| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Driver for BCM63xx GPIO unit (pinctrl + GPIO) |
| * |
| * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> |
| * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> |
| */ |
| |
| #include <linux/gpio/regmap.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| |
| #include "pinctrl-bcm63xx.h" |
| |
| #define BCM63XX_BANK_SIZE 4 |
| |
| #define BCM63XX_DIROUT_REG 0x04 |
| #define BCM63XX_DATA_REG 0x0c |
| |
| static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio, |
| unsigned int base, unsigned int offset, |
| unsigned int *reg, unsigned int *mask) |
| { |
| unsigned int line = offset % BCM63XX_BANK_GPIOS; |
| unsigned int stride = offset / BCM63XX_BANK_GPIOS; |
| |
| *reg = base - stride * BCM63XX_BANK_SIZE; |
| *mask = BIT(line); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id bcm63xx_gpio_of_match[] = { |
| { .compatible = "brcm,bcm6318-gpio", }, |
| { .compatible = "brcm,bcm6328-gpio", }, |
| { .compatible = "brcm,bcm6358-gpio", }, |
| { .compatible = "brcm,bcm6362-gpio", }, |
| { .compatible = "brcm,bcm6368-gpio", }, |
| { .compatible = "brcm,bcm63268-gpio", }, |
| { /* sentinel */ } |
| }; |
| |
| static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node, |
| const struct bcm63xx_pinctrl_soc *soc, |
| struct bcm63xx_pinctrl *pc) |
| { |
| struct gpio_regmap_config grc = {0}; |
| |
| grc.parent = dev; |
| grc.fwnode = &node->fwnode; |
| grc.ngpio = soc->ngpios; |
| grc.ngpio_per_reg = BCM63XX_BANK_GPIOS; |
| grc.regmap = pc->regs; |
| grc.reg_dat_base = BCM63XX_DATA_REG; |
| grc.reg_dir_out_base = BCM63XX_DIROUT_REG; |
| grc.reg_set_base = BCM63XX_DATA_REG; |
| grc.reg_mask_xlate = bcm63xx_reg_mask_xlate; |
| |
| return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc)); |
| } |
| |
| int bcm63xx_pinctrl_probe(struct platform_device *pdev, |
| const struct bcm63xx_pinctrl_soc *soc, |
| void *driver_data) |
| { |
| struct device *dev = &pdev->dev; |
| struct bcm63xx_pinctrl *pc; |
| int err; |
| |
| pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); |
| if (!pc) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, pc); |
| |
| pc->dev = dev; |
| pc->driver_data = driver_data; |
| |
| pc->regs = syscon_node_to_regmap(dev->parent->of_node); |
| if (IS_ERR(pc->regs)) |
| return PTR_ERR(pc->regs); |
| |
| pc->pctl_desc.name = dev_name(dev); |
| pc->pctl_desc.pins = soc->pins; |
| pc->pctl_desc.npins = soc->npins; |
| pc->pctl_desc.pctlops = soc->pctl_ops; |
| pc->pctl_desc.pmxops = soc->pmx_ops; |
| pc->pctl_desc.owner = THIS_MODULE; |
| |
| pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc); |
| if (IS_ERR(pc->pctl_dev)) |
| return PTR_ERR(pc->pctl_dev); |
| |
| for_each_child_of_node_scoped(dev->parent->of_node, node) { |
| if (of_match_node(bcm63xx_gpio_of_match, node)) { |
| err = bcm63xx_gpio_probe(dev, node, soc, pc); |
| if (err) { |
| dev_err(dev, "could not add GPIO chip\n"); |
| return err; |
| } |
| } |
| } |
| |
| return 0; |
| } |