| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Intel x86 Platform Specific Drivers |
| # |
| |
| source "drivers/platform/x86/intel/atomisp2/Kconfig" |
| source "drivers/platform/x86/intel/ifs/Kconfig" |
| source "drivers/platform/x86/intel/int1092/Kconfig" |
| source "drivers/platform/x86/intel/int3472/Kconfig" |
| source "drivers/platform/x86/intel/pmc/Kconfig" |
| source "drivers/platform/x86/intel/pmt/Kconfig" |
| source "drivers/platform/x86/intel/speed_select_if/Kconfig" |
| source "drivers/platform/x86/intel/telemetry/Kconfig" |
| source "drivers/platform/x86/intel/wmi/Kconfig" |
| source "drivers/platform/x86/intel/uncore-frequency/Kconfig" |
| |
| |
| config INTEL_HID_EVENT |
| tristate "Intel HID Event" |
| depends on ACPI |
| depends on INPUT |
| depends on I2C |
| select INPUT_SPARSEKMAP |
| help |
| This driver provides support for the Intel HID Event hotkey interface. |
| Some laptops require this driver for hotkey support. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_hid. |
| |
| config INTEL_VBTN |
| tristate "Intel Virtual Button" |
| depends on ACPI |
| depends on INPUT |
| depends on I2C |
| select INPUT_SPARSEKMAP |
| help |
| This driver provides support for the Intel Virtual Button interface. |
| Some laptops require this driver for power button support. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_vbtn. |
| |
| config INTEL_INT0002_VGPIO |
| tristate "Intel ACPI INT0002 Virtual GPIO driver" |
| depends on GPIOLIB && ACPI && PM_SLEEP |
| select GPIOLIB_IRQCHIP |
| help |
| Some peripherals on Bay Trail and Cherry Trail platforms signal a |
| Power Management Event (PME) to the Power Management Controller (PMC) |
| to wakeup the system. When this happens software needs to explicitly |
| clear the PME bus 0 status bit in the GPE0a_STS register to avoid an |
| IRQ storm on IRQ 9. |
| |
| This is modelled in ACPI through the INT0002 ACPI device, which is |
| called a "Virtual GPIO controller" in ACPI because it defines the |
| event handler to call when the PME triggers through _AEI and _L02 |
| methods as would be done for a real GPIO interrupt in ACPI. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_int0002_vgpio. |
| |
| config INTEL_OAKTRAIL |
| tristate "Intel Oaktrail Platform Extras" |
| depends on ACPI |
| depends on ACPI_VIDEO || ACPI_VIDEO=n |
| depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI |
| help |
| Intel Oaktrail platform need this driver to provide interfaces to |
| enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y |
| here; it will only load on supported platforms. |
| |
| config INTEL_BXTWC_PMIC_TMU |
| tristate "Intel Broxton Whiskey Cove TMU Driver" |
| depends on INTEL_SOC_PMIC_BXTWC |
| depends on MFD_INTEL_PMC_BXT |
| select REGMAP |
| help |
| Select this driver to use Intel Broxton Whiskey Cove PMIC TMU feature. |
| This driver enables the alarm wakeup functionality in the TMU unit of |
| Whiskey Cove PMIC. |
| |
| config INTEL_BYTCRC_PWRSRC |
| tristate "Intel Bay Trail Crystal Cove power source driver" |
| depends on INTEL_SOC_PMIC |
| help |
| This option adds a power source driver for Crystal Cove PMICs |
| on Intel Bay Trail devices. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_bytcrc_pwrsrc. |
| |
| config INTEL_CHTDC_TI_PWRBTN |
| tristate "Intel Cherry Trail Dollar Cove TI power button driver" |
| depends on INTEL_SOC_PMIC_CHTDC_TI |
| depends on INPUT |
| help |
| This option adds a power button driver for Dollar Cove TI |
| PMIC on Intel Cherry Trail devices. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_chtdc_ti_pwrbtn. |
| |
| config INTEL_CHTWC_INT33FE |
| tristate "Intel Cherry Trail Whiskey Cove ACPI INT33FE Driver" |
| depends on X86 && ACPI && I2C && REGULATOR |
| depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m) |
| depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m) |
| depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m) |
| help |
| This driver add support for the Intel Cherry Trail Whiskey Cove |
| INT33FE ACPI device found on the GPD win and the GPD pocket. |
| |
| The INT33FE ACPI device on these mini laptops contains I2cSerialBusV2 |
| resources for a MAX17042 Fuel Gauge, FUSB302 USB Type-C Controller |
| and PI3USB30532 USB switch. |
| This driver instantiates i2c-clients for these, so that standard |
| i2c drivers for these chips can bind to the them. |
| |
| If you enable this driver it is advised to also select |
| CONFIG_TYPEC_FUSB302=m, CONFIG_TYPEC_MUX_PI3USB30532=m and |
| CONFIG_BATTERY_MAX17042=m. |
| |
| config INTEL_ISHTP_ECLITE |
| tristate "Intel ISHTP eclite controller Driver" |
| depends on INTEL_ISH_HID |
| depends on ACPI |
| help |
| This driver is for accessing the PSE (Programmable Service Engine) - |
| an Embedded Controller like IP - using ISHTP (Integrated Sensor Hub |
| Transport Protocol) to get battery, thermal and UCSI (USB Type-C |
| Connector System Software Interface) related data from the platform. |
| Users who don't want to use discrete Embedded Controller on Intel's |
| Elkhartlake platform can leverage this integrated solution of |
| ECLite which is part of PSE subsystem. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_ishtp_eclite. |
| |
| config INTEL_MRFLD_PWRBTN |
| tristate "Intel Merrifield Basin Cove power button driver" |
| depends on INTEL_SOC_PMIC_MRFLD |
| depends on INPUT |
| help |
| This option adds a power button driver for Basin Cove PMIC |
| on Intel Merrifield devices. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called intel_mrfld_pwrbtn. |
| |
| config INTEL_PUNIT_IPC |
| tristate "Intel P-Unit IPC Driver" |
| help |
| This driver provides support for Intel P-Unit Mailbox IPC mechanism, |
| which is used to bridge the communications between kernel and P-Unit. |
| |
| config INTEL_RST |
| tristate "Intel Rapid Start Technology Driver" |
| depends on ACPI |
| help |
| This driver provides support for modifying parameters on systems |
| equipped with Intel's Rapid Start Technology. When put in an ACPI |
| sleep state, these devices will wake after either a configured |
| timeout or when the system battery reaches a critical state, |
| automatically copying memory contents to disk. On resume, the |
| firmware will copy the memory contents back to RAM and resume the OS |
| as usual. |
| |
| config INTEL_SDSI |
| tristate "Intel On Demand (Software Defined Silicon) Driver" |
| depends on INTEL_VSEC |
| depends on X86_64 |
| help |
| This driver enables access to the Intel On Demand (formerly Software |
| Defined Silicon) interface used to provision silicon features with an |
| authentication certificate and capability license. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_sdsi. |
| |
| config INTEL_SMARTCONNECT |
| tristate "Intel Smart Connect disabling driver" |
| depends on ACPI |
| help |
| Intel Smart Connect is a technology intended to permit devices to |
| update state by resuming for a short period of time at regular |
| intervals. If a user enables this functionality under Windows and |
| then reboots into Linux, the system may remain configured to resume |
| on suspend. In the absence of any userspace to support it, the system |
| will then remain awake until something triggers another suspend. |
| |
| This driver checks to determine whether the device has Intel Smart |
| Connect enabled, and if so disables it. |
| |
| config INTEL_TPMI_POWER_DOMAINS |
| tristate |
| |
| config INTEL_TPMI |
| tristate "Intel Topology Aware Register and PM Capsule Interface (TPMI)" |
| depends on INTEL_VSEC |
| depends on X86_64 |
| select INTEL_TPMI_POWER_DOMAINS |
| help |
| The Intel Topology Aware Register and PM Capsule Interface (TPMI), |
| provides enumerable MMIO interface for power management features. |
| This driver creates devices, so that other PM feature driver can |
| be loaded for PM specific feature operation. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_vsec_tpmi. |
| |
| config INTEL_PLR_TPMI |
| tristate "Intel SoC TPMI Power Limit Reasons driver" |
| depends on INTEL_TPMI |
| help |
| This driver provides the TPMI power limit reasons status information |
| via debugfs files. |
| |
| config INTEL_TURBO_MAX_3 |
| bool "Intel Turbo Boost Max Technology 3.0 enumeration driver" |
| depends on X86_64 && SCHED_MC_PRIO |
| help |
| This driver reads maximum performance ratio of each CPU and set up |
| the scheduler priority metrics. In this way scheduler can prefer |
| CPU with higher performance to schedule tasks. |
| |
| This driver is only required when the system is not using Hardware |
| P-States (HWP). In HWP mode, priority can be read from ACPI tables. |
| |
| config INTEL_VSEC |
| tristate "Intel Vendor Specific Extended Capabilities Driver" |
| depends on PCI |
| select AUXILIARY_BUS |
| help |
| Adds support for feature drivers exposed using Intel PCIe VSEC and |
| DVSEC. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called intel_vsec. |
