| /* |
| * TI DaVinci DM355 chip specific setup |
| * |
| * Author: Kevin Hilman, Deep Root Systems, LLC |
| * |
| * 2007 (c) Deep Root Systems, LLC. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/clk/davinci.h> |
| #include <linux/clkdev.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/init.h> |
| #include <linux/platform_data/edma.h> |
| #include <linux/platform_data/gpio-davinci.h> |
| #include <linux/platform_data/spi-davinci.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_8250.h> |
| #include <linux/spi/spi.h> |
| |
| #include <asm/mach/map.h> |
| |
| #include <mach/common.h> |
| #include <mach/cputype.h> |
| #include <mach/irqs.h> |
| #include <mach/mux.h> |
| #include <mach/serial.h> |
| #include <mach/time.h> |
| |
| #include "asp.h" |
| #include "davinci.h" |
| #include "mux.h" |
| |
| #define DM355_UART2_BASE (IO_PHYS + 0x206000) |
| #define DM355_OSD_BASE (IO_PHYS + 0x70200) |
| #define DM355_VENC_BASE (IO_PHYS + 0x70400) |
| |
| /* |
| * Device specific clocks |
| */ |
| #define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ |
| |
| static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); |
| |
| static struct resource dm355_spi0_resources[] = { |
| { |
| .start = 0x01c66000, |
| .end = 0x01c667ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IRQ_DM355_SPINT0_0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct davinci_spi_platform_data dm355_spi0_pdata = { |
| .version = SPI_VERSION_1, |
| .num_chipselect = 2, |
| .cshold_bug = true, |
| .dma_event_q = EVENTQ_1, |
| .prescaler_limit = 1, |
| }; |
| static struct platform_device dm355_spi0_device = { |
| .name = "spi_davinci", |
| .id = 0, |
| .dev = { |
| .dma_mask = &dm355_spi0_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &dm355_spi0_pdata, |
| }, |
| .num_resources = ARRAY_SIZE(dm355_spi0_resources), |
| .resource = dm355_spi0_resources, |
| }; |
| |
| void __init dm355_init_spi0(unsigned chipselect_mask, |
| const struct spi_board_info *info, unsigned len) |
| { |
| /* for now, assume we need MISO */ |
| davinci_cfg_reg(DM355_SPI0_SDI); |
| |
| /* not all slaves will be wired up */ |
| if (chipselect_mask & BIT(0)) |
| davinci_cfg_reg(DM355_SPI0_SDENA0); |
| if (chipselect_mask & BIT(1)) |
| davinci_cfg_reg(DM355_SPI0_SDENA1); |
| |
| spi_register_board_info(info, len); |
| |
| platform_device_register(&dm355_spi0_device); |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| |
| #define INTMUX 0x18 |
| #define EVTMUX 0x1c |
| |
| /* |
| * Device specific mux setup |
| * |
| * soc description mux mode mode mux dbg |
| * reg offset mask mode |
| */ |
| static const struct mux_config dm355_pins[] = { |
| #ifdef CONFIG_DAVINCI_MUX |
| MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false) |
| |
| MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false) |
| MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false) |
| MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false) |
| MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false) |
| MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false) |
| MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false) |
| |
| MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false) |
| MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false) |
| |
| MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false) |
| MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false) |
| MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false) |
| MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false) |
| MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false) |
| MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false) |
| |
| MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false) |
| MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false) |
| MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false) |
| |
| INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false) |
| INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false) |
| INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) |
| |
| EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) |
| EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) |
| EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) |
| |
| MUX_CFG(DM355, VOUT_FIELD, 1, 18, 3, 1, false) |
| MUX_CFG(DM355, VOUT_FIELD_G70, 1, 18, 3, 0, false) |
| MUX_CFG(DM355, VOUT_HVSYNC, 1, 16, 1, 0, false) |
| MUX_CFG(DM355, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false) |
| MUX_CFG(DM355, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false) |
| |
| MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false) |
| MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false) |
| MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false) |
| MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false) |
| MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false) |
| MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false) |
| MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false) |
| #endif |
| }; |
| |
| static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { |
| [IRQ_DM355_CCDC_VDINT0] = 2, |
| [IRQ_DM355_CCDC_VDINT1] = 6, |
| [IRQ_DM355_CCDC_VDINT2] = 6, |
| [IRQ_DM355_IPIPE_HST] = 6, |
| [IRQ_DM355_H3AINT] = 6, |
| [IRQ_DM355_IPIPE_SDR] = 6, |
| [IRQ_DM355_IPIPEIFINT] = 6, |
| [IRQ_DM355_OSDINT] = 7, |
| [IRQ_DM355_VENCINT] = 6, |
| [IRQ_ASQINT] = 6, |
| [IRQ_IMXINT] = 6, |
| [IRQ_USBINT] = 4, |
| [IRQ_DM355_RTOINT] = 4, |
| [IRQ_DM355_UARTINT2] = 7, |
| [IRQ_DM355_TINT6] = 7, |
| [IRQ_CCINT0] = 5, /* dma */ |
| [IRQ_CCERRINT] = 5, /* dma */ |
| [IRQ_TCERRINT0] = 5, /* dma */ |
| [IRQ_TCERRINT] = 5, /* dma */ |
| [IRQ_DM355_SPINT2_1] = 7, |
| [IRQ_DM355_TINT7] = 4, |
| [IRQ_DM355_SDIOINT0] = 7, |
| [IRQ_MBXINT] = 7, |
| [IRQ_MBRINT] = 7, |
| [IRQ_MMCINT] = 7, |
| [IRQ_DM355_MMCINT1] = 7, |
| [IRQ_DM355_PWMINT3] = 7, |
| [IRQ_DDRINT] = 7, |
| [IRQ_AEMIFINT] = 7, |
| [IRQ_DM355_SDIOINT1] = 4, |
| [IRQ_TINT0_TINT12] = 2, /* clockevent */ |
| [IRQ_TINT0_TINT34] = 2, /* clocksource */ |
| [IRQ_TINT1_TINT12] = 7, /* DSP timer */ |
| [IRQ_TINT1_TINT34] = 7, /* system tick */ |
| [IRQ_PWMINT0] = 7, |
| [IRQ_PWMINT1] = 7, |
| [IRQ_PWMINT2] = 7, |
| [IRQ_I2C] = 3, |
| [IRQ_UARTINT0] = 3, |
| [IRQ_UARTINT1] = 3, |
| [IRQ_DM355_SPINT0_0] = 3, |
| [IRQ_DM355_SPINT0_1] = 3, |
| [IRQ_DM355_GPIO0] = 3, |
| [IRQ_DM355_GPIO1] = 7, |
| [IRQ_DM355_GPIO2] = 4, |
| [IRQ_DM355_GPIO3] = 4, |
| [IRQ_DM355_GPIO4] = 7, |
| [IRQ_DM355_GPIO5] = 7, |
| [IRQ_DM355_GPIO6] = 7, |
| [IRQ_DM355_GPIO7] = 7, |
| [IRQ_DM355_GPIO8] = 7, |
| [IRQ_DM355_GPIO9] = 7, |
| [IRQ_DM355_GPIOBNK0] = 7, |
| [IRQ_DM355_GPIOBNK1] = 7, |
| [IRQ_DM355_GPIOBNK2] = 7, |
| [IRQ_DM355_GPIOBNK3] = 7, |
| [IRQ_DM355_GPIOBNK4] = 7, |
| [IRQ_DM355_GPIOBNK5] = 7, |
| [IRQ_DM355_GPIOBNK6] = 7, |
| [IRQ_COMMTX] = 7, |
| [IRQ_COMMRX] = 7, |
| [IRQ_EMUINT] = 7, |
| }; |
| |
| /*----------------------------------------------------------------------*/ |
| |
| static s8 queue_priority_mapping[][2] = { |
| /* {event queue no, Priority} */ |
| {0, 3}, |
| {1, 7}, |
| {-1, -1}, |
| }; |
| |
| static const struct dma_slave_map dm355_edma_map[] = { |
| { "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) }, |
| { "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) }, |
| { "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) }, |
| { "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) }, |
| { "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) }, |
| { "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) }, |
| { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) }, |
| { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) }, |
| { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) }, |
| { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) }, |
| { "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) }, |
| { "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) }, |
| { "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) }, |
| { "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) }, |
| }; |
| |
| static struct edma_soc_info dm355_edma_pdata = { |
| .queue_priority_mapping = queue_priority_mapping, |
| .default_queue = EVENTQ_1, |
| .slave_map = dm355_edma_map, |
| .slavecnt = ARRAY_SIZE(dm355_edma_map), |
| }; |
| |
| static struct resource edma_resources[] = { |
| { |
| .name = "edma3_cc", |
| .start = 0x01c00000, |
| .end = 0x01c00000 + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .name = "edma3_tc0", |
| .start = 0x01c10000, |
| .end = 0x01c10000 + SZ_1K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .name = "edma3_tc1", |
| .start = 0x01c10400, |
| .end = 0x01c10400 + SZ_1K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .name = "edma3_ccint", |
| .start = IRQ_CCINT0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "edma3_ccerrint", |
| .start = IRQ_CCERRINT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| /* not using (or muxing) TC*_ERR */ |
| }; |
| |
| static const struct platform_device_info dm355_edma_device __initconst = { |
| .name = "edma", |
| .id = 0, |
| .dma_mask = DMA_BIT_MASK(32), |
| .res = edma_resources, |
| .num_res = ARRAY_SIZE(edma_resources), |
| .data = &dm355_edma_pdata, |
| .size_data = sizeof(dm355_edma_pdata), |
| }; |
| |
| static struct resource dm355_asp1_resources[] = { |
| { |
| .name = "mpu", |
| .start = DAVINCI_ASP1_BASE, |
| .end = DAVINCI_ASP1_BASE + SZ_8K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = DAVINCI_DMA_ASP1_TX, |
| .end = DAVINCI_DMA_ASP1_TX, |
| .flags = IORESOURCE_DMA, |
| }, |
| { |
| .start = DAVINCI_DMA_ASP1_RX, |
| .end = DAVINCI_DMA_ASP1_RX, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct platform_device dm355_asp1_device = { |
| .name = "davinci-mcbsp", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(dm355_asp1_resources), |
| .resource = dm355_asp1_resources, |
| }; |
| |
| static void dm355_ccdc_setup_pinmux(void) |
| { |
| davinci_cfg_reg(DM355_VIN_PCLK); |
| davinci_cfg_reg(DM355_VIN_CAM_WEN); |
| davinci_cfg_reg(DM355_VIN_CAM_VD); |
| davinci_cfg_reg(DM355_VIN_CAM_HD); |
| davinci_cfg_reg(DM355_VIN_YIN_EN); |
| davinci_cfg_reg(DM355_VIN_CINL_EN); |
| davinci_cfg_reg(DM355_VIN_CINH_EN); |
| } |
| |
| static struct resource dm355_vpss_resources[] = { |
| { |
| /* VPSS BL Base address */ |
| .name = "vpss", |
| .start = 0x01c70800, |
| .end = 0x01c70800 + 0xff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| /* VPSS CLK Base address */ |
| .name = "vpss", |
| .start = 0x01c70000, |
| .end = 0x01c70000 + 0xf, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device dm355_vpss_device = { |
| .name = "vpss", |
| .id = -1, |
| .dev.platform_data = "dm355_vpss", |
| .num_resources = ARRAY_SIZE(dm355_vpss_resources), |
| .resource = dm355_vpss_resources, |
| }; |
| |
| static struct resource vpfe_resources[] = { |
| { |
| .start = IRQ_VDINT0, |
| .end = IRQ_VDINT0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_VDINT1, |
| .end = IRQ_VDINT1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); |
| static struct resource dm355_ccdc_resource[] = { |
| /* CCDC Base address */ |
| { |
| .flags = IORESOURCE_MEM, |
| .start = 0x01c70600, |
| .end = 0x01c70600 + 0x1ff, |
| }, |
| }; |
| static struct platform_device dm355_ccdc_dev = { |
| .name = "dm355_ccdc", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(dm355_ccdc_resource), |
| .resource = dm355_ccdc_resource, |
| .dev = { |
| .dma_mask = &vpfe_capture_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = dm355_ccdc_setup_pinmux, |
| }, |
| }; |
| |
| static struct platform_device vpfe_capture_dev = { |
| .name = CAPTURE_DRV_NAME, |
| .id = -1, |
| .num_resources = ARRAY_SIZE(vpfe_resources), |
| .resource = vpfe_resources, |
| .dev = { |
| .dma_mask = &vpfe_capture_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| static struct resource dm355_osd_resources[] = { |
| { |
| .start = DM355_OSD_BASE, |
| .end = DM355_OSD_BASE + 0x17f, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device dm355_osd_dev = { |
| .name = DM355_VPBE_OSD_SUBDEV_NAME, |
| .id = -1, |
| .num_resources = ARRAY_SIZE(dm355_osd_resources), |
| .resource = dm355_osd_resources, |
| .dev = { |
| .dma_mask = &vpfe_capture_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| static struct resource dm355_venc_resources[] = { |
| { |
| .start = IRQ_VENCINT, |
| .end = IRQ_VENCINT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| /* venc registers io space */ |
| { |
| .start = DM355_VENC_BASE, |
| .end = DM355_VENC_BASE + 0x17f, |
| .flags = IORESOURCE_MEM, |
| }, |
| /* VDAC config register io space */ |
| { |
| .start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG, |
| .end = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct resource dm355_v4l2_disp_resources[] = { |
| { |
| .start = IRQ_VENCINT, |
| .end = IRQ_VENCINT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| /* venc registers io space */ |
| { |
| .start = DM355_VENC_BASE, |
| .end = DM355_VENC_BASE + 0x17f, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static int dm355_vpbe_setup_pinmux(u32 if_type, int field) |
| { |
| switch (if_type) { |
| case MEDIA_BUS_FMT_SGRBG8_1X8: |
| davinci_cfg_reg(DM355_VOUT_FIELD_G70); |
| break; |
| case MEDIA_BUS_FMT_YUYV10_1X20: |
| if (field) |
| davinci_cfg_reg(DM355_VOUT_FIELD); |
| else |
| davinci_cfg_reg(DM355_VOUT_FIELD_G70); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| davinci_cfg_reg(DM355_VOUT_COUTL_EN); |
| davinci_cfg_reg(DM355_VOUT_COUTH_EN); |
| |
| return 0; |
| } |
| |
| static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type, |
| unsigned int pclock) |
| { |
| void __iomem *vpss_clk_ctrl_reg; |
| |
| vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL); |
| |
| switch (type) { |
| case VPBE_ENC_STD: |
| writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE, |
| vpss_clk_ctrl_reg); |
| break; |
| case VPBE_ENC_DV_TIMINGS: |
| if (pclock > 27000000) |
| /* |
| * For HD, use external clock source since we cannot |
| * support HD mode with internal clocks. |
| */ |
| writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_device dm355_vpbe_display = { |
| .name = "vpbe-v4l2", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(dm355_v4l2_disp_resources), |
| .resource = dm355_v4l2_disp_resources, |
| .dev = { |
| .dma_mask = &vpfe_capture_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| static struct venc_platform_data dm355_venc_pdata = { |
| .setup_pinmux = dm355_vpbe_setup_pinmux, |
| .setup_clock = dm355_venc_setup_clock, |
| }; |
| |
| static struct platform_device dm355_venc_dev = { |
| .name = DM355_VPBE_VENC_SUBDEV_NAME, |
| .id = -1, |
| .num_resources = ARRAY_SIZE(dm355_venc_resources), |
| .resource = dm355_venc_resources, |
| .dev = { |
| .dma_mask = &vpfe_capture_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = (void *)&dm355_venc_pdata, |
| }, |
| }; |
| |
| static struct platform_device dm355_vpbe_dev = { |
| .name = "vpbe_controller", |
| .id = -1, |
| .dev = { |
| .dma_mask = &vpfe_capture_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |
| |
| static struct resource dm355_gpio_resources[] = { |
| { /* registers */ |
| .start = DAVINCI_GPIO_BASE, |
| .end = DAVINCI_GPIO_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { /* interrupt */ |
| .start = IRQ_DM355_GPIOBNK0, |
| .end = IRQ_DM355_GPIOBNK0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_DM355_GPIOBNK1, |
| .end = IRQ_DM355_GPIOBNK1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_DM355_GPIOBNK2, |
| .end = IRQ_DM355_GPIOBNK2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_DM355_GPIOBNK3, |
| .end = IRQ_DM355_GPIOBNK3, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_DM355_GPIOBNK4, |
| .end = IRQ_DM355_GPIOBNK4, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_DM355_GPIOBNK5, |
| .end = IRQ_DM355_GPIOBNK5, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = IRQ_DM355_GPIOBNK6, |
| .end = IRQ_DM355_GPIOBNK6, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct davinci_gpio_platform_data dm355_gpio_platform_data = { |
| .no_auto_base = true, |
| .base = 0, |
| .ngpio = 104, |
| }; |
| |
| int __init dm355_gpio_register(void) |
| { |
| return davinci_gpio_register(dm355_gpio_resources, |
| ARRAY_SIZE(dm355_gpio_resources), |
| &dm355_gpio_platform_data); |
| } |
| /*----------------------------------------------------------------------*/ |
| |
| static struct map_desc dm355_io_desc[] = { |
| { |
| .virtual = IO_VIRT, |
| .pfn = __phys_to_pfn(IO_PHYS), |
| .length = IO_SIZE, |
| .type = MT_DEVICE |
| }, |
| }; |
| |
| /* Contents of JTAG ID register used to identify exact cpu type */ |
| static struct davinci_id dm355_ids[] = { |
| { |
| .variant = 0x0, |
| .part_no = 0xb73b, |
| .manufacturer = 0x00f, |
| .cpu_id = DAVINCI_CPU_ID_DM355, |
| .name = "dm355", |
| }, |
| }; |
| |
| /* |
| * T0_BOT: Timer 0, bottom: clockevent source for hrtimers |
| * T0_TOP: Timer 0, top : clocksource for generic timekeeping |
| * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) |
| * T1_TOP: Timer 1, top : <unused> |
| */ |
| static struct davinci_timer_info dm355_timer_info = { |
| .timers = davinci_timer_instance, |
| .clockevent_id = T0_BOT, |
| .clocksource_id = T0_TOP, |
| }; |
| |
| static struct plat_serial8250_port dm355_serial0_platform_data[] = { |
| { |
| .mapbase = DAVINCI_UART0_BASE, |
| .irq = IRQ_UARTINT0, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | |
| UPF_IOREMAP, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| }, |
| { |
| .flags = 0, |
| } |
| }; |
| static struct plat_serial8250_port dm355_serial1_platform_data[] = { |
| { |
| .mapbase = DAVINCI_UART1_BASE, |
| .irq = IRQ_UARTINT1, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | |
| UPF_IOREMAP, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| }, |
| { |
| .flags = 0, |
| } |
| }; |
| static struct plat_serial8250_port dm355_serial2_platform_data[] = { |
| { |
| .mapbase = DM355_UART2_BASE, |
| .irq = IRQ_DM355_UARTINT2, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | |
| UPF_IOREMAP, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| }, |
| { |
| .flags = 0, |
| } |
| }; |
| |
| struct platform_device dm355_serial_device[] = { |
| { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM, |
| .dev = { |
| .platform_data = dm355_serial0_platform_data, |
| } |
| }, |
| { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM1, |
| .dev = { |
| .platform_data = dm355_serial1_platform_data, |
| } |
| }, |
| { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM2, |
| .dev = { |
| .platform_data = dm355_serial2_platform_data, |
| } |
| }, |
| { |
| } |
| }; |
| |
| static const struct davinci_soc_info davinci_soc_info_dm355 = { |
| .io_desc = dm355_io_desc, |
| .io_desc_num = ARRAY_SIZE(dm355_io_desc), |
| .jtag_id_reg = 0x01c40028, |
| .ids = dm355_ids, |
| .ids_num = ARRAY_SIZE(dm355_ids), |
| .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, |
| .pinmux_pins = dm355_pins, |
| .pinmux_pins_num = ARRAY_SIZE(dm355_pins), |
| .intc_base = DAVINCI_ARM_INTC_BASE, |
| .intc_type = DAVINCI_INTC_TYPE_AINTC, |
| .intc_irq_prios = dm355_default_priorities, |
| .intc_irq_num = DAVINCI_N_AINTC_IRQ, |
| .timer_info = &dm355_timer_info, |
| .sram_dma = 0x00010000, |
| .sram_len = SZ_32K, |
| }; |
| |
| void __init dm355_init_asp1(u32 evt_enable) |
| { |
| /* we don't use ASP1 IRQs, or we'd need to mux them ... */ |
| if (evt_enable & ASP1_TX_EVT_EN) |
| davinci_cfg_reg(DM355_EVT8_ASP1_TX); |
| |
| if (evt_enable & ASP1_RX_EVT_EN) |
| davinci_cfg_reg(DM355_EVT9_ASP1_RX); |
| |
| platform_device_register(&dm355_asp1_device); |
| } |
| |
| void __init dm355_init(void) |
| { |
| davinci_common_init(&davinci_soc_info_dm355); |
| davinci_map_sysmod(); |
| } |
| |
| void __init dm355_init_time(void) |
| { |
| void __iomem *pll1, *psc; |
| struct clk *clk; |
| |
| clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ); |
| |
| pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); |
| dm355_pll1_init(NULL, pll1, NULL); |
| |
| psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); |
| dm355_psc_init(NULL, psc); |
| |
| clk = clk_get(NULL, "timer0"); |
| |
| davinci_timer_init(clk); |
| } |
| |
| static struct resource dm355_pll2_resources[] = { |
| { |
| .start = DAVINCI_PLL2_BASE, |
| .end = DAVINCI_PLL2_BASE + SZ_1K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device dm355_pll2_device = { |
| .name = "dm355-pll2", |
| .id = -1, |
| .resource = dm355_pll2_resources, |
| .num_resources = ARRAY_SIZE(dm355_pll2_resources), |
| }; |
| |
| void __init dm355_register_clocks(void) |
| { |
| /* PLL1 and PSC are registered in dm355_init_time() */ |
| platform_device_register(&dm355_pll2_device); |
| } |
| |
| int __init dm355_init_video(struct vpfe_config *vpfe_cfg, |
| struct vpbe_config *vpbe_cfg) |
| { |
| if (vpfe_cfg || vpbe_cfg) |
| platform_device_register(&dm355_vpss_device); |
| |
| if (vpfe_cfg) { |
| vpfe_capture_dev.dev.platform_data = vpfe_cfg; |
| platform_device_register(&dm355_ccdc_dev); |
| platform_device_register(&vpfe_capture_dev); |
| } |
| |
| if (vpbe_cfg) { |
| dm355_vpbe_dev.dev.platform_data = vpbe_cfg; |
| platform_device_register(&dm355_osd_dev); |
| platform_device_register(&dm355_venc_dev); |
| platform_device_register(&dm355_vpbe_dev); |
| platform_device_register(&dm355_vpbe_display); |
| } |
| |
| return 0; |
| } |
| |
| static int __init dm355_init_devices(void) |
| { |
| struct platform_device *edma_pdev; |
| int ret = 0; |
| |
| if (!cpu_is_davinci_dm355()) |
| return 0; |
| |
| davinci_cfg_reg(DM355_INT_EDMA_CC); |
| edma_pdev = platform_device_register_full(&dm355_edma_device); |
| if (IS_ERR(edma_pdev)) { |
| pr_warn("%s: Failed to register eDMA\n", __func__); |
| return PTR_ERR(edma_pdev); |
| } |
| |
| ret = davinci_init_wdt(); |
| if (ret) |
| pr_warn("%s: watchdog init failed: %d\n", __func__, ret); |
| |
| return ret; |
| } |
| postcore_initcall(dm355_init_devices); |