| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * STMicroelectronics STUSB160x Type-C controller family driver |
| * |
| * Copyright (C) 2020, STMicroelectronics |
| * Author(s): Amelie Delaunay <amelie.delaunay@st.com> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/usb/role.h> |
| #include <linux/usb/typec.h> |
| |
| #define STUSB160X_ALERT_STATUS 0x0B /* RC */ |
| #define STUSB160X_ALERT_STATUS_MASK_CTRL 0x0C /* RW */ |
| #define STUSB160X_CC_CONNECTION_STATUS_TRANS 0x0D /* RC */ |
| #define STUSB160X_CC_CONNECTION_STATUS 0x0E /* RO */ |
| #define STUSB160X_MONITORING_STATUS_TRANS 0x0F /* RC */ |
| #define STUSB160X_MONITORING_STATUS 0x10 /* RO */ |
| #define STUSB160X_CC_OPERATION_STATUS 0x11 /* RO */ |
| #define STUSB160X_HW_FAULT_STATUS_TRANS 0x12 /* RC */ |
| #define STUSB160X_HW_FAULT_STATUS 0x13 /* RO */ |
| #define STUSB160X_CC_CAPABILITY_CTRL 0x18 /* RW */ |
| #define STUSB160X_CC_VCONN_SWITCH_CTRL 0x1E /* RW */ |
| #define STUSB160X_VCONN_MONITORING_CTRL 0x20 /* RW */ |
| #define STUSB160X_VBUS_MONITORING_RANGE_CTRL 0x22 /* RW */ |
| #define STUSB160X_RESET_CTRL 0x23 /* RW */ |
| #define STUSB160X_VBUS_DISCHARGE_TIME_CTRL 0x25 /* RW */ |
| #define STUSB160X_VBUS_DISCHARGE_STATUS 0x26 /* RO */ |
| #define STUSB160X_VBUS_ENABLE_STATUS 0x27 /* RO */ |
| #define STUSB160X_CC_POWER_MODE_CTRL 0x28 /* RW */ |
| #define STUSB160X_VBUS_MONITORING_CTRL 0x2E /* RW */ |
| #define STUSB1600_REG_MAX 0x2F /* RO - Reserved */ |
| |
| /* STUSB160X_ALERT_STATUS/STUSB160X_ALERT_STATUS_MASK_CTRL bitfields */ |
| #define STUSB160X_HW_FAULT BIT(4) |
| #define STUSB160X_MONITORING BIT(5) |
| #define STUSB160X_CC_CONNECTION BIT(6) |
| #define STUSB160X_ALL_ALERTS GENMASK(6, 4) |
| |
| /* STUSB160X_CC_CONNECTION_STATUS_TRANS bitfields */ |
| #define STUSB160X_CC_ATTACH_TRANS BIT(0) |
| |
| /* STUSB160X_CC_CONNECTION_STATUS bitfields */ |
| #define STUSB160X_CC_ATTACH BIT(0) |
| #define STUSB160X_CC_VCONN_SUPPLY BIT(1) |
| #define STUSB160X_CC_DATA_ROLE(s) (!!((s) & BIT(2))) |
| #define STUSB160X_CC_POWER_ROLE(s) (!!((s) & BIT(3))) |
| #define STUSB160X_CC_ATTACHED_MODE GENMASK(7, 5) |
| |
| /* STUSB160X_MONITORING_STATUS_TRANS bitfields */ |
| #define STUSB160X_VCONN_PRESENCE_TRANS BIT(0) |
| #define STUSB160X_VBUS_PRESENCE_TRANS BIT(1) |
| #define STUSB160X_VBUS_VSAFE0V_TRANS BIT(2) |
| #define STUSB160X_VBUS_VALID_TRANS BIT(3) |
| |
| /* STUSB160X_MONITORING_STATUS bitfields */ |
| #define STUSB160X_VCONN_PRESENCE BIT(0) |
| #define STUSB160X_VBUS_PRESENCE BIT(1) |
| #define STUSB160X_VBUS_VSAFE0V BIT(2) |
| #define STUSB160X_VBUS_VALID BIT(3) |
| |
| /* STUSB160X_CC_OPERATION_STATUS bitfields */ |
| #define STUSB160X_TYPEC_FSM_STATE GENMASK(4, 0) |
| #define STUSB160X_SINK_POWER_STATE GENMASK(6, 5) |
| #define STUSB160X_CC_ATTACHED BIT(7) |
| |
| /* STUSB160X_HW_FAULT_STATUS_TRANS bitfields */ |
| #define STUSB160X_VCONN_SW_OVP_FAULT_TRANS BIT(0) |
| #define STUSB160X_VCONN_SW_OCP_FAULT_TRANS BIT(1) |
| #define STUSB160X_VCONN_SW_RVP_FAULT_TRANS BIT(2) |
| #define STUSB160X_VPU_VALID_TRANS BIT(4) |
| #define STUSB160X_VPU_OVP_FAULT_TRANS BIT(5) |
| #define STUSB160X_THERMAL_FAULT BIT(7) |
| |
| /* STUSB160X_HW_FAULT_STATUS bitfields */ |
| #define STUSB160X_VCONN_SW_OVP_FAULT_CC2 BIT(0) |
| #define STUSB160X_VCONN_SW_OVP_FAULT_CC1 BIT(1) |
| #define STUSB160X_VCONN_SW_OCP_FAULT_CC2 BIT(2) |
| #define STUSB160X_VCONN_SW_OCP_FAULT_CC1 BIT(3) |
| #define STUSB160X_VCONN_SW_RVP_FAULT_CC2 BIT(4) |
| #define STUSB160X_VCONN_SW_RVP_FAULT_CC1 BIT(5) |
| #define STUSB160X_VPU_VALID BIT(6) |
| #define STUSB160X_VPU_OVP_FAULT BIT(7) |
| |
| /* STUSB160X_CC_CAPABILITY_CTRL bitfields */ |
| #define STUSB160X_CC_VCONN_SUPPLY_EN BIT(0) |
| #define STUSB160X_CC_VCONN_DISCHARGE_EN BIT(4) |
| #define STUSB160X_CC_CURRENT_ADVERTISED GENMASK(7, 6) |
| |
| /* STUSB160X_VCONN_SWITCH_CTRL bitfields */ |
| #define STUSB160X_CC_VCONN_SWITCH_ILIM GENMASK(3, 0) |
| |
| /* STUSB160X_VCONN_MONITORING_CTRL bitfields */ |
| #define STUSB160X_VCONN_UVLO_THRESHOLD BIT(6) |
| #define STUSB160X_VCONN_MONITORING_EN BIT(7) |
| |
| /* STUSB160X_VBUS_MONITORING_RANGE_CTRL bitfields */ |
| #define STUSB160X_SHIFT_LOW_VBUS_LIMIT GENMASK(3, 0) |
| #define STUSB160X_SHIFT_HIGH_VBUS_LIMIT GENMASK(7, 4) |
| |
| /* STUSB160X_RESET_CTRL bitfields */ |
| #define STUSB160X_SW_RESET_EN BIT(0) |
| |
| /* STUSB160X_VBUS_DISCHARGE_TIME_CTRL bitfields */ |
| #define STUSBXX02_VBUS_DISCHARGE_TIME_TO_PDO GENMASK(3, 0) |
| #define STUSB160X_VBUS_DISCHARGE_TIME_TO_0V GENMASK(7, 4) |
| |
| /* STUSB160X_VBUS_DISCHARGE_STATUS bitfields */ |
| #define STUSB160X_VBUS_DISCHARGE_EN BIT(7) |
| |
| /* STUSB160X_VBUS_ENABLE_STATUS bitfields */ |
| #define STUSB160X_VBUS_SOURCE_EN BIT(0) |
| #define STUSB160X_VBUS_SINK_EN BIT(1) |
| |
| /* STUSB160X_CC_POWER_MODE_CTRL bitfields */ |
| #define STUSB160X_CC_POWER_MODE GENMASK(2, 0) |
| |
| /* STUSB160X_VBUS_MONITORING_CTRL bitfields */ |
| #define STUSB160X_VDD_UVLO_DISABLE BIT(0) |
| #define STUSB160X_VBUS_VSAFE0V_THRESHOLD GENMASK(2, 1) |
| #define STUSB160X_VBUS_RANGE_DISABLE BIT(4) |
| #define STUSB160X_VDD_OVLO_DISABLE BIT(6) |
| |
| enum stusb160x_pwr_mode { |
| SOURCE_WITH_ACCESSORY, |
| SINK_WITH_ACCESSORY, |
| SINK_WITHOUT_ACCESSORY, |
| DUAL_WITH_ACCESSORY, |
| DUAL_WITH_ACCESSORY_AND_TRY_SRC, |
| DUAL_WITH_ACCESSORY_AND_TRY_SNK, |
| }; |
| |
| enum stusb160x_attached_mode { |
| NO_DEVICE_ATTACHED, |
| SINK_ATTACHED, |
| SOURCE_ATTACHED, |
| DEBUG_ACCESSORY_ATTACHED, |
| AUDIO_ACCESSORY_ATTACHED, |
| }; |
| |
| struct stusb160x { |
| struct device *dev; |
| struct regmap *regmap; |
| struct regulator *vdd_supply; |
| struct regulator *vsys_supply; |
| struct regulator *vconn_supply; |
| struct regulator *main_supply; |
| |
| struct typec_port *port; |
| struct typec_capability capability; |
| struct typec_partner *partner; |
| |
| enum typec_port_type port_type; |
| enum typec_pwr_opmode pwr_opmode; |
| bool vbus_on; |
| |
| struct usb_role_switch *role_sw; |
| }; |
| |
| static bool stusb160x_reg_writeable(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case STUSB160X_ALERT_STATUS_MASK_CTRL: |
| case STUSB160X_CC_CAPABILITY_CTRL: |
| case STUSB160X_CC_VCONN_SWITCH_CTRL: |
| case STUSB160X_VCONN_MONITORING_CTRL: |
| case STUSB160X_VBUS_MONITORING_RANGE_CTRL: |
| case STUSB160X_RESET_CTRL: |
| case STUSB160X_VBUS_DISCHARGE_TIME_CTRL: |
| case STUSB160X_CC_POWER_MODE_CTRL: |
| case STUSB160X_VBUS_MONITORING_CTRL: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool stusb160x_reg_readable(struct device *dev, unsigned int reg) |
| { |
| if (reg <= 0x0A || |
| (reg >= 0x14 && reg <= 0x17) || |
| (reg >= 0x19 && reg <= 0x1D) || |
| (reg >= 0x29 && reg <= 0x2D) || |
| (reg == 0x1F || reg == 0x21 || reg == 0x24 || reg == 0x2F)) |
| return false; |
| else |
| return true; |
| } |
| |
| static bool stusb160x_reg_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case STUSB160X_ALERT_STATUS: |
| case STUSB160X_CC_CONNECTION_STATUS_TRANS: |
| case STUSB160X_CC_CONNECTION_STATUS: |
| case STUSB160X_MONITORING_STATUS_TRANS: |
| case STUSB160X_MONITORING_STATUS: |
| case STUSB160X_CC_OPERATION_STATUS: |
| case STUSB160X_HW_FAULT_STATUS_TRANS: |
| case STUSB160X_HW_FAULT_STATUS: |
| case STUSB160X_VBUS_DISCHARGE_STATUS: |
| case STUSB160X_VBUS_ENABLE_STATUS: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool stusb160x_reg_precious(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case STUSB160X_ALERT_STATUS: |
| case STUSB160X_CC_CONNECTION_STATUS_TRANS: |
| case STUSB160X_MONITORING_STATUS_TRANS: |
| case STUSB160X_HW_FAULT_STATUS_TRANS: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config stusb1600_regmap_config = { |
| .reg_bits = 8, |
| .reg_stride = 1, |
| .val_bits = 8, |
| .max_register = STUSB1600_REG_MAX, |
| .writeable_reg = stusb160x_reg_writeable, |
| .readable_reg = stusb160x_reg_readable, |
| .volatile_reg = stusb160x_reg_volatile, |
| .precious_reg = stusb160x_reg_precious, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static bool stusb160x_get_vconn(struct stusb160x *chip) |
| { |
| u32 val; |
| int ret; |
| |
| ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); |
| if (ret) { |
| dev_err(chip->dev, "Unable to get Vconn status: %d\n", ret); |
| return false; |
| } |
| |
| return !!FIELD_GET(STUSB160X_CC_VCONN_SUPPLY_EN, val); |
| } |
| |
| static int stusb160x_set_vconn(struct stusb160x *chip, bool on) |
| { |
| int ret; |
| |
| /* Manage VCONN input supply */ |
| if (chip->vconn_supply) { |
| if (on) { |
| ret = regulator_enable(chip->vconn_supply); |
| if (ret) { |
| dev_err(chip->dev, |
| "failed to enable vconn supply: %d\n", |
| ret); |
| return ret; |
| } |
| } else { |
| regulator_disable(chip->vconn_supply); |
| } |
| } |
| |
| /* Manage VCONN monitoring and power path */ |
| ret = regmap_update_bits(chip->regmap, STUSB160X_VCONN_MONITORING_CTRL, |
| STUSB160X_VCONN_MONITORING_EN, |
| on ? STUSB160X_VCONN_MONITORING_EN : 0); |
| if (ret) |
| goto vconn_reg_disable; |
| |
| return 0; |
| |
| vconn_reg_disable: |
| if (chip->vconn_supply && on) |
| regulator_disable(chip->vconn_supply); |
| |
| return ret; |
| } |
| |
| static enum typec_pwr_opmode stusb160x_get_pwr_opmode(struct stusb160x *chip) |
| { |
| u32 val; |
| int ret; |
| |
| ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); |
| if (ret) { |
| dev_err(chip->dev, "Unable to get pwr opmode: %d\n", ret); |
| return TYPEC_PWR_MODE_USB; |
| } |
| |
| return FIELD_GET(STUSB160X_CC_CURRENT_ADVERTISED, val); |
| } |
| |
| static enum typec_accessory stusb160x_get_accessory(u32 status) |
| { |
| enum stusb160x_attached_mode mode; |
| |
| mode = FIELD_GET(STUSB160X_CC_ATTACHED_MODE, status); |
| |
| switch (mode) { |
| case DEBUG_ACCESSORY_ATTACHED: |
| return TYPEC_ACCESSORY_DEBUG; |
| case AUDIO_ACCESSORY_ATTACHED: |
| return TYPEC_ACCESSORY_AUDIO; |
| default: |
| return TYPEC_ACCESSORY_NONE; |
| } |
| } |
| |
| static enum typec_role stusb160x_get_vconn_role(u32 status) |
| { |
| if (FIELD_GET(STUSB160X_CC_VCONN_SUPPLY, status)) |
| return TYPEC_SOURCE; |
| |
| return TYPEC_SINK; |
| } |
| |
| static void stusb160x_set_data_role(struct stusb160x *chip, |
| enum typec_data_role data_role, |
| bool attached) |
| { |
| enum usb_role usb_role = USB_ROLE_NONE; |
| |
| if (attached) { |
| if (data_role == TYPEC_HOST) |
| usb_role = USB_ROLE_HOST; |
| else |
| usb_role = USB_ROLE_DEVICE; |
| } |
| |
| usb_role_switch_set_role(chip->role_sw, usb_role); |
| typec_set_data_role(chip->port, data_role); |
| } |
| |
| static int stusb160x_attach(struct stusb160x *chip, u32 status) |
| { |
| struct typec_partner_desc desc; |
| int ret; |
| |
| if ((STUSB160X_CC_POWER_ROLE(status) == TYPEC_SOURCE) && |
| chip->vdd_supply) { |
| ret = regulator_enable(chip->vdd_supply); |
| if (ret) { |
| dev_err(chip->dev, |
| "Failed to enable Vbus supply: %d\n", ret); |
| return ret; |
| } |
| chip->vbus_on = true; |
| } |
| |
| desc.usb_pd = false; |
| desc.accessory = stusb160x_get_accessory(status); |
| desc.identity = NULL; |
| |
| chip->partner = typec_register_partner(chip->port, &desc); |
| if (IS_ERR(chip->partner)) { |
| ret = PTR_ERR(chip->partner); |
| goto vbus_disable; |
| } |
| |
| typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); |
| typec_set_pwr_opmode(chip->port, stusb160x_get_pwr_opmode(chip)); |
| typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); |
| stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), true); |
| |
| return 0; |
| |
| vbus_disable: |
| if (chip->vbus_on) { |
| regulator_disable(chip->vdd_supply); |
| chip->vbus_on = false; |
| } |
| |
| return ret; |
| } |
| |
| static void stusb160x_detach(struct stusb160x *chip, u32 status) |
| { |
| typec_unregister_partner(chip->partner); |
| chip->partner = NULL; |
| |
| typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); |
| typec_set_pwr_opmode(chip->port, TYPEC_PWR_MODE_USB); |
| typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); |
| stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), false); |
| |
| if (chip->vbus_on) { |
| regulator_disable(chip->vdd_supply); |
| chip->vbus_on = false; |
| } |
| } |
| |
| static irqreturn_t stusb160x_irq_handler(int irq, void *data) |
| { |
| struct stusb160x *chip = data; |
| u32 pending, trans, status; |
| int ret; |
| |
| ret = regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &pending); |
| if (ret) |
| goto err; |
| |
| if (pending & STUSB160X_CC_CONNECTION) { |
| ret = regmap_read(chip->regmap, |
| STUSB160X_CC_CONNECTION_STATUS_TRANS, &trans); |
| if (ret) |
| goto err; |
| ret = regmap_read(chip->regmap, |
| STUSB160X_CC_CONNECTION_STATUS, &status); |
| if (ret) |
| goto err; |
| |
| if (trans & STUSB160X_CC_ATTACH_TRANS) { |
| if (status & STUSB160X_CC_ATTACH) { |
| ret = stusb160x_attach(chip, status); |
| if (ret) |
| goto err; |
| } else { |
| stusb160x_detach(chip, status); |
| } |
| } |
| } |
| err: |
| return IRQ_HANDLED; |
| } |
| |
| static int stusb160x_irq_init(struct stusb160x *chip, int irq) |
| { |
| u32 status; |
| int ret; |
| |
| ret = regmap_read(chip->regmap, |
| STUSB160X_CC_CONNECTION_STATUS, &status); |
| if (ret) |
| return ret; |
| |
| if (status & STUSB160X_CC_ATTACH) { |
| ret = stusb160x_attach(chip, status); |
| if (ret) |
| dev_err(chip->dev, "attach failed: %d\n", ret); |
| } |
| |
| ret = devm_request_threaded_irq(chip->dev, irq, NULL, |
| stusb160x_irq_handler, IRQF_ONESHOT, |
| dev_name(chip->dev), chip); |
| if (ret) |
| goto partner_unregister; |
| |
| /* Unmask CC_CONNECTION events */ |
| ret = regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, |
| STUSB160X_CC_CONNECTION, 0); |
| if (ret) |
| goto partner_unregister; |
| |
| return 0; |
| |
| partner_unregister: |
| if (chip->partner) { |
| typec_unregister_partner(chip->partner); |
| chip->partner = NULL; |
| } |
| |
| return ret; |
| } |
| |
| static int stusb160x_chip_init(struct stusb160x *chip) |
| { |
| u32 val; |
| int ret; |
| |
| /* Change the default Type-C power mode */ |
| if (chip->port_type == TYPEC_PORT_SRC) |
| ret = regmap_update_bits(chip->regmap, |
| STUSB160X_CC_POWER_MODE_CTRL, |
| STUSB160X_CC_POWER_MODE, |
| SOURCE_WITH_ACCESSORY); |
| else if (chip->port_type == TYPEC_PORT_SNK) |
| ret = regmap_update_bits(chip->regmap, |
| STUSB160X_CC_POWER_MODE_CTRL, |
| STUSB160X_CC_POWER_MODE, |
| SINK_WITH_ACCESSORY); |
| else /* (chip->port_type == TYPEC_PORT_DRP) */ |
| ret = regmap_update_bits(chip->regmap, |
| STUSB160X_CC_POWER_MODE_CTRL, |
| STUSB160X_CC_POWER_MODE, |
| DUAL_WITH_ACCESSORY); |
| if (ret) |
| return ret; |
| |
| if (chip->port_type == TYPEC_PORT_SNK) |
| goto skip_src; |
| |
| /* Change the default Type-C Source power operation mode capability */ |
| ret = regmap_update_bits(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, |
| STUSB160X_CC_CURRENT_ADVERTISED, |
| FIELD_PREP(STUSB160X_CC_CURRENT_ADVERTISED, |
| chip->pwr_opmode)); |
| if (ret) |
| return ret; |
| |
| /* Manage Type-C Source Vconn supply */ |
| if (stusb160x_get_vconn(chip)) { |
| ret = stusb160x_set_vconn(chip, true); |
| if (ret) |
| return ret; |
| } |
| |
| skip_src: |
| /* Mask all events interrupts - to be unmasked with interrupt support */ |
| ret = regmap_update_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, |
| STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); |
| if (ret) |
| return ret; |
| |
| /* Read status at least once to clear any stale interrupts */ |
| regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &val); |
| regmap_read(chip->regmap, STUSB160X_CC_CONNECTION_STATUS_TRANS, &val); |
| regmap_read(chip->regmap, STUSB160X_MONITORING_STATUS_TRANS, &val); |
| regmap_read(chip->regmap, STUSB160X_HW_FAULT_STATUS_TRANS, &val); |
| |
| return 0; |
| } |
| |
| static int stusb160x_get_fw_caps(struct stusb160x *chip, |
| struct fwnode_handle *fwnode) |
| { |
| const char *cap_str; |
| int ret; |
| |
| chip->capability.fwnode = fwnode; |
| |
| /* |
| * Supported port type can be configured through device tree |
| * else it is read from chip registers in stusb160x_get_caps. |
| */ |
| ret = fwnode_property_read_string(fwnode, "power-role", &cap_str); |
| if (!ret) { |
| ret = typec_find_port_power_role(cap_str); |
| if (ret < 0) |
| return ret; |
| chip->port_type = ret; |
| } |
| chip->capability.type = chip->port_type; |
| |
| /* Skip DRP/Source capabilities in case of Sink only */ |
| if (chip->port_type == TYPEC_PORT_SNK) |
| return 0; |
| |
| if (chip->port_type == TYPEC_PORT_DRP) |
| chip->capability.prefer_role = TYPEC_SINK; |
| |
| /* |
| * Supported power operation mode can be configured through device tree |
| * else it is read from chip registers in stusb160x_get_caps. |
| */ |
| ret = fwnode_property_read_string(fwnode, "typec-power-opmode", &cap_str); |
| if (!ret) { |
| ret = typec_find_pwr_opmode(cap_str); |
| /* Power delivery not yet supported */ |
| if (ret < 0 || ret == TYPEC_PWR_MODE_PD) { |
| dev_err(chip->dev, "bad power operation mode: %d\n", ret); |
| return -EINVAL; |
| } |
| chip->pwr_opmode = ret; |
| } |
| |
| return 0; |
| } |
| |
| static int stusb160x_get_caps(struct stusb160x *chip) |
| { |
| enum typec_port_type *type = &chip->capability.type; |
| enum typec_port_data *data = &chip->capability.data; |
| enum typec_accessory *accessory = chip->capability.accessory; |
| u32 val; |
| int ret; |
| |
| chip->capability.revision = USB_TYPEC_REV_1_2; |
| |
| ret = regmap_read(chip->regmap, STUSB160X_CC_POWER_MODE_CTRL, &val); |
| if (ret) |
| return ret; |
| |
| switch (FIELD_GET(STUSB160X_CC_POWER_MODE, val)) { |
| case SOURCE_WITH_ACCESSORY: |
| *type = TYPEC_PORT_SRC; |
| *data = TYPEC_PORT_DFP; |
| *accessory++ = TYPEC_ACCESSORY_AUDIO; |
| *accessory++ = TYPEC_ACCESSORY_DEBUG; |
| break; |
| case SINK_WITH_ACCESSORY: |
| *type = TYPEC_PORT_SNK; |
| *data = TYPEC_PORT_UFP; |
| *accessory++ = TYPEC_ACCESSORY_AUDIO; |
| *accessory++ = TYPEC_ACCESSORY_DEBUG; |
| break; |
| case SINK_WITHOUT_ACCESSORY: |
| *type = TYPEC_PORT_SNK; |
| *data = TYPEC_PORT_UFP; |
| break; |
| case DUAL_WITH_ACCESSORY: |
| case DUAL_WITH_ACCESSORY_AND_TRY_SRC: |
| case DUAL_WITH_ACCESSORY_AND_TRY_SNK: |
| *type = TYPEC_PORT_DRP; |
| *data = TYPEC_PORT_DRD; |
| *accessory++ = TYPEC_ACCESSORY_AUDIO; |
| *accessory++ = TYPEC_ACCESSORY_DEBUG; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| chip->port_type = *type; |
| chip->pwr_opmode = stusb160x_get_pwr_opmode(chip); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id stusb160x_of_match[] = { |
| { .compatible = "st,stusb1600", .data = &stusb1600_regmap_config}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, stusb160x_of_match); |
| |
| static int stusb160x_probe(struct i2c_client *client) |
| { |
| struct stusb160x *chip; |
| const struct of_device_id *match; |
| struct regmap_config *regmap_config; |
| struct fwnode_handle *fwnode; |
| int ret; |
| |
| chip = devm_kzalloc(&client->dev, sizeof(struct stusb160x), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, chip); |
| |
| match = i2c_of_match_device(stusb160x_of_match, client); |
| regmap_config = (struct regmap_config *)match->data; |
| chip->regmap = devm_regmap_init_i2c(client, regmap_config); |
| if (IS_ERR(chip->regmap)) { |
| ret = PTR_ERR(chip->regmap); |
| dev_err(&client->dev, |
| "Failed to allocate register map:%d\n", ret); |
| return ret; |
| } |
| |
| chip->dev = &client->dev; |
| |
| chip->vsys_supply = devm_regulator_get_optional(chip->dev, "vsys"); |
| if (IS_ERR(chip->vsys_supply)) { |
| ret = PTR_ERR(chip->vsys_supply); |
| if (ret != -ENODEV) |
| return ret; |
| chip->vsys_supply = NULL; |
| } |
| |
| chip->vdd_supply = devm_regulator_get_optional(chip->dev, "vdd"); |
| if (IS_ERR(chip->vdd_supply)) { |
| ret = PTR_ERR(chip->vdd_supply); |
| if (ret != -ENODEV) |
| return ret; |
| chip->vdd_supply = NULL; |
| } |
| |
| chip->vconn_supply = devm_regulator_get_optional(chip->dev, "vconn"); |
| if (IS_ERR(chip->vconn_supply)) { |
| ret = PTR_ERR(chip->vconn_supply); |
| if (ret != -ENODEV) |
| return ret; |
| chip->vconn_supply = NULL; |
| } |
| |
| fwnode = device_get_named_child_node(chip->dev, "connector"); |
| if (IS_ERR(fwnode)) |
| return PTR_ERR(fwnode); |
| |
| /* |
| * When both VDD and VSYS power supplies are present, the low power |
| * supply VSYS is selected when VSYS voltage is above 3.1 V. |
| * Otherwise VDD is selected. |
| */ |
| if (chip->vdd_supply && |
| (!chip->vsys_supply || |
| (regulator_get_voltage(chip->vsys_supply) <= 3100000))) |
| chip->main_supply = chip->vdd_supply; |
| else |
| chip->main_supply = chip->vsys_supply; |
| |
| if (chip->main_supply) { |
| ret = regulator_enable(chip->main_supply); |
| if (ret) { |
| dev_err(chip->dev, |
| "Failed to enable main supply: %d\n", ret); |
| goto fwnode_put; |
| } |
| } |
| |
| /* Get configuration from chip */ |
| ret = stusb160x_get_caps(chip); |
| if (ret) { |
| dev_err(chip->dev, "Failed to get port caps: %d\n", ret); |
| goto main_reg_disable; |
| } |
| |
| /* Get optional re-configuration from device tree */ |
| ret = stusb160x_get_fw_caps(chip, fwnode); |
| if (ret) { |
| dev_err(chip->dev, "Failed to get connector caps: %d\n", ret); |
| goto main_reg_disable; |
| } |
| |
| ret = stusb160x_chip_init(chip); |
| if (ret) { |
| dev_err(chip->dev, "Failed to init port: %d\n", ret); |
| goto main_reg_disable; |
| } |
| |
| chip->port = typec_register_port(chip->dev, &chip->capability); |
| if (IS_ERR(chip->port)) { |
| ret = PTR_ERR(chip->port); |
| goto all_reg_disable; |
| } |
| |
| /* |
| * Default power operation mode initialization: will be updated upon |
| * attach/detach interrupt |
| */ |
| typec_set_pwr_opmode(chip->port, chip->pwr_opmode); |
| |
| if (client->irq) { |
| ret = stusb160x_irq_init(chip, client->irq); |
| if (ret) |
| goto port_unregister; |
| |
| chip->role_sw = fwnode_usb_role_switch_get(fwnode); |
| if (IS_ERR(chip->role_sw)) { |
| ret = PTR_ERR(chip->role_sw); |
| if (ret != -EPROBE_DEFER) |
| dev_err(chip->dev, |
| "Failed to get usb role switch: %d\n", |
| ret); |
| goto port_unregister; |
| } |
| } else { |
| /* |
| * If Source or Dual power role, need to enable VDD supply |
| * providing Vbus if present. In case of interrupt support, |
| * VDD supply will be dynamically managed upon attach/detach |
| * interrupt. |
| */ |
| if (chip->port_type != TYPEC_PORT_SNK && chip->vdd_supply) { |
| ret = regulator_enable(chip->vdd_supply); |
| if (ret) { |
| dev_err(chip->dev, |
| "Failed to enable VDD supply: %d\n", |
| ret); |
| goto port_unregister; |
| } |
| chip->vbus_on = true; |
| } |
| } |
| |
| fwnode_handle_put(fwnode); |
| |
| return 0; |
| |
| port_unregister: |
| typec_unregister_port(chip->port); |
| all_reg_disable: |
| if (stusb160x_get_vconn(chip)) |
| stusb160x_set_vconn(chip, false); |
| main_reg_disable: |
| if (chip->main_supply) |
| regulator_disable(chip->main_supply); |
| fwnode_put: |
| fwnode_handle_put(fwnode); |
| |
| return ret; |
| } |
| |
| static int stusb160x_remove(struct i2c_client *client) |
| { |
| struct stusb160x *chip = i2c_get_clientdata(client); |
| |
| if (chip->partner) { |
| typec_unregister_partner(chip->partner); |
| chip->partner = NULL; |
| } |
| |
| if (chip->vbus_on) |
| regulator_disable(chip->vdd_supply); |
| |
| if (chip->role_sw) |
| usb_role_switch_put(chip->role_sw); |
| |
| typec_unregister_port(chip->port); |
| |
| if (stusb160x_get_vconn(chip)) |
| stusb160x_set_vconn(chip, false); |
| |
| if (chip->main_supply) |
| regulator_disable(chip->main_supply); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused stusb160x_suspend(struct device *dev) |
| { |
| struct stusb160x *chip = dev_get_drvdata(dev); |
| |
| /* Mask interrupts */ |
| return regmap_update_bits(chip->regmap, |
| STUSB160X_ALERT_STATUS_MASK_CTRL, |
| STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); |
| } |
| |
| static int __maybe_unused stusb160x_resume(struct device *dev) |
| { |
| struct stusb160x *chip = dev_get_drvdata(dev); |
| u32 status; |
| int ret; |
| |
| ret = regcache_sync(chip->regmap); |
| if (ret) |
| return ret; |
| |
| /* Check if attach/detach occurred during low power */ |
| ret = regmap_read(chip->regmap, |
| STUSB160X_CC_CONNECTION_STATUS, &status); |
| if (ret) |
| return ret; |
| |
| if (chip->partner && !(status & STUSB160X_CC_ATTACH)) |
| stusb160x_detach(chip, status); |
| |
| if (!chip->partner && (status & STUSB160X_CC_ATTACH)) { |
| ret = stusb160x_attach(chip, status); |
| if (ret) |
| dev_err(chip->dev, "attach failed: %d\n", ret); |
| } |
| |
| /* Unmask interrupts */ |
| return regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, |
| STUSB160X_CC_CONNECTION, 0); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(stusb160x_pm_ops, stusb160x_suspend, stusb160x_resume); |
| |
| static struct i2c_driver stusb160x_driver = { |
| .driver = { |
| .name = "stusb160x", |
| .pm = &stusb160x_pm_ops, |
| .of_match_table = stusb160x_of_match, |
| }, |
| .probe_new = stusb160x_probe, |
| .remove = stusb160x_remove, |
| }; |
| module_i2c_driver(stusb160x_driver); |
| |
| MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics STUSB160x Type-C controller driver"); |
| MODULE_LICENSE("GPL v2"); |