| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * VHT handling |
| * |
| * Portions of this file |
| * Copyright(c) 2015 - 2016 Intel Deutschland GmbH |
| * Copyright (C) 2018 - 2022 Intel Corporation |
| */ |
| |
| #include <linux/ieee80211.h> |
| #include <linux/export.h> |
| #include <net/mac80211.h> |
| #include "ieee80211_i.h" |
| #include "rate.h" |
| |
| |
| static void __check_vhtcap_disable(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_sta_vht_cap *vht_cap, |
| u32 flag) |
| { |
| __le32 le_flag = cpu_to_le32(flag); |
| |
| if (sdata->u.mgd.vht_capa_mask.vht_cap_info & le_flag && |
| !(sdata->u.mgd.vht_capa.vht_cap_info & le_flag)) |
| vht_cap->cap &= ~flag; |
| } |
| |
| void ieee80211_apply_vhtcap_overrides(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_sta_vht_cap *vht_cap) |
| { |
| int i; |
| u16 rxmcs_mask, rxmcs_cap, rxmcs_n, txmcs_mask, txmcs_cap, txmcs_n; |
| |
| if (!vht_cap->vht_supported) |
| return; |
| |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) |
| return; |
| |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_RXLDPC); |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_SHORT_GI_80); |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_SHORT_GI_160); |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_TXSTBC); |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE); |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE); |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN); |
| __check_vhtcap_disable(sdata, vht_cap, |
| IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN); |
| |
| /* Allow user to decrease AMPDU length exponent */ |
| if (sdata->u.mgd.vht_capa_mask.vht_cap_info & |
| cpu_to_le32(IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK)) { |
| u32 cap, n; |
| |
| n = le32_to_cpu(sdata->u.mgd.vht_capa.vht_cap_info) & |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; |
| n >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; |
| cap = vht_cap->cap & IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; |
| cap >>= IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; |
| |
| if (n < cap) { |
| vht_cap->cap &= |
| ~IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK; |
| vht_cap->cap |= |
| n << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; |
| } |
| } |
| |
| /* Allow the user to decrease MCSes */ |
| rxmcs_mask = |
| le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.rx_mcs_map); |
| rxmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.rx_mcs_map); |
| rxmcs_n &= rxmcs_mask; |
| rxmcs_cap = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); |
| |
| txmcs_mask = |
| le16_to_cpu(sdata->u.mgd.vht_capa_mask.supp_mcs.tx_mcs_map); |
| txmcs_n = le16_to_cpu(sdata->u.mgd.vht_capa.supp_mcs.tx_mcs_map); |
| txmcs_n &= txmcs_mask; |
| txmcs_cap = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); |
| for (i = 0; i < 8; i++) { |
| u8 m, n, c; |
| |
| m = (rxmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| n = (rxmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| c = (rxmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| |
| if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) || |
| n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) { |
| rxmcs_cap &= ~(3 << 2*i); |
| rxmcs_cap |= (rxmcs_n & (3 << 2*i)); |
| } |
| |
| m = (txmcs_mask >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| n = (txmcs_n >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| c = (txmcs_cap >> 2*i) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| |
| if (m && ((c != IEEE80211_VHT_MCS_NOT_SUPPORTED && n < c) || |
| n == IEEE80211_VHT_MCS_NOT_SUPPORTED)) { |
| txmcs_cap &= ~(3 << 2*i); |
| txmcs_cap |= (txmcs_n & (3 << 2*i)); |
| } |
| } |
| vht_cap->vht_mcs.rx_mcs_map = cpu_to_le16(rxmcs_cap); |
| vht_cap->vht_mcs.tx_mcs_map = cpu_to_le16(txmcs_cap); |
| } |
| |
| void |
| ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| const struct ieee80211_vht_cap *vht_cap_ie, |
| struct link_sta_info *link_sta) |
| { |
| struct ieee80211_sta_vht_cap *vht_cap = &link_sta->pub->vht_cap; |
| struct ieee80211_sta_vht_cap own_cap; |
| u32 cap_info, i; |
| bool have_80mhz; |
| |
| memset(vht_cap, 0, sizeof(*vht_cap)); |
| |
| if (!link_sta->pub->ht_cap.ht_supported) |
| return; |
| |
| if (!vht_cap_ie || !sband->vht_cap.vht_supported) |
| return; |
| |
| /* Allow VHT if at least one channel on the sband supports 80 MHz */ |
| have_80mhz = false; |
| for (i = 0; i < sband->n_channels; i++) { |
| if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | |
| IEEE80211_CHAN_NO_80MHZ)) |
| continue; |
| |
| have_80mhz = true; |
| break; |
| } |
| |
| if (!have_80mhz) |
| return; |
| |
| /* |
| * A VHT STA must support 40 MHz, but if we verify that here |
| * then we break a few things - some APs (e.g. Netgear R6300v2 |
| * and others based on the BCM4360 chipset) will unset this |
| * capability bit when operating in 20 MHz. |
| */ |
| |
| vht_cap->vht_supported = true; |
| |
| own_cap = sband->vht_cap; |
| /* |
| * If user has specified capability overrides, take care |
| * of that if the station we're setting up is the AP that |
| * we advertised a restricted capability set to. Override |
| * our own capabilities and then use those below. |
| */ |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && |
| !test_sta_flag(link_sta->sta, WLAN_STA_TDLS_PEER)) |
| ieee80211_apply_vhtcap_overrides(sdata, &own_cap); |
| |
| /* take some capabilities as-is */ |
| cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info); |
| vht_cap->cap = cap_info; |
| vht_cap->cap &= IEEE80211_VHT_CAP_RXLDPC | |
| IEEE80211_VHT_CAP_VHT_TXOP_PS | |
| IEEE80211_VHT_CAP_HTC_VHT | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK | |
| IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB | |
| IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB | |
| IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN | |
| IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN; |
| |
| vht_cap->cap |= min_t(u32, cap_info & IEEE80211_VHT_CAP_MAX_MPDU_MASK, |
| own_cap.cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK); |
| |
| /* and some based on our own capabilities */ |
| switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: |
| vht_cap->cap |= cap_info & |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; |
| break; |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: |
| vht_cap->cap |= cap_info & |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| break; |
| default: |
| /* nothing */ |
| break; |
| } |
| |
| /* symmetric capabilities */ |
| vht_cap->cap |= cap_info & own_cap.cap & |
| (IEEE80211_VHT_CAP_SHORT_GI_80 | |
| IEEE80211_VHT_CAP_SHORT_GI_160); |
| |
| /* remaining ones */ |
| if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) |
| vht_cap->cap |= cap_info & |
| (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | |
| IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK); |
| |
| if (own_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) |
| vht_cap->cap |= cap_info & |
| (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | |
| IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK); |
| |
| if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) |
| vht_cap->cap |= cap_info & |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; |
| |
| if (own_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) |
| vht_cap->cap |= cap_info & |
| IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE; |
| |
| if (own_cap.cap & IEEE80211_VHT_CAP_TXSTBC) |
| vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_RXSTBC_MASK; |
| |
| if (own_cap.cap & IEEE80211_VHT_CAP_RXSTBC_MASK) |
| vht_cap->cap |= cap_info & IEEE80211_VHT_CAP_TXSTBC; |
| |
| /* Copy peer MCS info, the driver might need them. */ |
| memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, |
| sizeof(struct ieee80211_vht_mcs_info)); |
| |
| /* copy EXT_NSS_BW Support value or remove the capability */ |
| if (ieee80211_hw_check(&sdata->local->hw, SUPPORTS_VHT_EXT_NSS_BW)) |
| vht_cap->cap |= (cap_info & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK); |
| else |
| vht_cap->vht_mcs.tx_highest &= |
| ~cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE); |
| |
| /* but also restrict MCSes */ |
| for (i = 0; i < 8; i++) { |
| u16 own_rx, own_tx, peer_rx, peer_tx; |
| |
| own_rx = le16_to_cpu(own_cap.vht_mcs.rx_mcs_map); |
| own_rx = (own_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| |
| own_tx = le16_to_cpu(own_cap.vht_mcs.tx_mcs_map); |
| own_tx = (own_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| |
| peer_rx = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); |
| peer_rx = (peer_rx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| |
| peer_tx = le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); |
| peer_tx = (peer_tx >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| |
| if (peer_tx != IEEE80211_VHT_MCS_NOT_SUPPORTED) { |
| if (own_rx == IEEE80211_VHT_MCS_NOT_SUPPORTED) |
| peer_tx = IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| else if (own_rx < peer_tx) |
| peer_tx = own_rx; |
| } |
| |
| if (peer_rx != IEEE80211_VHT_MCS_NOT_SUPPORTED) { |
| if (own_tx == IEEE80211_VHT_MCS_NOT_SUPPORTED) |
| peer_rx = IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| else if (own_tx < peer_rx) |
| peer_rx = own_tx; |
| } |
| |
| vht_cap->vht_mcs.rx_mcs_map &= |
| ~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2); |
| vht_cap->vht_mcs.rx_mcs_map |= cpu_to_le16(peer_rx << i * 2); |
| |
| vht_cap->vht_mcs.tx_mcs_map &= |
| ~cpu_to_le16(IEEE80211_VHT_MCS_NOT_SUPPORTED << i * 2); |
| vht_cap->vht_mcs.tx_mcs_map |= cpu_to_le16(peer_tx << i * 2); |
| } |
| |
| /* |
| * This is a workaround for VHT-enabled STAs which break the spec |
| * and have the VHT-MCS Rx map filled in with value 3 for all eight |
| * spacial streams, an example is AR9462. |
| * |
| * As per spec, in section 22.1.1 Introduction to the VHT PHY |
| * A VHT STA shall support at least single spactial stream VHT-MCSs |
| * 0 to 7 (transmit and receive) in all supported channel widths. |
| */ |
| if (vht_cap->vht_mcs.rx_mcs_map == cpu_to_le16(0xFFFF)) { |
| vht_cap->vht_supported = false; |
| sdata_info(sdata, |
| "Ignoring VHT IE from %pM (link:%pM) due to invalid rx_mcs_map\n", |
| link_sta->sta->addr, link_sta->addr); |
| return; |
| } |
| |
| /* finally set up the bandwidth */ |
| switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: |
| case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; |
| break; |
| default: |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; |
| |
| if (!(vht_cap->vht_mcs.tx_highest & |
| cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE))) |
| break; |
| |
| /* |
| * If this is non-zero, then it does support 160 MHz after all, |
| * in one form or the other. We don't distinguish here (or even |
| * above) between 160 and 80+80 yet. |
| */ |
| if (cap_info & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) |
| link_sta->cur_max_bandwidth = |
| IEEE80211_STA_RX_BW_160; |
| } |
| |
| link_sta->pub->bandwidth = ieee80211_sta_cur_vht_bw(link_sta); |
| |
| /* |
| * FIXME - should the amsdu len be per link? store per link |
| * and maintain a minimum? |
| */ |
| switch (vht_cap->cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK) { |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454: |
| link_sta->sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_11454; |
| break; |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991: |
| link_sta->sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_7991; |
| break; |
| case IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895: |
| default: |
| link_sta->sta->sta.max_amsdu_len = IEEE80211_MAX_MPDU_LEN_VHT_3895; |
| break; |
| } |
| } |
| |
| /* FIXME: move this to some better location - parses HE/EHT now */ |
| enum ieee80211_sta_rx_bandwidth |
| ieee80211_sta_cap_rx_bw(struct link_sta_info *link_sta) |
| { |
| unsigned int link_id = link_sta->link_id; |
| struct ieee80211_sub_if_data *sdata = link_sta->sta->sdata; |
| struct ieee80211_sta_vht_cap *vht_cap = &link_sta->pub->vht_cap; |
| struct ieee80211_sta_he_cap *he_cap = &link_sta->pub->he_cap; |
| struct ieee80211_sta_eht_cap *eht_cap = &link_sta->pub->eht_cap; |
| u32 cap_width; |
| |
| if (he_cap->has_he) { |
| struct ieee80211_bss_conf *link_conf; |
| enum ieee80211_sta_rx_bandwidth ret; |
| u8 info; |
| |
| rcu_read_lock(); |
| link_conf = rcu_dereference(sdata->vif.link_conf[link_id]); |
| |
| if (eht_cap->has_eht && |
| link_conf->chandef.chan->band == NL80211_BAND_6GHZ) { |
| info = eht_cap->eht_cap_elem.phy_cap_info[0]; |
| |
| if (info & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ) { |
| ret = IEEE80211_STA_RX_BW_320; |
| goto out; |
| } |
| } |
| |
| info = he_cap->he_cap_elem.phy_cap_info[0]; |
| |
| if (link_conf->chandef.chan->band == NL80211_BAND_2GHZ) { |
| if (info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G) |
| ret = IEEE80211_STA_RX_BW_40; |
| else |
| ret = IEEE80211_STA_RX_BW_20; |
| goto out; |
| } |
| |
| if (info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G || |
| info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) |
| ret = IEEE80211_STA_RX_BW_160; |
| else if (info & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G) |
| ret = IEEE80211_STA_RX_BW_80; |
| else |
| ret = IEEE80211_STA_RX_BW_20; |
| out: |
| rcu_read_unlock(); |
| |
| return ret; |
| } |
| |
| if (!vht_cap->vht_supported) |
| return link_sta->pub->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? |
| IEEE80211_STA_RX_BW_40 : |
| IEEE80211_STA_RX_BW_20; |
| |
| cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| |
| if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || |
| cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) |
| return IEEE80211_STA_RX_BW_160; |
| |
| /* |
| * If this is non-zero, then it does support 160 MHz after all, |
| * in one form or the other. We don't distinguish here (or even |
| * above) between 160 and 80+80 yet. |
| */ |
| if (vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) |
| return IEEE80211_STA_RX_BW_160; |
| |
| return IEEE80211_STA_RX_BW_80; |
| } |
| |
| enum nl80211_chan_width |
| ieee80211_sta_cap_chan_bw(struct link_sta_info *link_sta) |
| { |
| struct ieee80211_sta_vht_cap *vht_cap = &link_sta->pub->vht_cap; |
| u32 cap_width; |
| |
| if (!vht_cap->vht_supported) { |
| if (!link_sta->pub->ht_cap.ht_supported) |
| return NL80211_CHAN_WIDTH_20_NOHT; |
| |
| return link_sta->pub->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? |
| NL80211_CHAN_WIDTH_40 : NL80211_CHAN_WIDTH_20; |
| } |
| |
| cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| |
| if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) |
| return NL80211_CHAN_WIDTH_160; |
| else if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) |
| return NL80211_CHAN_WIDTH_80P80; |
| |
| return NL80211_CHAN_WIDTH_80; |
| } |
| |
| enum nl80211_chan_width |
| ieee80211_sta_rx_bw_to_chan_width(struct link_sta_info *link_sta) |
| { |
| enum ieee80211_sta_rx_bandwidth cur_bw = |
| link_sta->pub->bandwidth; |
| struct ieee80211_sta_vht_cap *vht_cap = |
| &link_sta->pub->vht_cap; |
| u32 cap_width; |
| |
| switch (cur_bw) { |
| case IEEE80211_STA_RX_BW_20: |
| if (!link_sta->pub->ht_cap.ht_supported) |
| return NL80211_CHAN_WIDTH_20_NOHT; |
| else |
| return NL80211_CHAN_WIDTH_20; |
| case IEEE80211_STA_RX_BW_40: |
| return NL80211_CHAN_WIDTH_40; |
| case IEEE80211_STA_RX_BW_80: |
| return NL80211_CHAN_WIDTH_80; |
| case IEEE80211_STA_RX_BW_160: |
| cap_width = |
| vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| |
| if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) |
| return NL80211_CHAN_WIDTH_160; |
| |
| return NL80211_CHAN_WIDTH_80P80; |
| default: |
| return NL80211_CHAN_WIDTH_20; |
| } |
| } |
| |
| enum ieee80211_sta_rx_bandwidth |
| ieee80211_chan_width_to_rx_bw(enum nl80211_chan_width width) |
| { |
| switch (width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| case NL80211_CHAN_WIDTH_20: |
| return IEEE80211_STA_RX_BW_20; |
| case NL80211_CHAN_WIDTH_40: |
| return IEEE80211_STA_RX_BW_40; |
| case NL80211_CHAN_WIDTH_80: |
| return IEEE80211_STA_RX_BW_80; |
| case NL80211_CHAN_WIDTH_160: |
| case NL80211_CHAN_WIDTH_80P80: |
| return IEEE80211_STA_RX_BW_160; |
| case NL80211_CHAN_WIDTH_320: |
| return IEEE80211_STA_RX_BW_320; |
| default: |
| WARN_ON_ONCE(1); |
| return IEEE80211_STA_RX_BW_20; |
| } |
| } |
| |
| /* FIXME: rename/move - this deals with everything not just VHT */ |
| enum ieee80211_sta_rx_bandwidth |
| ieee80211_sta_cur_vht_bw(struct link_sta_info *link_sta) |
| { |
| struct sta_info *sta = link_sta->sta; |
| struct ieee80211_bss_conf *link_conf; |
| enum nl80211_chan_width bss_width; |
| enum ieee80211_sta_rx_bandwidth bw; |
| |
| rcu_read_lock(); |
| link_conf = rcu_dereference(sta->sdata->vif.link_conf[link_sta->link_id]); |
| if (WARN_ON(!link_conf)) |
| bss_width = NL80211_CHAN_WIDTH_20_NOHT; |
| else |
| bss_width = link_conf->chandef.width; |
| rcu_read_unlock(); |
| |
| bw = ieee80211_sta_cap_rx_bw(link_sta); |
| bw = min(bw, link_sta->cur_max_bandwidth); |
| |
| /* Don't consider AP's bandwidth for TDLS peers, section 11.23.1 of |
| * IEEE80211-2016 specification makes higher bandwidth operation |
| * possible on the TDLS link if the peers have wider bandwidth |
| * capability. |
| * |
| * However, in this case, and only if the TDLS peer is authorized, |
| * limit to the tdls_chandef so that the configuration here isn't |
| * wider than what's actually requested on the channel context. |
| */ |
| if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && |
| test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW) && |
| test_sta_flag(sta, WLAN_STA_AUTHORIZED) && |
| sta->tdls_chandef.chan) |
| bw = min(bw, ieee80211_chan_width_to_rx_bw(sta->tdls_chandef.width)); |
| else |
| bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width)); |
| |
| return bw; |
| } |
| |
| void ieee80211_sta_set_rx_nss(struct link_sta_info *link_sta) |
| { |
| u8 ht_rx_nss = 0, vht_rx_nss = 0, he_rx_nss = 0, eht_rx_nss = 0, rx_nss; |
| bool support_160; |
| |
| /* if we received a notification already don't overwrite it */ |
| if (link_sta->pub->rx_nss) |
| return; |
| |
| if (link_sta->pub->eht_cap.has_eht) { |
| int i; |
| const u8 *rx_nss_mcs = (void *)&link_sta->pub->eht_cap.eht_mcs_nss_supp; |
| |
| /* get the max nss for EHT over all possible bandwidths and mcs */ |
| for (i = 0; i < sizeof(struct ieee80211_eht_mcs_nss_supp); i++) |
| eht_rx_nss = max_t(u8, eht_rx_nss, |
| u8_get_bits(rx_nss_mcs[i], |
| IEEE80211_EHT_MCS_NSS_RX)); |
| } |
| |
| if (link_sta->pub->he_cap.has_he) { |
| int i; |
| u8 rx_mcs_80 = 0, rx_mcs_160 = 0; |
| const struct ieee80211_sta_he_cap *he_cap = &link_sta->pub->he_cap; |
| u16 mcs_160_map = |
| le16_to_cpu(he_cap->he_mcs_nss_supp.rx_mcs_160); |
| u16 mcs_80_map = le16_to_cpu(he_cap->he_mcs_nss_supp.rx_mcs_80); |
| |
| for (i = 7; i >= 0; i--) { |
| u8 mcs_160 = (mcs_160_map >> (2 * i)) & 3; |
| |
| if (mcs_160 != IEEE80211_HE_MCS_NOT_SUPPORTED) { |
| rx_mcs_160 = i + 1; |
| break; |
| } |
| } |
| for (i = 7; i >= 0; i--) { |
| u8 mcs_80 = (mcs_80_map >> (2 * i)) & 3; |
| |
| if (mcs_80 != IEEE80211_HE_MCS_NOT_SUPPORTED) { |
| rx_mcs_80 = i + 1; |
| break; |
| } |
| } |
| |
| support_160 = he_cap->he_cap_elem.phy_cap_info[0] & |
| IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G; |
| |
| if (support_160) |
| he_rx_nss = min(rx_mcs_80, rx_mcs_160); |
| else |
| he_rx_nss = rx_mcs_80; |
| } |
| |
| if (link_sta->pub->ht_cap.ht_supported) { |
| if (link_sta->pub->ht_cap.mcs.rx_mask[0]) |
| ht_rx_nss++; |
| if (link_sta->pub->ht_cap.mcs.rx_mask[1]) |
| ht_rx_nss++; |
| if (link_sta->pub->ht_cap.mcs.rx_mask[2]) |
| ht_rx_nss++; |
| if (link_sta->pub->ht_cap.mcs.rx_mask[3]) |
| ht_rx_nss++; |
| /* FIXME: consider rx_highest? */ |
| } |
| |
| if (link_sta->pub->vht_cap.vht_supported) { |
| int i; |
| u16 rx_mcs_map; |
| |
| rx_mcs_map = le16_to_cpu(link_sta->pub->vht_cap.vht_mcs.rx_mcs_map); |
| |
| for (i = 7; i >= 0; i--) { |
| u8 mcs = (rx_mcs_map >> (2 * i)) & 3; |
| |
| if (mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) { |
| vht_rx_nss = i + 1; |
| break; |
| } |
| } |
| /* FIXME: consider rx_highest? */ |
| } |
| |
| rx_nss = max(vht_rx_nss, ht_rx_nss); |
| rx_nss = max(he_rx_nss, rx_nss); |
| rx_nss = max(eht_rx_nss, rx_nss); |
| link_sta->pub->rx_nss = max_t(u8, 1, rx_nss); |
| } |
| |
| u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, |
| struct link_sta_info *link_sta, |
| u8 opmode, enum nl80211_band band) |
| { |
| enum ieee80211_sta_rx_bandwidth new_bw; |
| struct sta_opmode_info sta_opmode = {}; |
| u32 changed = 0; |
| u8 nss; |
| |
| /* ignore - no support for BF yet */ |
| if (opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF) |
| return 0; |
| |
| nss = opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; |
| nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; |
| nss += 1; |
| |
| if (link_sta->pub->rx_nss != nss) { |
| link_sta->pub->rx_nss = nss; |
| sta_opmode.rx_nss = nss; |
| changed |= IEEE80211_RC_NSS_CHANGED; |
| sta_opmode.changed |= STA_OPMODE_N_SS_CHANGED; |
| } |
| |
| switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: |
| /* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */ |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; |
| break; |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: |
| /* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */ |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40; |
| break; |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: |
| if (opmode & IEEE80211_OPMODE_NOTIF_BW_160_80P80) |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; |
| else |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; |
| break; |
| case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: |
| /* legacy only, no longer used by newer spec */ |
| link_sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; |
| break; |
| } |
| |
| new_bw = ieee80211_sta_cur_vht_bw(link_sta); |
| if (new_bw != link_sta->pub->bandwidth) { |
| link_sta->pub->bandwidth = new_bw; |
| sta_opmode.bw = ieee80211_sta_rx_bw_to_chan_width(link_sta); |
| changed |= IEEE80211_RC_BW_CHANGED; |
| sta_opmode.changed |= STA_OPMODE_MAX_BW_CHANGED; |
| } |
| |
| if (sta_opmode.changed) |
| cfg80211_sta_opmode_change_notify(sdata->dev, link_sta->addr, |
| &sta_opmode, GFP_KERNEL); |
| |
| return changed; |
| } |
| |
| void ieee80211_process_mu_groups(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_link_data *link, |
| struct ieee80211_mgmt *mgmt) |
| { |
| struct ieee80211_bss_conf *link_conf = link->conf; |
| |
| if (!link_conf->mu_mimo_owner) |
| return; |
| |
| if (!memcmp(mgmt->u.action.u.vht_group_notif.position, |
| link_conf->mu_group.position, WLAN_USER_POSITION_LEN) && |
| !memcmp(mgmt->u.action.u.vht_group_notif.membership, |
| link_conf->mu_group.membership, WLAN_MEMBERSHIP_LEN)) |
| return; |
| |
| memcpy(link_conf->mu_group.membership, |
| mgmt->u.action.u.vht_group_notif.membership, |
| WLAN_MEMBERSHIP_LEN); |
| memcpy(link_conf->mu_group.position, |
| mgmt->u.action.u.vht_group_notif.position, |
| WLAN_USER_POSITION_LEN); |
| |
| ieee80211_link_info_change_notify(sdata, link, |
| BSS_CHANGED_MU_GROUPS); |
| } |
| |
| void ieee80211_update_mu_groups(struct ieee80211_vif *vif, unsigned int link_id, |
| const u8 *membership, const u8 *position) |
| { |
| struct ieee80211_bss_conf *link_conf; |
| |
| rcu_read_lock(); |
| link_conf = rcu_dereference(vif->link_conf[link_id]); |
| |
| if (!WARN_ON_ONCE(!link_conf || !link_conf->mu_mimo_owner)) { |
| memcpy(link_conf->mu_group.membership, membership, |
| WLAN_MEMBERSHIP_LEN); |
| memcpy(link_conf->mu_group.position, position, |
| WLAN_USER_POSITION_LEN); |
| } |
| rcu_read_unlock(); |
| } |
| EXPORT_SYMBOL_GPL(ieee80211_update_mu_groups); |
| |
| void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, |
| struct link_sta_info *link_sta, |
| u8 opmode, enum nl80211_band band) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; |
| |
| u32 changed = __ieee80211_vht_handle_opmode(sdata, link_sta, |
| opmode, band); |
| |
| if (changed > 0) { |
| ieee80211_recalc_min_chandef(sdata, link_sta->link_id); |
| rate_control_rate_update(local, sband, link_sta->sta, |
| link_sta->link_id, changed); |
| } |
| } |
| |
| void ieee80211_get_vht_mask_from_cap(__le16 vht_cap, |
| u16 vht_mask[NL80211_VHT_NSS_MAX]) |
| { |
| int i; |
| u16 mask, cap = le16_to_cpu(vht_cap); |
| |
| for (i = 0; i < NL80211_VHT_NSS_MAX; i++) { |
| mask = (cap >> i * 2) & IEEE80211_VHT_MCS_NOT_SUPPORTED; |
| switch (mask) { |
| case IEEE80211_VHT_MCS_SUPPORT_0_7: |
| vht_mask[i] = 0x00FF; |
| break; |
| case IEEE80211_VHT_MCS_SUPPORT_0_8: |
| vht_mask[i] = 0x01FF; |
| break; |
| case IEEE80211_VHT_MCS_SUPPORT_0_9: |
| vht_mask[i] = 0x03FF; |
| break; |
| case IEEE80211_VHT_MCS_NOT_SUPPORTED: |
| default: |
| vht_mask[i] = 0; |
| break; |
| } |
| } |
| } |