| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * MXC6255 - MEMSIC orientation sensing accelerometer |
| * |
| * Copyright (c) 2015, Intel Corporation. |
| * |
| * IIO driver for MXC6255 (7-bit I2C slave address 0x15). |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/iio/iio.h> |
| #include <linux/delay.h> |
| #include <linux/acpi.h> |
| #include <linux/regmap.h> |
| #include <linux/iio/sysfs.h> |
| |
| #define MXC6255_DRV_NAME "mxc6255" |
| #define MXC6255_REGMAP_NAME "mxc6255_regmap" |
| |
| #define MXC6255_REG_XOUT 0x00 |
| #define MXC6255_REG_YOUT 0x01 |
| #define MXC6255_REG_CHIP_ID 0x08 |
| |
| #define MXC6255_CHIP_ID 0x05 |
| |
| /* |
| * MXC6255 has only one measurement range: +/- 2G. |
| * The acceleration output is an 8-bit value. |
| * |
| * Scale is calculated as follows: |
| * (2 + 2) * 9.80665 / (2^8 - 1) = 0.153829 |
| * |
| * Scale value for +/- 2G measurement range |
| */ |
| #define MXC6255_SCALE 153829 |
| |
| enum mxc6255_axis { |
| AXIS_X, |
| AXIS_Y, |
| }; |
| |
| struct mxc6255_data { |
| struct i2c_client *client; |
| struct regmap *regmap; |
| }; |
| |
| static int mxc6255_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct mxc6255_data *data = iio_priv(indio_dev); |
| unsigned int reg; |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = regmap_read(data->regmap, chan->address, ®); |
| if (ret < 0) { |
| dev_err(&data->client->dev, |
| "Error reading reg %lu\n", chan->address); |
| return ret; |
| } |
| |
| *val = sign_extend32(reg, 7); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| *val = 0; |
| *val2 = MXC6255_SCALE; |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info mxc6255_info = { |
| .read_raw = mxc6255_read_raw, |
| }; |
| |
| #define MXC6255_CHANNEL(_axis, reg) { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##_axis, \ |
| .address = reg, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| } |
| |
| static const struct iio_chan_spec mxc6255_channels[] = { |
| MXC6255_CHANNEL(X, MXC6255_REG_XOUT), |
| MXC6255_CHANNEL(Y, MXC6255_REG_YOUT), |
| }; |
| |
| static bool mxc6255_is_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MXC6255_REG_XOUT: |
| case MXC6255_REG_YOUT: |
| case MXC6255_REG_CHIP_ID: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config mxc6255_regmap_config = { |
| .name = MXC6255_REGMAP_NAME, |
| |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .readable_reg = mxc6255_is_readable_reg, |
| }; |
| |
| static int mxc6255_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct mxc6255_data *data; |
| struct iio_dev *indio_dev; |
| struct regmap *regmap; |
| unsigned int chip_id; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| regmap = devm_regmap_init_i2c(client, &mxc6255_regmap_config); |
| if (IS_ERR(regmap)) { |
| dev_err(&client->dev, "Error initializing regmap\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| data->regmap = regmap; |
| |
| indio_dev->name = MXC6255_DRV_NAME; |
| indio_dev->dev.parent = &client->dev; |
| indio_dev->channels = mxc6255_channels; |
| indio_dev->num_channels = ARRAY_SIZE(mxc6255_channels); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->info = &mxc6255_info; |
| |
| ret = regmap_read(data->regmap, MXC6255_REG_CHIP_ID, &chip_id); |
| if (ret < 0) { |
| dev_err(&client->dev, "Error reading chip id %d\n", ret); |
| return ret; |
| } |
| |
| if ((chip_id & 0x1f) != MXC6255_CHIP_ID) { |
| dev_err(&client->dev, "Invalid chip id %x\n", chip_id); |
| return -ENODEV; |
| } |
| |
| dev_dbg(&client->dev, "Chip id %x\n", chip_id); |
| |
| ret = devm_iio_device_register(&client->dev, indio_dev); |
| if (ret < 0) { |
| dev_err(&client->dev, "Could not register IIO device\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct acpi_device_id mxc6255_acpi_match[] = { |
| {"MXC6225", 0}, |
| {"MXC6255", 0}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, mxc6255_acpi_match); |
| |
| static const struct i2c_device_id mxc6255_id[] = { |
| {"mxc6225", 0}, |
| {"mxc6255", 0}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mxc6255_id); |
| |
| static struct i2c_driver mxc6255_driver = { |
| .driver = { |
| .name = MXC6255_DRV_NAME, |
| .acpi_match_table = ACPI_PTR(mxc6255_acpi_match), |
| }, |
| .probe = mxc6255_probe, |
| .id_table = mxc6255_id, |
| }; |
| |
| module_i2c_driver(mxc6255_driver); |
| |
| MODULE_AUTHOR("Teodora Baluta <teodora.baluta@intel.com>"); |
| MODULE_DESCRIPTION("MEMSIC MXC6255 orientation sensing accelerometer driver"); |
| MODULE_LICENSE("GPL v2"); |