|  | /*====================================================================== | 
|  | fmvj18x_cs.c 2.8 2002/03/23 | 
|  |  | 
|  | A fmvj18x (and its compatibles) PCMCIA client driver | 
|  |  | 
|  | Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp | 
|  |  | 
|  | TDK LAK-CD021 and CONTEC C-NET(PC)C support added by | 
|  | Nobuhiro Katayama, kata-n@po.iijnet.or.jp | 
|  |  | 
|  | The PCMCIA client code is based on code written by David Hinds. | 
|  | Network code is based on the "FMV-18x driver" by Yutaka TAMIYA | 
|  | but is actually largely Donald Becker's AT1700 driver, which | 
|  | carries the following attribution: | 
|  |  | 
|  | Written 1993-94 by Donald Becker. | 
|  |  | 
|  | Copyright 1993 United States Government as represented by the | 
|  | Director, National Security Agency. | 
|  |  | 
|  | This software may be used and distributed according to the terms | 
|  | of the GNU General Public License, incorporated herein by reference. | 
|  |  | 
|  | The author may be reached as becker@scyld.com, or C/O | 
|  | Scyld Computing Corporation | 
|  | 410 Severn Ave., Suite 210 | 
|  | Annapolis MD 21403 | 
|  |  | 
|  | ======================================================================*/ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #define DRV_NAME	"fmvj18x_cs" | 
|  | #define DRV_VERSION	"2.9" | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/crc32.h> | 
|  |  | 
|  | #include <pcmcia/cistpl.h> | 
|  | #include <pcmcia/ciscode.h> | 
|  | #include <pcmcia/ds.h> | 
|  |  | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/io.h> | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | /* Module parameters */ | 
|  |  | 
|  | MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) | 
|  |  | 
|  | /* SRAM configuration */ | 
|  | /* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */ | 
|  | INT_MODULE_PARM(sram_config, 0); | 
|  |  | 
|  |  | 
|  | /*====================================================================*/ | 
|  | /* | 
|  | PCMCIA event handlers | 
|  | */ | 
|  | static int fmvj18x_config(struct pcmcia_device *link); | 
|  | static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id); | 
|  | static int fmvj18x_setup_mfc(struct pcmcia_device *link); | 
|  | static void fmvj18x_release(struct pcmcia_device *link); | 
|  | static void fmvj18x_detach(struct pcmcia_device *p_dev); | 
|  |  | 
|  | /* | 
|  | LAN controller(MBH86960A) specific routines | 
|  | */ | 
|  | static int fjn_config(struct net_device *dev, struct ifmap *map); | 
|  | static int fjn_open(struct net_device *dev); | 
|  | static int fjn_close(struct net_device *dev); | 
|  | static netdev_tx_t fjn_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev); | 
|  | static irqreturn_t fjn_interrupt(int irq, void *dev_id); | 
|  | static void fjn_rx(struct net_device *dev); | 
|  | static void fjn_reset(struct net_device *dev); | 
|  | static void set_rx_mode(struct net_device *dev); | 
|  | static void fjn_tx_timeout(struct net_device *dev); | 
|  | static const struct ethtool_ops netdev_ethtool_ops; | 
|  |  | 
|  | /* | 
|  | card type | 
|  | */ | 
|  | typedef enum { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN, | 
|  | XXX10304, NEC, KME | 
|  | } cardtype_t; | 
|  |  | 
|  | /* | 
|  | driver specific data structure | 
|  | */ | 
|  | typedef struct local_info_t { | 
|  | struct pcmcia_device	*p_dev; | 
|  | long open_time; | 
|  | uint tx_started:1; | 
|  | uint tx_queue; | 
|  | u_short tx_queue_len; | 
|  | cardtype_t cardtype; | 
|  | u_short sent; | 
|  | u_char __iomem *base; | 
|  | } local_info_t; | 
|  |  | 
|  | #define MC_FILTERBREAK 64 | 
|  |  | 
|  | /*====================================================================*/ | 
|  | /* | 
|  | ioport offset from the base address | 
|  | */ | 
|  | #define TX_STATUS               0 /* transmit status register */ | 
|  | #define RX_STATUS               1 /* receive status register */ | 
|  | #define TX_INTR                 2 /* transmit interrupt mask register */ | 
|  | #define RX_INTR                 3 /* receive interrupt mask register */ | 
|  | #define TX_MODE                 4 /* transmit mode register */ | 
|  | #define RX_MODE                 5 /* receive mode register */ | 
|  | #define CONFIG_0                6 /* configuration register 0 */ | 
|  | #define CONFIG_1                7 /* configuration register 1 */ | 
|  |  | 
|  | #define NODE_ID                 8 /* node ID register            (bank 0) */ | 
|  | #define MAR_ADR                 8 /* multicast address registers (bank 1) */ | 
|  |  | 
|  | #define DATAPORT                8 /* buffer mem port registers   (bank 2) */ | 
|  | #define TX_START               10 /* transmit start register */ | 
|  | #define COL_CTRL               11 /* 16 collision control register */ | 
|  | #define BMPR12                 12 /* reserved */ | 
|  | #define BMPR13                 13 /* reserved */ | 
|  | #define RX_SKIP                14 /* skip received packet register */ | 
|  |  | 
|  | #define LAN_CTRL               16 /* LAN card control register */ | 
|  |  | 
|  | #define MAC_ID               0x1a /* hardware address */ | 
|  | #define UNGERMANN_MAC_ID     0x18 /* UNGERMANN-BASS hardware address */ | 
|  |  | 
|  | /* | 
|  | control bits | 
|  | */ | 
|  | #define ENA_TMT_OK           0x80 | 
|  | #define ENA_TMT_REC          0x20 | 
|  | #define ENA_COL              0x04 | 
|  | #define ENA_16_COL           0x02 | 
|  | #define ENA_TBUS_ERR         0x01 | 
|  |  | 
|  | #define ENA_PKT_RDY          0x80 | 
|  | #define ENA_BUS_ERR          0x40 | 
|  | #define ENA_LEN_ERR          0x08 | 
|  | #define ENA_ALG_ERR          0x04 | 
|  | #define ENA_CRC_ERR          0x02 | 
|  | #define ENA_OVR_FLO          0x01 | 
|  |  | 
|  | /* flags */ | 
|  | #define F_TMT_RDY            0x80 /* can accept new packet */ | 
|  | #define F_NET_BSY            0x40 /* carrier is detected */ | 
|  | #define F_TMT_OK             0x20 /* send packet successfully */ | 
|  | #define F_SRT_PKT            0x10 /* short packet error */ | 
|  | #define F_COL_ERR            0x04 /* collision error */ | 
|  | #define F_16_COL             0x02 /* 16 collision error */ | 
|  | #define F_TBUS_ERR           0x01 /* bus read error */ | 
|  |  | 
|  | #define F_PKT_RDY            0x80 /* packet(s) in buffer */ | 
|  | #define F_BUS_ERR            0x40 /* bus read error */ | 
|  | #define F_LEN_ERR            0x08 /* short packet */ | 
|  | #define F_ALG_ERR            0x04 /* frame error */ | 
|  | #define F_CRC_ERR            0x02 /* CRC error */ | 
|  | #define F_OVR_FLO            0x01 /* overflow error */ | 
|  |  | 
|  | #define F_BUF_EMP            0x40 /* receive buffer is empty */ | 
|  |  | 
|  | #define F_SKP_PKT            0x05 /* drop packet in buffer */ | 
|  |  | 
|  | /* default bitmaps */ | 
|  | #define D_TX_INTR  ( ENA_TMT_OK ) | 
|  | #define D_RX_INTR  ( ENA_PKT_RDY | ENA_LEN_ERR \ | 
|  | | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO ) | 
|  | #define TX_STAT_M  ( F_TMT_RDY ) | 
|  | #define RX_STAT_M  ( F_PKT_RDY | F_LEN_ERR \ | 
|  | | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO ) | 
|  |  | 
|  | /* commands */ | 
|  | #define D_TX_MODE            0x06 /* no tests, detect carrier */ | 
|  | #define ID_MATCHED           0x02 /* (RX_MODE) */ | 
|  | #define RECV_ALL             0x03 /* (RX_MODE) */ | 
|  | #define CONFIG0_DFL          0x5a /* 16bit bus, 4K x 2 Tx queues */ | 
|  | #define CONFIG0_DFL_1        0x5e /* 16bit bus, 8K x 2 Tx queues */ | 
|  | #define CONFIG0_RST          0xda /* Data Link Controller off (CONFIG_0) */ | 
|  | #define CONFIG0_RST_1        0xde /* Data Link Controller off (CONFIG_0) */ | 
|  | #define BANK_0               0xa0 /* bank 0 (CONFIG_1) */ | 
|  | #define BANK_1               0xa4 /* bank 1 (CONFIG_1) */ | 
|  | #define BANK_2               0xa8 /* bank 2 (CONFIG_1) */ | 
|  | #define CHIP_OFF             0x80 /* contrl chip power off (CONFIG_1) */ | 
|  | #define DO_TX                0x80 /* do transmit packet */ | 
|  | #define SEND_PKT             0x81 /* send a packet */ | 
|  | #define AUTO_MODE            0x07 /* Auto skip packet on 16 col detected */ | 
|  | #define MANU_MODE            0x03 /* Stop and skip packet on 16 col */ | 
|  | #define TDK_AUTO_MODE        0x47 /* Auto skip packet on 16 col detected */ | 
|  | #define TDK_MANU_MODE        0x43 /* Stop and skip packet on 16 col */ | 
|  | #define INTR_OFF             0x0d /* LAN controller ignores interrupts */ | 
|  | #define INTR_ON              0x1d /* LAN controller will catch interrupts */ | 
|  |  | 
|  | #define TX_TIMEOUT		((400*HZ)/1000) | 
|  |  | 
|  | #define BANK_0U              0x20 /* bank 0 (CONFIG_1) */ | 
|  | #define BANK_1U              0x24 /* bank 1 (CONFIG_1) */ | 
|  | #define BANK_2U              0x28 /* bank 2 (CONFIG_1) */ | 
|  |  | 
|  | static const struct net_device_ops fjn_netdev_ops = { | 
|  | .ndo_open 		= fjn_open, | 
|  | .ndo_stop		= fjn_close, | 
|  | .ndo_start_xmit 	= fjn_start_xmit, | 
|  | .ndo_tx_timeout 	= fjn_tx_timeout, | 
|  | .ndo_set_config 	= fjn_config, | 
|  | .ndo_set_rx_mode	= set_rx_mode, | 
|  | .ndo_change_mtu		= eth_change_mtu, | 
|  | .ndo_set_mac_address 	= eth_mac_addr, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | }; | 
|  |  | 
|  | static int fmvj18x_probe(struct pcmcia_device *link) | 
|  | { | 
|  | local_info_t *lp; | 
|  | struct net_device *dev; | 
|  |  | 
|  | dev_dbg(&link->dev, "fmvj18x_attach()\n"); | 
|  |  | 
|  | /* Make up a FMVJ18x specific data structure */ | 
|  | dev = alloc_etherdev(sizeof(local_info_t)); | 
|  | if (!dev) | 
|  | return -ENOMEM; | 
|  | lp = netdev_priv(dev); | 
|  | link->priv = dev; | 
|  | lp->p_dev = link; | 
|  | lp->base = NULL; | 
|  |  | 
|  | /* The io structure describes IO port mapping */ | 
|  | link->resource[0]->end = 32; | 
|  | link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; | 
|  |  | 
|  | /* General socket configuration */ | 
|  | link->config_flags |= CONF_ENABLE_IRQ; | 
|  |  | 
|  | dev->netdev_ops = &fjn_netdev_ops; | 
|  | dev->watchdog_timeo = TX_TIMEOUT; | 
|  |  | 
|  | SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); | 
|  |  | 
|  | return fmvj18x_config(link); | 
|  | } /* fmvj18x_attach */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static void fmvj18x_detach(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  |  | 
|  | dev_dbg(&link->dev, "fmvj18x_detach\n"); | 
|  |  | 
|  | unregister_netdev(dev); | 
|  |  | 
|  | fmvj18x_release(link); | 
|  |  | 
|  | free_netdev(dev); | 
|  | } /* fmvj18x_detach */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static int mfc_try_io_port(struct pcmcia_device *link) | 
|  | { | 
|  | int i, ret; | 
|  | static const unsigned int serial_base[5] = | 
|  | { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; | 
|  |  | 
|  | for (i = 0; i < 5; i++) { | 
|  | link->resource[1]->start = serial_base[i]; | 
|  | link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; | 
|  | if (link->resource[1]->start == 0) { | 
|  | link->resource[1]->end = 0; | 
|  | pr_notice("out of resource for serial\n"); | 
|  | } | 
|  | ret = pcmcia_request_io(link); | 
|  | if (ret == 0) | 
|  | return ret; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ungermann_try_io_port(struct pcmcia_device *link) | 
|  | { | 
|  | int ret; | 
|  | unsigned int ioaddr; | 
|  | /* | 
|  | Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360 | 
|  | 0x380,0x3c0 only for ioport. | 
|  | */ | 
|  | for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { | 
|  | link->resource[0]->start = ioaddr; | 
|  | ret = pcmcia_request_io(link); | 
|  | if (ret == 0) { | 
|  | /* calculate ConfigIndex value */ | 
|  | link->config_index = | 
|  | ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | return ret;	/* RequestIO failed */ | 
|  | } | 
|  |  | 
|  | static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) | 
|  | { | 
|  | return 0; /* strange, but that's what the code did already before... */ | 
|  | } | 
|  |  | 
|  | static int fmvj18x_config(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  | local_info_t *lp = netdev_priv(dev); | 
|  | int i, ret; | 
|  | unsigned int ioaddr; | 
|  | cardtype_t cardtype; | 
|  | char *card_name = "unknown"; | 
|  | u8 *buf; | 
|  | size_t len; | 
|  | u_char buggybuf[32]; | 
|  |  | 
|  | dev_dbg(&link->dev, "fmvj18x_config\n"); | 
|  |  | 
|  | link->io_lines = 5; | 
|  |  | 
|  | len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); | 
|  | kfree(buf); | 
|  |  | 
|  | if (len) { | 
|  | /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */ | 
|  | ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL); | 
|  | if (ret != 0) | 
|  | goto failed; | 
|  |  | 
|  | switch (link->manf_id) { | 
|  | case MANFID_TDK: | 
|  | cardtype = TDK; | 
|  | if (link->card_id == PRODID_TDK_GN3410 || | 
|  | link->card_id == PRODID_TDK_NP9610 || | 
|  | link->card_id == PRODID_TDK_MN3200) { | 
|  | /* MultiFunction Card */ | 
|  | link->config_base = 0x800; | 
|  | link->config_index = 0x47; | 
|  | link->resource[1]->end = 8; | 
|  | } | 
|  | break; | 
|  | case MANFID_NEC: | 
|  | cardtype = NEC; /* MultiFunction Card */ | 
|  | link->config_base = 0x800; | 
|  | link->config_index = 0x47; | 
|  | link->resource[1]->end = 8; | 
|  | break; | 
|  | case MANFID_KME: | 
|  | cardtype = KME; /* MultiFunction Card */ | 
|  | link->config_base = 0x800; | 
|  | link->config_index = 0x47; | 
|  | link->resource[1]->end = 8; | 
|  | break; | 
|  | case MANFID_CONTEC: | 
|  | cardtype = CONTEC; | 
|  | break; | 
|  | case MANFID_FUJITSU: | 
|  | if (link->config_base == 0x0fe0) | 
|  | cardtype = MBH10302; | 
|  | else if (link->card_id == PRODID_FUJITSU_MBH10302) | 
|  | /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), | 
|  | but these are MBH10304 based card. */ | 
|  | cardtype = MBH10304; | 
|  | else if (link->card_id == PRODID_FUJITSU_MBH10304) | 
|  | cardtype = MBH10304; | 
|  | else | 
|  | cardtype = LA501; | 
|  | break; | 
|  | default: | 
|  | cardtype = MBH10304; | 
|  | } | 
|  | } else { | 
|  | /* old type card */ | 
|  | switch (link->manf_id) { | 
|  | case MANFID_FUJITSU: | 
|  | if (link->card_id == PRODID_FUJITSU_MBH10304) { | 
|  | cardtype = XXX10304;    /* MBH10304 with buggy CIS */ | 
|  | link->config_index = 0x20; | 
|  | } else { | 
|  | cardtype = MBH10302;    /* NextCom NC5310, etc. */ | 
|  | link->config_index = 1; | 
|  | } | 
|  | break; | 
|  | case MANFID_UNGERMANN: | 
|  | cardtype = UNGERMANN; | 
|  | break; | 
|  | default: | 
|  | cardtype = MBH10302; | 
|  | link->config_index = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (link->resource[1]->end != 0) { | 
|  | ret = mfc_try_io_port(link); | 
|  | if (ret != 0) goto failed; | 
|  | } else if (cardtype == UNGERMANN) { | 
|  | ret = ungermann_try_io_port(link); | 
|  | if (ret != 0) goto failed; | 
|  | } else { | 
|  | ret = pcmcia_request_io(link); | 
|  | if (ret) | 
|  | goto failed; | 
|  | } | 
|  | ret = pcmcia_request_irq(link, fjn_interrupt); | 
|  | if (ret) | 
|  | goto failed; | 
|  | ret = pcmcia_enable_device(link); | 
|  | if (ret) | 
|  | goto failed; | 
|  |  | 
|  | dev->irq = link->irq; | 
|  | dev->base_addr = link->resource[0]->start; | 
|  |  | 
|  | if (resource_size(link->resource[1]) != 0) { | 
|  | ret = fmvj18x_setup_mfc(link); | 
|  | if (ret != 0) goto failed; | 
|  | } | 
|  |  | 
|  | ioaddr = dev->base_addr; | 
|  |  | 
|  | /* Reset controller */ | 
|  | if (sram_config == 0) | 
|  | outb(CONFIG0_RST, ioaddr + CONFIG_0); | 
|  | else | 
|  | outb(CONFIG0_RST_1, ioaddr + CONFIG_0); | 
|  |  | 
|  | /* Power On chip and select bank 0 */ | 
|  | if (cardtype == MBH10302) | 
|  | outb(BANK_0, ioaddr + CONFIG_1); | 
|  | else | 
|  | outb(BANK_0U, ioaddr + CONFIG_1); | 
|  |  | 
|  | /* Set hardware address */ | 
|  | switch (cardtype) { | 
|  | case MBH10304: | 
|  | case TDK: | 
|  | case LA501: | 
|  | case CONTEC: | 
|  | case NEC: | 
|  | case KME: | 
|  | if (cardtype == MBH10304) { | 
|  | card_name = "FMV-J182"; | 
|  |  | 
|  | len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); | 
|  | if (len < 11) { | 
|  | kfree(buf); | 
|  | goto failed; | 
|  | } | 
|  | /* Read MACID from CIS */ | 
|  | for (i = 5; i < 11; i++) | 
|  | dev->dev_addr[i] = buf[i]; | 
|  | kfree(buf); | 
|  | } else { | 
|  | if (pcmcia_get_mac_from_cis(link, dev)) | 
|  | goto failed; | 
|  | if( cardtype == TDK ) { | 
|  | card_name = "TDK LAK-CD021"; | 
|  | } else if( cardtype == LA501 ) { | 
|  | card_name = "LA501"; | 
|  | } else if( cardtype == NEC ) { | 
|  | card_name = "PK-UG-J001"; | 
|  | } else if( cardtype == KME ) { | 
|  | card_name = "Panasonic"; | 
|  | } else { | 
|  | card_name = "C-NET(PC)C"; | 
|  | } | 
|  | } | 
|  | break; | 
|  | case UNGERMANN: | 
|  | /* Read MACID from register */ | 
|  | for (i = 0; i < 6; i++) | 
|  | dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i); | 
|  | card_name = "Access/CARD"; | 
|  | break; | 
|  | case XXX10304: | 
|  | /* Read MACID from Buggy CIS */ | 
|  | if (fmvj18x_get_hwinfo(link, buggybuf) == -1) { | 
|  | pr_notice("unable to read hardware net address\n"); | 
|  | goto failed; | 
|  | } | 
|  | for (i = 0 ; i < 6; i++) { | 
|  | dev->dev_addr[i] = buggybuf[i]; | 
|  | } | 
|  | card_name = "FMV-J182"; | 
|  | break; | 
|  | case MBH10302: | 
|  | default: | 
|  | /* Read MACID from register */ | 
|  | for (i = 0; i < 6; i++) | 
|  | dev->dev_addr[i] = inb(ioaddr + MAC_ID + i); | 
|  | card_name = "FMV-J181"; | 
|  | break; | 
|  | } | 
|  |  | 
|  | lp->cardtype = cardtype; | 
|  | SET_NETDEV_DEV(dev, &link->dev); | 
|  |  | 
|  | if (register_netdev(dev) != 0) { | 
|  | pr_notice("register_netdev() failed\n"); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | /* print current configuration */ | 
|  | netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n", | 
|  | card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2", | 
|  | dev->base_addr, dev->irq, dev->dev_addr); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | failed: | 
|  | fmvj18x_release(link); | 
|  | return -ENODEV; | 
|  | } /* fmvj18x_config */ | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) | 
|  | { | 
|  | u_char __iomem *base; | 
|  | int i, j; | 
|  |  | 
|  | /* Allocate a small memory window */ | 
|  | link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; | 
|  | link->resource[2]->start = 0; link->resource[2]->end = 0; | 
|  | i = pcmcia_request_window(link, link->resource[2], 0); | 
|  | if (i != 0) | 
|  | return -1; | 
|  |  | 
|  | base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); | 
|  | pcmcia_map_mem_page(link, link->resource[2], 0); | 
|  |  | 
|  | /* | 
|  | *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format | 
|  | *  22 0d xx xx xx 04 06 yy yy yy yy yy yy ff | 
|  | *  'xx' is garbage. | 
|  | *  'yy' is MAC address. | 
|  | */ | 
|  | for (i = 0; i < 0x200; i++) { | 
|  | if (readb(base+i*2) == 0x22) { | 
|  | if (readb(base+(i-1)*2) == 0xff && | 
|  | readb(base+(i+5)*2) == 0x04 && | 
|  | readb(base+(i+6)*2) == 0x06 && | 
|  | readb(base+(i+13)*2) == 0xff) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (i != 0x200) { | 
|  | for (j = 0 ; j < 6; j++,i++) { | 
|  | node_id[j] = readb(base+(i+7)*2); | 
|  | } | 
|  | } | 
|  |  | 
|  | iounmap(base); | 
|  | j = pcmcia_release_window(link, link->resource[2]); | 
|  | return (i != 0x200) ? 0 : -1; | 
|  |  | 
|  | } /* fmvj18x_get_hwinfo */ | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static int fmvj18x_setup_mfc(struct pcmcia_device *link) | 
|  | { | 
|  | int i; | 
|  | struct net_device *dev = link->priv; | 
|  | unsigned int ioaddr; | 
|  | local_info_t *lp = netdev_priv(dev); | 
|  |  | 
|  | /* Allocate a small memory window */ | 
|  | link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; | 
|  | link->resource[3]->start = link->resource[3]->end = 0; | 
|  | i = pcmcia_request_window(link, link->resource[3], 0); | 
|  | if (i != 0) | 
|  | return -1; | 
|  |  | 
|  | lp->base = ioremap(link->resource[3]->start, | 
|  | resource_size(link->resource[3])); | 
|  | if (lp->base == NULL) { | 
|  | netdev_notice(dev, "ioremap failed\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | i = pcmcia_map_mem_page(link, link->resource[3], 0); | 
|  | if (i != 0) { | 
|  | iounmap(lp->base); | 
|  | lp->base = NULL; | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | ioaddr = dev->base_addr; | 
|  | writeb(0x47, lp->base+0x800);	/* Config Option Register of LAN */ | 
|  | writeb(0x0,  lp->base+0x802);	/* Config and Status Register */ | 
|  |  | 
|  | writeb(ioaddr & 0xff, lp->base+0x80a);	  /* I/O Base(Low) of LAN */ | 
|  | writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */ | 
|  |  | 
|  | writeb(0x45, lp->base+0x820);	/* Config Option Register of Modem */ | 
|  | writeb(0x8,  lp->base+0x822);	/* Config and Status Register */ | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | } | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static void fmvj18x_release(struct pcmcia_device *link) | 
|  | { | 
|  |  | 
|  | struct net_device *dev = link->priv; | 
|  | local_info_t *lp = netdev_priv(dev); | 
|  | u_char __iomem *tmp; | 
|  |  | 
|  | dev_dbg(&link->dev, "fmvj18x_release\n"); | 
|  |  | 
|  | if (lp->base != NULL) { | 
|  | tmp = lp->base; | 
|  | lp->base = NULL;    /* set NULL before iounmap */ | 
|  | iounmap(tmp); | 
|  | } | 
|  |  | 
|  | pcmcia_disable_device(link); | 
|  |  | 
|  | } | 
|  |  | 
|  | static int fmvj18x_suspend(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  |  | 
|  | if (link->open) | 
|  | netif_device_detach(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int fmvj18x_resume(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  |  | 
|  | if (link->open) { | 
|  | fjn_reset(dev); | 
|  | netif_device_attach(dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static const struct pcmcia_device_id fmvj18x_ids[] = { | 
|  | PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004), | 
|  | PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59), | 
|  | PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922), | 
|  | PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922), | 
|  | PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db), | 
|  | PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e), | 
|  | PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2), | 
|  | PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4), | 
|  | PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0       ", 0x8cef4d3a, 0x075fc7b6), | 
|  | PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0        ", 0x8cef4d3a, 0xbccf43e6), | 
|  | PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666), | 
|  | PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70), | 
|  | PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a), | 
|  | PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2), | 
|  | PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304  ES", 0x2599f454), | 
|  | PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da), | 
|  | PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080), | 
|  | PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), | 
|  | PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), | 
|  | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a), | 
|  | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a), | 
|  | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01), | 
|  | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05), | 
|  | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05), | 
|  | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101), | 
|  | PCMCIA_DEVICE_NULL, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); | 
|  |  | 
|  | static struct pcmcia_driver fmvj18x_cs_driver = { | 
|  | .owner		= THIS_MODULE, | 
|  | .name		= "fmvj18x_cs", | 
|  | .probe		= fmvj18x_probe, | 
|  | .remove		= fmvj18x_detach, | 
|  | .id_table       = fmvj18x_ids, | 
|  | .suspend	= fmvj18x_suspend, | 
|  | .resume		= fmvj18x_resume, | 
|  | }; | 
|  | module_pcmcia_driver(fmvj18x_cs_driver); | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static irqreturn_t fjn_interrupt(int dummy, void *dev_id) | 
|  | { | 
|  | struct net_device *dev = dev_id; | 
|  | local_info_t *lp = netdev_priv(dev); | 
|  | unsigned int ioaddr; | 
|  | unsigned short tx_stat, rx_stat; | 
|  |  | 
|  | ioaddr = dev->base_addr; | 
|  |  | 
|  | /* avoid multiple interrupts */ | 
|  | outw(0x0000, ioaddr + TX_INTR); | 
|  |  | 
|  | /* wait for a while */ | 
|  | udelay(1); | 
|  |  | 
|  | /* get status */ | 
|  | tx_stat = inb(ioaddr + TX_STATUS); | 
|  | rx_stat = inb(ioaddr + RX_STATUS); | 
|  |  | 
|  | /* clear status */ | 
|  | outb(tx_stat, ioaddr + TX_STATUS); | 
|  | outb(rx_stat, ioaddr + RX_STATUS); | 
|  |  | 
|  | pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat); | 
|  | pr_debug("               tx_status %02x.\n", tx_stat); | 
|  |  | 
|  | if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) { | 
|  | /* there is packet(s) in rx buffer */ | 
|  | fjn_rx(dev); | 
|  | } | 
|  | if (tx_stat & F_TMT_RDY) { | 
|  | dev->stats.tx_packets += lp->sent ; | 
|  | lp->sent = 0 ; | 
|  | if (lp->tx_queue) { | 
|  | outb(DO_TX | lp->tx_queue, ioaddr + TX_START); | 
|  | lp->sent = lp->tx_queue ; | 
|  | lp->tx_queue = 0; | 
|  | lp->tx_queue_len = 0; | 
|  | dev->trans_start = jiffies; | 
|  | } else { | 
|  | lp->tx_started = 0; | 
|  | } | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  | pr_debug("%s: exiting interrupt,\n", dev->name); | 
|  | pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat); | 
|  |  | 
|  | outb(D_TX_INTR, ioaddr + TX_INTR); | 
|  | outb(D_RX_INTR, ioaddr + RX_INTR); | 
|  |  | 
|  | if (lp->base != NULL) { | 
|  | /* Ack interrupt for multifunction card */ | 
|  | writeb(0x01, lp->base+0x802); | 
|  | writeb(0x09, lp->base+0x822); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  |  | 
|  | } /* fjn_interrupt */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static void fjn_tx_timeout(struct net_device *dev) | 
|  | { | 
|  | struct local_info_t *lp = netdev_priv(dev); | 
|  | unsigned int ioaddr = dev->base_addr; | 
|  |  | 
|  | netdev_notice(dev, "transmit timed out with status %04x, %s?\n", | 
|  | htons(inw(ioaddr + TX_STATUS)), | 
|  | inb(ioaddr + TX_STATUS) & F_TMT_RDY | 
|  | ? "IRQ conflict" : "network cable problem"); | 
|  | netdev_notice(dev, "timeout registers: %04x %04x %04x " | 
|  | "%04x %04x %04x %04x %04x.\n", | 
|  | htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)), | 
|  | htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)), | 
|  | htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)), | 
|  | htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14))); | 
|  | dev->stats.tx_errors++; | 
|  | /* ToDo: We should try to restart the adaptor... */ | 
|  | local_irq_disable(); | 
|  | fjn_reset(dev); | 
|  |  | 
|  | lp->tx_started = 0; | 
|  | lp->tx_queue = 0; | 
|  | lp->tx_queue_len = 0; | 
|  | lp->sent = 0; | 
|  | lp->open_time = jiffies; | 
|  | local_irq_enable(); | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  |  | 
|  | static netdev_tx_t fjn_start_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct local_info_t *lp = netdev_priv(dev); | 
|  | unsigned int ioaddr = dev->base_addr; | 
|  | short length = skb->len; | 
|  |  | 
|  | if (length < ETH_ZLEN) | 
|  | { | 
|  | if (skb_padto(skb, ETH_ZLEN)) | 
|  | return NETDEV_TX_OK; | 
|  | length = ETH_ZLEN; | 
|  | } | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | { | 
|  | unsigned char *buf = skb->data; | 
|  |  | 
|  | if (length > ETH_FRAME_LEN) { | 
|  | netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n", | 
|  | length); | 
|  | return NETDEV_TX_BUSY; | 
|  | } | 
|  |  | 
|  | netdev_dbg(dev, "Transmitting a packet of length %lu\n", | 
|  | (unsigned long)skb->len); | 
|  | dev->stats.tx_bytes += skb->len; | 
|  |  | 
|  | /* Disable both interrupts. */ | 
|  | outw(0x0000, ioaddr + TX_INTR); | 
|  |  | 
|  | /* wait for a while */ | 
|  | udelay(1); | 
|  |  | 
|  | outw(length, ioaddr + DATAPORT); | 
|  | outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); | 
|  |  | 
|  | lp->tx_queue++; | 
|  | lp->tx_queue_len += ((length+3) & ~1); | 
|  |  | 
|  | if (lp->tx_started == 0) { | 
|  | /* If the Tx is idle, always trigger a transmit. */ | 
|  | outb(DO_TX | lp->tx_queue, ioaddr + TX_START); | 
|  | lp->sent = lp->tx_queue ; | 
|  | lp->tx_queue = 0; | 
|  | lp->tx_queue_len = 0; | 
|  | lp->tx_started = 1; | 
|  | netif_start_queue(dev); | 
|  | } else { | 
|  | if( sram_config == 0 ) { | 
|  | if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) ) | 
|  | /* Yes, there is room for one more packet. */ | 
|  | netif_start_queue(dev); | 
|  | } else { | 
|  | if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && | 
|  | lp->tx_queue < 127 ) | 
|  | /* Yes, there is room for one more packet. */ | 
|  | netif_start_queue(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Re-enable interrupts */ | 
|  | outb(D_TX_INTR, ioaddr + TX_INTR); | 
|  | outb(D_RX_INTR, ioaddr + RX_INTR); | 
|  | } | 
|  | dev_kfree_skb (skb); | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } /* fjn_start_xmit */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static void fjn_reset(struct net_device *dev) | 
|  | { | 
|  | struct local_info_t *lp = netdev_priv(dev); | 
|  | unsigned int ioaddr = dev->base_addr; | 
|  | int i; | 
|  |  | 
|  | netdev_dbg(dev, "fjn_reset() called\n"); | 
|  |  | 
|  | /* Reset controller */ | 
|  | if( sram_config == 0 ) | 
|  | outb(CONFIG0_RST, ioaddr + CONFIG_0); | 
|  | else | 
|  | outb(CONFIG0_RST_1, ioaddr + CONFIG_0); | 
|  |  | 
|  | /* Power On chip and select bank 0 */ | 
|  | if (lp->cardtype == MBH10302) | 
|  | outb(BANK_0, ioaddr + CONFIG_1); | 
|  | else | 
|  | outb(BANK_0U, ioaddr + CONFIG_1); | 
|  |  | 
|  | /* Set Tx modes */ | 
|  | outb(D_TX_MODE, ioaddr + TX_MODE); | 
|  | /* set Rx modes */ | 
|  | outb(ID_MATCHED, ioaddr + RX_MODE); | 
|  |  | 
|  | /* Set hardware address */ | 
|  | for (i = 0; i < 6; i++) | 
|  | outb(dev->dev_addr[i], ioaddr + NODE_ID + i); | 
|  |  | 
|  | /* (re)initialize the multicast table */ | 
|  | set_rx_mode(dev); | 
|  |  | 
|  | /* Switch to bank 2 (runtime mode) */ | 
|  | if (lp->cardtype == MBH10302) | 
|  | outb(BANK_2, ioaddr + CONFIG_1); | 
|  | else | 
|  | outb(BANK_2U, ioaddr + CONFIG_1); | 
|  |  | 
|  | /* set 16col ctrl bits */ | 
|  | if( lp->cardtype == TDK || lp->cardtype == CONTEC) | 
|  | outb(TDK_AUTO_MODE, ioaddr + COL_CTRL); | 
|  | else | 
|  | outb(AUTO_MODE, ioaddr + COL_CTRL); | 
|  |  | 
|  | /* clear Reserved Regs */ | 
|  | outb(0x00, ioaddr + BMPR12); | 
|  | outb(0x00, ioaddr + BMPR13); | 
|  |  | 
|  | /* reset Skip packet reg. */ | 
|  | outb(0x01, ioaddr + RX_SKIP); | 
|  |  | 
|  | /* Enable Tx and Rx */ | 
|  | if( sram_config == 0 ) | 
|  | outb(CONFIG0_DFL, ioaddr + CONFIG_0); | 
|  | else | 
|  | outb(CONFIG0_DFL_1, ioaddr + CONFIG_0); | 
|  |  | 
|  | /* Init receive pointer ? */ | 
|  | inw(ioaddr + DATAPORT); | 
|  | inw(ioaddr + DATAPORT); | 
|  |  | 
|  | /* Clear all status */ | 
|  | outb(0xff, ioaddr + TX_STATUS); | 
|  | outb(0xff, ioaddr + RX_STATUS); | 
|  |  | 
|  | if (lp->cardtype == MBH10302) | 
|  | outb(INTR_OFF, ioaddr + LAN_CTRL); | 
|  |  | 
|  | /* Turn on Rx interrupts */ | 
|  | outb(D_TX_INTR, ioaddr + TX_INTR); | 
|  | outb(D_RX_INTR, ioaddr + RX_INTR); | 
|  |  | 
|  | /* Turn on interrupts from LAN card controller */ | 
|  | if (lp->cardtype == MBH10302) | 
|  | outb(INTR_ON, ioaddr + LAN_CTRL); | 
|  | } /* fjn_reset */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static void fjn_rx(struct net_device *dev) | 
|  | { | 
|  | unsigned int ioaddr = dev->base_addr; | 
|  | int boguscount = 10;	/* 5 -> 10: by agy 19940922 */ | 
|  |  | 
|  | pr_debug("%s: in rx_packet(), rx_status %02x.\n", | 
|  | dev->name, inb(ioaddr + RX_STATUS)); | 
|  |  | 
|  | while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) { | 
|  | u_short status = inw(ioaddr + DATAPORT); | 
|  |  | 
|  | netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n", | 
|  | inb(ioaddr + RX_MODE), status); | 
|  | #ifndef final_version | 
|  | if (status == 0) { | 
|  | outb(F_SKP_PKT, ioaddr + RX_SKIP); | 
|  | break; | 
|  | } | 
|  | #endif | 
|  | if ((status & 0xF0) != 0x20) {	/* There was an error. */ | 
|  | dev->stats.rx_errors++; | 
|  | if (status & F_LEN_ERR) dev->stats.rx_length_errors++; | 
|  | if (status & F_ALG_ERR) dev->stats.rx_frame_errors++; | 
|  | if (status & F_CRC_ERR) dev->stats.rx_crc_errors++; | 
|  | if (status & F_OVR_FLO) dev->stats.rx_over_errors++; | 
|  | } else { | 
|  | u_short pkt_len = inw(ioaddr + DATAPORT); | 
|  | /* Malloc up new buffer. */ | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (pkt_len > 1550) { | 
|  | netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n", | 
|  | pkt_len); | 
|  | outb(F_SKP_PKT, ioaddr + RX_SKIP); | 
|  | dev->stats.rx_errors++; | 
|  | break; | 
|  | } | 
|  | skb = netdev_alloc_skb(dev, pkt_len + 2); | 
|  | if (skb == NULL) { | 
|  | outb(F_SKP_PKT, ioaddr + RX_SKIP); | 
|  | dev->stats.rx_dropped++; | 
|  | break; | 
|  | } | 
|  |  | 
|  | skb_reserve(skb, 2); | 
|  | insw(ioaddr + DATAPORT, skb_put(skb, pkt_len), | 
|  | (pkt_len + 1) >> 1); | 
|  | skb->protocol = eth_type_trans(skb, dev); | 
|  |  | 
|  | { | 
|  | int i; | 
|  | pr_debug("%s: Rxed packet of length %d: ", | 
|  | dev->name, pkt_len); | 
|  | for (i = 0; i < 14; i++) | 
|  | pr_debug(" %02x", skb->data[i]); | 
|  | pr_debug(".\n"); | 
|  | } | 
|  |  | 
|  | netif_rx(skb); | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes += pkt_len; | 
|  | } | 
|  | if (--boguscount <= 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* If any worth-while packets have been received, dev_rint() | 
|  | has done a netif_wake_queue() for us and will work on them | 
|  | when we get to the bottom-half routine. */ | 
|  | /* | 
|  | if (lp->cardtype != TDK) { | 
|  | int i; | 
|  | for (i = 0; i < 20; i++) { | 
|  | if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP) | 
|  | break; | 
|  | (void)inw(ioaddr + DATAPORT);  /+ dummy status read +/ | 
|  | outb(F_SKP_PKT, ioaddr + RX_SKIP); | 
|  | } | 
|  |  | 
|  | if (i > 0) | 
|  | pr_debug("%s: Exint Rx packet with mode %02x after " | 
|  | "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i); | 
|  | } | 
|  | */ | 
|  | } /* fjn_rx */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static void netdev_get_drvinfo(struct net_device *dev, | 
|  | struct ethtool_drvinfo *info) | 
|  | { | 
|  | strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); | 
|  | strlcpy(info->version, DRV_VERSION, sizeof(info->version)); | 
|  | snprintf(info->bus_info, sizeof(info->bus_info), | 
|  | "PCMCIA 0x%lx", dev->base_addr); | 
|  | } | 
|  |  | 
|  | static const struct ethtool_ops netdev_ethtool_ops = { | 
|  | .get_drvinfo		= netdev_get_drvinfo, | 
|  | }; | 
|  |  | 
|  | static int fjn_config(struct net_device *dev, struct ifmap *map){ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int fjn_open(struct net_device *dev) | 
|  | { | 
|  | struct local_info_t *lp = netdev_priv(dev); | 
|  | struct pcmcia_device *link = lp->p_dev; | 
|  |  | 
|  | pr_debug("fjn_open('%s').\n", dev->name); | 
|  |  | 
|  | if (!pcmcia_dev_present(link)) | 
|  | return -ENODEV; | 
|  |  | 
|  | link->open++; | 
|  |  | 
|  | fjn_reset(dev); | 
|  |  | 
|  | lp->tx_started = 0; | 
|  | lp->tx_queue = 0; | 
|  | lp->tx_queue_len = 0; | 
|  | lp->open_time = jiffies; | 
|  | netif_start_queue(dev); | 
|  |  | 
|  | return 0; | 
|  | } /* fjn_open */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | static int fjn_close(struct net_device *dev) | 
|  | { | 
|  | struct local_info_t *lp = netdev_priv(dev); | 
|  | struct pcmcia_device *link = lp->p_dev; | 
|  | unsigned int ioaddr = dev->base_addr; | 
|  |  | 
|  | pr_debug("fjn_close('%s').\n", dev->name); | 
|  |  | 
|  | lp->open_time = 0; | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | /* Set configuration register 0 to disable Tx and Rx. */ | 
|  | if( sram_config == 0 ) | 
|  | outb(CONFIG0_RST ,ioaddr + CONFIG_0); | 
|  | else | 
|  | outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0); | 
|  |  | 
|  | /* Update the statistics -- ToDo. */ | 
|  |  | 
|  | /* Power-down the chip.  Green, green, green! */ | 
|  | outb(CHIP_OFF ,ioaddr + CONFIG_1); | 
|  |  | 
|  | /* Set the ethernet adaptor disable IRQ */ | 
|  | if (lp->cardtype == MBH10302) | 
|  | outb(INTR_OFF, ioaddr + LAN_CTRL); | 
|  |  | 
|  | link->open--; | 
|  |  | 
|  | return 0; | 
|  | } /* fjn_close */ | 
|  |  | 
|  | /*====================================================================*/ | 
|  |  | 
|  | /* | 
|  | Set the multicast/promiscuous mode for this adaptor. | 
|  | */ | 
|  |  | 
|  | static void set_rx_mode(struct net_device *dev) | 
|  | { | 
|  | unsigned int ioaddr = dev->base_addr; | 
|  | u_char mc_filter[8];		 /* Multicast hash filter */ | 
|  | u_long flags; | 
|  | int i; | 
|  |  | 
|  | int saved_bank; | 
|  | int saved_config_0 = inb(ioaddr + CONFIG_0); | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | /* Disable Tx and Rx */ | 
|  | if (sram_config == 0) | 
|  | outb(CONFIG0_RST, ioaddr + CONFIG_0); | 
|  | else | 
|  | outb(CONFIG0_RST_1, ioaddr + CONFIG_0); | 
|  |  | 
|  | if (dev->flags & IFF_PROMISC) { | 
|  | memset(mc_filter, 0xff, sizeof(mc_filter)); | 
|  | outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */ | 
|  | } else if (netdev_mc_count(dev) > MC_FILTERBREAK || | 
|  | (dev->flags & IFF_ALLMULTI)) { | 
|  | /* Too many to filter perfectly -- accept all multicasts. */ | 
|  | memset(mc_filter, 0xff, sizeof(mc_filter)); | 
|  | outb(2, ioaddr + RX_MODE);	/* Use normal mode. */ | 
|  | } else if (netdev_mc_empty(dev)) { | 
|  | memset(mc_filter, 0x00, sizeof(mc_filter)); | 
|  | outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */ | 
|  | } else { | 
|  | struct netdev_hw_addr *ha; | 
|  |  | 
|  | memset(mc_filter, 0, sizeof(mc_filter)); | 
|  | netdev_for_each_mc_addr(ha, dev) { | 
|  | unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26; | 
|  | mc_filter[bit >> 3] |= (1 << (bit & 7)); | 
|  | } | 
|  | outb(2, ioaddr + RX_MODE);	/* Use normal mode. */ | 
|  | } | 
|  |  | 
|  | /* Switch to bank 1 and set the multicast table. */ | 
|  | saved_bank = inb(ioaddr + CONFIG_1); | 
|  | outb(0xe4, ioaddr + CONFIG_1); | 
|  |  | 
|  | for (i = 0; i < 8; i++) | 
|  | outb(mc_filter[i], ioaddr + MAR_ADR + i); | 
|  | outb(saved_bank, ioaddr + CONFIG_1); | 
|  |  | 
|  | outb(saved_config_0, ioaddr + CONFIG_0); | 
|  |  | 
|  | local_irq_restore(flags); | 
|  | } |