| /* |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| * Author: Rob Clark <rob@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/list.h> |
| |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_edid.h> |
| |
| #include "omap_drv.h" |
| |
| /* |
| * encoder funcs |
| */ |
| |
| #define to_omap_encoder(x) container_of(x, struct omap_encoder, base) |
| |
| /* The encoder and connector both map to same dssdev.. the encoder |
| * handles the 'active' parts, ie. anything the modifies the state |
| * of the hw, and the connector handles the 'read-only' parts, like |
| * detecting connection and reading edid. |
| */ |
| struct omap_encoder { |
| struct drm_encoder base; |
| struct omap_dss_device *output; |
| struct omap_dss_device *display; |
| }; |
| |
| static void omap_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct omap_encoder *omap_encoder = to_omap_encoder(encoder); |
| |
| drm_encoder_cleanup(encoder); |
| kfree(omap_encoder); |
| } |
| |
| static const struct drm_encoder_funcs omap_encoder_funcs = { |
| .destroy = omap_encoder_destroy, |
| }; |
| |
| static void omap_encoder_hdmi_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct omap_encoder *omap_encoder = to_omap_encoder(encoder); |
| struct omap_dss_device *dssdev = omap_encoder->output; |
| struct drm_connector *connector; |
| bool hdmi_mode; |
| |
| hdmi_mode = false; |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| if (connector->encoder == encoder) { |
| hdmi_mode = omap_connector_get_hdmi_mode(connector); |
| break; |
| } |
| } |
| |
| if (dssdev->ops->hdmi.set_hdmi_mode) |
| dssdev->ops->hdmi.set_hdmi_mode(dssdev, hdmi_mode); |
| |
| if (hdmi_mode && dssdev->ops->hdmi.set_infoframe) { |
| struct hdmi_avi_infoframe avi; |
| int r; |
| |
| r = drm_hdmi_avi_infoframe_from_display_mode(&avi, adjusted_mode, |
| false); |
| if (r == 0) |
| dssdev->ops->hdmi.set_infoframe(dssdev, &avi); |
| } |
| } |
| |
| static void omap_encoder_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct omap_encoder *omap_encoder = to_omap_encoder(encoder); |
| struct omap_dss_device *dssdev; |
| struct videomode vm = { 0 }; |
| |
| drm_display_mode_to_videomode(adjusted_mode, &vm); |
| |
| /* |
| * HACK: This fixes the vm flags. |
| * struct drm_display_mode does not contain the VSYNC/HSYNC/DE flags and |
| * they get lost when converting back and forth between struct |
| * drm_display_mode and struct videomode. The hack below goes and |
| * fetches the missing flags. |
| * |
| * A better solution is to use DRM's bus-flags through the whole driver. |
| */ |
| for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) { |
| unsigned long bus_flags = dssdev->bus_flags; |
| |
| if (!(vm.flags & (DISPLAY_FLAGS_DE_LOW | |
| DISPLAY_FLAGS_DE_HIGH))) { |
| if (bus_flags & DRM_BUS_FLAG_DE_LOW) |
| vm.flags |= DISPLAY_FLAGS_DE_LOW; |
| else if (bus_flags & DRM_BUS_FLAG_DE_HIGH) |
| vm.flags |= DISPLAY_FLAGS_DE_HIGH; |
| } |
| |
| if (!(vm.flags & (DISPLAY_FLAGS_PIXDATA_POSEDGE | |
| DISPLAY_FLAGS_PIXDATA_NEGEDGE))) { |
| if (bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE) |
| vm.flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE; |
| else if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) |
| vm.flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE; |
| } |
| |
| if (!(vm.flags & (DISPLAY_FLAGS_SYNC_POSEDGE | |
| DISPLAY_FLAGS_SYNC_NEGEDGE))) { |
| if (bus_flags & DRM_BUS_FLAG_SYNC_POSEDGE) |
| vm.flags |= DISPLAY_FLAGS_SYNC_POSEDGE; |
| else if (bus_flags & DRM_BUS_FLAG_SYNC_NEGEDGE) |
| vm.flags |= DISPLAY_FLAGS_SYNC_NEGEDGE; |
| } |
| } |
| |
| /* Set timings for all devices in the display pipeline. */ |
| dss_mgr_set_timings(omap_encoder->output, &vm); |
| |
| for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) { |
| if (dssdev->ops->set_timings) |
| dssdev->ops->set_timings(dssdev, &vm); |
| } |
| |
| /* Set the HDMI mode and HDMI infoframe if applicable. */ |
| if (omap_encoder->output->output_type == OMAP_DISPLAY_TYPE_HDMI) |
| omap_encoder_hdmi_mode_set(encoder, adjusted_mode); |
| } |
| |
| static void omap_encoder_disable(struct drm_encoder *encoder) |
| { |
| struct omap_encoder *omap_encoder = to_omap_encoder(encoder); |
| struct omap_dss_device *dssdev = omap_encoder->display; |
| |
| dssdev->ops->disable(dssdev); |
| } |
| |
| static void omap_encoder_enable(struct drm_encoder *encoder) |
| { |
| struct omap_encoder *omap_encoder = to_omap_encoder(encoder); |
| struct omap_dss_device *dssdev = omap_encoder->display; |
| int r; |
| |
| r = dssdev->ops->enable(dssdev); |
| if (r) |
| dev_err(encoder->dev->dev, |
| "Failed to enable display '%s': %d\n", |
| dssdev->name, r); |
| } |
| |
| static int omap_encoder_atomic_check(struct drm_encoder *encoder, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct omap_encoder *omap_encoder = to_omap_encoder(encoder); |
| enum omap_channel channel = omap_encoder->output->dispc_channel; |
| struct drm_device *dev = encoder->dev; |
| struct omap_drm_private *priv = dev->dev_private; |
| struct omap_dss_device *dssdev; |
| struct videomode vm = { 0 }; |
| int ret; |
| |
| drm_display_mode_to_videomode(&crtc_state->mode, &vm); |
| |
| ret = priv->dispc_ops->mgr_check_timings(priv->dispc, channel, &vm); |
| if (ret) |
| goto done; |
| |
| for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) { |
| if (!dssdev->ops->check_timings) |
| continue; |
| |
| ret = dssdev->ops->check_timings(dssdev, &vm); |
| if (ret) |
| goto done; |
| } |
| |
| drm_display_mode_from_videomode(&vm, &crtc_state->adjusted_mode); |
| |
| done: |
| if (ret) |
| dev_err(dev->dev, "invalid timings: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = { |
| .mode_set = omap_encoder_mode_set, |
| .disable = omap_encoder_disable, |
| .enable = omap_encoder_enable, |
| .atomic_check = omap_encoder_atomic_check, |
| }; |
| |
| /* initialize encoder */ |
| struct drm_encoder *omap_encoder_init(struct drm_device *dev, |
| struct omap_dss_device *output, |
| struct omap_dss_device *display) |
| { |
| struct drm_encoder *encoder = NULL; |
| struct omap_encoder *omap_encoder; |
| |
| omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL); |
| if (!omap_encoder) |
| goto fail; |
| |
| omap_encoder->output = output; |
| omap_encoder->display = display; |
| |
| encoder = &omap_encoder->base; |
| |
| drm_encoder_init(dev, encoder, &omap_encoder_funcs, |
| DRM_MODE_ENCODER_TMDS, NULL); |
| drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs); |
| |
| return encoder; |
| |
| fail: |
| if (encoder) |
| omap_encoder_destroy(encoder); |
| |
| return NULL; |
| } |