drivers/isdn/hisax/sedlbauer_cs.c - linux - Git at Google

 /*======================================================================

     A Sedlbauer PCMCIA client driver

     This driver is for the Sedlbauer Speed Star and Speed Star II,
     which are ISDN PCMCIA Cards.

     The contents of this file are subject to the Mozilla Public
     License Version 1.1 (the "License"); you may not use this file
     except in compliance with the License. You may obtain a copy of
     the License at http://www.mozilla.org/MPL/

     Software distributed under the License is distributed on an "AS
     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
     implied. See the License for the specific language governing
     rights and limitations under the License.

     The initial developer of the original code is David A. Hinds
     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

     Modifications from dummy_cs.c are Copyright (C) 1999-2001 Marcus Niemann
     <maniemann@users.sourceforge.net>. All Rights Reserved.

     Alternatively, the contents of this file may be used under the
     terms of the GNU General Public License version 2 (the "GPL"), in
     which case the provisions of the GPL are applicable instead of the
     above.  If you wish to allow the use of your version of this file
     only under the terms of the GPL and not to allow others to use
     your version of this file under the MPL, indicate your decision
     by deleting the provisions above and replace them with the notice
     and other provisions required by the GPL.  If you do not delete
     the provisions above, a recipient may use your version of this
     file under either the MPL or the GPL.

 ======================================================================*/

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/system.h>

 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
 #include "hisax_cfg.h"

 MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards");
 MODULE_AUTHOR("Marcus Niemann");
 MODULE_LICENSE("Dual MPL/GPL");


 /*====================================================================*/

 /* Parameters that can be set with 'insmod' */

 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);

 /*====================================================================*/

 /*
    The event() function is this driver's Card Services event handler.
    It will be called by Card Services when an appropriate card status
    event is received.  The config() and release() entry points are
    used to configure or release a socket, in response to card
    insertion and ejection events.  They are invoked from the sedlbauer
    event handler.
 */

 static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
 static void sedlbauer_release(struct pcmcia_device *link);

 /*
    The attach() and detach() entry points are used to create and destroy
    "instances" of the driver, where each instance represents everything
    needed to manage one actual PCMCIA card.
 */

 static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;

 typedef struct local_info_t {
 	struct pcmcia_device	*p_dev;
     int			stop;
     int			cardnr;
 } local_info_t;

 /*======================================================================

     sedlbauer_attach() creates an "instance" of the driver, allocating
     local data structures for one device.  The device is registered
     with Card Services.

     The dev_link structure is initialized, but we don't actually
     configure the card at this point -- we wait until we receive a
     card insertion event.

 ======================================================================*/

 static int __devinit sedlbauer_probe(struct pcmcia_device *link)
 {
     local_info_t *local;

     dev_dbg(&link->dev, "sedlbauer_attach()\n");

     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
     if (!local) return -ENOMEM;
     local->cardnr = -1;

     local->p_dev = link;
     link->priv = local;

     /*
       General socket configuration defaults can go here.  In this
       client, we assume very little, and rely on the CIS for almost
       everything.  In most clients, many details (i.e., number, sizes,
       and attributes of IO windows) are fixed by the nature of the
       device, and can be hard-wired here.
     */

     /* from old sedl_cs
     */
     /* The io structure describes IO port mapping */
     link->resource[0]->end = 8;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;

     link->conf.Attributes = 0;
     link->conf.IntType = INT_MEMORY_AND_IO;

     return sedlbauer_config(link);
 } /* sedlbauer_attach */

 /*======================================================================

     This deletes a driver "instance".  The device is de-registered
     with Card Services.  If it has been released, all local data
     structures are freed.  Otherwise, the structures will be freed
     when the device is released.

 ======================================================================*/

 static void __devexit sedlbauer_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);

 	((local_info_t *)link->priv)->stop = 1;
 	sedlbauer_release(link);

 	/* This points to the parent local_info_t struct */
 	kfree(link->priv);
 } /* sedlbauer_detach */

 /*======================================================================

     sedlbauer_config() is scheduled to run after a CARD_INSERTION event
     is received, to configure the PCMCIA socket, and to make the
     device available to the system.

 ======================================================================*/
 static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  cistpl_cftable_entry_t *dflt,
 				  unsigned int vcc,
 				  void *priv_data)
 {
 	if (cfg->index == 0)
 		return -ENODEV;

 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
 		p_dev->conf.Status = CCSR_AUDIO_ENA;
 	}

 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
 		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
 	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
 		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
 	}

 	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;

 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;

 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->resource[0]->start = io->win[0].base;
 		p_dev->resource[0]->end = io->win[0].len;
 		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 		p_dev->resource[0]->flags |=
 					pcmcia_io_cfg_data_width(io->flags);
 		if (io->nwin > 1) {
 			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
 			p_dev->resource[1]->start = io->win[1].base;
 			p_dev->resource[1]->end = io->win[1].len;
 		}
 		/* This reserves IO space but doesn't actually enable it */
 		p_dev->io_lines = 3;
 		if (pcmcia_request_io(p_dev) != 0)
 			return -ENODEV;
 	}

 	return 0;
 }


 static int __devinit sedlbauer_config(struct pcmcia_device *link)
 {
     int ret;
     IsdnCard_t  icard;

     dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);

     /*
       In this loop, we scan the CIS for configuration table entries,
       each of which describes a valid card configuration, including
       voltage, IO window, memory window, and interrupt settings.

       We make no assumptions about the card to be configured: we use
       just the information available in the CIS.  In an ideal world,
       this would work for any PCMCIA card, but it requires a complete
       and accurate CIS.  In practice, a driver usually "knows" most of
       these things without consulting the CIS, and most client drivers
       will only use the CIS to fill in implementation-defined details.
     */
     ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
     if (ret)
 	    goto failed;

     /*
        This actually configures the PCMCIA socket -- setting up
        the I/O windows and the interrupt mapping, and putting the
        card and host interface into "Memory and IO" mode.
     */
     ret = pcmcia_request_configuration(link, &link->conf);
     if (ret)
 	    goto failed;

     /* Finally, report what we've done */
     dev_info(&link->dev, "index 0x%02x:",
 	   link->conf.ConfigIndex);
     if (link->conf.Vpp)
 	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
 	printk(", irq %d", link->irq);
     if (link->resource[0])
 	printk(" & %pR", link->resource[0]);
     if (link->resource[1])
 	printk(" & %pR", link->resource[1]);
     printk("\n");

     icard.para[0] = link->irq;
     icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;

     ret = hisax_init_pcmcia(link,
 			    &(((local_info_t *)link->priv)->stop), &icard);
     if (ret < 0) {
 	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n",
 		ret, link->resource[0]);
     	sedlbauer_release(link);
 	return -ENODEV;
     } else
 	((local_info_t *)link->priv)->cardnr = ret;

     return 0;

 failed:
     sedlbauer_release(link);
     return -ENODEV;

 } /* sedlbauer_config */

 /*======================================================================

     After a card is removed, sedlbauer_release() will unregister the
     device, and release the PCMCIA configuration.  If the device is
     still open, this will be postponed until it is closed.

 ======================================================================*/

 static void sedlbauer_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
     dev_dbg(&link->dev, "sedlbauer_release(0x%p)\n", link);

     if (local) {
     	if (local->cardnr >= 0) {
     	    /* no unregister function with hisax */
 	    HiSax_closecard(local->cardnr);
 	}
     }

     pcmcia_disable_device(link);
 } /* sedlbauer_release */

 static int sedlbauer_suspend(struct pcmcia_device *link)
 {
 	local_info_t *dev = link->priv;

 	dev->stop = 1;

 	return 0;
 }

 static int sedlbauer_resume(struct pcmcia_device *link)
 {
 	local_info_t *dev = link->priv;

 	dev->stop = 0;

 	return 0;
 }


 static struct pcmcia_device_id sedlbauer_ids[] = {
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "speed star II", "V 3.1", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D67", 0x81fb79f5, 0xe4e9bc12, 0x397b7e90),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D98", 0x81fb79f5, 0xe4e9bc12, 0x2e5c7fce),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (C) 93-94 VK", 0x81fb79f5, 0xe4e9bc12, 0x8db143fe),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (c) 93-95 VK", 0x81fb79f5, 0xe4e9bc12, 0xb391ab4c),
 	PCMCIA_DEVICE_PROD_ID12("HST High Soft Tech GmbH", "Saphir II B", 0xd79e0b84, 0x21d083ae),
 /*	PCMCIA_DEVICE_PROD_ID1234("SEDLBAUER", 0x81fb79f5), */ /* too generic*/
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);

 static struct pcmcia_driver sedlbauer_driver = {
 	.owner		= THIS_MODULE,
 	.drv		= {
 		.name	= "sedlbauer_cs",
 	},
 	.probe		= sedlbauer_probe,
 	.remove		= __devexit_p(sedlbauer_detach),
 	.id_table	= sedlbauer_ids,
 	.suspend	= sedlbauer_suspend,
 	.resume		= sedlbauer_resume,
 };

 static int __init init_sedlbauer_cs(void)
 {
 	return pcmcia_register_driver(&sedlbauer_driver);
 }

 static void __exit exit_sedlbauer_cs(void)
 {
 	pcmcia_unregister_driver(&sedlbauer_driver);
 }

 module_init(init_sedlbauer_cs);
 module_exit(exit_sedlbauer_cs);
	/*======================================================================

	A Sedlbauer PCMCIA client driver

	This driver is for the Sedlbauer Speed Star and Speed Star II,
	which are ISDN PCMCIA Cards.

	The contents of this file are subject to the Mozilla Public
	License Version 1.1 (the "License"); you may not use this file
	except in compliance with the License. You may obtain a copy of
	the License at http://www.mozilla.org/MPL/

	Software distributed under the License is distributed on an "AS
	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	implied. See the License for the specific language governing
	rights and limitations under the License.

	The initial developer of the original code is David A. Hinds
	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.

	Modifications from dummy_cs.c are Copyright (C) 1999-2001 Marcus Niemann
	<maniemann@users.sourceforge.net>. All Rights Reserved.

	Alternatively, the contents of this file may be used under the
	terms of the GNU General Public License version 2 (the "GPL"), in
	which case the provisions of the GPL are applicable instead of the
	above. If you wish to allow the use of your version of this file
	only under the terms of the GPL and not to allow others to use
	your version of this file under the MPL, indicate your decision
	by deleting the provisions above and replace them with the notice
	and other provisions required by the GPL. If you do not delete
	the provisions above, a recipient may use your version of this
	file under either the MPL or the GPL.

	======================================================================*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/ptrace.h>
	#include <linux/slab.h>
	#include <linux/string.h>
	#include <linux/timer.h>
	#include <linux/ioport.h>
	#include <asm/io.h>
	#include <asm/system.h>

	#include <pcmcia/cs.h>
	#include <pcmcia/cistpl.h>
	#include <pcmcia/cisreg.h>
	#include <pcmcia/ds.h>
	#include "hisax_cfg.h"

	MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards");
	MODULE_AUTHOR("Marcus Niemann");
	MODULE_LICENSE("Dual MPL/GPL");


	/====================================================================/

	/* Parameters that can be set with 'insmod' */

	static int protocol = 2; /* EURO-ISDN Default */
	module_param(protocol, int, 0);

	/====================================================================/

	/*
	The event() function is this driver's Card Services event handler.
	It will be called by Card Services when an appropriate card status
	event is received. The config() and release() entry points are
	used to configure or release a socket, in response to card
	insertion and ejection events. They are invoked from the sedlbauer
	event handler.
	*/

	static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
	static void sedlbauer_release(struct pcmcia_device *link);

	/*
	The attach() and detach() entry points are used to create and destroy
	"instances" of the driver, where each instance represents everything
	needed to manage one actual PCMCIA card.
	*/

	static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;

	typedef struct local_info_t {
	struct pcmcia_device *p_dev;
	int stop;
	int cardnr;
	} local_info_t;

	/*======================================================================

	sedlbauer_attach() creates an "instance" of the driver, allocating
	local data structures for one device. The device is registered
	with Card Services.

	The dev_link structure is initialized, but we don't actually
	configure the card at this point -- we wait until we receive a
	card insertion event.

	======================================================================*/

	static int __devinit sedlbauer_probe(struct pcmcia_device *link)
	{
	local_info_t *local;

	dev_dbg(&link->dev, "sedlbauer_attach()\n");

	/* Allocate space for private device-specific data */
	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
	if (!local) return -ENOMEM;
	local->cardnr = -1;

	local->p_dev = link;
	link->priv = local;

	/*
	General socket configuration defaults can go here. In this
	client, we assume very little, and rely on the CIS for almost
	everything. In most clients, many details (i.e., number, sizes,
	and attributes of IO windows) are fixed by the nature of the
	device, and can be hard-wired here.
	*/

	/* from old sedl_cs
	*/
	/* The io structure describes IO port mapping */
	link->resource[0]->end = 8;
	link->resource[0]->flags \|= IO_DATA_PATH_WIDTH_8;

	link->conf.Attributes = 0;
	link->conf.IntType = INT_MEMORY_AND_IO;

	return sedlbauer_config(link);
	} /* sedlbauer_attach */

	/*======================================================================

	This deletes a driver "instance". The device is de-registered
	with Card Services. If it has been released, all local data
	structures are freed. Otherwise, the structures will be freed
	when the device is released.

	======================================================================*/

	static void __devexit sedlbauer_detach(struct pcmcia_device *link)
	{
	dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);

	((local_info_t *)link->priv)->stop = 1;
	sedlbauer_release(link);

	/* This points to the parent local_info_t struct */
	kfree(link->priv);
	} /* sedlbauer_detach */

	/*======================================================================

	sedlbauer_config() is scheduled to run after a CARD_INSERTION event
	is received, to configure the PCMCIA socket, and to make the
	device available to the system.

	======================================================================*/
	static int sedlbauer_config_check(struct pcmcia_device *p_dev,
	cistpl_cftable_entry_t *cfg,
	cistpl_cftable_entry_t *dflt,
	unsigned int vcc,
	void *priv_data)
	{
	if (cfg->index == 0)
	return -ENODEV;

	/* Does this card need audio output? */
	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
	p_dev->conf.Attributes \|= CONF_ENABLE_SPKR;
	p_dev->conf.Status = CCSR_AUDIO_ENA;
	}

	/* Use power settings for Vcc and Vpp if present */
	/* Note that the CIS values need to be rescaled */
	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
	if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
	return -ENODEV;
	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
	if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
	return -ENODEV;
	}

	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
	p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
	p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;

	p_dev->conf.Attributes \|= CONF_ENABLE_IRQ;

	/* IO window settings */
	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
	if ((cfg->io.nwin > 0) \|\| (dflt->io.nwin > 0)) {
	cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
	p_dev->resource[0]->start = io->win[0].base;
	p_dev->resource[0]->end = io->win[0].len;
	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
	p_dev->resource[0]->flags \|=
	pcmcia_io_cfg_data_width(io->flags);
	if (io->nwin > 1) {
	p_dev->resource[1]->flags = p_dev->resource[0]->flags;
	p_dev->resource[1]->start = io->win[1].base;
	p_dev->resource[1]->end = io->win[1].len;
	}
	/* This reserves IO space but doesn't actually enable it */
	p_dev->io_lines = 3;
	if (pcmcia_request_io(p_dev) != 0)
	return -ENODEV;
	}

	return 0;
	}



	static int __devinit sedlbauer_config(struct pcmcia_device *link)
	{
	int ret;
	IsdnCard_t icard;

	dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);

	/*
	In this loop, we scan the CIS for configuration table entries,
	each of which describes a valid card configuration, including
	voltage, IO window, memory window, and interrupt settings.

	We make no assumptions about the card to be configured: we use
	just the information available in the CIS. In an ideal world,
	this would work for any PCMCIA card, but it requires a complete
	and accurate CIS. In practice, a driver usually "knows" most of
	these things without consulting the CIS, and most client drivers
	will only use the CIS to fill in implementation-defined details.
	*/
	ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
	if (ret)
	goto failed;

	/*
	This actually configures the PCMCIA socket -- setting up
	the I/O windows and the interrupt mapping, and putting the
	card and host interface into "Memory and IO" mode.
	*/
	ret = pcmcia_request_configuration(link, &link->conf);
	if (ret)
	goto failed;

	/* Finally, report what we've done */
	dev_info(&link->dev, "index 0x%02x:",
	link->conf.ConfigIndex);
	if (link->conf.Vpp)
	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
	if (link->conf.Attributes & CONF_ENABLE_IRQ)
	printk(", irq %d", link->irq);
	if (link->resource[0])
	printk(" & %pR", link->resource[0]);
	if (link->resource[1])
	printk(" & %pR", link->resource[1]);
	printk("\n");

	icard.para[0] = link->irq;
	icard.para[1] = link->resource[0]->start;
	icard.protocol = protocol;
	icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;

	ret = hisax_init_pcmcia(link,
	&(((local_info_t *)link->priv)->stop), &icard);
	if (ret < 0) {
	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n",
	ret, link->resource[0]);
	sedlbauer_release(link);
	return -ENODEV;
	} else
	((local_info_t *)link->priv)->cardnr = ret;

	return 0;

	failed:
	sedlbauer_release(link);
	return -ENODEV;

	} /* sedlbauer_config */

	/*======================================================================

	After a card is removed, sedlbauer_release() will unregister the
	device, and release the PCMCIA configuration. If the device is
	still open, this will be postponed until it is closed.

	======================================================================*/

	static void sedlbauer_release(struct pcmcia_device *link)
	{
	local_info_t *local = link->priv;
	dev_dbg(&link->dev, "sedlbauer_release(0x%p)\n", link);

	if (local) {
	if (local->cardnr >= 0) {
	/* no unregister function with hisax */
	HiSax_closecard(local->cardnr);
	}
	}

	pcmcia_disable_device(link);
	} /* sedlbauer_release */

	static int sedlbauer_suspend(struct pcmcia_device *link)
	{
	local_info_t *dev = link->priv;

	dev->stop = 1;

	return 0;
	}

	static int sedlbauer_resume(struct pcmcia_device *link)
	{
	local_info_t *dev = link->priv;

	dev->stop = 0;

	return 0;
	}


	static struct pcmcia_device_id sedlbauer_ids[] = {
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "speed star II", "V 3.1", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D67", 0x81fb79f5, 0xe4e9bc12, 0x397b7e90),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D98", 0x81fb79f5, 0xe4e9bc12, 0x2e5c7fce),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (C) 93-94 VK", 0x81fb79f5, 0xe4e9bc12, 0x8db143fe),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (c) 93-95 VK", 0x81fb79f5, 0xe4e9bc12, 0xb391ab4c),
	PCMCIA_DEVICE_PROD_ID12("HST High Soft Tech GmbH", "Saphir II B", 0xd79e0b84, 0x21d083ae),
	/* PCMCIA_DEVICE_PROD_ID1234("SEDLBAUER", 0x81fb79f5), / / too generic*/
	PCMCIA_DEVICE_NULL
	};
	MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);

	static struct pcmcia_driver sedlbauer_driver = {
	.owner = THIS_MODULE,
	.drv = {
	.name = "sedlbauer_cs",
	},
	.probe = sedlbauer_probe,
	.remove = __devexit_p(sedlbauer_detach),
	.id_table = sedlbauer_ids,
	.suspend = sedlbauer_suspend,
	.resume = sedlbauer_resume,
	};

	static int __init init_sedlbauer_cs(void)
	{
	return pcmcia_register_driver(&sedlbauer_driver);
	}

	static void __exit exit_sedlbauer_cs(void)
	{
	pcmcia_unregister_driver(&sedlbauer_driver);
	}

	module_init(init_sedlbauer_cs);
	module_exit(exit_sedlbauer_cs);