| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright 2018 NXP |
| |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/kobject.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/sysfs.h> |
| #include <linux/types.h> |
| #include <sound/dmaengine_pcm.h> |
| #include <sound/pcm.h> |
| #include <sound/soc.h> |
| #include <sound/tlv.h> |
| #include <sound/core.h> |
| |
| #include "fsl_micfil.h" |
| #include "imx-pcm.h" |
| |
| #define FSL_MICFIL_RATES SNDRV_PCM_RATE_8000_48000 |
| #define FSL_MICFIL_FORMATS (SNDRV_PCM_FMTBIT_S16_LE) |
| |
| struct fsl_micfil { |
| struct platform_device *pdev; |
| struct regmap *regmap; |
| const struct fsl_micfil_soc_data *soc; |
| struct clk *busclk; |
| struct clk *mclk; |
| struct snd_dmaengine_dai_dma_data dma_params_rx; |
| unsigned int dataline; |
| char name[32]; |
| int irq[MICFIL_IRQ_LINES]; |
| unsigned int mclk_streams; |
| int quality; /*QUALITY 2-0 bits */ |
| bool slave_mode; |
| int channel_gain[8]; |
| }; |
| |
| struct fsl_micfil_soc_data { |
| unsigned int fifos; |
| unsigned int fifo_depth; |
| unsigned int dataline; |
| bool imx; |
| }; |
| |
| static struct fsl_micfil_soc_data fsl_micfil_imx8mm = { |
| .imx = true, |
| .fifos = 8, |
| .fifo_depth = 8, |
| .dataline = 0xf, |
| }; |
| |
| static const struct of_device_id fsl_micfil_dt_ids[] = { |
| { .compatible = "fsl,imx8mm-micfil", .data = &fsl_micfil_imx8mm }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_micfil_dt_ids); |
| |
| /* Table 5. Quality Modes |
| * Medium 0 0 0 |
| * High 0 0 1 |
| * Very Low 2 1 0 0 |
| * Very Low 1 1 0 1 |
| * Very Low 0 1 1 0 |
| * Low 1 1 1 |
| */ |
| static const char * const micfil_quality_select_texts[] = { |
| "Medium", "High", |
| "N/A", "N/A", |
| "VLow2", "VLow1", |
| "VLow0", "Low", |
| }; |
| |
| static const struct soc_enum fsl_micfil_quality_enum = |
| SOC_ENUM_SINGLE(REG_MICFIL_CTRL2, |
| MICFIL_CTRL2_QSEL_SHIFT, |
| ARRAY_SIZE(micfil_quality_select_texts), |
| micfil_quality_select_texts); |
| |
| static DECLARE_TLV_DB_SCALE(gain_tlv, 0, 100, 0); |
| |
| static const struct snd_kcontrol_new fsl_micfil_snd_controls[] = { |
| SOC_SINGLE_SX_TLV("CH0 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(0), 0xF, 0x7, gain_tlv), |
| SOC_SINGLE_SX_TLV("CH1 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(1), 0xF, 0x7, gain_tlv), |
| SOC_SINGLE_SX_TLV("CH2 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(2), 0xF, 0x7, gain_tlv), |
| SOC_SINGLE_SX_TLV("CH3 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(3), 0xF, 0x7, gain_tlv), |
| SOC_SINGLE_SX_TLV("CH4 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(4), 0xF, 0x7, gain_tlv), |
| SOC_SINGLE_SX_TLV("CH5 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(5), 0xF, 0x7, gain_tlv), |
| SOC_SINGLE_SX_TLV("CH6 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(6), 0xF, 0x7, gain_tlv), |
| SOC_SINGLE_SX_TLV("CH7 Volume", REG_MICFIL_OUT_CTRL, |
| MICFIL_OUTGAIN_CHX_SHIFT(7), 0xF, 0x7, gain_tlv), |
| SOC_ENUM_EXT("MICFIL Quality Select", |
| fsl_micfil_quality_enum, |
| snd_soc_get_enum_double, snd_soc_put_enum_double), |
| }; |
| |
| static inline int get_pdm_clk(struct fsl_micfil *micfil, |
| unsigned int rate) |
| { |
| u32 ctrl2_reg; |
| int qsel, osr; |
| int bclk; |
| |
| regmap_read(micfil->regmap, REG_MICFIL_CTRL2, &ctrl2_reg); |
| osr = 16 - ((ctrl2_reg & MICFIL_CTRL2_CICOSR_MASK) |
| >> MICFIL_CTRL2_CICOSR_SHIFT); |
| |
| regmap_read(micfil->regmap, REG_MICFIL_CTRL2, &ctrl2_reg); |
| qsel = ctrl2_reg & MICFIL_CTRL2_QSEL_MASK; |
| |
| switch (qsel) { |
| case MICFIL_HIGH_QUALITY: |
| bclk = rate * 8 * osr / 2; /* kfactor = 0.5 */ |
| break; |
| case MICFIL_MEDIUM_QUALITY: |
| case MICFIL_VLOW0_QUALITY: |
| bclk = rate * 4 * osr * 1; /* kfactor = 1 */ |
| break; |
| case MICFIL_LOW_QUALITY: |
| case MICFIL_VLOW1_QUALITY: |
| bclk = rate * 2 * osr * 2; /* kfactor = 2 */ |
| break; |
| case MICFIL_VLOW2_QUALITY: |
| bclk = rate * osr * 4; /* kfactor = 4 */ |
| break; |
| default: |
| dev_err(&micfil->pdev->dev, |
| "Please make sure you select a valid quality.\n"); |
| bclk = -1; |
| break; |
| } |
| |
| return bclk; |
| } |
| |
| static inline int get_clk_div(struct fsl_micfil *micfil, |
| unsigned int rate) |
| { |
| u32 ctrl2_reg; |
| long mclk_rate; |
| int clk_div; |
| |
| regmap_read(micfil->regmap, REG_MICFIL_CTRL2, &ctrl2_reg); |
| |
| mclk_rate = clk_get_rate(micfil->mclk); |
| |
| clk_div = mclk_rate / (get_pdm_clk(micfil, rate) * 2); |
| |
| return clk_div; |
| } |
| |
| /* The SRES is a self-negated bit which provides the CPU with the |
| * capability to initialize the PDM Interface module through the |
| * slave-bus interface. This bit always reads as zero, and this |
| * bit is only effective when MDIS is cleared |
| */ |
| static int fsl_micfil_reset(struct device *dev) |
| { |
| struct fsl_micfil *micfil = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = regmap_update_bits(micfil->regmap, |
| REG_MICFIL_CTRL1, |
| MICFIL_CTRL1_MDIS_MASK, |
| 0); |
| if (ret) { |
| dev_err(dev, "failed to clear MDIS bit %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(micfil->regmap, |
| REG_MICFIL_CTRL1, |
| MICFIL_CTRL1_SRES_MASK, |
| MICFIL_CTRL1_SRES); |
| if (ret) { |
| dev_err(dev, "failed to reset MICFIL: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_micfil_set_mclk_rate(struct fsl_micfil *micfil, |
| unsigned int freq) |
| { |
| struct device *dev = &micfil->pdev->dev; |
| int ret; |
| |
| clk_disable_unprepare(micfil->mclk); |
| |
| ret = clk_set_rate(micfil->mclk, freq * 1024); |
| if (ret) |
| dev_warn(dev, "failed to set rate (%u): %d\n", |
| freq * 1024, ret); |
| |
| clk_prepare_enable(micfil->mclk); |
| |
| return ret; |
| } |
| |
| static int fsl_micfil_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai); |
| |
| if (!micfil) { |
| dev_err(dai->dev, "micfil dai priv_data not set\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_micfil_trigger(struct snd_pcm_substream *substream, int cmd, |
| struct snd_soc_dai *dai) |
| { |
| struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai); |
| struct device *dev = &micfil->pdev->dev; |
| int ret; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| ret = fsl_micfil_reset(dev); |
| if (ret) { |
| dev_err(dev, "failed to soft reset\n"); |
| return ret; |
| } |
| |
| /* DMA Interrupt Selection - DISEL bits |
| * 00 - DMA and IRQ disabled |
| * 01 - DMA req enabled |
| * 10 - IRQ enabled |
| * 11 - reserved |
| */ |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, |
| MICFIL_CTRL1_DISEL_MASK, |
| (1 << MICFIL_CTRL1_DISEL_SHIFT)); |
| if (ret) { |
| dev_err(dev, "failed to update DISEL bits\n"); |
| return ret; |
| } |
| |
| /* Enable the module */ |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, |
| MICFIL_CTRL1_PDMIEN_MASK, |
| MICFIL_CTRL1_PDMIEN); |
| if (ret) { |
| dev_err(dev, "failed to enable the module\n"); |
| return ret; |
| } |
| |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| /* Disable the module */ |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, |
| MICFIL_CTRL1_PDMIEN_MASK, |
| 0); |
| if (ret) { |
| dev_err(dev, "failed to enable the module\n"); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, |
| MICFIL_CTRL1_DISEL_MASK, |
| (0 << MICFIL_CTRL1_DISEL_SHIFT)); |
| if (ret) { |
| dev_err(dev, "failed to update DISEL bits\n"); |
| return ret; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int fsl_set_clock_params(struct device *dev, unsigned int rate) |
| { |
| struct fsl_micfil *micfil = dev_get_drvdata(dev); |
| int clk_div; |
| int ret; |
| |
| ret = fsl_micfil_set_mclk_rate(micfil, rate); |
| if (ret < 0) |
| dev_err(dev, "failed to set mclk[%lu] to rate %u\n", |
| clk_get_rate(micfil->mclk), rate); |
| |
| /* set CICOSR */ |
| ret |= regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2, |
| MICFIL_CTRL2_CICOSR_MASK, |
| MICFIL_CTRL2_OSR_DEFAULT); |
| if (ret) |
| dev_err(dev, "failed to set CICOSR in reg 0x%X\n", |
| REG_MICFIL_CTRL2); |
| |
| /* set CLK_DIV */ |
| clk_div = get_clk_div(micfil, rate); |
| if (clk_div < 0) |
| ret = -EINVAL; |
| |
| ret |= regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2, |
| MICFIL_CTRL2_CLKDIV_MASK, clk_div); |
| if (ret) |
| dev_err(dev, "failed to set CLKDIV in reg 0x%X\n", |
| REG_MICFIL_CTRL2); |
| |
| return ret; |
| } |
| |
| static int fsl_micfil_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai); |
| unsigned int channels = params_channels(params); |
| unsigned int rate = params_rate(params); |
| struct device *dev = &micfil->pdev->dev; |
| int ret; |
| |
| /* 1. Disable the module */ |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, |
| MICFIL_CTRL1_PDMIEN_MASK, 0); |
| if (ret) { |
| dev_err(dev, "failed to disable the module\n"); |
| return ret; |
| } |
| |
| /* enable channels */ |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1, |
| 0xFF, ((1 << channels) - 1)); |
| if (ret) { |
| dev_err(dev, "failed to enable channels %d, reg 0x%X\n", ret, |
| REG_MICFIL_CTRL1); |
| return ret; |
| } |
| |
| ret = fsl_set_clock_params(dev, rate); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set clock parameters [%d]\n", ret); |
| return ret; |
| } |
| |
| micfil->dma_params_rx.maxburst = channels * MICFIL_DMA_MAXBURST_RX; |
| |
| return 0; |
| } |
| |
| static int fsl_micfil_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, |
| unsigned int freq, int dir) |
| { |
| struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai); |
| struct device *dev = &micfil->pdev->dev; |
| |
| int ret; |
| |
| if (!freq) |
| return 0; |
| |
| ret = fsl_micfil_set_mclk_rate(micfil, freq); |
| if (ret < 0) |
| dev_err(dev, "failed to set mclk[%lu] to rate %u\n", |
| clk_get_rate(micfil->mclk), freq); |
| |
| return ret; |
| } |
| |
| static const struct snd_soc_dai_ops fsl_micfil_dai_ops = { |
| .startup = fsl_micfil_startup, |
| .trigger = fsl_micfil_trigger, |
| .hw_params = fsl_micfil_hw_params, |
| .set_sysclk = fsl_micfil_set_dai_sysclk, |
| }; |
| |
| static int fsl_micfil_dai_probe(struct snd_soc_dai *cpu_dai) |
| { |
| struct fsl_micfil *micfil = dev_get_drvdata(cpu_dai->dev); |
| struct device *dev = cpu_dai->dev; |
| unsigned int val; |
| int ret; |
| int i; |
| |
| /* set qsel to medium */ |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2, |
| MICFIL_CTRL2_QSEL_MASK, MICFIL_MEDIUM_QUALITY); |
| if (ret) { |
| dev_err(dev, "failed to set quality mode bits, reg 0x%X\n", |
| REG_MICFIL_CTRL2); |
| return ret; |
| } |
| |
| /* set default gain to max_gain */ |
| regmap_write(micfil->regmap, REG_MICFIL_OUT_CTRL, 0x77777777); |
| for (i = 0; i < 8; i++) |
| micfil->channel_gain[i] = 0xF; |
| |
| snd_soc_dai_init_dma_data(cpu_dai, NULL, |
| &micfil->dma_params_rx); |
| |
| /* FIFO Watermark Control - FIFOWMK*/ |
| val = MICFIL_FIFO_CTRL_FIFOWMK(micfil->soc->fifo_depth) - 1; |
| ret = regmap_update_bits(micfil->regmap, REG_MICFIL_FIFO_CTRL, |
| MICFIL_FIFO_CTRL_FIFOWMK_MASK, |
| val); |
| if (ret) { |
| dev_err(dev, "failed to set FIFOWMK\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_driver fsl_micfil_dai = { |
| .probe = fsl_micfil_dai_probe, |
| .capture = { |
| .stream_name = "CPU-Capture", |
| .channels_min = 1, |
| .channels_max = 8, |
| .rates = FSL_MICFIL_RATES, |
| .formats = FSL_MICFIL_FORMATS, |
| }, |
| .ops = &fsl_micfil_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver fsl_micfil_component = { |
| .name = "fsl-micfil-dai", |
| .controls = fsl_micfil_snd_controls, |
| .num_controls = ARRAY_SIZE(fsl_micfil_snd_controls), |
| |
| }; |
| |
| /* REGMAP */ |
| static const struct reg_default fsl_micfil_reg_defaults[] = { |
| {REG_MICFIL_CTRL1, 0x00000000}, |
| {REG_MICFIL_CTRL2, 0x00000000}, |
| {REG_MICFIL_STAT, 0x00000000}, |
| {REG_MICFIL_FIFO_CTRL, 0x00000007}, |
| {REG_MICFIL_FIFO_STAT, 0x00000000}, |
| {REG_MICFIL_DATACH0, 0x00000000}, |
| {REG_MICFIL_DATACH1, 0x00000000}, |
| {REG_MICFIL_DATACH2, 0x00000000}, |
| {REG_MICFIL_DATACH3, 0x00000000}, |
| {REG_MICFIL_DATACH4, 0x00000000}, |
| {REG_MICFIL_DATACH5, 0x00000000}, |
| {REG_MICFIL_DATACH6, 0x00000000}, |
| {REG_MICFIL_DATACH7, 0x00000000}, |
| {REG_MICFIL_DC_CTRL, 0x00000000}, |
| {REG_MICFIL_OUT_CTRL, 0x00000000}, |
| {REG_MICFIL_OUT_STAT, 0x00000000}, |
| {REG_MICFIL_VAD0_CTRL1, 0x00000000}, |
| {REG_MICFIL_VAD0_CTRL2, 0x000A0000}, |
| {REG_MICFIL_VAD0_STAT, 0x00000000}, |
| {REG_MICFIL_VAD0_SCONFIG, 0x00000000}, |
| {REG_MICFIL_VAD0_NCONFIG, 0x80000000}, |
| {REG_MICFIL_VAD0_NDATA, 0x00000000}, |
| {REG_MICFIL_VAD0_ZCD, 0x00000004}, |
| }; |
| |
| static bool fsl_micfil_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_MICFIL_CTRL1: |
| case REG_MICFIL_CTRL2: |
| case REG_MICFIL_STAT: |
| case REG_MICFIL_FIFO_CTRL: |
| case REG_MICFIL_FIFO_STAT: |
| case REG_MICFIL_DATACH0: |
| case REG_MICFIL_DATACH1: |
| case REG_MICFIL_DATACH2: |
| case REG_MICFIL_DATACH3: |
| case REG_MICFIL_DATACH4: |
| case REG_MICFIL_DATACH5: |
| case REG_MICFIL_DATACH6: |
| case REG_MICFIL_DATACH7: |
| case REG_MICFIL_DC_CTRL: |
| case REG_MICFIL_OUT_CTRL: |
| case REG_MICFIL_OUT_STAT: |
| case REG_MICFIL_VAD0_CTRL1: |
| case REG_MICFIL_VAD0_CTRL2: |
| case REG_MICFIL_VAD0_STAT: |
| case REG_MICFIL_VAD0_SCONFIG: |
| case REG_MICFIL_VAD0_NCONFIG: |
| case REG_MICFIL_VAD0_NDATA: |
| case REG_MICFIL_VAD0_ZCD: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool fsl_micfil_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_MICFIL_CTRL1: |
| case REG_MICFIL_CTRL2: |
| case REG_MICFIL_STAT: /* Write 1 to Clear */ |
| case REG_MICFIL_FIFO_CTRL: |
| case REG_MICFIL_FIFO_STAT: /* Write 1 to Clear */ |
| case REG_MICFIL_DC_CTRL: |
| case REG_MICFIL_OUT_CTRL: |
| case REG_MICFIL_OUT_STAT: /* Write 1 to Clear */ |
| case REG_MICFIL_VAD0_CTRL1: |
| case REG_MICFIL_VAD0_CTRL2: |
| case REG_MICFIL_VAD0_STAT: /* Write 1 to Clear */ |
| case REG_MICFIL_VAD0_SCONFIG: |
| case REG_MICFIL_VAD0_NCONFIG: |
| case REG_MICFIL_VAD0_ZCD: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool fsl_micfil_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_MICFIL_STAT: |
| case REG_MICFIL_DATACH0: |
| case REG_MICFIL_DATACH1: |
| case REG_MICFIL_DATACH2: |
| case REG_MICFIL_DATACH3: |
| case REG_MICFIL_DATACH4: |
| case REG_MICFIL_DATACH5: |
| case REG_MICFIL_DATACH6: |
| case REG_MICFIL_DATACH7: |
| case REG_MICFIL_VAD0_STAT: |
| case REG_MICFIL_VAD0_NDATA: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config fsl_micfil_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| |
| .max_register = REG_MICFIL_VAD0_ZCD, |
| .reg_defaults = fsl_micfil_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(fsl_micfil_reg_defaults), |
| .readable_reg = fsl_micfil_readable_reg, |
| .volatile_reg = fsl_micfil_volatile_reg, |
| .writeable_reg = fsl_micfil_writeable_reg, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| /* END OF REGMAP */ |
| |
| static irqreturn_t micfil_isr(int irq, void *devid) |
| { |
| struct fsl_micfil *micfil = (struct fsl_micfil *)devid; |
| struct platform_device *pdev = micfil->pdev; |
| u32 stat_reg; |
| u32 fifo_stat_reg; |
| u32 ctrl1_reg; |
| bool dma_enabled; |
| int i; |
| |
| regmap_read(micfil->regmap, REG_MICFIL_STAT, &stat_reg); |
| regmap_read(micfil->regmap, REG_MICFIL_CTRL1, &ctrl1_reg); |
| regmap_read(micfil->regmap, REG_MICFIL_FIFO_STAT, &fifo_stat_reg); |
| |
| dma_enabled = MICFIL_DMA_ENABLED(ctrl1_reg); |
| |
| /* Channel 0-7 Output Data Flags */ |
| for (i = 0; i < MICFIL_OUTPUT_CHANNELS; i++) { |
| if (stat_reg & MICFIL_STAT_CHXF_MASK(i)) |
| dev_dbg(&pdev->dev, |
| "Data available in Data Channel %d\n", i); |
| /* if DMA is not enabled, field must be written with 1 |
| * to clear |
| */ |
| if (!dma_enabled) |
| regmap_write_bits(micfil->regmap, |
| REG_MICFIL_STAT, |
| MICFIL_STAT_CHXF_MASK(i), |
| 1); |
| } |
| |
| for (i = 0; i < MICFIL_FIFO_NUM; i++) { |
| if (fifo_stat_reg & MICFIL_FIFO_STAT_FIFOX_OVER_MASK(i)) |
| dev_dbg(&pdev->dev, |
| "FIFO Overflow Exception flag for channel %d\n", |
| i); |
| |
| if (fifo_stat_reg & MICFIL_FIFO_STAT_FIFOX_UNDER_MASK(i)) |
| dev_dbg(&pdev->dev, |
| "FIFO Underflow Exception flag for channel %d\n", |
| i); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t micfil_err_isr(int irq, void *devid) |
| { |
| struct fsl_micfil *micfil = (struct fsl_micfil *)devid; |
| struct platform_device *pdev = micfil->pdev; |
| u32 stat_reg; |
| |
| regmap_read(micfil->regmap, REG_MICFIL_STAT, &stat_reg); |
| |
| if (stat_reg & MICFIL_STAT_BSY_FIL_MASK) |
| dev_dbg(&pdev->dev, "isr: Decimation Filter is running\n"); |
| |
| if (stat_reg & MICFIL_STAT_FIR_RDY_MASK) |
| dev_dbg(&pdev->dev, "isr: FIR Filter Data ready\n"); |
| |
| if (stat_reg & MICFIL_STAT_LOWFREQF_MASK) { |
| dev_dbg(&pdev->dev, "isr: ipg_clk_app is too low\n"); |
| regmap_write_bits(micfil->regmap, REG_MICFIL_STAT, |
| MICFIL_STAT_LOWFREQF_MASK, 1); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int fsl_micfil_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct fsl_micfil *micfil; |
| struct resource *res; |
| void __iomem *regs; |
| int ret, i; |
| unsigned long irqflag = 0; |
| |
| micfil = devm_kzalloc(&pdev->dev, sizeof(*micfil), GFP_KERNEL); |
| if (!micfil) |
| return -ENOMEM; |
| |
| micfil->pdev = pdev; |
| strncpy(micfil->name, np->name, sizeof(micfil->name) - 1); |
| |
| micfil->soc = of_device_get_match_data(&pdev->dev); |
| |
| /* ipg_clk is used to control the registers |
| * ipg_clk_app is used to operate the filter |
| */ |
| micfil->mclk = devm_clk_get(&pdev->dev, "ipg_clk_app"); |
| if (IS_ERR(micfil->mclk)) { |
| dev_err(&pdev->dev, "failed to get core clock: %ld\n", |
| PTR_ERR(micfil->mclk)); |
| return PTR_ERR(micfil->mclk); |
| } |
| |
| micfil->busclk = devm_clk_get(&pdev->dev, "ipg_clk"); |
| if (IS_ERR(micfil->busclk)) { |
| dev_err(&pdev->dev, "failed to get ipg clock: %ld\n", |
| PTR_ERR(micfil->busclk)); |
| return PTR_ERR(micfil->busclk); |
| } |
| |
| /* init regmap */ |
| regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| micfil->regmap = devm_regmap_init_mmio(&pdev->dev, |
| regs, |
| &fsl_micfil_regmap_config); |
| if (IS_ERR(micfil->regmap)) { |
| dev_err(&pdev->dev, "failed to init MICFIL regmap: %ld\n", |
| PTR_ERR(micfil->regmap)); |
| return PTR_ERR(micfil->regmap); |
| } |
| |
| /* dataline mask for RX */ |
| ret = of_property_read_u32_index(np, |
| "fsl,dataline", |
| 0, |
| &micfil->dataline); |
| if (ret) |
| micfil->dataline = 1; |
| |
| if (micfil->dataline & ~micfil->soc->dataline) { |
| dev_err(&pdev->dev, "dataline setting error, Mask is 0x%X\n", |
| micfil->soc->dataline); |
| return -EINVAL; |
| } |
| |
| /* get IRQs */ |
| for (i = 0; i < MICFIL_IRQ_LINES; i++) { |
| micfil->irq[i] = platform_get_irq(pdev, i); |
| dev_err(&pdev->dev, "GET IRQ: %d\n", micfil->irq[i]); |
| if (micfil->irq[i] < 0) |
| return micfil->irq[i]; |
| } |
| |
| if (of_property_read_bool(np, "fsl,shared-interrupt")) |
| irqflag = IRQF_SHARED; |
| |
| /* Digital Microphone interface interrupt */ |
| ret = devm_request_irq(&pdev->dev, micfil->irq[0], |
| micfil_isr, irqflag, |
| micfil->name, micfil); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to claim mic interface irq %u\n", |
| micfil->irq[0]); |
| return ret; |
| } |
| |
| /* Digital Microphone interface error interrupt */ |
| ret = devm_request_irq(&pdev->dev, micfil->irq[1], |
| micfil_err_isr, irqflag, |
| micfil->name, micfil); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to claim mic interface error irq %u\n", |
| micfil->irq[1]); |
| return ret; |
| } |
| |
| micfil->dma_params_rx.chan_name = "rx"; |
| micfil->dma_params_rx.addr = res->start + REG_MICFIL_DATACH0; |
| micfil->dma_params_rx.maxburst = MICFIL_DMA_MAXBURST_RX; |
| |
| |
| platform_set_drvdata(pdev, micfil); |
| |
| pm_runtime_enable(&pdev->dev); |
| regcache_cache_only(micfil->regmap, true); |
| |
| ret = devm_snd_soc_register_component(&pdev->dev, &fsl_micfil_component, |
| &fsl_micfil_dai, 1); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register component %s\n", |
| fsl_micfil_component.name); |
| return ret; |
| } |
| |
| ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); |
| if (ret) |
| dev_err(&pdev->dev, "failed to pcm register\n"); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused fsl_micfil_runtime_suspend(struct device *dev) |
| { |
| struct fsl_micfil *micfil = dev_get_drvdata(dev); |
| |
| regcache_cache_only(micfil->regmap, true); |
| |
| clk_disable_unprepare(micfil->mclk); |
| clk_disable_unprepare(micfil->busclk); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused fsl_micfil_runtime_resume(struct device *dev) |
| { |
| struct fsl_micfil *micfil = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = clk_prepare_enable(micfil->busclk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_prepare_enable(micfil->mclk); |
| if (ret < 0) { |
| clk_disable_unprepare(micfil->busclk); |
| return ret; |
| } |
| |
| regcache_cache_only(micfil->regmap, false); |
| regcache_mark_dirty(micfil->regmap); |
| regcache_sync(micfil->regmap); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused fsl_micfil_suspend(struct device *dev) |
| { |
| pm_runtime_force_suspend(dev); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused fsl_micfil_resume(struct device *dev) |
| { |
| pm_runtime_force_resume(dev); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops fsl_micfil_pm_ops = { |
| SET_RUNTIME_PM_OPS(fsl_micfil_runtime_suspend, |
| fsl_micfil_runtime_resume, |
| NULL) |
| SET_SYSTEM_SLEEP_PM_OPS(fsl_micfil_suspend, |
| fsl_micfil_resume) |
| }; |
| |
| static struct platform_driver fsl_micfil_driver = { |
| .probe = fsl_micfil_probe, |
| .driver = { |
| .name = "fsl-micfil-dai", |
| .pm = &fsl_micfil_pm_ops, |
| .of_match_table = fsl_micfil_dt_ids, |
| }, |
| }; |
| module_platform_driver(fsl_micfil_driver); |
| |
| MODULE_AUTHOR("Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>"); |
| MODULE_DESCRIPTION("NXP PDM Microphone Interface (MICFIL) driver"); |
| MODULE_LICENSE("GPL v2"); |