| /* SPDX-License-Identifier: MIT */ |
| /****************************************************************************** |
| * displif.h |
| * |
| * Unified display device I/O interface for Xen guest OSes. |
| * |
| * Copyright (C) 2016-2017 EPAM Systems Inc. |
| * |
| * Authors: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> |
| * Oleksandr Grytsov <oleksandr_grytsov@epam.com> |
| */ |
| |
| #ifndef __XEN_PUBLIC_IO_DISPLIF_H__ |
| #define __XEN_PUBLIC_IO_DISPLIF_H__ |
| |
| #include "ring.h" |
| #include "../grant_table.h" |
| |
| /* |
| ****************************************************************************** |
| * Protocol version |
| ****************************************************************************** |
| */ |
| #define XENDISPL_PROTOCOL_VERSION "2" |
| #define XENDISPL_PROTOCOL_VERSION_INT 2 |
| |
| /* |
| ****************************************************************************** |
| * Main features provided by the protocol |
| ****************************************************************************** |
| * This protocol aims to provide a unified protocol which fits more |
| * sophisticated use-cases than a framebuffer device can handle. At the |
| * moment basic functionality is supported with the intention to be extended: |
| * o multiple dynamically allocated/destroyed framebuffers |
| * o buffers of arbitrary sizes |
| * o buffer allocation at either back or front end |
| * o better configuration options including multiple display support |
| * |
| * Note: existing fbif can be used together with displif running at the |
| * same time, e.g. on Linux one provides framebuffer and another DRM/KMS |
| * |
| * Note: display resolution (XenStore's "resolution" property) defines |
| * visible area of the virtual display. At the same time resolution of |
| * the display and frame buffers may differ: buffers can be smaller, equal |
| * or bigger than the visible area. This is to enable use-cases, where backend |
| * may do some post-processing of the display and frame buffers supplied, |
| * e.g. those buffers can be just a part of the final composition. |
| * |
| ****************************************************************************** |
| * Direction of improvements |
| ****************************************************************************** |
| * Future extensions to the existing protocol may include: |
| * o display/connector cloning |
| * o allocation of objects other than display buffers |
| * o plane/overlay support |
| * o scaling support |
| * o rotation support |
| * |
| ****************************************************************************** |
| * Feature and Parameter Negotiation |
| ****************************************************************************** |
| * |
| * Front->back notifications: when enqueuing a new request, sending a |
| * notification can be made conditional on xendispl_req (i.e., the generic |
| * hold-off mechanism provided by the ring macros). Backends must set |
| * xendispl_req appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()). |
| * |
| * Back->front notifications: when enqueuing a new response, sending a |
| * notification can be made conditional on xendispl_resp (i.e., the generic |
| * hold-off mechanism provided by the ring macros). Frontends must set |
| * xendispl_resp appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()). |
| * |
| * The two halves of a para-virtual display driver utilize nodes within |
| * XenStore to communicate capabilities and to negotiate operating parameters. |
| * This section enumerates these nodes which reside in the respective front and |
| * backend portions of XenStore, following the XenBus convention. |
| * |
| * All data in XenStore is stored as strings. Nodes specifying numeric |
| * values are encoded in decimal. Integer value ranges listed below are |
| * expressed as fixed sized integer types capable of storing the conversion |
| * of a properly formated node string, without loss of information. |
| * |
| ****************************************************************************** |
| * Example configuration |
| ****************************************************************************** |
| * |
| * Note: depending on the use-case backend can expose more display connectors |
| * than the underlying HW physically has by employing SW graphics compositors |
| * |
| * This is an example of backend and frontend configuration: |
| * |
| *--------------------------------- Backend ----------------------------------- |
| * |
| * /local/domain/0/backend/vdispl/1/0/frontend-id = "1" |
| * /local/domain/0/backend/vdispl/1/0/frontend = "/local/domain/1/device/vdispl/0" |
| * /local/domain/0/backend/vdispl/1/0/state = "4" |
| * /local/domain/0/backend/vdispl/1/0/versions = "1,2" |
| * |
| *--------------------------------- Frontend ---------------------------------- |
| * |
| * /local/domain/1/device/vdispl/0/backend-id = "0" |
| * /local/domain/1/device/vdispl/0/backend = "/local/domain/0/backend/vdispl/1/0" |
| * /local/domain/1/device/vdispl/0/state = "4" |
| * /local/domain/1/device/vdispl/0/version = "1" |
| * /local/domain/1/device/vdispl/0/be-alloc = "1" |
| * |
| *-------------------------- Connector 0 configuration ------------------------ |
| * |
| * /local/domain/1/device/vdispl/0/0/resolution = "1920x1080" |
| * /local/domain/1/device/vdispl/0/0/req-ring-ref = "2832" |
| * /local/domain/1/device/vdispl/0/0/req-event-channel = "15" |
| * /local/domain/1/device/vdispl/0/0/evt-ring-ref = "387" |
| * /local/domain/1/device/vdispl/0/0/evt-event-channel = "16" |
| * |
| *-------------------------- Connector 1 configuration ------------------------ |
| * |
| * /local/domain/1/device/vdispl/0/1/resolution = "800x600" |
| * /local/domain/1/device/vdispl/0/1/req-ring-ref = "2833" |
| * /local/domain/1/device/vdispl/0/1/req-event-channel = "17" |
| * /local/domain/1/device/vdispl/0/1/evt-ring-ref = "388" |
| * /local/domain/1/device/vdispl/0/1/evt-event-channel = "18" |
| * |
| ****************************************************************************** |
| * Backend XenBus Nodes |
| ****************************************************************************** |
| * |
| *----------------------------- Protocol version ------------------------------ |
| * |
| * versions |
| * Values: <string> |
| * |
| * List of XENDISPL_LIST_SEPARATOR separated protocol versions supported |
| * by the backend. For example "1,2,3". |
| * |
| ****************************************************************************** |
| * Frontend XenBus Nodes |
| ****************************************************************************** |
| * |
| *-------------------------------- Addressing --------------------------------- |
| * |
| * dom-id |
| * Values: <uint16_t> |
| * |
| * Domain identifier. |
| * |
| * dev-id |
| * Values: <uint16_t> |
| * |
| * Device identifier. |
| * |
| * conn-idx |
| * Values: <uint8_t> |
| * |
| * Zero based contigous index of the connector. |
| * /local/domain/<dom-id>/device/vdispl/<dev-id>/<conn-idx>/... |
| * |
| *----------------------------- Protocol version ------------------------------ |
| * |
| * version |
| * Values: <string> |
| * |
| * Protocol version, chosen among the ones supported by the backend. |
| * |
| *------------------------- Backend buffer allocation ------------------------- |
| * |
| * be-alloc |
| * Values: "0", "1" |
| * |
| * If value is set to "1", then backend can be a buffer provider/allocator |
| * for this domain during XENDISPL_OP_DBUF_CREATE operation (see below |
| * for negotiation). |
| * If value is not "1" or omitted frontend must allocate buffers itself. |
| * |
| *----------------------------- Connector settings ---------------------------- |
| * |
| * unique-id |
| * Values: <string> |
| * |
| * After device instance initialization each connector is assigned a |
| * unique ID, so it can be identified by the backend by this ID. |
| * This can be UUID or such. |
| * |
| * resolution |
| * Values: <width, uint32_t>x<height, uint32_t> |
| * |
| * Width and height of the connector in pixels separated by |
| * XENDISPL_RESOLUTION_SEPARATOR. This defines visible area of the |
| * display. |
| * If backend provides extended display identification data (EDID) with |
| * XENDISPL_OP_GET_EDID request then EDID values must take precedence |
| * over the resolutions defined here. |
| * |
| *------------------ Connector Request Transport Parameters ------------------- |
| * |
| * This communication path is used to deliver requests from frontend to backend |
| * and get the corresponding responses from backend to frontend, |
| * set up per connector. |
| * |
| * req-event-channel |
| * Values: <uint32_t> |
| * |
| * The identifier of the Xen connector's control event channel |
| * used to signal activity in the ring buffer. |
| * |
| * req-ring-ref |
| * Values: <uint32_t> |
| * |
| * The Xen grant reference granting permission for the backend to map |
| * a sole page of connector's control ring buffer. |
| * |
| *------------------- Connector Event Transport Parameters -------------------- |
| * |
| * This communication path is used to deliver asynchronous events from backend |
| * to frontend, set up per connector. |
| * |
| * evt-event-channel |
| * Values: <uint32_t> |
| * |
| * The identifier of the Xen connector's event channel |
| * used to signal activity in the ring buffer. |
| * |
| * evt-ring-ref |
| * Values: <uint32_t> |
| * |
| * The Xen grant reference granting permission for the backend to map |
| * a sole page of connector's event ring buffer. |
| */ |
| |
| /* |
| ****************************************************************************** |
| * STATE DIAGRAMS |
| ****************************************************************************** |
| * |
| * Tool stack creates front and back state nodes with initial state |
| * XenbusStateInitialising. |
| * Tool stack creates and sets up frontend display configuration |
| * nodes per domain. |
| * |
| *-------------------------------- Normal flow -------------------------------- |
| * |
| * Front Back |
| * ================================= ===================================== |
| * XenbusStateInitialising XenbusStateInitialising |
| * o Query backend device identification |
| * data. |
| * o Open and validate backend device. |
| * | |
| * | |
| * V |
| * XenbusStateInitWait |
| * |
| * o Query frontend configuration |
| * o Allocate and initialize |
| * event channels per configured |
| * connector. |
| * o Publish transport parameters |
| * that will be in effect during |
| * this connection. |
| * | |
| * | |
| * V |
| * XenbusStateInitialised |
| * |
| * o Query frontend transport parameters. |
| * o Connect to the event channels. |
| * | |
| * | |
| * V |
| * XenbusStateConnected |
| * |
| * o Create and initialize OS |
| * virtual display connectors |
| * as per configuration. |
| * | |
| * | |
| * V |
| * XenbusStateConnected |
| * |
| * XenbusStateUnknown |
| * XenbusStateClosed |
| * XenbusStateClosing |
| * o Remove virtual display device |
| * o Remove event channels |
| * | |
| * | |
| * V |
| * XenbusStateClosed |
| * |
| *------------------------------- Recovery flow ------------------------------- |
| * |
| * In case of frontend unrecoverable errors backend handles that as |
| * if frontend goes into the XenbusStateClosed state. |
| * |
| * In case of backend unrecoverable errors frontend tries removing |
| * the virtualized device. If this is possible at the moment of error, |
| * then frontend goes into the XenbusStateInitialising state and is ready for |
| * new connection with backend. If the virtualized device is still in use and |
| * cannot be removed, then frontend goes into the XenbusStateReconfiguring state |
| * until either the virtualized device is removed or backend initiates a new |
| * connection. On the virtualized device removal frontend goes into the |
| * XenbusStateInitialising state. |
| * |
| * Note on XenbusStateReconfiguring state of the frontend: if backend has |
| * unrecoverable errors then frontend cannot send requests to the backend |
| * and thus cannot provide functionality of the virtualized device anymore. |
| * After backend is back to normal the virtualized device may still hold some |
| * state: configuration in use, allocated buffers, client application state etc. |
| * In most cases, this will require frontend to implement complex recovery |
| * reconnect logic. Instead, by going into XenbusStateReconfiguring state, |
| * frontend will make sure no new clients of the virtualized device are |
| * accepted, allow existing client(s) to exit gracefully by signaling error |
| * state etc. |
| * Once all the clients are gone frontend can reinitialize the virtualized |
| * device and get into XenbusStateInitialising state again signaling the |
| * backend that a new connection can be made. |
| * |
| * There are multiple conditions possible under which frontend will go from |
| * XenbusStateReconfiguring into XenbusStateInitialising, some of them are OS |
| * specific. For example: |
| * 1. The underlying OS framework may provide callbacks to signal that the last |
| * client of the virtualized device has gone and the device can be removed |
| * 2. Frontend can schedule a deferred work (timer/tasklet/workqueue) |
| * to periodically check if this is the right time to re-try removal of |
| * the virtualized device. |
| * 3. By any other means. |
| * |
| ****************************************************************************** |
| * REQUEST CODES |
| ****************************************************************************** |
| * Request codes [0; 15] are reserved and must not be used |
| */ |
| |
| #define XENDISPL_OP_DBUF_CREATE 0x10 |
| #define XENDISPL_OP_DBUF_DESTROY 0x11 |
| #define XENDISPL_OP_FB_ATTACH 0x12 |
| #define XENDISPL_OP_FB_DETACH 0x13 |
| #define XENDISPL_OP_SET_CONFIG 0x14 |
| #define XENDISPL_OP_PG_FLIP 0x15 |
| /* The below command is available in protocol version 2 and above. */ |
| #define XENDISPL_OP_GET_EDID 0x16 |
| |
| /* |
| ****************************************************************************** |
| * EVENT CODES |
| ****************************************************************************** |
| */ |
| #define XENDISPL_EVT_PG_FLIP 0x00 |
| |
| /* |
| ****************************************************************************** |
| * XENSTORE FIELD AND PATH NAME STRINGS, HELPERS |
| ****************************************************************************** |
| */ |
| #define XENDISPL_DRIVER_NAME "vdispl" |
| |
| #define XENDISPL_LIST_SEPARATOR "," |
| #define XENDISPL_RESOLUTION_SEPARATOR "x" |
| |
| #define XENDISPL_FIELD_BE_VERSIONS "versions" |
| #define XENDISPL_FIELD_FE_VERSION "version" |
| #define XENDISPL_FIELD_REQ_RING_REF "req-ring-ref" |
| #define XENDISPL_FIELD_REQ_CHANNEL "req-event-channel" |
| #define XENDISPL_FIELD_EVT_RING_REF "evt-ring-ref" |
| #define XENDISPL_FIELD_EVT_CHANNEL "evt-event-channel" |
| #define XENDISPL_FIELD_RESOLUTION "resolution" |
| #define XENDISPL_FIELD_BE_ALLOC "be-alloc" |
| #define XENDISPL_FIELD_UNIQUE_ID "unique-id" |
| |
| #define XENDISPL_EDID_BLOCK_SIZE 128 |
| #define XENDISPL_EDID_BLOCK_COUNT 256 |
| #define XENDISPL_EDID_MAX_SIZE (XENDISPL_EDID_BLOCK_SIZE * XENDISPL_EDID_BLOCK_COUNT) |
| |
| /* |
| ****************************************************************************** |
| * STATUS RETURN CODES |
| ****************************************************************************** |
| * |
| * Status return code is zero on success and -XEN_EXX on failure. |
| * |
| ****************************************************************************** |
| * Assumptions |
| ****************************************************************************** |
| * o usage of grant reference 0 as invalid grant reference: |
| * grant reference 0 is valid, but never exposed to a PV driver, |
| * because of the fact it is already in use/reserved by the PV console. |
| * o all references in this document to page sizes must be treated |
| * as pages of size XEN_PAGE_SIZE unless otherwise noted. |
| * |
| ****************************************************************************** |
| * Description of the protocol between frontend and backend driver |
| ****************************************************************************** |
| * |
| * The two halves of a Para-virtual display driver communicate with |
| * each other using shared pages and event channels. |
| * Shared page contains a ring with request/response packets. |
| * |
| * All reserved fields in the structures below must be 0. |
| * Display buffers's cookie of value 0 is treated as invalid. |
| * Framebuffer's cookie of value 0 is treated as invalid. |
| * |
| * For all request/response/event packets that use cookies: |
| * dbuf_cookie - uint64_t, unique to guest domain value used by the backend |
| * to map remote display buffer to its local one |
| * fb_cookie - uint64_t, unique to guest domain value used by the backend |
| * to map remote framebuffer to its local one |
| * |
| *---------------------------------- Requests --------------------------------- |
| * |
| * All requests/responses, which are not connector specific, must be sent over |
| * control ring of the connector which has the index value of 0: |
| * /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref |
| * |
| * All request packets have the same length (64 octets) |
| * All request packets have common header: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | operation | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * id - uint16_t, private guest value, echoed in response |
| * operation - uint8_t, operation code, XENDISPL_OP_??? |
| * |
| * Request dbuf creation - request creation of a display buffer. |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id |_OP_DBUF_CREATE | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | dbuf_cookie low 32-bit | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | dbuf_cookie high 32-bit | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * | width | 20 |
| * +----------------+----------------+----------------+----------------+ |
| * | height | 24 |
| * +----------------+----------------+----------------+----------------+ |
| * | bpp | 28 |
| * +----------------+----------------+----------------+----------------+ |
| * | buffer_sz | 32 |
| * +----------------+----------------+----------------+----------------+ |
| * | flags | 36 |
| * +----------------+----------------+----------------+----------------+ |
| * | gref_directory | 40 |
| * +----------------+----------------+----------------+----------------+ |
| * | data_ofs | 44 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 48 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * Must be sent over control ring of the connector which has the index |
| * value of 0: |
| * /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref |
| * All unused bits in flags field must be set to 0. |
| * |
| * An attempt to create multiple display buffers with the same dbuf_cookie is |
| * an error. dbuf_cookie can be re-used after destroying the corresponding |
| * display buffer. |
| * |
| * Width and height of the display buffers can be smaller, equal or bigger |
| * than the connector's resolution. Depth/pixel format of the individual |
| * buffers can differ as well. |
| * |
| * width - uint32_t, width in pixels |
| * height - uint32_t, height in pixels |
| * bpp - uint32_t, bits per pixel |
| * buffer_sz - uint32_t, buffer size to be allocated, octets |
| * flags - uint32_t, flags of the operation |
| * o XENDISPL_DBUF_FLG_REQ_ALLOC - if set, then backend is requested |
| * to allocate the buffer with the parameters provided in this request. |
| * Page directory is handled as follows: |
| * Frontend on request: |
| * o allocates pages for the directory (gref_directory, |
| * gref_dir_next_page(s) |
| * o grants permissions for the pages of the directory to the backend |
| * o sets gref_dir_next_page fields |
| * Backend on response: |
| * o grants permissions for the pages of the buffer allocated to |
| * the frontend |
| * o fills in page directory with grant references |
| * (gref[] in struct xendispl_page_directory) |
| * gref_directory - grant_ref_t, a reference to the first shared page |
| * describing shared buffer references. At least one page exists. If shared |
| * buffer size (buffer_sz) exceeds what can be addressed by this single page, |
| * then reference to the next page must be supplied (see gref_dir_next_page |
| * below) |
| * data_ofs - uint32_t, offset of the data in the buffer, octets |
| */ |
| |
| #define XENDISPL_DBUF_FLG_REQ_ALLOC (1 << 0) |
| |
| struct xendispl_dbuf_create_req { |
| uint64_t dbuf_cookie; |
| uint32_t width; |
| uint32_t height; |
| uint32_t bpp; |
| uint32_t buffer_sz; |
| uint32_t flags; |
| grant_ref_t gref_directory; |
| uint32_t data_ofs; |
| }; |
| |
| /* |
| * Shared page for XENDISPL_OP_DBUF_CREATE buffer descriptor (gref_directory in |
| * the request) employs a list of pages, describing all pages of the shared |
| * data buffer: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | gref_dir_next_page | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | gref[0] | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | gref[i] | i*4+8 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | gref[N - 1] | N*4+8 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * gref_dir_next_page - grant_ref_t, reference to the next page describing |
| * page directory. Must be 0 if there are no more pages in the list. |
| * gref[i] - grant_ref_t, reference to a shared page of the buffer |
| * allocated at XENDISPL_OP_DBUF_CREATE |
| * |
| * Number of grant_ref_t entries in the whole page directory is not |
| * passed, but instead can be calculated as: |
| * num_grefs_total = (XENDISPL_OP_DBUF_CREATE.buffer_sz + XEN_PAGE_SIZE - 1) / |
| * XEN_PAGE_SIZE |
| */ |
| |
| struct xendispl_page_directory { |
| grant_ref_t gref_dir_next_page; |
| grant_ref_t gref[1]; /* Variable length */ |
| }; |
| |
| /* |
| * Request dbuf destruction - destroy a previously allocated display buffer: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id |_OP_DBUF_DESTROY| reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | dbuf_cookie low 32-bit | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | dbuf_cookie high 32-bit | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 20 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * Must be sent over control ring of the connector which has the index |
| * value of 0: |
| * /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref |
| */ |
| |
| struct xendispl_dbuf_destroy_req { |
| uint64_t dbuf_cookie; |
| }; |
| |
| /* |
| * Request framebuffer attachment - request attachment of a framebuffer to |
| * previously created display buffer. |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | _OP_FB_ATTACH | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | dbuf_cookie low 32-bit | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | dbuf_cookie high 32-bit | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie low 32-bit | 20 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie high 32-bit | 24 |
| * +----------------+----------------+----------------+----------------+ |
| * | width | 28 |
| * +----------------+----------------+----------------+----------------+ |
| * | height | 32 |
| * +----------------+----------------+----------------+----------------+ |
| * | pixel_format | 36 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 40 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * Must be sent over control ring of the connector which has the index |
| * value of 0: |
| * /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref |
| * Width and height can be smaller, equal or bigger than the connector's |
| * resolution. |
| * |
| * An attempt to create multiple frame buffers with the same fb_cookie is |
| * an error. fb_cookie can be re-used after destroying the corresponding |
| * frame buffer. |
| * |
| * width - uint32_t, width in pixels |
| * height - uint32_t, height in pixels |
| * pixel_format - uint32_t, pixel format of the framebuffer, FOURCC code |
| */ |
| |
| struct xendispl_fb_attach_req { |
| uint64_t dbuf_cookie; |
| uint64_t fb_cookie; |
| uint32_t width; |
| uint32_t height; |
| uint32_t pixel_format; |
| }; |
| |
| /* |
| * Request framebuffer detach - detach a previously |
| * attached framebuffer from the display buffer in request: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | _OP_FB_DETACH | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie low 32-bit | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie high 32-bit | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 20 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * Must be sent over control ring of the connector which has the index |
| * value of 0: |
| * /local/domain/<dom-id>/device/vdispl/<dev-id>/0/req-ring-ref |
| */ |
| |
| struct xendispl_fb_detach_req { |
| uint64_t fb_cookie; |
| }; |
| |
| /* |
| * Request configuration set/reset - request to set or reset |
| * the configuration/mode of the display: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | _OP_SET_CONFIG | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie low 32-bit | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie high 32-bit | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * | x | 20 |
| * +----------------+----------------+----------------+----------------+ |
| * | y | 24 |
| * +----------------+----------------+----------------+----------------+ |
| * | width | 28 |
| * +----------------+----------------+----------------+----------------+ |
| * | height | 32 |
| * +----------------+----------------+----------------+----------------+ |
| * | bpp | 40 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 44 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * Pass all zeros to reset, otherwise command is treated as |
| * configuration set. |
| * Framebuffer's cookie defines which framebuffer/dbuf must be |
| * displayed while enabling display (applying configuration). |
| * x, y, width and height are bound by the connector's resolution and must not |
| * exceed it. |
| * |
| * x - uint32_t, starting position in pixels by X axis |
| * y - uint32_t, starting position in pixels by Y axis |
| * width - uint32_t, width in pixels |
| * height - uint32_t, height in pixels |
| * bpp - uint32_t, bits per pixel |
| */ |
| |
| struct xendispl_set_config_req { |
| uint64_t fb_cookie; |
| uint32_t x; |
| uint32_t y; |
| uint32_t width; |
| uint32_t height; |
| uint32_t bpp; |
| }; |
| |
| /* |
| * Request page flip - request to flip a page identified by the framebuffer |
| * cookie: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | _OP_PG_FLIP | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie low 32-bit | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie high 32-bit | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 20 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| */ |
| |
| struct xendispl_page_flip_req { |
| uint64_t fb_cookie; |
| }; |
| |
| /* |
| * Request EDID - request EDID describing current connector: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | _OP_GET_EDID | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | buffer_sz | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | gref_directory | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * Notes: |
| * - This command is not available in protocol version 1 and should be |
| * ignored. |
| * - This request is optional and if not supported then visible area |
| * is defined by the relevant XenStore's "resolution" property. |
| * - Shared buffer, allocated for EDID storage, must not be less then |
| * XENDISPL_EDID_MAX_SIZE octets. |
| * |
| * buffer_sz - uint32_t, buffer size to be allocated, octets |
| * gref_directory - grant_ref_t, a reference to the first shared page |
| * describing EDID buffer references. See XENDISPL_OP_DBUF_CREATE for |
| * grant page directory structure (struct xendispl_page_directory). |
| * |
| * See response format for this request. |
| */ |
| |
| struct xendispl_get_edid_req { |
| uint32_t buffer_sz; |
| grant_ref_t gref_directory; |
| }; |
| |
| /* |
| *---------------------------------- Responses -------------------------------- |
| * |
| * All response packets have the same length (64 octets) |
| * |
| * All response packets have common header: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | status | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * id - uint16_t, private guest value, echoed from request |
| * status - int32_t, response status, zero on success and -XEN_EXX on failure |
| * |
| * |
| * Get EDID response - response for XENDISPL_OP_GET_EDID: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | operation | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | status | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | edid_sz | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * Notes: |
| * - This response is not available in protocol version 1 and should be |
| * ignored. |
| * |
| * edid_sz - uint32_t, size of the EDID, octets |
| */ |
| |
| struct xendispl_get_edid_resp { |
| uint32_t edid_sz; |
| }; |
| |
| /* |
| *----------------------------------- Events ---------------------------------- |
| * |
| * Events are sent via a shared page allocated by the front and propagated by |
| * evt-event-channel/evt-ring-ref XenStore entries |
| * All event packets have the same length (64 octets) |
| * All event packets have common header: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | type | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * |
| * id - uint16_t, event id, may be used by front |
| * type - uint8_t, type of the event |
| * |
| * |
| * Page flip complete event - event from back to front on page flip completed: |
| * 0 1 2 3 octet |
| * +----------------+----------------+----------------+----------------+ |
| * | id | _EVT_PG_FLIP | reserved | 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 8 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie low 32-bit | 12 |
| * +----------------+----------------+----------------+----------------+ |
| * | fb_cookie high 32-bit | 16 |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 20 |
| * +----------------+----------------+----------------+----------------+ |
| * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| |
| * +----------------+----------------+----------------+----------------+ |
| * | reserved | 64 |
| * +----------------+----------------+----------------+----------------+ |
| */ |
| |
| struct xendispl_pg_flip_evt { |
| uint64_t fb_cookie; |
| }; |
| |
| struct xendispl_req { |
| uint16_t id; |
| uint8_t operation; |
| uint8_t reserved[5]; |
| union { |
| struct xendispl_dbuf_create_req dbuf_create; |
| struct xendispl_dbuf_destroy_req dbuf_destroy; |
| struct xendispl_fb_attach_req fb_attach; |
| struct xendispl_fb_detach_req fb_detach; |
| struct xendispl_set_config_req set_config; |
| struct xendispl_page_flip_req pg_flip; |
| struct xendispl_get_edid_req get_edid; |
| uint8_t reserved[56]; |
| } op; |
| }; |
| |
| struct xendispl_resp { |
| uint16_t id; |
| uint8_t operation; |
| uint8_t reserved; |
| int32_t status; |
| union { |
| struct xendispl_get_edid_resp get_edid; |
| uint8_t reserved1[56]; |
| } op; |
| }; |
| |
| struct xendispl_evt { |
| uint16_t id; |
| uint8_t type; |
| uint8_t reserved[5]; |
| union { |
| struct xendispl_pg_flip_evt pg_flip; |
| uint8_t reserved[56]; |
| } op; |
| }; |
| |
| DEFINE_RING_TYPES(xen_displif, struct xendispl_req, struct xendispl_resp); |
| |
| /* |
| ****************************************************************************** |
| * Back to front events delivery |
| ****************************************************************************** |
| * In order to deliver asynchronous events from back to front a shared page is |
| * allocated by front and its granted reference propagated to back via |
| * XenStore entries (evt-ring-ref/evt-event-channel). |
| * This page has a common header used by both front and back to synchronize |
| * access and control event's ring buffer, while back being a producer of the |
| * events and front being a consumer. The rest of the page after the header |
| * is used for event packets. |
| * |
| * Upon reception of an event(s) front may confirm its reception |
| * for either each event, group of events or none. |
| */ |
| |
| struct xendispl_event_page { |
| uint32_t in_cons; |
| uint32_t in_prod; |
| uint8_t reserved[56]; |
| }; |
| |
| #define XENDISPL_EVENT_PAGE_SIZE XEN_PAGE_SIZE |
| #define XENDISPL_IN_RING_OFFS (sizeof(struct xendispl_event_page)) |
| #define XENDISPL_IN_RING_SIZE (XENDISPL_EVENT_PAGE_SIZE - XENDISPL_IN_RING_OFFS) |
| #define XENDISPL_IN_RING_LEN (XENDISPL_IN_RING_SIZE / sizeof(struct xendispl_evt)) |
| #define XENDISPL_IN_RING(page) \ |
| ((struct xendispl_evt *)((char *)(page) + XENDISPL_IN_RING_OFFS)) |
| #define XENDISPL_IN_RING_REF(page, idx) \ |
| (XENDISPL_IN_RING((page))[(idx) % XENDISPL_IN_RING_LEN]) |
| |
| #endif /* __XEN_PUBLIC_IO_DISPLIF_H__ */ |
