drivers/soc/samsung/exynos-pmu.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 //
 // Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
 //		http://www.samsung.com/
 //
 // Exynos - CPU PMU(Power Management Unit) support

 #include <linux/arm-smccc.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>

 #include <linux/soc/samsung/exynos-regs-pmu.h>
 #include <linux/soc/samsung/exynos-pmu.h>

 #include "exynos-pmu.h"

 #define PMUALIVE_MASK			GENMASK(13, 0)
 #define TENSOR_SET_BITS			(BIT(15) | BIT(14))
 #define TENSOR_CLR_BITS			BIT(15)
 #define TENSOR_SMC_PMU_SEC_REG		0x82000504
 #define TENSOR_PMUREG_READ		0
 #define TENSOR_PMUREG_WRITE		1
 #define TENSOR_PMUREG_RMW		2

 struct exynos_pmu_context {
 	struct device *dev;
 	const struct exynos_pmu_data *pmu_data;
 	struct regmap *pmureg;
 };

 void __iomem *pmu_base_addr;
 static struct exynos_pmu_context *pmu_context;
 /* forward declaration */
 static struct platform_driver exynos_pmu_driver;

 /*
  * Tensor SoCs are configured so that PMU_ALIVE registers can only be written
  * from EL3, but are still read accessible. As Linux needs to write some of
  * these registers, the following functions are provided and exposed via
  * regmap.
  *
  * Note: This SMC interface is known to be implemented on gs101 and derivative
  * SoCs.
  */

 /* Write to a protected PMU register. */
 static int tensor_sec_reg_write(void *context, unsigned int reg,
 				unsigned int val)
 {
 	struct arm_smccc_res res;
 	unsigned long pmu_base = (unsigned long)context;

 	arm_smccc_smc(TENSOR_SMC_PMU_SEC_REG, pmu_base + reg,
 		      TENSOR_PMUREG_WRITE, val, 0, 0, 0, 0, &res);

 	/* returns -EINVAL if access isn't allowed or 0 */
 	if (res.a0)
 		pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);

 	return (int)res.a0;
 }

 /* Read/Modify/Write a protected PMU register. */
 static int tensor_sec_reg_rmw(void *context, unsigned int reg,
 			      unsigned int mask, unsigned int val)
 {
 	struct arm_smccc_res res;
 	unsigned long pmu_base = (unsigned long)context;

 	arm_smccc_smc(TENSOR_SMC_PMU_SEC_REG, pmu_base + reg,
 		      TENSOR_PMUREG_RMW, mask, val, 0, 0, 0, &res);

 	/* returns -EINVAL if access isn't allowed or 0 */
 	if (res.a0)
 		pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);

 	return (int)res.a0;
 }

 /*
  * Read a protected PMU register. All PMU registers can be read by Linux.
  * Note: The SMC read register is not used, as only registers that can be
  * written are readable via SMC.
  */
 static int tensor_sec_reg_read(void *context, unsigned int reg,
 			       unsigned int *val)
 {
 	*val = pmu_raw_readl(reg);
 	return 0;
 }

 /*
  * For SoCs that have set/clear bit hardware this function can be used when
  * the PMU register will be accessed by multiple masters.
  *
  * For example, to set bits 13:8 in PMU reg offset 0x3e80
  * tensor_set_bits_atomic(ctx, 0x3e80, 0x3f00, 0x3f00);
  *
  * Set bit 8, and clear bits 13:9 PMU reg offset 0x3e80
  * tensor_set_bits_atomic(0x3e80, 0x100, 0x3f00);
  */
 static int tensor_set_bits_atomic(void *ctx, unsigned int offset, u32 val,
 				  u32 mask)
 {
 	int ret;
 	unsigned int i;

 	for (i = 0; i < 32; i++) {
 		if (!(mask & BIT(i)))
 			continue;

 		offset &= ~TENSOR_SET_BITS;

 		if (val & BIT(i))
 			offset |= TENSOR_SET_BITS;
 		else
 			offset |= TENSOR_CLR_BITS;

 		ret = tensor_sec_reg_write(ctx, offset, i);
 		if (ret)
 			return ret;
 	}
 	return ret;
 }

 static bool tensor_is_atomic(unsigned int reg)
 {
 	/*
 	 * Use atomic operations for PMU_ALIVE registers (offset 0~0x3FFF)
 	 * as the target registers can be accessed by multiple masters. SFRs
 	 * that don't support atomic are added to the switch statement below.
 	 */
 	if (reg > PMUALIVE_MASK)
 		return false;

 	switch (reg) {
 	case GS101_SYSIP_DAT0:
 	case GS101_SYSTEM_CONFIGURATION:
 		return false;
 	default:
 		return true;
 	}
 }

 static int tensor_sec_update_bits(void *ctx, unsigned int reg,
 				  unsigned int mask, unsigned int val)
 {

 	if (!tensor_is_atomic(reg))
 		return tensor_sec_reg_rmw(ctx, reg, mask, val);

 	return tensor_set_bits_atomic(ctx, reg, val, mask);
 }

 void pmu_raw_writel(u32 val, u32 offset)
 {
 	writel_relaxed(val, pmu_base_addr + offset);
 }

 u32 pmu_raw_readl(u32 offset)
 {
 	return readl_relaxed(pmu_base_addr + offset);
 }

 void exynos_sys_powerdown_conf(enum sys_powerdown mode)
 {
 	unsigned int i;
 	const struct exynos_pmu_data *pmu_data;

 	if (!pmu_context || !pmu_context->pmu_data)
 		return;

 	pmu_data = pmu_context->pmu_data;

 	if (pmu_data->powerdown_conf)
 		pmu_data->powerdown_conf(mode);

 	if (pmu_data->pmu_config) {
 		for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
 			pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
 					pmu_data->pmu_config[i].offset);
 	}

 	if (pmu_data->powerdown_conf_extra)
 		pmu_data->powerdown_conf_extra(mode);

 	if (pmu_data->pmu_config_extra) {
 		for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
 			pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
 				       pmu_data->pmu_config_extra[i].offset);
 	}
 }

 /*
  * Split the data between ARM architectures because it is relatively big
  * and useless on other arch.
  */
 #ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
 #define exynos_pmu_data_arm_ptr(data)	(&data)
 #else
 #define exynos_pmu_data_arm_ptr(data)	NULL
 #endif

 static const struct regmap_config regmap_smccfg = {
 	.name = "pmu_regs",
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
 	.fast_io = true,
 	.use_single_read = true,
 	.use_single_write = true,
 	.reg_read = tensor_sec_reg_read,
 	.reg_write = tensor_sec_reg_write,
 	.reg_update_bits = tensor_sec_update_bits,
 };

 static const struct exynos_pmu_data gs101_pmu_data = {
 	.pmu_secure = true
 };

 /*
  * PMU platform driver and devicetree bindings.
  */
 static const struct of_device_id exynos_pmu_of_device_ids[] = {
 	{
 		.compatible = "google,gs101-pmu",
 		.data = &gs101_pmu_data,
 	}, {
 		.compatible = "samsung,exynos3250-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data),
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
 	}, {
 		.compatible = "samsung,exynos4212-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
 	}, {
 		.compatible = "samsung,exynos5250-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data),
 	}, {
 		.compatible = "samsung,exynos5410-pmu",
 	}, {
 		.compatible = "samsung,exynos5420-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
 	}, {
 		.compatible = "samsung,exynos5433-pmu",
 	}, {
 		.compatible = "samsung,exynos7-pmu",
 	}, {
 		.compatible = "samsung,exynos850-pmu",
 	},
 	{ /*sentinel*/ },
 };

 static const struct mfd_cell exynos_pmu_devs[] = {
 	{ .name = "exynos-clkout", },
 };

 /**
  * exynos_get_pmu_regmap() - Obtain pmureg regmap
  *
  * Find the pmureg regmap previously configured in probe() and return regmap
  * pointer.
  *
  * Return: A pointer to regmap if found or ERR_PTR error value.
  */
 struct regmap *exynos_get_pmu_regmap(void)
 {
 	struct device_node *np = of_find_matching_node(NULL,
 						      exynos_pmu_of_device_ids);
 	if (np)
 		return exynos_get_pmu_regmap_by_phandle(np, NULL);
 	return ERR_PTR(-ENODEV);
 }
 EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap);

 /**
  * exynos_get_pmu_regmap_by_phandle() - Obtain pmureg regmap via phandle
  * @np: Device node holding PMU phandle property
  * @propname: Name of property holding phandle value
  *
  * Find the pmureg regmap previously configured in probe() and return regmap
  * pointer.
  *
  * Return: A pointer to regmap if found or ERR_PTR error value.
  */
 struct regmap *exynos_get_pmu_regmap_by_phandle(struct device_node *np,
 						const char *propname)
 {
 	struct device_node *pmu_np;
 	struct device *dev;

 	if (propname)
 		pmu_np = of_parse_phandle(np, propname, 0);
 	else
 		pmu_np = np;

 	if (!pmu_np)
 		return ERR_PTR(-ENODEV);

 	/*
 	 * Determine if exynos-pmu device has probed and therefore regmap
 	 * has been created and can be returned to the caller. Otherwise we
 	 * return -EPROBE_DEFER.
 	 */
 	dev = driver_find_device_by_of_node(&exynos_pmu_driver.driver,
 					    (void *)pmu_np);

 	if (propname)
 		of_node_put(pmu_np);

 	if (!dev)
 		return ERR_PTR(-EPROBE_DEFER);

 	return syscon_node_to_regmap(pmu_np);
 }
 EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap_by_phandle);

 static int exynos_pmu_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct regmap_config pmu_regmcfg;
 	struct regmap *regmap;
 	struct resource *res;
 	int ret;

 	pmu_base_addr = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pmu_base_addr))
 		return PTR_ERR(pmu_base_addr);

 	pmu_context = devm_kzalloc(&pdev->dev,
 			sizeof(struct exynos_pmu_context),
 			GFP_KERNEL);
 	if (!pmu_context)
 		return -ENOMEM;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENODEV;

 	pmu_context->pmu_data = of_device_get_match_data(dev);

 	/* For SoCs that secure PMU register writes use custom regmap */
 	if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_secure) {
 		pmu_regmcfg = regmap_smccfg;
 		pmu_regmcfg.max_register = resource_size(res) -
 					   pmu_regmcfg.reg_stride;
 		/* Need physical address for SMC call */
 		regmap = devm_regmap_init(dev, NULL,
 					  (void *)(uintptr_t)res->start,
 					  &pmu_regmcfg);

 		if (IS_ERR(regmap))
 			return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
 					     "regmap init failed\n");

 		ret = of_syscon_register_regmap(dev->of_node, regmap);
 		if (ret)
 			return ret;
 	} else {
 		/* let syscon create mmio regmap */
 		regmap = syscon_node_to_regmap(dev->of_node);
 		if (IS_ERR(regmap))
 			return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
 					     "syscon_node_to_regmap failed\n");
 	}

 	pmu_context->pmureg = regmap;
 	pmu_context->dev = dev;

 	if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_init)
 		pmu_context->pmu_data->pmu_init();

 	platform_set_drvdata(pdev, pmu_context);

 	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, exynos_pmu_devs,
 				   ARRAY_SIZE(exynos_pmu_devs), NULL, 0, NULL);
 	if (ret)
 		return ret;

 	if (devm_of_platform_populate(dev))
 		dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n");

 	dev_dbg(dev, "Exynos PMU Driver probe done\n");
 	return 0;
 }

 static struct platform_driver exynos_pmu_driver = {
 	.driver  = {
 		.name   = "exynos-pmu",
 		.of_match_table = exynos_pmu_of_device_ids,
 	},
 	.probe = exynos_pmu_probe,
 };

 static int __init exynos_pmu_init(void)
 {
 	return platform_driver_register(&exynos_pmu_driver);

 }
 postcore_initcall(exynos_pmu_init);
	// SPDX-License-Identifier: GPL-2.0
	//
	// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
	// http://www.samsung.com/
	//
	// Exynos - CPU PMU(Power Management Unit) support

	#include <linux/arm-smccc.h>
	#include <linux/of.h>
	#include <linux/of_address.h>
	#include <linux/mfd/core.h>
	#include <linux/mfd/syscon.h>
	#include <linux/of_platform.h>
	#include <linux/platform_device.h>
	#include <linux/delay.h>
	#include <linux/regmap.h>

	#include <linux/soc/samsung/exynos-regs-pmu.h>
	#include <linux/soc/samsung/exynos-pmu.h>

	#include "exynos-pmu.h"

	#define PMUALIVE_MASK GENMASK(13, 0)
	#define TENSOR_SET_BITS (BIT(15) \| BIT(14))
	#define TENSOR_CLR_BITS BIT(15)
	#define TENSOR_SMC_PMU_SEC_REG 0x82000504
	#define TENSOR_PMUREG_READ 0
	#define TENSOR_PMUREG_WRITE 1
	#define TENSOR_PMUREG_RMW 2

	struct exynos_pmu_context {
	struct device *dev;
	const struct exynos_pmu_data *pmu_data;
	struct regmap *pmureg;
	};

	void __iomem *pmu_base_addr;
	static struct exynos_pmu_context *pmu_context;
	/* forward declaration */
	static struct platform_driver exynos_pmu_driver;

	/*
	* Tensor SoCs are configured so that PMU_ALIVE registers can only be written
	* from EL3, but are still read accessible. As Linux needs to write some of
	* these registers, the following functions are provided and exposed via
	* regmap.
	*
	* Note: This SMC interface is known to be implemented on gs101 and derivative
	* SoCs.
	*/

	/* Write to a protected PMU register. */
	static int tensor_sec_reg_write(void *context, unsigned int reg,
	unsigned int val)
	{
	struct arm_smccc_res res;
	unsigned long pmu_base = (unsigned long)context;

	arm_smccc_smc(TENSOR_SMC_PMU_SEC_REG, pmu_base + reg,
	TENSOR_PMUREG_WRITE, val, 0, 0, 0, 0, &res);

	/* returns -EINVAL if access isn't allowed or 0 */
	if (res.a0)
	pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);

	return (int)res.a0;
	}

	/* Read/Modify/Write a protected PMU register. */
	static int tensor_sec_reg_rmw(void *context, unsigned int reg,
	unsigned int mask, unsigned int val)
	{
	struct arm_smccc_res res;
	unsigned long pmu_base = (unsigned long)context;

	arm_smccc_smc(TENSOR_SMC_PMU_SEC_REG, pmu_base + reg,
	TENSOR_PMUREG_RMW, mask, val, 0, 0, 0, &res);

	/* returns -EINVAL if access isn't allowed or 0 */
	if (res.a0)
	pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);

	return (int)res.a0;
	}

	/*
	* Read a protected PMU register. All PMU registers can be read by Linux.
	* Note: The SMC read register is not used, as only registers that can be
	* written are readable via SMC.
	*/
	static int tensor_sec_reg_read(void *context, unsigned int reg,
	unsigned int *val)
	{
	*val = pmu_raw_readl(reg);
	return 0;
	}

	/*
	* For SoCs that have set/clear bit hardware this function can be used when
	* the PMU register will be accessed by multiple masters.
	*
	* For example, to set bits 13:8 in PMU reg offset 0x3e80
	* tensor_set_bits_atomic(ctx, 0x3e80, 0x3f00, 0x3f00);
	*
	* Set bit 8, and clear bits 13:9 PMU reg offset 0x3e80
	* tensor_set_bits_atomic(0x3e80, 0x100, 0x3f00);
	*/
	static int tensor_set_bits_atomic(void *ctx, unsigned int offset, u32 val,
	u32 mask)
	{
	int ret;
	unsigned int i;

	for (i = 0; i < 32; i++) {
	if (!(mask & BIT(i)))
	continue;

	offset &= ~TENSOR_SET_BITS;

	if (val & BIT(i))
	offset \|= TENSOR_SET_BITS;
	else
	offset \|= TENSOR_CLR_BITS;

	ret = tensor_sec_reg_write(ctx, offset, i);
	if (ret)
	return ret;
	}
	return ret;
	}

	static bool tensor_is_atomic(unsigned int reg)
	{
	/*
	* Use atomic operations for PMU_ALIVE registers (offset 0~0x3FFF)
	* as the target registers can be accessed by multiple masters. SFRs
	* that don't support atomic are added to the switch statement below.
	*/
	if (reg > PMUALIVE_MASK)
	return false;

	switch (reg) {
	case GS101_SYSIP_DAT0:
	case GS101_SYSTEM_CONFIGURATION:
	return false;
	default:
	return true;
	}
	}

	static int tensor_sec_update_bits(void *ctx, unsigned int reg,
	unsigned int mask, unsigned int val)
	{

	if (!tensor_is_atomic(reg))
	return tensor_sec_reg_rmw(ctx, reg, mask, val);

	return tensor_set_bits_atomic(ctx, reg, val, mask);
	}

	void pmu_raw_writel(u32 val, u32 offset)
	{
	writel_relaxed(val, pmu_base_addr + offset);
	}

	u32 pmu_raw_readl(u32 offset)
	{
	return readl_relaxed(pmu_base_addr + offset);
	}

	void exynos_sys_powerdown_conf(enum sys_powerdown mode)
	{
	unsigned int i;
	const struct exynos_pmu_data *pmu_data;

	if (!pmu_context \|\| !pmu_context->pmu_data)
	return;

	pmu_data = pmu_context->pmu_data;

	if (pmu_data->powerdown_conf)
	pmu_data->powerdown_conf(mode);

	if (pmu_data->pmu_config) {
	for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
	pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
	pmu_data->pmu_config[i].offset);
	}

	if (pmu_data->powerdown_conf_extra)
	pmu_data->powerdown_conf_extra(mode);

	if (pmu_data->pmu_config_extra) {
	for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
	pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
	pmu_data->pmu_config_extra[i].offset);
	}
	}

	/*
	* Split the data between ARM architectures because it is relatively big
	* and useless on other arch.
	*/
	#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
	#define exynos_pmu_data_arm_ptr(data) (&data)
	#else
	#define exynos_pmu_data_arm_ptr(data) NULL
	#endif

	static const struct regmap_config regmap_smccfg = {
	.name = "pmu_regs",
	.reg_bits = 32,
	.reg_stride = 4,
	.val_bits = 32,
	.fast_io = true,
	.use_single_read = true,
	.use_single_write = true,
	.reg_read = tensor_sec_reg_read,
	.reg_write = tensor_sec_reg_write,
	.reg_update_bits = tensor_sec_update_bits,
	};

	static const struct exynos_pmu_data gs101_pmu_data = {
	.pmu_secure = true
	};

	/*
	* PMU platform driver and devicetree bindings.
	*/
	static const struct of_device_id exynos_pmu_of_device_ids[] = {
	{
	.compatible = "google,gs101-pmu",
	.data = &gs101_pmu_data,
	}, {
	.compatible = "samsung,exynos3250-pmu",
	.data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data),
	}, {
	.compatible = "samsung,exynos4210-pmu",
	.data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
	}, {
	.compatible = "samsung,exynos4212-pmu",
	.data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
	}, {
	.compatible = "samsung,exynos4412-pmu",
	.data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
	}, {
	.compatible = "samsung,exynos5250-pmu",
	.data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data),
	}, {
	.compatible = "samsung,exynos5410-pmu",
	}, {
	.compatible = "samsung,exynos5420-pmu",
	.data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
	}, {
	.compatible = "samsung,exynos5433-pmu",
	}, {
	.compatible = "samsung,exynos7-pmu",
	}, {
	.compatible = "samsung,exynos850-pmu",
	},
	{ /sentinel/ },
	};

	static const struct mfd_cell exynos_pmu_devs[] = {
	{ .name = "exynos-clkout", },
	};

	/**
	* exynos_get_pmu_regmap() - Obtain pmureg regmap
	*
	* Find the pmureg regmap previously configured in probe() and return regmap
	* pointer.
	*
	* Return: A pointer to regmap if found or ERR_PTR error value.
	*/
	struct regmap *exynos_get_pmu_regmap(void)
	{
	struct device_node *np = of_find_matching_node(NULL,
	exynos_pmu_of_device_ids);
	if (np)
	return exynos_get_pmu_regmap_by_phandle(np, NULL);
	return ERR_PTR(-ENODEV);
	}
	EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap);

	/**
	* exynos_get_pmu_regmap_by_phandle() - Obtain pmureg regmap via phandle
	* @np: Device node holding PMU phandle property
	* @propname: Name of property holding phandle value
	*
	* Find the pmureg regmap previously configured in probe() and return regmap
	* pointer.
	*
	* Return: A pointer to regmap if found or ERR_PTR error value.
	*/
	struct regmap exynos_get_pmu_regmap_by_phandle(struct device_node np,
	const char *propname)
	{
	struct device_node *pmu_np;
	struct device *dev;

	if (propname)
	pmu_np = of_parse_phandle(np, propname, 0);
	else
	pmu_np = np;

	if (!pmu_np)
	return ERR_PTR(-ENODEV);

	/*
	* Determine if exynos-pmu device has probed and therefore regmap
	* has been created and can be returned to the caller. Otherwise we
	* return -EPROBE_DEFER.
	*/
	dev = driver_find_device_by_of_node(&exynos_pmu_driver.driver,
	(void *)pmu_np);

	if (propname)
	of_node_put(pmu_np);

	if (!dev)
	return ERR_PTR(-EPROBE_DEFER);

	return syscon_node_to_regmap(pmu_np);
	}
	EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap_by_phandle);

	static int exynos_pmu_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct regmap_config pmu_regmcfg;
	struct regmap *regmap;
	struct resource *res;
	int ret;

	pmu_base_addr = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(pmu_base_addr))
	return PTR_ERR(pmu_base_addr);

	pmu_context = devm_kzalloc(&pdev->dev,
	sizeof(struct exynos_pmu_context),
	GFP_KERNEL);
	if (!pmu_context)
	return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
	return -ENODEV;

	pmu_context->pmu_data = of_device_get_match_data(dev);

	/* For SoCs that secure PMU register writes use custom regmap */
	if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_secure) {
	pmu_regmcfg = regmap_smccfg;
	pmu_regmcfg.max_register = resource_size(res) -
	pmu_regmcfg.reg_stride;
	/* Need physical address for SMC call */
	regmap = devm_regmap_init(dev, NULL,
	(void *)(uintptr_t)res->start,
	&pmu_regmcfg);

	if (IS_ERR(regmap))
	return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
	"regmap init failed\n");

	ret = of_syscon_register_regmap(dev->of_node, regmap);
	if (ret)
	return ret;
	} else {
	/* let syscon create mmio regmap */
	regmap = syscon_node_to_regmap(dev->of_node);
	if (IS_ERR(regmap))
	return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
	"syscon_node_to_regmap failed\n");
	}

	pmu_context->pmureg = regmap;
	pmu_context->dev = dev;

	if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_init)
	pmu_context->pmu_data->pmu_init();

	platform_set_drvdata(pdev, pmu_context);

	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, exynos_pmu_devs,
	ARRAY_SIZE(exynos_pmu_devs), NULL, 0, NULL);
	if (ret)
	return ret;

	if (devm_of_platform_populate(dev))
	dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n");

	dev_dbg(dev, "Exynos PMU Driver probe done\n");
	return 0;
	}

	static struct platform_driver exynos_pmu_driver = {
	.driver = {
	.name = "exynos-pmu",
	.of_match_table = exynos_pmu_of_device_ids,
	},
	.probe = exynos_pmu_probe,
	};

	static int __init exynos_pmu_init(void)
	{
	return platform_driver_register(&exynos_pmu_driver);

	}
	postcore_initcall(exynos_pmu_init);