| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/bitops.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/property.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/watchdog.h> |
| |
| #define PON_INT_RT_STS 0x10 |
| #define PMIC_WD_BARK_STS_BIT BIT(6) |
| |
| #define PON_PMIC_WD_RESET_S1_TIMER 0x54 |
| #define PON_PMIC_WD_RESET_S2_TIMER 0x55 |
| |
| #define PON_PMIC_WD_RESET_S2_CTL 0x56 |
| #define RESET_TYPE_WARM 0x01 |
| #define RESET_TYPE_SHUTDOWN 0x04 |
| #define RESET_TYPE_HARD 0x07 |
| |
| #define PON_PMIC_WD_RESET_S2_CTL2 0x57 |
| #define S2_RESET_EN_BIT BIT(7) |
| |
| #define PON_PMIC_WD_RESET_PET 0x58 |
| #define WATCHDOG_PET_BIT BIT(0) |
| |
| #define PM8916_WDT_DEFAULT_TIMEOUT 32 |
| #define PM8916_WDT_MIN_TIMEOUT 1 |
| #define PM8916_WDT_MAX_TIMEOUT 127 |
| |
| struct pm8916_wdt { |
| struct regmap *regmap; |
| struct watchdog_device wdev; |
| u32 baseaddr; |
| }; |
| |
| static int pm8916_wdt_start(struct watchdog_device *wdev) |
| { |
| struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev); |
| |
| return regmap_update_bits(wdt->regmap, |
| wdt->baseaddr + PON_PMIC_WD_RESET_S2_CTL2, |
| S2_RESET_EN_BIT, S2_RESET_EN_BIT); |
| } |
| |
| static int pm8916_wdt_stop(struct watchdog_device *wdev) |
| { |
| struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev); |
| |
| return regmap_update_bits(wdt->regmap, |
| wdt->baseaddr + PON_PMIC_WD_RESET_S2_CTL2, |
| S2_RESET_EN_BIT, 0); |
| } |
| |
| static int pm8916_wdt_ping(struct watchdog_device *wdev) |
| { |
| struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev); |
| |
| return regmap_update_bits(wdt->regmap, |
| wdt->baseaddr + PON_PMIC_WD_RESET_PET, |
| WATCHDOG_PET_BIT, WATCHDOG_PET_BIT); |
| } |
| |
| static int pm8916_wdt_configure_timers(struct watchdog_device *wdev) |
| { |
| struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev); |
| int err; |
| |
| err = regmap_write(wdt->regmap, |
| wdt->baseaddr + PON_PMIC_WD_RESET_S1_TIMER, |
| wdev->timeout - wdev->pretimeout); |
| if (err) |
| return err; |
| |
| return regmap_write(wdt->regmap, |
| wdt->baseaddr + PON_PMIC_WD_RESET_S2_TIMER, |
| wdev->pretimeout); |
| } |
| |
| static int pm8916_wdt_set_timeout(struct watchdog_device *wdev, |
| unsigned int timeout) |
| { |
| wdev->timeout = timeout; |
| |
| return pm8916_wdt_configure_timers(wdev); |
| } |
| |
| static int pm8916_wdt_set_pretimeout(struct watchdog_device *wdev, |
| unsigned int pretimeout) |
| { |
| wdev->pretimeout = pretimeout; |
| |
| return pm8916_wdt_configure_timers(wdev); |
| } |
| |
| static irqreturn_t pm8916_wdt_isr(int irq, void *arg) |
| { |
| struct pm8916_wdt *wdt = arg; |
| int err, sts; |
| |
| err = regmap_read(wdt->regmap, wdt->baseaddr + PON_INT_RT_STS, &sts); |
| if (err) |
| return IRQ_HANDLED; |
| |
| if (sts & PMIC_WD_BARK_STS_BIT) |
| watchdog_notify_pretimeout(&wdt->wdev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct watchdog_info pm8916_wdt_ident = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| .identity = "QCOM PM8916 PON WDT", |
| }; |
| |
| static const struct watchdog_info pm8916_wdt_pt_ident = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE | |
| WDIOF_PRETIMEOUT, |
| .identity = "QCOM PM8916 PON WDT", |
| }; |
| |
| static const struct watchdog_ops pm8916_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = pm8916_wdt_start, |
| .stop = pm8916_wdt_stop, |
| .ping = pm8916_wdt_ping, |
| .set_timeout = pm8916_wdt_set_timeout, |
| .set_pretimeout = pm8916_wdt_set_pretimeout, |
| }; |
| |
| static int pm8916_wdt_probe(struct platform_device *pdev) |
| { |
| struct pm8916_wdt *wdt; |
| struct device *parent; |
| int err, irq; |
| |
| wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); |
| if (!wdt) |
| return -ENOMEM; |
| |
| parent = pdev->dev.parent; |
| |
| /* |
| * The pm8916-pon-wdt is a child of the pon device, which is a child |
| * of the pm8916 mfd device. We want access to the pm8916 registers. |
| * Retrieve regmap from pm8916 (parent->parent) and base address |
| * from pm8916-pon (pon). |
| */ |
| wdt->regmap = dev_get_regmap(parent->parent, NULL); |
| if (!wdt->regmap) { |
| dev_err(&pdev->dev, "failed to locate regmap\n"); |
| return -ENODEV; |
| } |
| |
| err = device_property_read_u32(parent, "reg", &wdt->baseaddr); |
| if (err) { |
| dev_err(&pdev->dev, "failed to get pm8916-pon address\n"); |
| return err; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq > 0) { |
| if (devm_request_irq(&pdev->dev, irq, pm8916_wdt_isr, 0, |
| "pm8916_wdt", wdt)) |
| irq = 0; |
| } |
| |
| /* Configure watchdog to hard-reset mode */ |
| err = regmap_write(wdt->regmap, |
| wdt->baseaddr + PON_PMIC_WD_RESET_S2_CTL, |
| RESET_TYPE_HARD); |
| if (err) { |
| dev_err(&pdev->dev, "failed configure watchdog\n"); |
| return err; |
| } |
| |
| wdt->wdev.info = (irq > 0) ? &pm8916_wdt_pt_ident : &pm8916_wdt_ident, |
| wdt->wdev.ops = &pm8916_wdt_ops, |
| wdt->wdev.parent = &pdev->dev; |
| wdt->wdev.min_timeout = PM8916_WDT_MIN_TIMEOUT; |
| wdt->wdev.max_timeout = PM8916_WDT_MAX_TIMEOUT; |
| wdt->wdev.timeout = PM8916_WDT_DEFAULT_TIMEOUT; |
| wdt->wdev.pretimeout = 0; |
| watchdog_set_drvdata(&wdt->wdev, wdt); |
| |
| watchdog_init_timeout(&wdt->wdev, 0, &pdev->dev); |
| pm8916_wdt_configure_timers(&wdt->wdev); |
| |
| return devm_watchdog_register_device(&pdev->dev, &wdt->wdev); |
| } |
| |
| static const struct of_device_id pm8916_wdt_id_table[] = { |
| { .compatible = "qcom,pm8916-wdt" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, pm8916_wdt_id_table); |
| |
| static struct platform_driver pm8916_wdt_driver = { |
| .probe = pm8916_wdt_probe, |
| .driver = { |
| .name = "pm8916-wdt", |
| .of_match_table = of_match_ptr(pm8916_wdt_id_table), |
| }, |
| }; |
| module_platform_driver(pm8916_wdt_driver); |
| |
| MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>"); |
| MODULE_DESCRIPTION("Qualcomm pm8916 watchdog driver"); |
| MODULE_LICENSE("GPL v2"); |