| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * n810.c -- SoC audio for Nokia N810 |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * |
| * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/soc.h> |
| |
| #include <asm/mach-types.h> |
| #include <linux/gpio.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/asoc-ti-mcbsp.h> |
| |
| #include "omap-mcbsp.h" |
| |
| #define N810_HEADSET_AMP_GPIO 10 |
| #define N810_SPEAKER_AMP_GPIO 101 |
| |
| enum { |
| N810_JACK_DISABLED, |
| N810_JACK_HP, |
| N810_JACK_HS, |
| N810_JACK_MIC, |
| }; |
| |
| static struct clk *sys_clkout2; |
| static struct clk *sys_clkout2_src; |
| static struct clk *func96m_clk; |
| |
| static int n810_spk_func; |
| static int n810_jack_func; |
| static int n810_dmic_func; |
| |
| static void n810_ext_control(struct snd_soc_dapm_context *dapm) |
| { |
| int hp = 0, line1l = 0; |
| |
| switch (n810_jack_func) { |
| case N810_JACK_HS: |
| line1l = 1; |
| /* fall through */ |
| case N810_JACK_HP: |
| hp = 1; |
| break; |
| case N810_JACK_MIC: |
| line1l = 1; |
| break; |
| } |
| |
| snd_soc_dapm_mutex_lock(dapm); |
| |
| if (n810_spk_func) |
| snd_soc_dapm_enable_pin_unlocked(dapm, "Ext Spk"); |
| else |
| snd_soc_dapm_disable_pin_unlocked(dapm, "Ext Spk"); |
| |
| if (hp) |
| snd_soc_dapm_enable_pin_unlocked(dapm, "Headphone Jack"); |
| else |
| snd_soc_dapm_disable_pin_unlocked(dapm, "Headphone Jack"); |
| if (line1l) |
| snd_soc_dapm_enable_pin_unlocked(dapm, "HS Mic"); |
| else |
| snd_soc_dapm_disable_pin_unlocked(dapm, "HS Mic"); |
| |
| if (n810_dmic_func) |
| snd_soc_dapm_enable_pin_unlocked(dapm, "DMic"); |
| else |
| snd_soc_dapm_disable_pin_unlocked(dapm, "DMic"); |
| |
| snd_soc_dapm_sync_unlocked(dapm); |
| |
| snd_soc_dapm_mutex_unlock(dapm); |
| } |
| |
| static int n810_startup(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| |
| snd_pcm_hw_constraint_single(runtime, SNDRV_PCM_HW_PARAM_CHANNELS, 2); |
| |
| n810_ext_control(&rtd->card->dapm); |
| return clk_prepare_enable(sys_clkout2); |
| } |
| |
| static void n810_shutdown(struct snd_pcm_substream *substream) |
| { |
| clk_disable_unprepare(sys_clkout2); |
| } |
| |
| static int n810_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| int err; |
| |
| /* Set the codec system clock for DAC and ADC */ |
| err = snd_soc_dai_set_sysclk(codec_dai, 0, 12000000, |
| SND_SOC_CLOCK_IN); |
| |
| return err; |
| } |
| |
| static const struct snd_soc_ops n810_ops = { |
| .startup = n810_startup, |
| .hw_params = n810_hw_params, |
| .shutdown = n810_shutdown, |
| }; |
| |
| static int n810_get_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.enumerated.item[0] = n810_spk_func; |
| |
| return 0; |
| } |
| |
| static int n810_set_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); |
| |
| if (n810_spk_func == ucontrol->value.enumerated.item[0]) |
| return 0; |
| |
| n810_spk_func = ucontrol->value.enumerated.item[0]; |
| n810_ext_control(&card->dapm); |
| |
| return 1; |
| } |
| |
| static int n810_get_jack(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.enumerated.item[0] = n810_jack_func; |
| |
| return 0; |
| } |
| |
| static int n810_set_jack(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); |
| |
| if (n810_jack_func == ucontrol->value.enumerated.item[0]) |
| return 0; |
| |
| n810_jack_func = ucontrol->value.enumerated.item[0]; |
| n810_ext_control(&card->dapm); |
| |
| return 1; |
| } |
| |
| static int n810_get_input(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.enumerated.item[0] = n810_dmic_func; |
| |
| return 0; |
| } |
| |
| static int n810_set_input(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); |
| |
| if (n810_dmic_func == ucontrol->value.enumerated.item[0]) |
| return 0; |
| |
| n810_dmic_func = ucontrol->value.enumerated.item[0]; |
| n810_ext_control(&card->dapm); |
| |
| return 1; |
| } |
| |
| static int n810_spk_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| if (SND_SOC_DAPM_EVENT_ON(event)) |
| gpio_set_value(N810_SPEAKER_AMP_GPIO, 1); |
| else |
| gpio_set_value(N810_SPEAKER_AMP_GPIO, 0); |
| |
| return 0; |
| } |
| |
| static int n810_jack_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| if (SND_SOC_DAPM_EVENT_ON(event)) |
| gpio_set_value(N810_HEADSET_AMP_GPIO, 1); |
| else |
| gpio_set_value(N810_HEADSET_AMP_GPIO, 0); |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget aic33_dapm_widgets[] = { |
| SND_SOC_DAPM_SPK("Ext Spk", n810_spk_event), |
| SND_SOC_DAPM_HP("Headphone Jack", n810_jack_event), |
| SND_SOC_DAPM_MIC("DMic", NULL), |
| SND_SOC_DAPM_MIC("HS Mic", NULL), |
| }; |
| |
| static const struct snd_soc_dapm_route audio_map[] = { |
| {"Headphone Jack", NULL, "HPLOUT"}, |
| {"Headphone Jack", NULL, "HPROUT"}, |
| |
| {"Ext Spk", NULL, "LLOUT"}, |
| {"Ext Spk", NULL, "RLOUT"}, |
| |
| {"DMic Rate 64", NULL, "DMic"}, |
| {"DMic", NULL, "Mic Bias"}, |
| |
| /* |
| * Note that the mic bias is coming from Retu/Vilma and we don't have |
| * control over it atm. The analog HS mic is not working. <- TODO |
| */ |
| {"LINE1L", NULL, "HS Mic"}, |
| }; |
| |
| static const char *spk_function[] = {"Off", "On"}; |
| static const char *jack_function[] = {"Off", "Headphone", "Headset", "Mic"}; |
| static const char *input_function[] = {"ADC", "Digital Mic"}; |
| static const struct soc_enum n810_enum[] = { |
| SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(spk_function), spk_function), |
| SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(jack_function), jack_function), |
| SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(input_function), input_function), |
| }; |
| |
| static const struct snd_kcontrol_new aic33_n810_controls[] = { |
| SOC_ENUM_EXT("Speaker Function", n810_enum[0], |
| n810_get_spk, n810_set_spk), |
| SOC_ENUM_EXT("Jack Function", n810_enum[1], |
| n810_get_jack, n810_set_jack), |
| SOC_ENUM_EXT("Input Select", n810_enum[2], |
| n810_get_input, n810_set_input), |
| }; |
| |
| /* Digital audio interface glue - connects codec <--> CPU */ |
| SND_SOC_DAILINK_DEFS(aic33, |
| DAILINK_COMP_ARRAY(COMP_CPU("48076000.mcbsp")), |
| DAILINK_COMP_ARRAY(COMP_CODEC("tlv320aic3x-codec.1-0018", |
| "tlv320aic3x-hifi")), |
| DAILINK_COMP_ARRAY(COMP_PLATFORM("48076000.mcbsp"))); |
| |
| static struct snd_soc_dai_link n810_dai = { |
| .name = "TLV320AIC33", |
| .stream_name = "AIC33", |
| .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBM_CFM, |
| .ops = &n810_ops, |
| SND_SOC_DAILINK_REG(aic33), |
| }; |
| |
| /* Audio machine driver */ |
| static struct snd_soc_card snd_soc_n810 = { |
| .name = "N810", |
| .owner = THIS_MODULE, |
| .dai_link = &n810_dai, |
| .num_links = 1, |
| |
| .controls = aic33_n810_controls, |
| .num_controls = ARRAY_SIZE(aic33_n810_controls), |
| .dapm_widgets = aic33_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(aic33_dapm_widgets), |
| .dapm_routes = audio_map, |
| .num_dapm_routes = ARRAY_SIZE(audio_map), |
| .fully_routed = true, |
| }; |
| |
| static struct platform_device *n810_snd_device; |
| |
| static int __init n810_soc_init(void) |
| { |
| int err; |
| struct device *dev; |
| |
| if (!of_have_populated_dt() || |
| (!of_machine_is_compatible("nokia,n810") && |
| !of_machine_is_compatible("nokia,n810-wimax"))) |
| return -ENODEV; |
| |
| n810_snd_device = platform_device_alloc("soc-audio", -1); |
| if (!n810_snd_device) |
| return -ENOMEM; |
| |
| platform_set_drvdata(n810_snd_device, &snd_soc_n810); |
| err = platform_device_add(n810_snd_device); |
| if (err) |
| goto err1; |
| |
| dev = &n810_snd_device->dev; |
| |
| sys_clkout2_src = clk_get(dev, "sys_clkout2_src"); |
| if (IS_ERR(sys_clkout2_src)) { |
| dev_err(dev, "Could not get sys_clkout2_src clock\n"); |
| err = PTR_ERR(sys_clkout2_src); |
| goto err2; |
| } |
| sys_clkout2 = clk_get(dev, "sys_clkout2"); |
| if (IS_ERR(sys_clkout2)) { |
| dev_err(dev, "Could not get sys_clkout2\n"); |
| err = PTR_ERR(sys_clkout2); |
| goto err3; |
| } |
| /* |
| * Configure 12 MHz output on SYS_CLKOUT2. Therefore we must use |
| * 96 MHz as its parent in order to get 12 MHz |
| */ |
| func96m_clk = clk_get(dev, "func_96m_ck"); |
| if (IS_ERR(func96m_clk)) { |
| dev_err(dev, "Could not get func 96M clock\n"); |
| err = PTR_ERR(func96m_clk); |
| goto err4; |
| } |
| clk_set_parent(sys_clkout2_src, func96m_clk); |
| clk_set_rate(sys_clkout2, 12000000); |
| |
| if (WARN_ON((gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) || |
| (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0))) { |
| err = -EINVAL; |
| goto err4; |
| } |
| |
| gpio_direction_output(N810_HEADSET_AMP_GPIO, 0); |
| gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0); |
| |
| return 0; |
| err4: |
| clk_put(sys_clkout2); |
| err3: |
| clk_put(sys_clkout2_src); |
| err2: |
| platform_device_del(n810_snd_device); |
| err1: |
| platform_device_put(n810_snd_device); |
| |
| return err; |
| } |
| |
| static void __exit n810_soc_exit(void) |
| { |
| gpio_free(N810_SPEAKER_AMP_GPIO); |
| gpio_free(N810_HEADSET_AMP_GPIO); |
| clk_put(sys_clkout2_src); |
| clk_put(sys_clkout2); |
| clk_put(func96m_clk); |
| |
| platform_device_unregister(n810_snd_device); |
| } |
| |
| module_init(n810_soc_init); |
| module_exit(n810_soc_exit); |
| |
| MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>"); |
| MODULE_DESCRIPTION("ALSA SoC Nokia N810"); |
| MODULE_LICENSE("GPL"); |