| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Jailhouse paravirt_ops implementation |
| * |
| * Copyright (c) Siemens AG, 2015-2017 |
| * |
| * Authors: |
| * Jan Kiszka <jan.kiszka@siemens.com> |
| */ |
| |
| #include <linux/acpi_pmtmr.h> |
| #include <linux/kernel.h> |
| #include <linux/reboot.h> |
| #include <asm/apic.h> |
| #include <asm/cpu.h> |
| #include <asm/hypervisor.h> |
| #include <asm/i8259.h> |
| #include <asm/irqdomain.h> |
| #include <asm/pci_x86.h> |
| #include <asm/reboot.h> |
| #include <asm/setup.h> |
| #include <asm/jailhouse_para.h> |
| |
| static __initdata struct jailhouse_setup_data setup_data; |
| static unsigned int precalibrated_tsc_khz; |
| |
| static uint32_t jailhouse_cpuid_base(void) |
| { |
| if (boot_cpu_data.cpuid_level < 0 || |
| !boot_cpu_has(X86_FEATURE_HYPERVISOR)) |
| return 0; |
| |
| return hypervisor_cpuid_base("Jailhouse\0\0\0", 0); |
| } |
| |
| static uint32_t __init jailhouse_detect(void) |
| { |
| return jailhouse_cpuid_base(); |
| } |
| |
| static void jailhouse_get_wallclock(struct timespec64 *now) |
| { |
| memset(now, 0, sizeof(*now)); |
| } |
| |
| static void __init jailhouse_timer_init(void) |
| { |
| lapic_timer_frequency = setup_data.apic_khz * (1000 / HZ); |
| } |
| |
| static unsigned long jailhouse_get_tsc(void) |
| { |
| return precalibrated_tsc_khz; |
| } |
| |
| static void __init jailhouse_x2apic_init(void) |
| { |
| #ifdef CONFIG_X86_X2APIC |
| if (!x2apic_enabled()) |
| return; |
| /* |
| * We do not have access to IR inside Jailhouse non-root cells. So |
| * we have to run in physical mode. |
| */ |
| x2apic_phys = 1; |
| /* |
| * This will trigger the switch to apic_x2apic_phys. Empty OEM IDs |
| * ensure that only this APIC driver picks up the call. |
| */ |
| default_acpi_madt_oem_check("", ""); |
| #endif |
| } |
| |
| static void __init jailhouse_get_smp_config(unsigned int early) |
| { |
| struct ioapic_domain_cfg ioapic_cfg = { |
| .type = IOAPIC_DOMAIN_STRICT, |
| .ops = &mp_ioapic_irqdomain_ops, |
| }; |
| struct mpc_intsrc mp_irq = { |
| .type = MP_INTSRC, |
| .irqtype = mp_INT, |
| .irqflag = MP_IRQPOL_ACTIVE_HIGH | MP_IRQTRIG_EDGE, |
| }; |
| unsigned int cpu; |
| |
| jailhouse_x2apic_init(); |
| |
| register_lapic_address(0xfee00000); |
| |
| for (cpu = 0; cpu < setup_data.num_cpus; cpu++) { |
| generic_processor_info(setup_data.cpu_ids[cpu], |
| boot_cpu_apic_version); |
| } |
| |
| smp_found_config = 1; |
| |
| if (setup_data.standard_ioapic) { |
| mp_register_ioapic(0, 0xfec00000, gsi_top, &ioapic_cfg); |
| |
| /* Register 1:1 mapping for legacy UART IRQs 3 and 4 */ |
| mp_irq.srcbusirq = mp_irq.dstirq = 3; |
| mp_save_irq(&mp_irq); |
| |
| mp_irq.srcbusirq = mp_irq.dstirq = 4; |
| mp_save_irq(&mp_irq); |
| } |
| } |
| |
| static void jailhouse_no_restart(void) |
| { |
| pr_notice("Jailhouse: Restart not supported, halting\n"); |
| machine_halt(); |
| } |
| |
| static int __init jailhouse_pci_arch_init(void) |
| { |
| pci_direct_init(1); |
| |
| /* |
| * There are no bridges on the virtual PCI root bus under Jailhouse, |
| * thus no other way to discover all devices than a full scan. |
| * Respect any overrides via the command line, though. |
| */ |
| if (pcibios_last_bus < 0) |
| pcibios_last_bus = 0xff; |
| |
| #ifdef CONFIG_PCI_MMCONFIG |
| if (setup_data.pci_mmconfig_base) { |
| pci_mmconfig_add(0, 0, pcibios_last_bus, |
| setup_data.pci_mmconfig_base); |
| pci_mmcfg_arch_init(); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static void __init jailhouse_init_platform(void) |
| { |
| u64 pa_data = boot_params.hdr.setup_data; |
| struct setup_data header; |
| void *mapping; |
| |
| x86_init.irqs.pre_vector_init = x86_init_noop; |
| x86_init.timers.timer_init = jailhouse_timer_init; |
| x86_init.mpparse.get_smp_config = jailhouse_get_smp_config; |
| x86_init.pci.arch_init = jailhouse_pci_arch_init; |
| |
| x86_platform.calibrate_cpu = jailhouse_get_tsc; |
| x86_platform.calibrate_tsc = jailhouse_get_tsc; |
| x86_platform.get_wallclock = jailhouse_get_wallclock; |
| x86_platform.legacy.rtc = 0; |
| x86_platform.legacy.warm_reset = 0; |
| x86_platform.legacy.i8042 = X86_LEGACY_I8042_PLATFORM_ABSENT; |
| |
| legacy_pic = &null_legacy_pic; |
| |
| machine_ops.emergency_restart = jailhouse_no_restart; |
| |
| while (pa_data) { |
| mapping = early_memremap(pa_data, sizeof(header)); |
| memcpy(&header, mapping, sizeof(header)); |
| early_memunmap(mapping, sizeof(header)); |
| |
| if (header.type == SETUP_JAILHOUSE && |
| header.len >= sizeof(setup_data)) { |
| pa_data += offsetof(struct setup_data, data); |
| |
| mapping = early_memremap(pa_data, sizeof(setup_data)); |
| memcpy(&setup_data, mapping, sizeof(setup_data)); |
| early_memunmap(mapping, sizeof(setup_data)); |
| |
| break; |
| } |
| |
| pa_data = header.next; |
| } |
| |
| if (!pa_data) |
| panic("Jailhouse: No valid setup data found"); |
| |
| if (setup_data.compatible_version > JAILHOUSE_SETUP_REQUIRED_VERSION) |
| panic("Jailhouse: Unsupported setup data structure"); |
| |
| pmtmr_ioport = setup_data.pm_timer_address; |
| pr_debug("Jailhouse: PM-Timer IO Port: %#x\n", pmtmr_ioport); |
| |
| precalibrated_tsc_khz = setup_data.tsc_khz; |
| setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); |
| |
| pci_probe = 0; |
| |
| /* |
| * Avoid that the kernel complains about missing ACPI tables - there |
| * are none in a non-root cell. |
| */ |
| disable_acpi(); |
| } |
| |
| bool jailhouse_paravirt(void) |
| { |
| return jailhouse_cpuid_base() != 0; |
| } |
| |
| static bool jailhouse_x2apic_available(void) |
| { |
| /* |
| * The x2APIC is only available if the root cell enabled it. Jailhouse |
| * does not support switching between xAPIC and x2APIC. |
| */ |
| return x2apic_enabled(); |
| } |
| |
| const struct hypervisor_x86 x86_hyper_jailhouse __refconst = { |
| .name = "Jailhouse", |
| .detect = jailhouse_detect, |
| .init.init_platform = jailhouse_init_platform, |
| .init.x2apic_available = jailhouse_x2apic_available, |
| }; |