arch/powerpc/boot/dts/p1023rds.dts - linux - Git at Google

 /*
  * P1023 RDS Device Tree Source
  *
  * Copyright 2010-2011 Freescale Semiconductor Inc.
  *
  * Author: Roy Zang <tie-fei.zang@freescale.com>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /include/ "fsl/p1023si-pre.dtsi"

 / {
 	model = "fsl,P1023";
 	compatible = "fsl,P1023RDS";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;

 	memory {
 		device_type = "memory";
 	};

 	soc: soc@ff600000 {
 		ranges = <0x0 0x0 0xff600000 0x200000>;

 		i2c@3000 {
 			rtc@68 {
 				compatible = "dallas,ds1374";
 				reg = <0x68>;
 			};
 		};

 		spi@7000 {
 			fsl_dataflash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at45db081d";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 				partition@u-boot {
 					/* 512KB for u-boot Bootloader Image */
 					label = "u-boot-spi";
 					reg = <0x00000000 0x00080000>;
 					read-only;
 				};
 				partition@dtb {
 					/* 512KB for DTB Image */
 					label = "dtb-spi";
 					reg = <0x00080000 0x00080000>;
 					read-only;
 				};
 			};
 		};

 		usb@22000 {
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
 	};

 	lbc: localbus@ff605000 {
 		reg = <0 0xff605000 0 0x1000>;

 		/* NOR Flash, BCSR */
 		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
 			  0x1 0x0 0x0 0xe0000000 0x00008000>;

 		nor@0,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x02000000>;
 			bank-width = <2>;
 			device-width = <1>;
 			partition@0 {
 				label = "ramdisk";
 				reg = <0x00000000 0x01c00000>;
 			};
 			partition@1c00000 {
 				label = "kernel";
 				reg = <0x01c00000 0x002e0000>;
 			};
 			partiton@1ee0000 {
 				label = "dtb";
 				reg = <0x01ee0000 0x00020000>;
 			};
 			partition@1f00000 {
 				label = "firmware";
 				reg = <0x01f00000 0x00080000>;
 				read-only;
 			};
 			partition@1f80000 {
 				label = "u-boot";
 				reg = <0x01f80000 0x00080000>;
 				read-only;
 			};
 		};

 		fpga@1,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,p1023rds-fpga";
 			reg = <1 0 0x8000>;
 			ranges = <0 1 0 0x8000>;

 			bcsr@20 {
 				compatible = "fsl,p1023rds-bcsr";
 				reg = <0x20 0x20>;
 			};
 		};
 	};

 	pci0: pcie@ff60a000 {
 		reg = <0 0xff60a000 0 0x1000>;
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
 		pcie@0 {
 			/* IRQ[0:3] are pulled up on board, set to active-low */
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 0 1 0 0
 				0000 0 0 2 &mpic 1 1 0 0
 				0000 0 0 3 &mpic 2 1 0 0
 				0000 0 0 4 &mpic 3 1 0 0
 				>;
 			ranges = <0x2000000 0x0 0xc0000000
 				  0x2000000 0x0 0xc0000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};

 	board_pci1: pci1: pcie@ff609000 {
 		reg = <0 0xff609000 0 0x1000>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 		pcie@0 {
 			/*
 			 * IRQ[4:6] only for PCIe, set to active-high,
 			 * IRQ[7] is pulled up on board, set to active-low
 			 */
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 4 2 0 0
 				0000 0 0 2 &mpic 5 2 0 0
 				0000 0 0 3 &mpic 6 2 0 0
 				0000 0 0 4 &mpic 7 1 0 0
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};

 	pci2: pcie@ff60b000 {
 		reg = <0 0xff60b000 0 0x1000>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 		pcie@0 {
 			/*
 			 * IRQ[8:10] are pulled up on board, set to active-low
 			 * IRQ[11] only for PCIe, set to active-high,
 			 */
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 8 1 0 0
 				0000 0 0 2 &mpic 9 1 0 0
 				0000 0 0 3 &mpic 10 1 0 0
 				0000 0 0 4 &mpic 11 2 0 0
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};
 };

 /include/ "fsl/p1023si-post.dtsi"
	/*
	* P1023 RDS Device Tree Source
	*
	* Copyright 2010-2011 Freescale Semiconductor Inc.
	*
	* Author: Roy Zang <tie-fei.zang@freescale.com>
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/include/ "fsl/p1023si-pre.dtsi"

	/ {
	model = "fsl,P1023";
	compatible = "fsl,P1023RDS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	memory {
	device_type = "memory";
	};

	soc: soc@ff600000 {
	ranges = <0x0 0x0 0xff600000 0x200000>;

	i2c@3000 {
	rtc@68 {
	compatible = "dallas,ds1374";
	reg = <0x68>;
	};
	};

	spi@7000 {
	fsl_dataflash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "atmel,at45db081d";
	reg = <0>;
	spi-max-frequency = <40000000>; /* input clock */
	partition@u-boot {
	/* 512KB for u-boot Bootloader Image */
	label = "u-boot-spi";
	reg = <0x00000000 0x00080000>;
	read-only;
	};
	partition@dtb {
	/* 512KB for DTB Image */
	label = "dtb-spi";
	reg = <0x00080000 0x00080000>;
	read-only;
	};
	};
	};

	usb@22000 {
	dr_mode = "host";
	phy_type = "ulpi";
	};
	};

	lbc: localbus@ff605000 {
	reg = <0 0xff605000 0 0x1000>;

	/* NOR Flash, BCSR */
	ranges = <0x0 0x0 0x0 0xee000000 0x02000000
	0x1 0x0 0x0 0xe0000000 0x00008000>;

	nor@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "cfi-flash";
	reg = <0x0 0x0 0x02000000>;
	bank-width = <2>;
	device-width = <1>;
	partition@0 {
	label = "ramdisk";
	reg = <0x00000000 0x01c00000>;
	};
	partition@1c00000 {
	label = "kernel";
	reg = <0x01c00000 0x002e0000>;
	};
	partiton@1ee0000 {
	label = "dtb";
	reg = <0x01ee0000 0x00020000>;
	};
	partition@1f00000 {
	label = "firmware";
	reg = <0x01f00000 0x00080000>;
	read-only;
	};
	partition@1f80000 {
	label = "u-boot";
	reg = <0x01f80000 0x00080000>;
	read-only;
	};
	};

	fpga@1,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,p1023rds-fpga";
	reg = <1 0 0x8000>;
	ranges = <0 1 0 0x8000>;

	bcsr@20 {
	compatible = "fsl,p1023rds-bcsr";
	reg = <0x20 0x20>;
	};
	};
	};

	pci0: pcie@ff60a000 {
	reg = <0 0xff60a000 0 0x1000>;
	ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
	pcie@0 {
	/* IRQ[0:3] are pulled up on board, set to active-low */
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 0 1 0 0
	0000 0 0 2 &mpic 1 1 0 0
	0000 0 0 3 &mpic 2 1 0 0
	0000 0 0 4 &mpic 3 1 0 0
	>;
	ranges = <0x2000000 0x0 0xc0000000
	0x2000000 0x0 0xc0000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};

	board_pci1: pci1: pcie@ff609000 {
	reg = <0 0xff609000 0 0x1000>;
	ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
	pcie@0 {
	/*
	* IRQ[4:6] only for PCIe, set to active-high,
	* IRQ[7] is pulled up on board, set to active-low
	*/
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 4 2 0 0
	0000 0 0 2 &mpic 5 2 0 0
	0000 0 0 3 &mpic 6 2 0 0
	0000 0 0 4 &mpic 7 1 0 0
	>;
	ranges = <0x2000000 0x0 0xa0000000
	0x2000000 0x0 0xa0000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};

	pci2: pcie@ff60b000 {
	reg = <0 0xff60b000 0 0x1000>;
	ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
	pcie@0 {
	/*
	* IRQ[8:10] are pulled up on board, set to active-low
	* IRQ[11] only for PCIe, set to active-high,
	*/
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 8 1 0 0
	0000 0 0 2 &mpic 9 1 0 0
	0000 0 0 3 &mpic 10 1 0 0
	0000 0 0 4 &mpic 11 2 0 0
	>;
	ranges = <0x2000000 0x0 0x80000000
	0x2000000 0x0 0x80000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};
	};

	/include/ "fsl/p1023si-post.dtsi"