| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2012 Altera Corporation |
| * Copyright (c) 2011 Picochip Ltd., Jamie Iles |
| * |
| * Modified from mach-picoxcell/time.c |
| */ |
| #include <linux/delay.h> |
| #include <linux/dw_apb_timer.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/clk.h> |
| #include <linux/reset.h> |
| #include <linux/sched_clock.h> |
| |
| static int __init timer_get_base_and_rate(struct device_node *np, |
| void __iomem **base, u32 *rate) |
| { |
| struct clk *timer_clk; |
| struct clk *pclk; |
| struct reset_control *rstc; |
| int ret; |
| |
| *base = of_iomap(np, 0); |
| |
| if (!*base) |
| panic("Unable to map regs for %pOFn", np); |
| |
| /* |
| * Reset the timer if the reset control is available, wiping |
| * out the state the firmware may have left it |
| */ |
| rstc = of_reset_control_get(np, NULL); |
| if (!IS_ERR(rstc)) { |
| reset_control_assert(rstc); |
| reset_control_deassert(rstc); |
| } |
| |
| /* |
| * Not all implementations use a periphal clock, so don't panic |
| * if it's not present |
| */ |
| pclk = of_clk_get_by_name(np, "pclk"); |
| if (!IS_ERR(pclk)) |
| if (clk_prepare_enable(pclk)) |
| pr_warn("pclk for %pOFn is present, but could not be activated\n", |
| np); |
| |
| if (!of_property_read_u32(np, "clock-freq", rate) && |
| !of_property_read_u32(np, "clock-frequency", rate)) |
| return 0; |
| |
| timer_clk = of_clk_get_by_name(np, "timer"); |
| if (IS_ERR(timer_clk)) |
| return PTR_ERR(timer_clk); |
| |
| ret = clk_prepare_enable(timer_clk); |
| if (ret) |
| return ret; |
| |
| *rate = clk_get_rate(timer_clk); |
| if (!(*rate)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int __init add_clockevent(struct device_node *event_timer) |
| { |
| void __iomem *iobase; |
| struct dw_apb_clock_event_device *ced; |
| u32 irq, rate; |
| int ret = 0; |
| |
| irq = irq_of_parse_and_map(event_timer, 0); |
| if (irq == 0) |
| panic("No IRQ for clock event timer"); |
| |
| ret = timer_get_base_and_rate(event_timer, &iobase, &rate); |
| if (ret) |
| return ret; |
| |
| ced = dw_apb_clockevent_init(-1, event_timer->name, 300, iobase, irq, |
| rate); |
| if (!ced) |
| return -EINVAL; |
| |
| dw_apb_clockevent_register(ced); |
| |
| return 0; |
| } |
| |
| static void __iomem *sched_io_base; |
| static u32 sched_rate; |
| |
| static int __init add_clocksource(struct device_node *source_timer) |
| { |
| void __iomem *iobase; |
| struct dw_apb_clocksource *cs; |
| u32 rate; |
| int ret; |
| |
| ret = timer_get_base_and_rate(source_timer, &iobase, &rate); |
| if (ret) |
| return ret; |
| |
| cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate); |
| if (!cs) |
| return -EINVAL; |
| |
| dw_apb_clocksource_start(cs); |
| dw_apb_clocksource_register(cs); |
| |
| /* |
| * Fallback to use the clocksource as sched_clock if no separate |
| * timer is found. sched_io_base then points to the current_value |
| * register of the clocksource timer. |
| */ |
| sched_io_base = iobase + 0x04; |
| sched_rate = rate; |
| |
| return 0; |
| } |
| |
| static u64 notrace read_sched_clock(void) |
| { |
| return ~readl_relaxed(sched_io_base); |
| } |
| |
| static const struct of_device_id sptimer_ids[] __initconst = { |
| { .compatible = "picochip,pc3x2-rtc" }, |
| { /* Sentinel */ }, |
| }; |
| |
| static void __init init_sched_clock(void) |
| { |
| struct device_node *sched_timer; |
| |
| sched_timer = of_find_matching_node(NULL, sptimer_ids); |
| if (sched_timer) { |
| timer_get_base_and_rate(sched_timer, &sched_io_base, |
| &sched_rate); |
| of_node_put(sched_timer); |
| } |
| |
| sched_clock_register(read_sched_clock, 32, sched_rate); |
| } |
| |
| #ifdef CONFIG_ARM |
| static unsigned long dw_apb_delay_timer_read(void) |
| { |
| return ~readl_relaxed(sched_io_base); |
| } |
| |
| static struct delay_timer dw_apb_delay_timer = { |
| .read_current_timer = dw_apb_delay_timer_read, |
| }; |
| #endif |
| |
| static int num_called; |
| static int __init dw_apb_timer_init(struct device_node *timer) |
| { |
| int ret = 0; |
| |
| switch (num_called) { |
| case 1: |
| pr_debug("%s: found clocksource timer\n", __func__); |
| ret = add_clocksource(timer); |
| if (ret) |
| return ret; |
| init_sched_clock(); |
| #ifdef CONFIG_ARM |
| dw_apb_delay_timer.freq = sched_rate; |
| register_current_timer_delay(&dw_apb_delay_timer); |
| #endif |
| break; |
| default: |
| pr_debug("%s: found clockevent timer\n", __func__); |
| ret = add_clockevent(timer); |
| if (ret) |
| return ret; |
| break; |
| } |
| |
| num_called++; |
| |
| return 0; |
| } |
| TIMER_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init); |
| TIMER_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc", dw_apb_timer_init); |
| TIMER_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp", dw_apb_timer_init); |
| TIMER_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init); |