| /* |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Authors: Joonyoung Shim <jy0922.shim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <drm/drmP.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/exynos_drm.h> |
| #include "exynos_drm_drv.h" |
| #include "exynos_drm_crtc.h" |
| #include "exynos_drm_fb.h" |
| #include "exynos_drm_gem.h" |
| #include "exynos_drm_plane.h" |
| |
| /* |
| * This function is to get X or Y size shown via screen. This needs length and |
| * start position of CRTC. |
| * |
| * <--- length ---> |
| * CRTC ---------------- |
| * ^ start ^ end |
| * |
| * There are six cases from a to f. |
| * |
| * <----- SCREEN -----> |
| * 0 last |
| * ----------|------------------|---------- |
| * CRTCs |
| * a ------- |
| * b ------- |
| * c -------------------------- |
| * d -------- |
| * e ------- |
| * f ------- |
| */ |
| static int exynos_plane_get_size(int start, unsigned length, unsigned last) |
| { |
| int end = start + length; |
| int size = 0; |
| |
| if (start <= 0) { |
| if (end > 0) |
| size = min_t(unsigned, end, last); |
| } else if (start <= last) { |
| size = min_t(unsigned, last - start, length); |
| } |
| |
| return size; |
| } |
| |
| static void exynos_plane_mode_set(struct exynos_drm_plane_state *exynos_state) |
| { |
| struct drm_plane_state *state = &exynos_state->base; |
| struct drm_crtc *crtc = state->crtc; |
| struct drm_crtc_state *crtc_state = |
| drm_atomic_get_existing_crtc_state(state->state, crtc); |
| struct drm_display_mode *mode = &crtc_state->adjusted_mode; |
| int crtc_x, crtc_y; |
| unsigned int crtc_w, crtc_h; |
| unsigned int src_x, src_y; |
| unsigned int src_w, src_h; |
| unsigned int actual_w; |
| unsigned int actual_h; |
| |
| /* |
| * The original src/dest coordinates are stored in exynos_state->base, |
| * but we want to keep another copy internal to our driver that we can |
| * clip/modify ourselves. |
| */ |
| |
| crtc_x = state->crtc_x; |
| crtc_y = state->crtc_y; |
| crtc_w = state->crtc_w; |
| crtc_h = state->crtc_h; |
| |
| src_x = state->src_x >> 16; |
| src_y = state->src_y >> 16; |
| src_w = state->src_w >> 16; |
| src_h = state->src_h >> 16; |
| |
| /* set ratio */ |
| exynos_state->h_ratio = (src_w << 16) / crtc_w; |
| exynos_state->v_ratio = (src_h << 16) / crtc_h; |
| |
| /* clip to visible area */ |
| actual_w = exynos_plane_get_size(crtc_x, crtc_w, mode->hdisplay); |
| actual_h = exynos_plane_get_size(crtc_y, crtc_h, mode->vdisplay); |
| |
| if (crtc_x < 0) { |
| if (actual_w) |
| src_x += ((-crtc_x) * exynos_state->h_ratio) >> 16; |
| crtc_x = 0; |
| } |
| |
| if (crtc_y < 0) { |
| if (actual_h) |
| src_y += ((-crtc_y) * exynos_state->v_ratio) >> 16; |
| crtc_y = 0; |
| } |
| |
| /* set drm framebuffer data. */ |
| exynos_state->src.x = src_x; |
| exynos_state->src.y = src_y; |
| exynos_state->src.w = (actual_w * exynos_state->h_ratio) >> 16; |
| exynos_state->src.h = (actual_h * exynos_state->v_ratio) >> 16; |
| |
| /* set plane range to be displayed. */ |
| exynos_state->crtc.x = crtc_x; |
| exynos_state->crtc.y = crtc_y; |
| exynos_state->crtc.w = actual_w; |
| exynos_state->crtc.h = actual_h; |
| |
| DRM_DEBUG_KMS("plane : offset_x/y(%d,%d), width/height(%d,%d)", |
| exynos_state->crtc.x, exynos_state->crtc.y, |
| exynos_state->crtc.w, exynos_state->crtc.h); |
| } |
| |
| static void exynos_drm_plane_reset(struct drm_plane *plane) |
| { |
| struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); |
| struct exynos_drm_plane_state *exynos_state; |
| |
| if (plane->state) { |
| exynos_state = to_exynos_plane_state(plane->state); |
| if (exynos_state->base.fb) |
| drm_framebuffer_unreference(exynos_state->base.fb); |
| kfree(exynos_state); |
| plane->state = NULL; |
| } |
| |
| exynos_state = kzalloc(sizeof(*exynos_state), GFP_KERNEL); |
| if (exynos_state) { |
| exynos_state->zpos = exynos_plane->config->zpos; |
| plane->state = &exynos_state->base; |
| plane->state->plane = plane; |
| } |
| } |
| |
| static struct drm_plane_state * |
| exynos_drm_plane_duplicate_state(struct drm_plane *plane) |
| { |
| struct exynos_drm_plane_state *exynos_state; |
| struct exynos_drm_plane_state *copy; |
| |
| exynos_state = to_exynos_plane_state(plane->state); |
| copy = kzalloc(sizeof(*exynos_state), GFP_KERNEL); |
| if (!copy) |
| return NULL; |
| |
| __drm_atomic_helper_plane_duplicate_state(plane, ©->base); |
| copy->zpos = exynos_state->zpos; |
| return ©->base; |
| } |
| |
| static void exynos_drm_plane_destroy_state(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct exynos_drm_plane_state *old_exynos_state = |
| to_exynos_plane_state(old_state); |
| __drm_atomic_helper_plane_destroy_state(plane, old_state); |
| kfree(old_exynos_state); |
| } |
| |
| static int exynos_drm_plane_atomic_set_property(struct drm_plane *plane, |
| struct drm_plane_state *state, |
| struct drm_property *property, |
| uint64_t val) |
| { |
| struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); |
| struct exynos_drm_plane_state *exynos_state = |
| to_exynos_plane_state(state); |
| struct exynos_drm_private *dev_priv = plane->dev->dev_private; |
| const struct exynos_drm_plane_config *config = exynos_plane->config; |
| |
| if (property == dev_priv->plane_zpos_property && |
| (config->capabilities & EXYNOS_DRM_PLANE_CAP_ZPOS)) |
| exynos_state->zpos = val; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int exynos_drm_plane_atomic_get_property(struct drm_plane *plane, |
| const struct drm_plane_state *state, |
| struct drm_property *property, |
| uint64_t *val) |
| { |
| const struct exynos_drm_plane_state *exynos_state = |
| container_of(state, const struct exynos_drm_plane_state, base); |
| struct exynos_drm_private *dev_priv = plane->dev->dev_private; |
| |
| if (property == dev_priv->plane_zpos_property) |
| *val = exynos_state->zpos; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static struct drm_plane_funcs exynos_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .destroy = drm_plane_cleanup, |
| .set_property = drm_atomic_helper_plane_set_property, |
| .reset = exynos_drm_plane_reset, |
| .atomic_duplicate_state = exynos_drm_plane_duplicate_state, |
| .atomic_destroy_state = exynos_drm_plane_destroy_state, |
| .atomic_set_property = exynos_drm_plane_atomic_set_property, |
| .atomic_get_property = exynos_drm_plane_atomic_get_property, |
| }; |
| |
| static int |
| exynos_drm_plane_check_size(const struct exynos_drm_plane_config *config, |
| struct exynos_drm_plane_state *state) |
| { |
| bool width_ok = false, height_ok = false; |
| |
| if (config->capabilities & EXYNOS_DRM_PLANE_CAP_SCALE) |
| return 0; |
| |
| if (state->src.w == state->crtc.w) |
| width_ok = true; |
| |
| if (state->src.h == state->crtc.h) |
| height_ok = true; |
| |
| if ((config->capabilities & EXYNOS_DRM_PLANE_CAP_DOUBLE) && |
| state->h_ratio == (1 << 15)) |
| width_ok = true; |
| |
| if ((config->capabilities & EXYNOS_DRM_PLANE_CAP_DOUBLE) && |
| state->v_ratio == (1 << 15)) |
| height_ok = true; |
| |
| if (width_ok & height_ok) |
| return 0; |
| |
| DRM_DEBUG_KMS("scaling mode is not supported"); |
| return -ENOTSUPP; |
| } |
| |
| static int exynos_plane_atomic_check(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); |
| struct exynos_drm_plane_state *exynos_state = |
| to_exynos_plane_state(state); |
| int ret = 0; |
| |
| if (!state->crtc || !state->fb) |
| return 0; |
| |
| /* translate state into exynos_state */ |
| exynos_plane_mode_set(exynos_state); |
| |
| ret = exynos_drm_plane_check_size(exynos_plane->config, exynos_state); |
| return ret; |
| } |
| |
| static void exynos_plane_atomic_update(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct drm_plane_state *state = plane->state; |
| struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(state->crtc); |
| struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); |
| |
| if (!state->crtc) |
| return; |
| |
| plane->crtc = state->crtc; |
| exynos_plane->pending_fb = state->fb; |
| |
| if (exynos_crtc->ops->update_plane) |
| exynos_crtc->ops->update_plane(exynos_crtc, exynos_plane); |
| } |
| |
| static void exynos_plane_atomic_disable(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane); |
| struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(old_state->crtc); |
| |
| if (!old_state->crtc) |
| return; |
| |
| if (exynos_crtc->ops->disable_plane) |
| exynos_crtc->ops->disable_plane(exynos_crtc, exynos_plane); |
| } |
| |
| static const struct drm_plane_helper_funcs plane_helper_funcs = { |
| .atomic_check = exynos_plane_atomic_check, |
| .atomic_update = exynos_plane_atomic_update, |
| .atomic_disable = exynos_plane_atomic_disable, |
| }; |
| |
| static void exynos_plane_attach_zpos_property(struct drm_plane *plane, |
| unsigned int zpos) |
| { |
| struct drm_device *dev = plane->dev; |
| struct exynos_drm_private *dev_priv = dev->dev_private; |
| struct drm_property *prop; |
| |
| prop = dev_priv->plane_zpos_property; |
| if (!prop) { |
| prop = drm_property_create_range(dev, 0, "zpos", |
| 0, MAX_PLANE - 1); |
| if (!prop) |
| return; |
| |
| dev_priv->plane_zpos_property = prop; |
| } |
| |
| drm_object_attach_property(&plane->base, prop, zpos); |
| } |
| |
| int exynos_plane_init(struct drm_device *dev, |
| struct exynos_drm_plane *exynos_plane, |
| unsigned int index, unsigned long possible_crtcs, |
| const struct exynos_drm_plane_config *config) |
| { |
| int err; |
| |
| err = drm_universal_plane_init(dev, &exynos_plane->base, |
| possible_crtcs, |
| &exynos_plane_funcs, |
| config->pixel_formats, |
| config->num_pixel_formats, |
| config->type, NULL); |
| if (err) { |
| DRM_ERROR("failed to initialize plane\n"); |
| return err; |
| } |
| |
| drm_plane_helper_add(&exynos_plane->base, &plane_helper_funcs); |
| |
| exynos_plane->index = index; |
| exynos_plane->config = config; |
| |
| exynos_plane_attach_zpos_property(&exynos_plane->base, config->zpos); |
| |
| return 0; |
| } |