| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* ------------------------------------------------------------------------- |
| * Copyright (C) 2014-2016, Intel Corporation |
| * |
| * ------------------------------------------------------------------------- |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/nfc.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <net/nfc/nci_core.h> |
| |
| #include "fdp.h" |
| |
| #define FDP_OTP_PATCH_NAME "otp.bin" |
| #define FDP_RAM_PATCH_NAME "ram.bin" |
| #define FDP_FW_HEADER_SIZE 576 |
| #define FDP_FW_UPDATE_SLEEP 1000 |
| |
| #define NCI_GET_VERSION_TIMEOUT 8000 |
| #define NCI_PATCH_REQUEST_TIMEOUT 8000 |
| #define FDP_PATCH_CONN_DEST 0xC2 |
| #define FDP_PATCH_CONN_PARAM_TYPE 0xA0 |
| |
| #define NCI_PATCH_TYPE_RAM 0x00 |
| #define NCI_PATCH_TYPE_OTP 0x01 |
| #define NCI_PATCH_TYPE_EOT 0xFF |
| |
| #define NCI_PARAM_ID_FW_RAM_VERSION 0xA0 |
| #define NCI_PARAM_ID_FW_OTP_VERSION 0xA1 |
| #define NCI_PARAM_ID_OTP_LIMITED_VERSION 0xC5 |
| #define NCI_PARAM_ID_KEY_INDEX_ID 0xC6 |
| |
| #define NCI_GID_PROP 0x0F |
| #define NCI_OP_PROP_PATCH_OID 0x08 |
| #define NCI_OP_PROP_SET_PDATA_OID 0x23 |
| |
| struct fdp_nci_info { |
| const struct nfc_phy_ops *phy_ops; |
| struct fdp_i2c_phy *phy; |
| struct nci_dev *ndev; |
| |
| const struct firmware *otp_patch; |
| const struct firmware *ram_patch; |
| u32 otp_patch_version; |
| u32 ram_patch_version; |
| |
| u32 otp_version; |
| u32 ram_version; |
| u32 limited_otp_version; |
| u8 key_index; |
| |
| const u8 *fw_vsc_cfg; |
| u8 clock_type; |
| u32 clock_freq; |
| |
| atomic_t data_pkt_counter; |
| void (*data_pkt_counter_cb)(struct nci_dev *ndev); |
| u8 setup_patch_sent; |
| u8 setup_patch_ntf; |
| u8 setup_patch_status; |
| u8 setup_reset_ntf; |
| wait_queue_head_t setup_wq; |
| }; |
| |
| static const u8 nci_core_get_config_otp_ram_version[5] = { |
| 0x04, |
| NCI_PARAM_ID_FW_RAM_VERSION, |
| NCI_PARAM_ID_FW_OTP_VERSION, |
| NCI_PARAM_ID_OTP_LIMITED_VERSION, |
| NCI_PARAM_ID_KEY_INDEX_ID |
| }; |
| |
| struct nci_core_get_config_rsp { |
| u8 status; |
| u8 count; |
| u8 data[]; |
| }; |
| |
| static int fdp_nci_create_conn(struct nci_dev *ndev) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct core_conn_create_dest_spec_params param; |
| int r; |
| |
| /* proprietary destination specific paramerer without value */ |
| param.type = FDP_PATCH_CONN_PARAM_TYPE; |
| param.length = 0x00; |
| |
| r = nci_core_conn_create(info->ndev, FDP_PATCH_CONN_DEST, 1, |
| sizeof(param), ¶m); |
| if (r) |
| return r; |
| |
| return nci_get_conn_info_by_dest_type_params(ndev, |
| FDP_PATCH_CONN_DEST, NULL); |
| } |
| |
| static inline int fdp_nci_get_versions(struct nci_dev *ndev) |
| { |
| return nci_core_cmd(ndev, NCI_OP_CORE_GET_CONFIG_CMD, |
| sizeof(nci_core_get_config_otp_ram_version), |
| (__u8 *) &nci_core_get_config_otp_ram_version); |
| } |
| |
| static inline int fdp_nci_patch_cmd(struct nci_dev *ndev, u8 type) |
| { |
| return nci_prop_cmd(ndev, NCI_OP_PROP_PATCH_OID, sizeof(type), &type); |
| } |
| |
| static inline int fdp_nci_set_production_data(struct nci_dev *ndev, u8 len, |
| const char *data) |
| { |
| return nci_prop_cmd(ndev, NCI_OP_PROP_SET_PDATA_OID, len, data); |
| } |
| |
| static int fdp_nci_set_clock(struct nci_dev *ndev, u8 clock_type, |
| u32 clock_freq) |
| { |
| u32 fc = 13560; |
| u32 nd, num, delta; |
| char data[9]; |
| |
| nd = (24 * fc) / clock_freq; |
| delta = 24 * fc - nd * clock_freq; |
| num = (32768 * delta) / clock_freq; |
| |
| data[0] = 0x00; |
| data[1] = 0x00; |
| data[2] = 0x00; |
| |
| data[3] = 0x10; |
| data[4] = 0x04; |
| data[5] = num & 0xFF; |
| data[6] = (num >> 8) & 0xff; |
| data[7] = nd; |
| data[8] = clock_type; |
| |
| return fdp_nci_set_production_data(ndev, 9, data); |
| } |
| |
| static void fdp_nci_send_patch_cb(struct nci_dev *ndev) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| |
| info->setup_patch_sent = 1; |
| wake_up(&info->setup_wq); |
| } |
| |
| /* |
| * Register a packet sent counter and a callback |
| * |
| * We have no other way of knowing when all firmware packets were sent out |
| * on the i2c bus. We need to know that in order to close the connection and |
| * send the patch end message. |
| */ |
| static void fdp_nci_set_data_pkt_counter(struct nci_dev *ndev, |
| void (*cb)(struct nci_dev *ndev), int count) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| |
| dev_dbg(dev, "NCI data pkt counter %d\n", count); |
| atomic_set(&info->data_pkt_counter, count); |
| info->data_pkt_counter_cb = cb; |
| } |
| |
| /* |
| * The device is expecting a stream of packets. All packets need to |
| * have the PBF flag set to 0x0 (last packet) even if the firmware |
| * file is segmented and there are multiple packets. If we give the |
| * whole firmware to nci_send_data it will segment it and it will set |
| * the PBF flag to 0x01 so we need to do the segmentation here. |
| * |
| * The firmware will be analyzed and applied when we send NCI_OP_PROP_PATCH_CMD |
| * command with NCI_PATCH_TYPE_EOT parameter. The device will send a |
| * NFCC_PATCH_NTF packet and a NCI_OP_CORE_RESET_NTF packet. |
| */ |
| static int fdp_nci_send_patch(struct nci_dev *ndev, u8 conn_id, u8 type) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| const struct firmware *fw; |
| struct sk_buff *skb; |
| unsigned long len; |
| int max_size, payload_size; |
| int rc = 0; |
| |
| if ((type == NCI_PATCH_TYPE_OTP && !info->otp_patch) || |
| (type == NCI_PATCH_TYPE_RAM && !info->ram_patch)) |
| return -EINVAL; |
| |
| if (type == NCI_PATCH_TYPE_OTP) |
| fw = info->otp_patch; |
| else |
| fw = info->ram_patch; |
| |
| max_size = nci_conn_max_data_pkt_payload_size(ndev, conn_id); |
| if (max_size <= 0) |
| return -EINVAL; |
| |
| len = fw->size; |
| |
| fdp_nci_set_data_pkt_counter(ndev, fdp_nci_send_patch_cb, |
| DIV_ROUND_UP(fw->size, max_size)); |
| |
| while (len) { |
| |
| payload_size = min_t(unsigned long, max_size, len); |
| |
| skb = nci_skb_alloc(ndev, (NCI_CTRL_HDR_SIZE + payload_size), |
| GFP_KERNEL); |
| if (!skb) { |
| fdp_nci_set_data_pkt_counter(ndev, NULL, 0); |
| return -ENOMEM; |
| } |
| |
| |
| skb_reserve(skb, NCI_CTRL_HDR_SIZE); |
| |
| skb_put_data(skb, fw->data + (fw->size - len), payload_size); |
| |
| rc = nci_send_data(ndev, conn_id, skb); |
| |
| if (rc) { |
| fdp_nci_set_data_pkt_counter(ndev, NULL, 0); |
| return rc; |
| } |
| |
| len -= payload_size; |
| } |
| |
| return rc; |
| } |
| |
| static int fdp_nci_open(struct nci_dev *ndev) |
| { |
| const struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| |
| return info->phy_ops->enable(info->phy); |
| } |
| |
| static int fdp_nci_close(struct nci_dev *ndev) |
| { |
| return 0; |
| } |
| |
| static int fdp_nci_send(struct nci_dev *ndev, struct sk_buff *skb) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| int ret; |
| |
| if (atomic_dec_and_test(&info->data_pkt_counter)) |
| info->data_pkt_counter_cb(ndev); |
| |
| ret = info->phy_ops->write(info->phy, skb); |
| if (ret < 0) { |
| kfree_skb(skb); |
| return ret; |
| } |
| |
| consume_skb(skb); |
| return 0; |
| } |
| |
| static int fdp_nci_request_firmware(struct nci_dev *ndev) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| const u8 *data; |
| int r; |
| |
| r = request_firmware(&info->ram_patch, FDP_RAM_PATCH_NAME, dev); |
| if (r < 0) { |
| nfc_err(dev, "RAM patch request error\n"); |
| return r; |
| } |
| |
| data = info->ram_patch->data; |
| info->ram_patch_version = |
| data[FDP_FW_HEADER_SIZE] | |
| (data[FDP_FW_HEADER_SIZE + 1] << 8) | |
| (data[FDP_FW_HEADER_SIZE + 2] << 16) | |
| (data[FDP_FW_HEADER_SIZE + 3] << 24); |
| |
| dev_dbg(dev, "RAM patch version: %d, size: %zu\n", |
| info->ram_patch_version, info->ram_patch->size); |
| |
| |
| r = request_firmware(&info->otp_patch, FDP_OTP_PATCH_NAME, dev); |
| if (r < 0) { |
| nfc_err(dev, "OTP patch request error\n"); |
| return 0; |
| } |
| |
| data = (u8 *) info->otp_patch->data; |
| info->otp_patch_version = |
| data[FDP_FW_HEADER_SIZE] | |
| (data[FDP_FW_HEADER_SIZE + 1] << 8) | |
| (data[FDP_FW_HEADER_SIZE+2] << 16) | |
| (data[FDP_FW_HEADER_SIZE+3] << 24); |
| |
| dev_dbg(dev, "OTP patch version: %d, size: %zu\n", |
| info->otp_patch_version, info->otp_patch->size); |
| return 0; |
| } |
| |
| static void fdp_nci_release_firmware(struct nci_dev *ndev) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| |
| if (info->otp_patch) { |
| release_firmware(info->otp_patch); |
| info->otp_patch = NULL; |
| } |
| |
| if (info->ram_patch) { |
| release_firmware(info->ram_patch); |
| info->ram_patch = NULL; |
| } |
| } |
| |
| static int fdp_nci_patch_otp(struct nci_dev *ndev) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| int conn_id; |
| int r = 0; |
| |
| if (info->otp_version >= info->otp_patch_version) |
| return r; |
| |
| info->setup_patch_sent = 0; |
| info->setup_reset_ntf = 0; |
| info->setup_patch_ntf = 0; |
| |
| /* Patch init request */ |
| r = fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_OTP); |
| if (r) |
| return r; |
| |
| /* Patch data connection creation */ |
| conn_id = fdp_nci_create_conn(ndev); |
| if (conn_id < 0) |
| return conn_id; |
| |
| /* Send the patch over the data connection */ |
| r = fdp_nci_send_patch(ndev, conn_id, NCI_PATCH_TYPE_OTP); |
| if (r) |
| return r; |
| |
| /* Wait for all the packets to be send over i2c */ |
| wait_event_interruptible(info->setup_wq, |
| info->setup_patch_sent == 1); |
| |
| /* make sure that the NFCC processed the last data packet */ |
| msleep(FDP_FW_UPDATE_SLEEP); |
| |
| /* Close the data connection */ |
| r = nci_core_conn_close(info->ndev, conn_id); |
| if (r) |
| return r; |
| |
| /* Patch finish message */ |
| if (fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_EOT)) { |
| nfc_err(dev, "OTP patch error 0x%x\n", r); |
| return -EINVAL; |
| } |
| |
| /* If the patch notification didn't arrive yet, wait for it */ |
| wait_event_interruptible(info->setup_wq, info->setup_patch_ntf); |
| |
| /* Check if the patching was successful */ |
| r = info->setup_patch_status; |
| if (r) { |
| nfc_err(dev, "OTP patch error 0x%x\n", r); |
| return -EINVAL; |
| } |
| |
| /* |
| * We need to wait for the reset notification before we |
| * can continue |
| */ |
| wait_event_interruptible(info->setup_wq, info->setup_reset_ntf); |
| |
| return r; |
| } |
| |
| static int fdp_nci_patch_ram(struct nci_dev *ndev) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| int conn_id; |
| int r = 0; |
| |
| if (info->ram_version >= info->ram_patch_version) |
| return r; |
| |
| info->setup_patch_sent = 0; |
| info->setup_reset_ntf = 0; |
| info->setup_patch_ntf = 0; |
| |
| /* Patch init request */ |
| r = fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_RAM); |
| if (r) |
| return r; |
| |
| /* Patch data connection creation */ |
| conn_id = fdp_nci_create_conn(ndev); |
| if (conn_id < 0) |
| return conn_id; |
| |
| /* Send the patch over the data connection */ |
| r = fdp_nci_send_patch(ndev, conn_id, NCI_PATCH_TYPE_RAM); |
| if (r) |
| return r; |
| |
| /* Wait for all the packets to be send over i2c */ |
| wait_event_interruptible(info->setup_wq, |
| info->setup_patch_sent == 1); |
| |
| /* make sure that the NFCC processed the last data packet */ |
| msleep(FDP_FW_UPDATE_SLEEP); |
| |
| /* Close the data connection */ |
| r = nci_core_conn_close(info->ndev, conn_id); |
| if (r) |
| return r; |
| |
| /* Patch finish message */ |
| if (fdp_nci_patch_cmd(ndev, NCI_PATCH_TYPE_EOT)) { |
| nfc_err(dev, "RAM patch error 0x%x\n", r); |
| return -EINVAL; |
| } |
| |
| /* If the patch notification didn't arrive yet, wait for it */ |
| wait_event_interruptible(info->setup_wq, info->setup_patch_ntf); |
| |
| /* Check if the patching was successful */ |
| r = info->setup_patch_status; |
| if (r) { |
| nfc_err(dev, "RAM patch error 0x%x\n", r); |
| return -EINVAL; |
| } |
| |
| /* |
| * We need to wait for the reset notification before we |
| * can continue |
| */ |
| wait_event_interruptible(info->setup_wq, info->setup_reset_ntf); |
| |
| return r; |
| } |
| |
| static int fdp_nci_setup(struct nci_dev *ndev) |
| { |
| /* Format: total length followed by an NCI packet */ |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| int r; |
| u8 patched = 0; |
| |
| r = nci_core_init(ndev); |
| if (r) |
| goto error; |
| |
| /* Get RAM and OTP version */ |
| r = fdp_nci_get_versions(ndev); |
| if (r) |
| goto error; |
| |
| /* Load firmware from disk */ |
| r = fdp_nci_request_firmware(ndev); |
| if (r) |
| goto error; |
| |
| /* Update OTP */ |
| if (info->otp_version < info->otp_patch_version) { |
| r = fdp_nci_patch_otp(ndev); |
| if (r) |
| goto error; |
| patched = 1; |
| } |
| |
| /* Update RAM */ |
| if (info->ram_version < info->ram_patch_version) { |
| r = fdp_nci_patch_ram(ndev); |
| if (r) |
| goto error; |
| patched = 1; |
| } |
| |
| /* Release the firmware buffers */ |
| fdp_nci_release_firmware(ndev); |
| |
| /* If a patch was applied the new version is checked */ |
| if (patched) { |
| r = nci_core_init(ndev); |
| if (r) |
| goto error; |
| |
| r = fdp_nci_get_versions(ndev); |
| if (r) |
| goto error; |
| |
| if (info->otp_version != info->otp_patch_version || |
| info->ram_version != info->ram_patch_version) { |
| nfc_err(dev, "Firmware update failed"); |
| r = -EINVAL; |
| goto error; |
| } |
| } |
| |
| /* |
| * We initialized the devices but the NFC subsystem expects |
| * it to not be initialized. |
| */ |
| return nci_core_reset(ndev); |
| |
| error: |
| fdp_nci_release_firmware(ndev); |
| nfc_err(dev, "Setup error %d\n", r); |
| return r; |
| } |
| |
| static int fdp_nci_post_setup(struct nci_dev *ndev) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| int r; |
| |
| /* Check if the device has VSC */ |
| if (info->fw_vsc_cfg && info->fw_vsc_cfg[0]) { |
| |
| /* Set the vendor specific configuration */ |
| r = fdp_nci_set_production_data(ndev, info->fw_vsc_cfg[3], |
| &info->fw_vsc_cfg[4]); |
| if (r) { |
| nfc_err(dev, "Vendor specific config set error %d\n", |
| r); |
| return r; |
| } |
| } |
| |
| /* Set clock type and frequency */ |
| r = fdp_nci_set_clock(ndev, info->clock_type, info->clock_freq); |
| if (r) { |
| nfc_err(dev, "Clock set error %d\n", r); |
| return r; |
| } |
| |
| /* |
| * In order to apply the VSC FDP needs a reset |
| */ |
| r = nci_core_reset(ndev); |
| if (r) |
| return r; |
| |
| /** |
| * The nci core was initialized when post setup was called |
| * so we leave it like that |
| */ |
| return nci_core_init(ndev); |
| } |
| |
| static int fdp_nci_core_reset_ntf_packet(struct nci_dev *ndev, |
| struct sk_buff *skb) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| |
| info->setup_reset_ntf = 1; |
| wake_up(&info->setup_wq); |
| |
| return 0; |
| } |
| |
| static int fdp_nci_prop_patch_ntf_packet(struct nci_dev *ndev, |
| struct sk_buff *skb) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| |
| info->setup_patch_ntf = 1; |
| info->setup_patch_status = skb->data[0]; |
| wake_up(&info->setup_wq); |
| |
| return 0; |
| } |
| |
| static int fdp_nci_prop_patch_rsp_packet(struct nci_dev *ndev, |
| struct sk_buff *skb) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| u8 status = skb->data[0]; |
| |
| dev_dbg(dev, "%s: status 0x%x\n", __func__, status); |
| nci_req_complete(ndev, status); |
| |
| return 0; |
| } |
| |
| static int fdp_nci_prop_set_production_data_rsp_packet(struct nci_dev *ndev, |
| struct sk_buff *skb) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| u8 status = skb->data[0]; |
| |
| dev_dbg(dev, "%s: status 0x%x\n", __func__, status); |
| nci_req_complete(ndev, status); |
| |
| return 0; |
| } |
| |
| static int fdp_nci_core_get_config_rsp_packet(struct nci_dev *ndev, |
| struct sk_buff *skb) |
| { |
| struct fdp_nci_info *info = nci_get_drvdata(ndev); |
| struct device *dev = &info->phy->i2c_dev->dev; |
| const struct nci_core_get_config_rsp *rsp = (void *) skb->data; |
| unsigned int i; |
| const u8 *p; |
| |
| if (rsp->status == NCI_STATUS_OK) { |
| |
| p = rsp->data; |
| for (i = 0; i < 4; i++) { |
| |
| switch (*p++) { |
| case NCI_PARAM_ID_FW_RAM_VERSION: |
| p++; |
| info->ram_version = le32_to_cpup((__le32 *) p); |
| p += 4; |
| break; |
| case NCI_PARAM_ID_FW_OTP_VERSION: |
| p++; |
| info->otp_version = le32_to_cpup((__le32 *) p); |
| p += 4; |
| break; |
| case NCI_PARAM_ID_OTP_LIMITED_VERSION: |
| p++; |
| info->otp_version = le32_to_cpup((__le32 *) p); |
| p += 4; |
| break; |
| case NCI_PARAM_ID_KEY_INDEX_ID: |
| p++; |
| info->key_index = *p++; |
| } |
| } |
| } |
| |
| dev_dbg(dev, "OTP version %d\n", info->otp_version); |
| dev_dbg(dev, "RAM version %d\n", info->ram_version); |
| dev_dbg(dev, "key index %d\n", info->key_index); |
| dev_dbg(dev, "%s: status 0x%x\n", __func__, rsp->status); |
| |
| nci_req_complete(ndev, rsp->status); |
| |
| return 0; |
| } |
| |
| static const struct nci_driver_ops fdp_core_ops[] = { |
| { |
| .opcode = NCI_OP_CORE_GET_CONFIG_RSP, |
| .rsp = fdp_nci_core_get_config_rsp_packet, |
| }, |
| { |
| .opcode = NCI_OP_CORE_RESET_NTF, |
| .ntf = fdp_nci_core_reset_ntf_packet, |
| }, |
| }; |
| |
| static const struct nci_driver_ops fdp_prop_ops[] = { |
| { |
| .opcode = nci_opcode_pack(NCI_GID_PROP, NCI_OP_PROP_PATCH_OID), |
| .rsp = fdp_nci_prop_patch_rsp_packet, |
| .ntf = fdp_nci_prop_patch_ntf_packet, |
| }, |
| { |
| .opcode = nci_opcode_pack(NCI_GID_PROP, |
| NCI_OP_PROP_SET_PDATA_OID), |
| .rsp = fdp_nci_prop_set_production_data_rsp_packet, |
| }, |
| }; |
| |
| static const struct nci_ops nci_ops = { |
| .open = fdp_nci_open, |
| .close = fdp_nci_close, |
| .send = fdp_nci_send, |
| .setup = fdp_nci_setup, |
| .post_setup = fdp_nci_post_setup, |
| .prop_ops = fdp_prop_ops, |
| .n_prop_ops = ARRAY_SIZE(fdp_prop_ops), |
| .core_ops = fdp_core_ops, |
| .n_core_ops = ARRAY_SIZE(fdp_core_ops), |
| }; |
| |
| int fdp_nci_probe(struct fdp_i2c_phy *phy, const struct nfc_phy_ops *phy_ops, |
| struct nci_dev **ndevp, int tx_headroom, |
| int tx_tailroom, u8 clock_type, u32 clock_freq, |
| const u8 *fw_vsc_cfg) |
| { |
| struct device *dev = &phy->i2c_dev->dev; |
| struct fdp_nci_info *info; |
| struct nci_dev *ndev; |
| u32 protocols; |
| int r; |
| |
| info = devm_kzalloc(dev, sizeof(struct fdp_nci_info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->phy = phy; |
| info->phy_ops = phy_ops; |
| info->clock_type = clock_type; |
| info->clock_freq = clock_freq; |
| info->fw_vsc_cfg = fw_vsc_cfg; |
| |
| init_waitqueue_head(&info->setup_wq); |
| |
| protocols = NFC_PROTO_JEWEL_MASK | |
| NFC_PROTO_MIFARE_MASK | |
| NFC_PROTO_FELICA_MASK | |
| NFC_PROTO_ISO14443_MASK | |
| NFC_PROTO_ISO14443_B_MASK | |
| NFC_PROTO_NFC_DEP_MASK | |
| NFC_PROTO_ISO15693_MASK; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(fdp_prop_ops) > NCI_MAX_PROPRIETARY_CMD); |
| ndev = nci_allocate_device(&nci_ops, protocols, tx_headroom, |
| tx_tailroom); |
| if (!ndev) { |
| nfc_err(dev, "Cannot allocate nfc ndev\n"); |
| return -ENOMEM; |
| } |
| |
| r = nci_register_device(ndev); |
| if (r) |
| goto err_regdev; |
| |
| *ndevp = ndev; |
| info->ndev = ndev; |
| |
| nci_set_drvdata(ndev, info); |
| |
| return 0; |
| |
| err_regdev: |
| nci_free_device(ndev); |
| return r; |
| } |
| EXPORT_SYMBOL(fdp_nci_probe); |
| |
| void fdp_nci_remove(struct nci_dev *ndev) |
| { |
| nci_unregister_device(ndev); |
| nci_free_device(ndev); |
| } |
| EXPORT_SYMBOL(fdp_nci_remove); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("NFC NCI driver for Intel Fields Peak NFC controller"); |
| MODULE_AUTHOR("Robert Dolca <robert.dolca@intel.com>"); |
| |
| MODULE_FIRMWARE(FDP_OTP_PATCH_NAME); |
| MODULE_FIRMWARE(FDP_RAM_PATCH_NAME); |