mask = DA9062AA_BUCK3_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VBUCK3_A, |
| .desc.vsel_mask = DA9062AA_VBUCK3_A_MASK, |
| .desc.linear_min_sel = 0, |
| .desc.of_map_mode = da9062_map_buck_mode, |
| .sleep = REG_FIELD(DA9062AA_VBUCK3_A, |
| __builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B, |
| __builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VBUCK3_B, |
| .mode = REG_FIELD(DA9062AA_BUCK3_CFG, |
| __builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1), |
| .suspend = REG_FIELD(DA9062AA_BUCK3_CONT, |
| __builtin_ffs((int)DA9062AA_BUCK3_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_BUCK3_CONF_MASK) - 1), |
| }, |
| { |
| .desc.id = DA9061_ID_BUCK3, |
| .desc.name = "DA9061 BUCK3", |
| .desc.of_match = of_match_ptr("buck3"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_buck_ops, |
| .desc.min_uV = (530) * 1000, |
| .desc.uV_step = (10) * 1000, |
| .desc.n_voltages = ((1800) - (530))/(10) + 1, |
| .desc.curr_table = da9062_buck_a_limits, |
| .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits), |
| .desc.csel_reg = DA9062AA_BUCK_ILIM_B, |
| .desc.csel_mask = DA9062AA_BUCK4_ILIM_MASK, |
| .desc.enable_reg = DA9062AA_BUCK4_CONT, |
| .desc.enable_mask = DA9062AA_BUCK4_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VBUCK4_A, |
| .desc.vsel_mask = DA9062AA_VBUCK4_A_MASK, |
| .desc.linear_min_sel = 0, |
| .desc.of_map_mode = da9062_map_buck_mode, |
| .sleep = REG_FIELD(DA9062AA_VBUCK4_A, |
| __builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B, |
| __builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VBUCK4_B, |
| .mode = REG_FIELD(DA9062AA_BUCK4_CFG, |
| __builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1), |
| .suspend = REG_FIELD(DA9062AA_BUCK4_CONT, |
| __builtin_ffs((int)DA9062AA_BUCK4_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_BUCK4_CONF_MASK) - 1), |
| }, |
| { |
| .desc.id = DA9061_ID_LDO1, |
| .desc.name = "DA9061 LDO1", |
| .desc.of_match = of_match_ptr("ldo1"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO1_CONT, |
| .desc.enable_mask = DA9062AA_LDO1_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO1_A, |
| .desc.vsel_mask = DA9062AA_VLDO1_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO1_A, |
| __builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B, |
| __builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO1_B, |
| .suspend = REG_FIELD(DA9062AA_LDO1_CONT, |
| __builtin_ffs((int)DA9062AA_LDO1_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO1_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1), |
| }, |
| { |
| .desc.id = DA9061_ID_LDO2, |
| .desc.name = "DA9061 LDO2", |
| .desc.of_match = of_match_ptr("ldo2"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO2_CONT, |
| .desc.enable_mask = DA9062AA_LDO2_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO2_A, |
| .desc.vsel_mask = DA9062AA_VLDO2_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO2_A, |
| __builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B, |
| __builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO2_B, |
| .suspend = REG_FIELD(DA9062AA_LDO2_CONT, |
| __builtin_ffs((int)DA9062AA_LDO2_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO2_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1), |
| }, |
| { |
| .desc.id = DA9061_ID_LDO3, |
| .desc.name = "DA9061 LDO3", |
| .desc.of_match = of_match_ptr("ldo3"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO3_CONT, |
| .desc.enable_mask = DA9062AA_LDO3_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO3_A, |
| .desc.vsel_mask = DA9062AA_VLDO3_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO3_A, |
| __builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B, |
| __builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO3_B, |
| .suspend = REG_FIELD(DA9062AA_LDO3_CONT, |
| __builtin_ffs((int)DA9062AA_LDO3_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO3_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1), |
| }, |
| { |
| .desc.id = DA9061_ID_LDO4, |
| .desc.name = "DA9061 LDO4", |
| .desc.of_match = of_match_ptr("ldo4"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO4_CONT, |
| .desc.enable_mask = DA9062AA_LDO4_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO4_A, |
| .desc.vsel_mask = DA9062AA_VLDO4_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO4_A, |
| __builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B, |
| __builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO4_B, |
| .suspend = REG_FIELD(DA9062AA_LDO4_CONT, |
| __builtin_ffs((int)DA9062AA_LDO4_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO4_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1), |
| }, |
| }; |
| |
| /* DA9062 Regulator information */ |
| static const struct da9062_regulator_info local_da9062_regulator_info[] = { |
| { |
| .desc.id = DA9062_ID_BUCK1, |
| .desc.name = "DA9062 BUCK1", |
| .desc.of_match = of_match_ptr("buck1"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_buck_ops, |
| .desc.min_uV = (300) * 1000, |
| .desc.uV_step = (10) * 1000, |
| .desc.n_voltages = ((1570) - (300))/(10) + 1, |
| .desc.curr_table = da9062_buck_a_limits, |
| .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits), |
| .desc.csel_reg = DA9062AA_BUCK_ILIM_C, |
| .desc.csel_mask = DA9062AA_BUCK1_ILIM_MASK, |
| .desc.enable_reg = DA9062AA_BUCK1_CONT, |
| .desc.enable_mask = DA9062AA_BUCK1_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VBUCK1_A, |
| .desc.vsel_mask = DA9062AA_VBUCK1_A_MASK, |
| .desc.linear_min_sel = 0, |
| .desc.of_map_mode = da9062_map_buck_mode, |
| .sleep = REG_FIELD(DA9062AA_VBUCK1_A, |
| __builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B, |
| __builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VBUCK1_B, |
| .mode = REG_FIELD(DA9062AA_BUCK1_CFG, |
| __builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1), |
| .suspend = REG_FIELD(DA9062AA_BUCK1_CONT, |
| __builtin_ffs((int)DA9062AA_BUCK1_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_BUCK1_CONF_MASK) - 1), |
| }, |
| { |
| .desc.id = DA9062_ID_BUCK2, |
| .desc.name = "DA9062 BUCK2", |
| .desc.of_match = of_match_ptr("buck2"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_buck_ops, |
| .desc.min_uV = (300) * 1000, |
| .desc.uV_step = (10) * 1000, |
| .desc.n_voltages = ((1570) - (300))/(10) + 1, |
| .desc.curr_table = da9062_buck_a_limits, |
| .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits), |
| .desc.csel_reg = DA9062AA_BUCK_ILIM_C, |
| .desc.csel_mask = DA9062AA_BUCK2_ILIM_MASK, |
| .desc.enable_reg = DA9062AA_BUCK2_CONT, |
| .desc.enable_mask = DA9062AA_BUCK2_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VBUCK2_A, |
| .desc.vsel_mask = DA9062AA_VBUCK2_A_MASK, |
| .desc.linear_min_sel = 0, |
| .desc.of_map_mode = da9062_map_buck_mode, |
| .sleep = REG_FIELD(DA9062AA_VBUCK2_A, |
| __builtin_ffs((int)DA9062AA_BUCK2_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK2_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VBUCK2_B, |
| __builtin_ffs((int)DA9062AA_BUCK2_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK2_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VBUCK2_B, |
| .mode = REG_FIELD(DA9062AA_BUCK2_CFG, |
| __builtin_ffs((int)DA9062AA_BUCK2_MODE_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK2_MODE_MASK)) - 1), |
| .suspend = REG_FIELD(DA9062AA_BUCK2_CONT, |
| __builtin_ffs((int)DA9062AA_BUCK2_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_BUCK2_CONF_MASK) - 1), |
| }, |
| { |
| .desc.id = DA9062_ID_BUCK3, |
| .desc.name = "DA9062 BUCK3", |
| .desc.of_match = of_match_ptr("buck3"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_buck_ops, |
| .desc.min_uV = (800) * 1000, |
| .desc.uV_step = (20) * 1000, |
| .desc.n_voltages = ((3340) - (800))/(20) + 1, |
| .desc.curr_table = da9062_buck_b_limits, |
| .desc.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits), |
| .desc.csel_reg = DA9062AA_BUCK_ILIM_A, |
| .desc.csel_mask = DA9062AA_BUCK3_ILIM_MASK, |
| .desc.enable_reg = DA9062AA_BUCK3_CONT, |
| .desc.enable_mask = DA9062AA_BUCK3_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VBUCK3_A, |
| .desc.vsel_mask = DA9062AA_VBUCK3_A_MASK, |
| .desc.linear_min_sel = 0, |
| .desc.of_map_mode = da9062_map_buck_mode, |
| .sleep = REG_FIELD(DA9062AA_VBUCK3_A, |
| __builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B, |
| __builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VBUCK3_B, |
| .mode = REG_FIELD(DA9062AA_BUCK3_CFG, |
| __builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1), |
| .suspend = REG_FIELD(DA9062AA_BUCK3_CONT, |
| __builtin_ffs((int)DA9062AA_BUCK3_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_BUCK3_CONF_MASK) - 1), |
| }, |
| { |
| .desc.id = DA9062_ID_BUCK4, |
| .desc.name = "DA9062 BUCK4", |
| .desc.of_match = of_match_ptr("buck4"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_buck_ops, |
| .desc.min_uV = (530) * 1000, |
| .desc.uV_step = (10) * 1000, |
| .desc.n_voltages = ((1800) - (530))/(10) + 1, |
| .desc.curr_table = da9062_buck_a_limits, |
| .desc.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits), |
| .desc.csel_reg = DA9062AA_BUCK_ILIM_B, |
| .desc.csel_mask = DA9062AA_BUCK4_ILIM_MASK, |
| .desc.enable_reg = DA9062AA_BUCK4_CONT, |
| .desc.enable_mask = DA9062AA_BUCK4_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VBUCK4_A, |
| .desc.vsel_mask = DA9062AA_VBUCK4_A_MASK, |
| .desc.linear_min_sel = 0, |
| .desc.of_map_mode = da9062_map_buck_mode, |
| .sleep = REG_FIELD(DA9062AA_VBUCK4_A, |
| __builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B, |
| __builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VBUCK4_B, |
| .mode = REG_FIELD(DA9062AA_BUCK4_CFG, |
| __builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1), |
| .suspend = REG_FIELD(DA9062AA_BUCK4_CONT, |
| __builtin_ffs((int)DA9062AA_BUCK4_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_BUCK4_CONF_MASK) - 1), |
| }, |
| { |
| .desc.id = DA9062_ID_LDO1, |
| .desc.name = "DA9062 LDO1", |
| .desc.of_match = of_match_ptr("ldo1"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO1_CONT, |
| .desc.enable_mask = DA9062AA_LDO1_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO1_A, |
| .desc.vsel_mask = DA9062AA_VLDO1_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO1_A, |
| __builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B, |
| __builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO1_B, |
| .suspend = REG_FIELD(DA9062AA_LDO1_CONT, |
| __builtin_ffs((int)DA9062AA_LDO1_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO1_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1), |
| }, |
| { |
| .desc.id = DA9062_ID_LDO2, |
| .desc.name = "DA9062 LDO2", |
| .desc.of_match = of_match_ptr("ldo2"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO2_CONT, |
| .desc.enable_mask = DA9062AA_LDO2_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO2_A, |
| .desc.vsel_mask = DA9062AA_VLDO2_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO2_A, |
| __builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B, |
| __builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO2_B, |
| .suspend = REG_FIELD(DA9062AA_LDO2_CONT, |
| __builtin_ffs((int)DA9062AA_LDO2_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO2_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1), |
| }, |
| { |
| .desc.id = DA9062_ID_LDO3, |
| .desc.name = "DA9062 LDO3", |
| .desc.of_match = of_match_ptr("ldo3"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO3_CONT, |
| .desc.enable_mask = DA9062AA_LDO3_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO3_A, |
| .desc.vsel_mask = DA9062AA_VLDO3_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO3_A, |
| __builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B, |
| __builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO3_B, |
| .suspend = REG_FIELD(DA9062AA_LDO3_CONT, |
| __builtin_ffs((int)DA9062AA_LDO3_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO3_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1), |
| }, |
| { |
| .desc.id = DA9062_ID_LDO4, |
| .desc.name = "DA9062 LDO4", |
| .desc.of_match = of_match_ptr("ldo4"), |
| .desc.regulators_node = of_match_ptr("regulators"), |
| .desc.ops = &da9062_ldo_ops, |
| .desc.min_uV = (900) * 1000, |
| .desc.uV_step = (50) * 1000, |
| .desc.n_voltages = ((3600) - (900))/(50) + 1 |
| + DA9062AA_VLDO_A_MIN_SEL, |
| .desc.enable_reg = DA9062AA_LDO4_CONT, |
| .desc.enable_mask = DA9062AA_LDO4_EN_MASK, |
| .desc.vsel_reg = DA9062AA_VLDO4_A, |
| .desc.vsel_mask = DA9062AA_VLDO4_A_MASK, |
| .desc.linear_min_sel = DA9062AA_VLDO_A_MIN_SEL, |
| .sleep = REG_FIELD(DA9062AA_VLDO4_A, |
| __builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1), |
| .suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B, |
| __builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1), |
| .suspend_vsel_reg = DA9062AA_VLDO4_B, |
| .suspend = REG_FIELD(DA9062AA_LDO4_CONT, |
| __builtin_ffs((int)DA9062AA_LDO4_CONF_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz(DA9062AA_LDO4_CONF_MASK) - 1), |
| .oc_event = REG_FIELD(DA9062AA_STATUS_D, |
| __builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1, |
| sizeof(unsigned int) * 8 - |
| __builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1), |
| }, |
| }; |
| |
| /* Regulator interrupt handlers */ |
| static irqreturn_t da9062_ldo_lim_event(int irq, void *data) |
| { |
| struct da9062_regulators *regulators = data; |
| struct da9062 *hw = regulators->regulator[0].hw; |
| struct da9062_regulator *regl; |
| int handled = IRQ_NONE; |
| int bits, i, ret; |
| |
| ret = regmap_read(hw->regmap, DA9062AA_STATUS_D, &bits); |
| if (ret < 0) { |
| dev_err(hw->dev, |
| "Failed to read LDO overcurrent indicator\n"); |
| goto ldo_lim_error; |
| } |
| |
| for (i = regulators->n_regulators - 1; i >= 0; i--) { |
| regl = ®ulators->regulator[i]; |
| if (regl->info->oc_event.reg != DA9062AA_STATUS_D) |
| continue; |
| |
| if (BIT(regl->info->oc_event.lsb) & bits) { |
| regulator_notifier_call_chain(regl->rdev, |
| REGULATOR_EVENT_OVER_CURRENT, NULL); |
| handled = IRQ_HANDLED; |
| } |
| } |
| |
| ldo_lim_error: |
| return handled; |
| } |
| |
| static int da9062_regulator_probe(struct platform_device *pdev) |
| { |
| struct da9062 *chip = dev_get_drvdata(pdev->dev.parent); |
| struct da9062_regulators *regulators; |
| struct da9062_regulator *regl; |
| struct regulator_config config = { }; |
| const struct da9062_regulator_info *rinfo; |
| int n, ret; |
| int max_regulators; |
| |
| switch (chip->chip_type) { |
| case COMPAT_TYPE_DA9061: |
| max_regulators = DA9061_MAX_REGULATORS; |
| rinfo = local_da9061_regulator_info; |
| break; |
| case COMPAT_TYPE_DA9062: |
| max_regulators = DA9062_MAX_REGULATORS; |
| rinfo = local_da9062_regulator_info; |
| break; |
| default: |
| dev_err(chip->dev, "Unrecognised chip type\n"); |
| return -ENODEV; |
| } |
| |
| /* Allocate memory required by usable regulators */ |
| regulators = devm_kzalloc(&pdev->dev, struct_size(regulators, regulator, |
| max_regulators), GFP_KERNEL); |
| if (!regulators) |
| return -ENOMEM; |
| |
| regulators->n_regulators = max_regulators; |
| platform_set_drvdata(pdev, regulators); |
| |
| for (n = 0; n < regulators->n_regulators; n++) { |
| /* Initialise regulator structure */ |
| regl = ®ulators->regulator[n]; |
| regl->hw = chip; |
| regl->info = &rinfo[n]; |
| regl->desc = regl->info->desc; |
| regl->desc.type = REGULATOR_VOLTAGE; |
| regl->desc.owner = THIS_MODULE; |
| |
| if (regl->info->mode.reg) { |
| regl->mode = devm_regmap_field_alloc( |
| &pdev->dev, |
| chip->regmap, |
| regl->info->mode); |
| if (IS_ERR(regl->mode)) |
| return PTR_ERR(regl->mode); |
| } |
| |
| if (regl->info->suspend.reg) { |
| regl->suspend = devm_regmap_field_alloc( |
| &pdev->dev, |
| chip->regmap, |
| regl->info->suspend); |
| if (IS_ERR(regl->suspend)) |
| return PTR_ERR(regl->suspend); |
| } |
| |
| if (regl->info->sleep.reg) { |
| regl->sleep = devm_regmap_field_alloc( |
| &pdev->dev, |
| chip->regmap, |
| regl->info->sleep); |
| if (IS_ERR(regl->sleep)) |
| return PTR_ERR(regl->sleep); |
| } |
| |
| if (regl->info->suspend_sleep.reg) { |
| regl->suspend_sleep = devm_regmap_field_alloc( |
| &pdev->dev, |
| chip->regmap, |
| regl->info->suspend_sleep); |
| if (IS_ERR(regl->suspend_sleep)) |
| return PTR_ERR(regl->suspend_sleep); |
| } |
| |
| /* Register regulator */ |
| memset(&config, 0, sizeof(config)); |
| config.dev = chip->dev; |
| config.driver_data = regl; |
| config.regmap = chip->regmap; |
| |
| regl->rdev = devm_regulator_register(&pdev->dev, ®l->desc, |
| &config); |
| if (IS_ERR(regl->rdev)) { |
| dev_err(&pdev->dev, |
| "Failed to register %s regulator\n", |
| regl->desc.name); |
| return PTR_ERR(regl->rdev); |
| } |
| } |
| |
| /* LDOs overcurrent event support */ |
| regulators->irq_ldo_lim = platform_get_irq_byname_optional(pdev, "LDO_LIM"); |
| if (regulators->irq_ldo_lim < 0) |
| return 0; |
| |
| ret = devm_request_threaded_irq(&pdev->dev, regulators->irq_ldo_lim, |
| NULL, da9062_ldo_lim_event, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "LDO_LIM", regulators); |
| if (ret) { |
| dev_warn(&pdev->dev, |
| "Failed to request LDO_LIM IRQ.\n"); |
| regulators->irq_ldo_lim = -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver da9062_regulator_driver = { |
| .driver = { |
| .name = "da9062-regulators", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = da9062_regulator_probe, |
| }; |
| |
| static int __init da9062_regulator_init(void) |
| { |
| return platform_driver_register(&da9062_regulator_driver); |
| } |
| subsys_initcall(da9062_regulator_init); |
| |
| static void __exit da9062_regulator_cleanup(void) |
| { |
| platform_driver_unregister(&da9062_regulator_driver); |
| } |
| module_exit(da9062_regulator_cleanup); |
| |
| /* Module information */ |
| MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>"); |
| MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062 and DA9061"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:da9062-regulators"); |